Problem with USB is corrupted driver.

Similar Questions

• Problem with USB 2.0 Driver

  I'm having a problem with the USB 2.0 driver. Whenever I connect my USB drive, I get a notification of an unknown device and I also used the troubleshooter to solve problems, but he said-

  An unexpected error has occurred. The Troubleshooting Wizard can not continue.

  Identifier of the package: DeviceCenterDiagnostic

  Path: unknown

  Error code: 0 x 80070002

  Source: engine

  User: Chinmaya-PC\Chinmaya

  Background: high

  Every time that I find this error code while troubleshooting the USB 2.0 driver. I even tried reinstalling the driver, but it's the same thing over and over again. I also tried to install Microsoft Fix it, but it won't install, it says "Microsoft Automated Troubleshooting Services BootStrapp has stopped working". Someone at - it this same error? I can't even connect a USB on my computer because of this error.

  If anyone has an answer, I would be very happy to know.

  Hello Chinmaya,

  Thank you for the update on the issue.

  Before any change in the registry, I highly recommend you back up the registry. You can see How to backup and restore the registry in Windows as described in the previous answer.

  UpperFilters and the LowerFilters are assigned values in registry keys. Upper filter drivers go between the operating system and the principal driver, and the lower filter drivers between the driver and the hardware.

  You can try the suggestion and let us know the result, we will be happy to help you.

  Thank you.

• Satellite M70-190 - problem with USB

  Hello!
  After you uninstall Windows XP and BIOS update, I have a problem with the USB ports. My work does ' t of USB flash drive. Windows also find a USB flash drive, but I can't find it in "my computer".
  If anyone idea about this problem?
  PS, External HARD drive works perfectly, as the USB mouse and USB WiMax modem.
  I m hoping someone out there can help with this problem.

  If I understand you well you don't have problem with USB port, but with a single USB device. Right?

• Big problems with USB devices

  Since I upgraded to El Capitan I have several, serious problems with USB devices:

  1 USB hard drive: everything by watching a video from an external hard drive, the hard drive will be to disassemble all the minutes, the video will be of course hang and it takes 45-60 seconds until the drive reconnects. I also can not boot from any external hard drive more. Booting from a USB key works fine.

  2. I can't transfer my Sunny BT11 of beam data more. The Sunny Beam is a device that records the data of my photovoltaic plant. The overview of the system he sees when connected via USB, however he is not recognized and so I can't transfer data files. Also, it makes not a difference if it is connected via a USB hub or directly, the two versions do NOT work. In the Finder preferences, all devices are controlled to display on the desktop.

  The two scenarios always perfectly work with my Mac mini that has not been updated and uses Mac OS X 10.10.

  Hello Gulliver,

  It seems that if you live with loss of connection of your USB devices since the installation of Mac OS X 10.11 El Capitan, is that correct?

  I suggest that you are troubleshooting by following the steps in this article - OS X El Capitan: If a USB device does not work

  Thank you for using communities of Apple Support.

  Sincerely.

• Problems with USB 3.0

  Hello people!

  I'm here with a need for help to solve a problem that I recently got after reinstalling my windows 7.

  The problem is with USB 3.0 driver, which does not react to any device I plug on two of the ports, and they are not dead I checked that. I tried to re - install USB 3.0 drivers as well and downloaded from HP site for my model, the latest version has failed so I tried with the other older and did not work as well. Only my two USB 2.0 ports work.

  I don't know if there are any other versions or drivers that I could use, those for my model don't work for some reason, and this is the first time I did re-installation of windows for that.

  I would be very grateful if someone could help me solve this problem!

  The laptop model is HP Pavilion dv7 - 6113cl

  Kind regards

  Ed1Ross

  Hello

  Uninstall all the existing USB drivers and then try to install the drivers from this link:

  AMD Chipset drivers

  Restart and check.

• HP 1350 printer peripheral will not stay in offline mode. Problems with the Wi - Fi driver

  Hi I have a Dell desktop with printer HP 1500 computer.  After printing several documents, the printer has gone offline.  Troubleshooting indicates the problem with the Wi - Fi driver.  The printer is connected to the computer makes a Wi - Fi connection has to do with it?  I have add a portable Wi - Fi system recently.

  Hi, Mt48,

  Is the printer a 1350 aio or deskjet 1500?  You have listed two different models.

  Windows operating system?

  To resolve this problem, perform the following steps:
  1. Right-click on the my computer icon and choose manage, then click Design Manager.
     In the currency Manager there will be the USB root hubs (there may be several USB root hubs) perform the following steps for all root hubs:
  2. Right click on the USB root hub and go to properties, then the power management and uncheck 'Allow the computer to turn off this legacy to save energy' in the Design Manager.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=UK&TaskID=110&prodSeriesId=439153&prodTypeId=18972&ObjectID=c01475742

  Monofunctional and multifunction printers - HP printer is offline message appears on the computer and the HP product does not print

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02221706&lang=en&cc=us&TaskID=130&ContentType=SupportFAQ&prodSeriesId=306884&prodTypeId=18972

  Look for your version of Windows and select printing HP and the Scan Doctor - this is a diagnostic utility

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=306889&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=306884

• My window 7 showing message "a problem with the NVIDIA Graphic driver", but I can't download the solution

  My Windows 7 PC at home keep crashing and I keep losting my screen when I played the game on the last 6 months.  After I restart my PC, it says that there was a screen.   I had since a few Update window update driver and try the NVIDIA drivers with no will.  There were a few times he were message indicating the "resolve a problem with the NVIDIA graphics driver" on the taskbar.  When I click on the message and try to download.  It gives me the message that "your computer was not able to download the solution at this time.  Make sure that your computer is connected to the internet, and then try to download again"that had happen all the time, and of course, I had access to the internet all the time!  I'm getting nowhere for solve this problem.  Can anyone help?  I want to know if there is something I need to know the video driver as usual outside the upgrade.

  PS I tried a lot of stuff, running the troubleshooter from the performance.  I had an i7 with plenty of RAM, running only a few program, hard disk error not... etc.  It seems related to the video driver. I update my window.

  Hello Lewie,

  Thanks for posting your query in Microsoft Community Forum.

  1. What is brand and model your computer?
  2. You did it any significant hardware or change software on the computer before this problem?

  I understand that you lose your screen when you play a game. This happens usually if the installed graphics driver has corrupted or unstable. Therefore, I suggest trying the following methods and check if the problem persists.

  Method 1: Run the tool material and devices

  Try running the next fixit and check whether the problem is resolved.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: Update your graphics card

  1 open Device Manager by clicking the Start button, click Control Panel, click System and Security, and then, under System, click the Managerof peripheral . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in the list of hardware categories, find the display adapters and select the device driver you want to update, and then double-click the device name.

  3. Click tab driver , click Update driver, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, visit the below mentioned link:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you are not able to update the device driver via windows update, you can visit your computer or graphics card manufacturer (NVIDIA) Web site and download & install the latest driver. Or contact the manufacturer of your system to do.

  For reference, you can also consult the following Web page. Click on continue to this site Web (not recommended) if you are prompted for any error of certification.

  A problem of NVIDIA graphic driver

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Problem with USB HUB using Windows 7 on Bootcamp

  I have an iMac when I installed Win 7 with Bootcamp. I have problem with USB hub. If I connect USB devices (printer, iphone... etc...) directly to my computer, it works without any problem. But if I connect them through USB hub, that they do not work properly. The sound instantly invites you, but certain peripheral functions partially and some not at all. I tried several USB hubs... same problem for all. Any solution? Thanks a lot for your answer.

  Hello

  I suggest you to see link and check.

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  I also suggest you to contact the apple support and check.

  http://www.Apple.com/support/

• I click on "Fix a problem with the NVIDIA graphics driver" and he says: "this solution could not be downloaded.

  I click on solve PC problems (the flag) and it says address a problem with the NVIDIA graphics driver. I click it and it says:

  This solution could not be downloaded

  --------------------------------------------------------------------------------

  The most likely causes:
  Your computer was unable to download the solution at this time. Make sure that your computer is connected to the Internet and then try to download the solution later.

  --------------------------------------------------------------------------------
   
  I am connected to internet, and the works, works etc of web browsing of windows update. Why it is not downloading the solution?

  Download and install the latest driver for your graphics card nVidia.

• X230T USB 3 port sleep problem with external Blu - Ray drive

  Hi all

  I bought a new LG external blu - ray drive and I have problems with it sleeps very quickly.  It is recognized in Windows 7 and will be available for a short period of time after I turn it on, but if I don't use it for 30 seconds, it's in a kind of fashion 'sleep'.  It works perfectly on the single WE port 2.0 on the X230T so there must be something with the 3.0 port.  The drive is powered by an AC adapter and USB 3.0 cable included one.

  I tried to disable all the properties sleeping USB in all areas of power management and power options in Windows.  Also enabled and disabled USB hub root energy saving.  Also, I went through the BIOS and threw the USB options as well and can't find why it is go to sleep so quickly.  I have the latest firmware on the drive, as well as the latest drivers Lenovo USB 3.0 for the X230T.

  I guess I'm out of luck at this point because I think I've tried all possible solutions?

  Thank you.

  Hi again,

  I have looked on the specs and do not see why this problem should occur. I would make sure that the BIOS is updated, if you have not already. The latest BIOS for your machine is 2.03 and came out a month ago. This update, you can find here. And if this does not work, can you check and publish what are the settings in your BIOS Config > USB Configuration?

  Best,

  Adam

• problem with USB driver in windows 8

  I use winsows 8 in hp probook 4440 s with processor i3.  Recently I have a problem with my usb ports 3. they do not react like usb 3 and most of the time does not at all. I looked for a host controller driver expandable usb 3 for windows 8, but can't find anywhere because it is built with windows 8. Where can I find the driver or what can I do now?

  Hello

  Check with HP Support, their drivers and documentation online and ask in their forums
  on known problems. The drivers are from HP. update the BIOS, chipset and the major
  device drivers embedded and separate that may affect the USB.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ====================================================

  Update driver and troubleshooting details (don't forget to check for BIOS, chipset,

  (and other drivers):

  Microsoft - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  What happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  Check with the manufacturer of system (manufacturer of motherboard for customized systems) updated
  the BIOS, chipset of low level driversand the major device on-board and separate
  drivers. Execute DriverView - value VIEW drivers Microsoft hide - updated from those
  without drain to their name.

  -Free - DriverView utility displays the list of all device drivers currently loaded on your
  System. For each driver in the list, additional useful information is displayed: load address
  of the driver, description, version, product name, company that created the driver, and
  more.
  http://www.NirSoft.NET/utils/DriverView.html

  To check system drivers manufacturer as replacements and camera manufacturer who are most
  current. Control Panel - device - Display Adapter Manager - note the brand and
  fill out the template tab of the driver for your card video - double-click - write down the
  the version information. Now click on UPdate Driver (this can do nothing as MS is far behind
  certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver
  stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if
  3rd party with their own software and drivers and the other main device drivers you
  a.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), and then
  Site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions.
  (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT
  After each installation.

  Always check in the Device Manager - drivers tab to be sure the version you install
  actually arises. This is because some restore drivers before the most recent is installed
  (particularly that audio drivers) so install a driver - reboot - check is to be sure
  installed and repeat if necessary.

  Repeat BTW to the manufacturers - manufacturers of devices DO WORK DO NOT THEIR SCANNER-
  manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Problems with USB devices in Windows XP Mode on Windows 7 Pro

  I have a Palm Zire 21 that I use with ACT! Contact Manager to keep track of my appointments.  I was able to sync the Palm with my ACT database until this week. The device appears on the list of USB devices, but does not connect to Windows XP mode.

  I used this device in XP Mode since August without any problem.  Last week, I started having problems with the integration of XP features and had to uninstall and reinstall the integration features a few times.  I think I have a corrupted somewhere driver.

  Any help would be appreciated.

  No need to comment unless you have more insight.

  I solved the problem myself.  In XP mode, I went to the Device Manager and scroll down to USB controllers.  A virtualization USB bus drivers showed a problem.   I uninstalled this device and then managed to reinstall my Palm correctly after connecting it to the USB port, and then going back to the menu at the top of the XP USB mode screen and hit connect when I saw my camera.  The device connected in XP automatically and I was off to the races.

• Problem with USB on the computer.

  Hi, I'm not very good with computers at all. I have a HP pavilion which all works fine until the other day, now it may just be a coincidence but I plugged my iPhone for the first time and since then none of my USB devices are appearing when I plug them in. his making the noise, but its all just not appearing on my Explorer of files of any suggestion?

  Hello

  Check their documentation online with the HP Support and drivers, diagnostics and ask to their
  Forums about known problems.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Also check with iPhone Support as there may be a problem with this phone.

  iPhone Support and community
  http://www.Apple.com/support/iPhone/

  ====================================================

  Troubleshooting you can try:

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Windows key + X (or right click in the lower left corner) - (Admin) command prompt

  C:\Windows\System32\ >

  At the prompt, type in SFC/scannow above
  (There is a space between C and /)

  How to run the command "SFC/scannow" at startup or in Windows 8
  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  -----

  Then run CheckDisk (chkfdsk/f/r)

  File (formerly Windows Explorer)

  Right click on drive C: - Properties - tab tools - error checking - Check

  Windows 8/8.1 - improve performance by optimizing your hard drive - see "to repair a drive:
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  How to check a drive for errors with "chkdsk" in Windows 8/8.1
  http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are identical (and
  Windows 8/8.1)
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ------------------------------------------------------------------------------------------------

  Install USB 3.0 and other USB devices
  http://Windows.Microsoft.com/en-us/Windows-8/install-USB-3-USB-devices

  Hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Set up your PC - configure your devices
  http://Windows.Microsoft.com/en-us/Windows-8/set-up-devices#1TC=T1

  Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  What happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ===================================================

  If necessary:

  Try to do a "Refresh you PC without affecting your files" (or modification of your personal data
  settings) or even a restore.

  Windows 8/8.1 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8/8.1
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8/8.1
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP 255 g4: problem with USB and SM Bus controller

  I have a problem with the (USB) Universal Serial Bus controller and SM Bus controller.
  System identifies them.

  
  I installed all the drivers for my noutbook of this site, but it does not work...
  Please, help me!

  I believe that these devices are based on the AMD chipset driver package... USB 3.0 and SMBus Controller:

  http://support.AMD.com/en-us/download/chipset?OS=Windows%2010%20-%2064

  Top package. @Paul_Tikkanen will know for sure.

• Satellite C650 problem with USB ports

  Hello

  I have a problem with my laptop, with my USB ports.

  A few days ago, I plugged my mp3 to charge its battery. I did when system Windows began and after a few ports seconds has stopped working. They work for one to five minutes after starting my computer, but only after my laptop's turn off for a few hours at night for example.

  They work fine and all of a sudden we hear the sound of a disconnected device and usb ports turns off. I tried many solutions but nothing worked. I removed all the USB ports in Device Manager.

  I checked in the BIOS, but everything seems to be okay. I tried to disable the disconnection of usb ports to save energy, nothing. Tools that have been provided by Toshiba to check hardware see as usb ports work correctly. Only usbdview program sees as unknown device, I tried to uninstall it through this program but still nothing.

  You have an idea, what could happen? Or if there is no possibility to fix without service visit?
  I would appreciate your help.

  Hello

  Have you tested these ports USB plug a USB mouse or a USB keyboard?
  These devices work properly?

  I don t think you need a visit to the service.
  I think that it s just a software problem
  Given that the USB ports are controlled by the chipset, I would recommend reinstalling/updating the chipset driver

  The alternative is a bit drastic, I think about the recovery of the laptop...
  It might be possible that the registry has been confused upward or some 3rd party software preinstalled on the laptop could affect the USB ports.

  I remember that my USB ports do not work after installing iTunes.
  I had to reinstall the operating system once more to get the USB port work even more funny is that I installed iTunes once more and USB worked correctly