Problem with headset in 2-node RAC

Similar Questions

• Grid Control 11g of the problems with the basic policy of RAC database

  We have a group of three nodes 11 GR 2 (rac1, rac2, rac3) and a policy based RAC database 11 GR 2 (ORCL) with cardinality 2 (ORCL_1 and ORCL_2) on this group. Used to monitor the Control 11g Grid infrastructure. Founded political RAC databases are linked to the pools of the server and not to the cluster nodes, therefore, restart the cluster database instances can run on both on 3 nodes in the cluster. For example, if ORCL_1 is running ORCL_2 and rac1 rac2 Sir after a full reboot ORCL_1 and ORCL_2 can be run on rac2 and rac3 respectively. Binding of the pool with two special nodes will be as if we use database RAC database administrator and not the policy based.
  
  Now the problem is that Grid Control registers the services in database with the node that is running the instance due to which, once the instances are started on a different node, she complained authorities are declining. We don't have to then reconfigure database instances and say Grid Control that they are now on another node. However, this removes the history of AWR for these instances.
  
  Is there a solution to this problem?
  
  Kind regards
  
  Kashif.

  Hi koko,.

  to work around this problem (I think that there is no "automatic" support in the current version of EM for switching hosts databases), you can create an ACTION_SCRIPT for your database cluster resource that is running the relocate_targets command emcli (so an emcli should be placed on all nodes of your and recorded with Super Administrator privileges). So every time you start your database resource, this script command / move the target to the current host without losing any historical information.

  Best regards
  Robert

  Edit: You can find an example of the command emcli in this document written by Rob Zoeteweij: http://oemgc.files.wordpress.com/2011/02/manage-node-failover-in-an-active-passive-setup-using-oracle-enterprise-manager-grid-control1.pdf
  In this scenario is an active/passive environment, but the command itself appies to your situation, too.

  Published by: Robert Hanuschke on August 1, 2011 13:11

• Problem with the Value property node (MacOS)

  Insofar that I tested it, the nodes of property Value (and value (signalling)) do not work under MacOS: value property is a Boolean value, the value (signaling) as a cluster (width, height).

  Even with the Boolean controls, the node does not work.

  Not such a problem in LV 8.6.

  Am I missing something? Is that some 'of use' ? Or just a bug?

  This looks like some sort of problem of indexing with the nodes property as somesort of corrupted installation.  What happens if you just delete the property node and recreate him?

  I filed a digital control and looked at the context menu of the list of the nodes property.  Below value and value (signs) are Visible (which would be a Boolean value) and Xcontrol, that when you bring through the submenus, the first choice is container bounds, a cluster of Width and Height.  If these 2 types of data which are located 2 below in the list match those you found.

  What happens if you take another node in property a few elements upwards or downwards in the context menu?  Fact is happen for other properties, and if so, are thereany properties who agree?

  Here's what look like my property for a digital nodes and I draggged the box up and down to show the natural order of the nodes property.  Notice that I have script installed, so there are a few other nodes property (and the blue box at the top) you may not have.

  

  PS. Verify you the signature.  Kudos button is now moved to the left since the update of the forum.

• Problem with headset with detachable microphone

  I use my 2 hyperx cloud helmet with my z3 and it works very well. However, when I detach the detachable microphone of the headset, the phone does not recognize the headset over and when I plug the microphone back it works fine.

  Y at - it means to solve this problem, because I want to just listen to music and do not want the microphone attached.

  BTW, the cloud 2 uses a single listener (audio & mic).

  I'm afraid I can't say for sure, but it might work if you force the output to the headset using the app party 3:rd SoundAbout since Google play.

  For more information, also see this thread: https://talk.sonymobile.com/t5/Wired-accessories/Hyper-x-cloud-2-headset/m-p/1038373#M925

• Problem with headset and speed dial combination blackBerry Smartphones

  My headset is a Bluetooth de Motorola 500. I can dial numbers on my speed dial list manually and via voice command and the headset works fine.  When I dial the same number to a speed dial I hear the dial unfold the headset turns off and I hear everything through the phone.  If I hang up and call another call, the headset is very good.  Verizon has replaced the phone thinking it was a hardware problem, but no change.  Did I miss a setting somewhere?

  In addition, since activating the new phone, the indicator message indicates 1 new message, but I have been through all the email and SMS accounts and cannot find anything unread.  Thoughts?

  If Verizon replaced the phone and you still get problems, there are two potential problems that create this problem:

  1. Your phone is not properly the pairing with the headset.  Once Verizon updated their operating system (OS), this can be resolved as bluetooth was supposed to be improved in later operating systems.
  2. Your helmet is simply not fully compatible with the phone.  I used a Motorola H680 headset and a BlackBerry HS655 + with my Storm and had no problems.

  My best guess?  It's probably a combination of 1 and 2 and I'm sure that's all just a related software.  My only suggestion at this point is to wait for Verizon update the operating system for your phone, or you might try an upgrade to another carrier if you wish.  Let us know if you need help with this, but be aware that Verizon doesn't have to endure phones running operating systems that they do not officially support (you can go back if necessary).

  Now regarding your second question, so is the message indicator an indicator of normal message?  If so, start by going to your Inbox main and made scroll down through the list of all messages to see if he is here... it could be a PIN message, or something similar.  It could also be a message to the call log.  Go to the phone application (press the green phone button), then to top at the top, click way to call log button.  You may very well have a failure called message it.  In addition, my next suggestion would be to simply try a battery pull.  While the phone is turned on, remove the battery for 15-30 seconds before reinserting.  Wait for the phone to reboot (~ 5 minutes) and then see if he disappeared.

  Keep us informed!

• Problem with formula node

  Hello

  I'm using LabVIEW 2012 and there seems to be a problem with the node of the formula. The output of a simple no operation is not correct.

  I have an input U8, whose value is 255. I apply a no operation (a = ~ a and the value returned by the formula node is also 255.)

  Is this a bug in the node or there at - it another way to calculate the bit DO NOT level?

  Thank you

  Ritesh

  You must use the function or exclusive.  So what you really need, is:

  a = a ^ 0xFF

  EDIT: Dig even more, it is called a 'top-up bit.  I consider cela a bug.  I see the same thing with 2011.

• Problem with node formula VI Eval

  I am having a problem with an error code in this exercise VI (Formulad node Eval VI), it gives me the error-23087 code, but this error code is not found anywhere on Forums or support, any help would be appreciated

  Paste this error code in the error dialog box explaining brought this:

  

  Lynn

• Problem with HP Premium Digital Headset (XA490AA)

  Hi, I bought very recently (a week back) a HP Premium Digital Headset (XA490AA) and it seems to work perfectly and has a great sound, but he had a problem. The right side of the headset, for no reason, will stop working then start working. For example, I'll use my computer for maybe a few hours to a full day, and then the right side will stop working. Then he started working as if by magic somehow.

  I remember the first day I bought it, there was a bit of a problem of balance. For some reason, kept her moving completely to the right, leaving the soft left.

  I have it plugged into different USB ports, but the problem persists.

  I search online and it seems that so far I'm the only one having this problem, and I would rather go back to where I bought it if I can solve the problem.

  I got a Logitech USB Headset, prior to that, and it worked fine.

  I use Windows 7 x 64 on a HP Pavilion Slimline.

  Malcharion, welcome to the forum.

  You did a great job of explaining your problem!  However, my search proved unsuccessful, too.  I guess that you are alone in this. Which tells me, is that there must be a problem with the headphones.  If it was one of the USB 2.0 ports, they would work in one of the other.  If there was a problem with the operating system, probably someone else would be to have a kind of problem; may not be the same as yours.

  You said that you do not want to go back to the dealer, but this may be your only choice.  If a new pair did the same thing, you know that the problem is in your system.  Please let us know if you get a new pair and how they work.  Just use this thread.

• Strange problem with BT Headset!

  Hello

  I have a very strange problem with BT headset.  My Z3 is model of official unlocked Docomo of SO - 01 G.  I got PlayStation Voxtube 500 BT headset BT version is THE 4.0.  This headset has been used with Nexus 5 (Android 5.1.1) without any problem and the battery last almost a week to stanby with a few minute talk time per day.  However, after not getting Z3 with Android 4.4.4, pairing with Voxtube has no problem.  Then, the battery is discharged within 4-5 hours stanby.  I tested it for 3 or 4 times, it has come down to that there must be something worng with the battery of the headset.

  So, I got with PlayStation representative claim (it is only a few months old).  Surprisingly, representative of PlayStation has all the test suggested no stanby time problem with their phones iPhone 5 or Sumsung Galaxy S5.  Then I took back recharged so its performance is very short wait duration the same as before.  So, I tested it with my iPad Mini 3 and performance return to normal standby time.

  So, it can be concluded for only problem is with the Z3. But once again with the mating with the other headset BT Jabra Tag2, stanby time is within the normal range (4-5 days).  When that happens?  I am very confused. Should I give up on PlayStation?

  Thank you for your time,

  Simply upgrade to 5.0.2 lolipop and hope this will help me on this issue.

• Problem with parsing XML with html as part of the node content

  Hi all

  I am facing problem with XML parsin when the node has a HTML content, if the node does not have any html content then it works fine. Similar analysis logic works for Java Standard, but not for the Blackberry API. I have an obligation to remove not HTML content prior to analysis. As that would display in the browser.

                            String xml="" +
                  "<p> Dummy content </p> " +
                  "" +
                  "";
                            DocumentBuilderFactory dbFactory = DocumentBuilderFactory.newInstance();
              DocumentBuilder dBuilder;
              Document doc;
              bis = new ByteArrayInputStream(xml.getBytes("UTF-8")); 
  
              dBuilder = dbFactory.newDocumentBuilder();
  
              doc = dBuilder.parse(bis);
              doc.getDocumentElement().normalize();
  
              NodeList nList = doc.getElementsByTagName("disclaimer");
  
              Element activeTagElmnt = (Element) nList.item(0);
              NodeList activeTag = activeTagElmnt.getChildNodes(); 
  
              tagValue=((Node) activeTag.item(0)).getNodeValue();
                            System.out.println(tagValue); //This prints "<" with HTML content. If i remove HTML then "Dummy Content" is printed
  

  If I need to remove html content, then I would need to reformat the content according to the HTML as the newline to a linebreak.

  Any suggestions would be helpful.

  Thank you

  Sandeep

  I feel xml parser was mature enough to handle these characters if sills, you get the error explore CDATA. It might help you.

• Hey guys I have a problem with my turtle beachs x 11 headset PC problem?

  Hey guys I have a problem with my turtle beachs x 11. I think that his problem of windows as it does say not connected when I pluged clearly on the front I see this using sound Manager in Control Panel. Only until you get the sound is to use the part of the Atrium is where I replace my listing of speaker with the turtle beachs taken for the helmet and it dosent read my forehead has the helmet thing and does not with headsets and its really annoying, so what is the problem you ask I can't use the front of a helmet branch so I need the change of the back 100% of the time and I need to switch between the headset and the speaker the only time where the before work is when I remove the speaker jack on the back and then I used his Manager in the control panel and it counts it as a speaker. I want to ask I want it where I can have my speakers work in the back and the front, I can have my headphones and when I want to spend in the speakers and just unplug the headphone part in front of the help I can't keep my pc like this: /.

  What kind of PC you are using? Home build or OEM (DELL, HP, etc.)?
  -If the house built.
  The cable between the Panel before you must have two different connectors to the motherboard.
  You must use the right connector, as we'll pass the speakers turned off when you the helmet
  is plugged into the front panel and the other not.

  If OEM - check support or forums from the mfg.

• Two-node Rac (11204) Cluster node 1 has failed to stop with error: impossible to get in touch with the loan of cluster service. duty to force stop

  Newly build Production environment (don't use it yet)

  OS: Linux redhat 64-bit 2.6.18

  Cluster version: 11.2.0.4

  This environment clusterware installed last December, we are trying to install oracle RDBMS, so try to first stop the crs.  However on node 1, the v$ asm_diskgroup shows nothing under total_mb /free_mb on diskgroup OCR.  and stop the crs shows: impossible to get in touch with the loan of cluster service.

  Alerts cluster log shows below:

  2014-03-25 03:50:01.429:

  [crsd (8608)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u00/app/11.2.0.4/grid/log/oprd100/crsd/crsd.log.

  2014-03-25 03:50:01.433:

  [crsd (8608)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

  ]. Details at (: CRSD00111 :) in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.)

  2014-03-25 03:50:02.123:

  [ohasd (12490)] CRS - 2765:Resource 'ora.crsd' failed on the server "orpd100".

  2014-03-25 03:50:03.407:

  [crsd (8623)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.

  2014-03-25 03:50:03.411:

  [crsd (8623)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

  The NEWSPAPER of the ASM alerts:

  Wed Mar 25 03:21:49 2014

  WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

  WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

  WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

  WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

  Wed Mar 25 03:21:49 2014

  NOTE: process _b000_ + asm1 initiating (21071) 1.1807368888 disk offline (OCR_0681_2EF4) with mask 0x7e in Group 1

  NOTE: process _b000_ + asm1 initiating (21071) 2.1807368889 disk offline (OCR_0681_2EF5) with mask 0x7e in Group 1

  NOTE: check PST: grp = 1

  GMON seeking ways of disc for Group 1 to 5 pid 27, DiSo 21071

  ERROR: read no quorum within Group: required 2 found 1 records

  NOTE: audit PST grp 1 fact.

  NOTE: start the PST update: grp = 1, dsk = 1/0x6bba42b8, mask is 0x6a, op = clear

  NOTE: start the PST update: grp = 1, = 2/0x6bba42b9 dsk, mask is 0x6a, op = clear

  GMON update modes of disk for the Group 1 to 6 for 27, DiSo 21071 pid

  ERROR: read no quorum within Group: required 2 found 1 records

  Wed Mar 25 03:21:49 2014

  NOTE: disassembly of the cache (not clean) Group 1/0x35AAB27B (OCR_DATA)

  WARNING: For disk offline OCR_0681_2EF4 0x7f mode failed.

  2 node rac cluster is normal.  We were able to stop the crs without force.

  What should I look at to understand what is happening here?

  Thanks to adavnace.

  WARNING: For disk offline OCR_0681_2EF5 0x7f mode failed.

  NOTE: e-mail CKPT suspend pins Unix process pid: 21073, image:

  No default value is 1 M

• What is the problem with the sequences on RAC environments?

  Version: 10 g, 11G
  
  I've never worked on CARS. But I keep seeing discussions about the problems with the sequences on CCR environments. What exactly is the
  basic question?

  Can be performance issues if you have a large number of sequences of nocache as it may cause heavy IO for the system tablespace.

  Given that each instance will have its own cache seqeuence that some sites are unhappy with significant gaps in the values, this can cause.

  There was also a blocking problem caused by heavy simultaneous new connection activity requiring the issuance value audsid for the session of v$. To solve this just to the top of the cache size to 1,000 or 10,000 by default if you are on a version where the value was not moved upward by Oracle already.

  As far as the first two numbers go that my view is if the sequence does not need to be cached you need not use a sequence to generate value. If you need a value without interval then you need to get your value from a table column value that is part of the transaction and do not use a sequence in a first time.

  Sequences are designed for speed and concurrentcy, and this competition is priced at gaps.

  HTH - Mark D Powell.

• Connection speed slow on one node to a node RAC 2 put in place

  Hi all

  Having a little trouble with one of the nodes in a node 2 CARS set up
  We have sent traffic directly to the node in question (using a service that runs only on node 1)

  Forced connection to this node (sqlplus) since an application server remote takes 3 times as long does if we force fitting to the second node RAC.

  If I try to connect locally - connection speed is instantaneous-

  There is NO problem with the server performance

  There is NO problem with the perfromance instance / database - it is only noticed when the initial connection

  I've been in the network of the node and can see nothing wrong - so I was wondering if there was anything you guys might have experienced while the connection time is slow for a single node only (949 ms - compared to 247 ms on node 2)

  If anyone out there is interested or falls on this issue

  The problem has proved to be the mount point options MP Linux Volumes

  I had configured them as part of best practices for RAC / NetApp / Direct NFS - hjowever I also got the binaries for both nodes in order to have greater availability.

  Thereffore I would have had the Mount for NŒUD UNIQUE options.

  The change was to

  -stop the instance

  -unmoiunt binary files

  -change the following on fstab

            NFS rw, bg, hard, nointr, rsize is 32768, wsize = 32768, tcp, to = 3, timeo = 600, actimeo = 0 0 0

  TO

            NFS rw, bg, hard, rsize = 32768, wsize = 32768, to = 3, nointr, timeo is 600, tcp

  -start the instance and repeat on node 2

• installation of grid control Agent (11.1) on a node RAC 2 (11.2)

  Hi, I am preparing an installation of push (11.1.1) Agent of the grid on a 2 DB of RAC (11.2.0.3) node as user 'oracle '. Is there a problem with using id 'oracle' for push Agent too? (oracle is the owner of the RAC cluster too).
  
  Kind regards
  Lily

  Hi Lily,

  You can use the accounts to the same users or different OS to install a database, a CMS or an agent. If you use different user accounts, ensure that the owner of the agent software is in the same group of BONE as the owner of the software of the monitored targets (for example to read the file journal alert a target database).

  Kind regards
  -Loc