Problema Networking VM

Similar Questions

• Outlook Express 6: your server has unexpectedly ended the connection. The potential causes for this include server problems, network problems, or a long period of inactivity. Error number: 0x800ccc0f

  Original title: Windows XP and Outlook Express 6

  I have a new computer with outlook express and went through the set up instructions.  When I tried to send a test email, I got this error message:

  "Your server has terminated suddenly the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Account: 'pop.mail.yahoo.com', server: 'pop.mail.yahoo.com', Protocol: POP3, Port: 110, secure (SSL): Yes, error number: 0x800CCC0F. »

  How can I fix this error message and have e-mail sent via Outlook?

  Hi Jeanette Logan,
   
  Here is an article that addresses this issue. Follow the steps listed in the article for this problem:
   
  Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express

• Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity.

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Topic "business profile]', account:"pop.bizmail.yahoo.com", server:"smtp.bizmail.yahoo.com"', Protocol: SMTP, server response: ' 451 see http://pobox.com/~djb/docs/smtplf.html. ', Port: 25, secure (SSL): no, Server error: 451, error number: 0x800CCC0F"

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Topic "business profile]', account:"pop.bizmail.yahoo.com", server:"smtp.bizmail.yahoo.com"', Protocol: SMTP, server response: ' 451 see http://pobox.com/~djb/docs/smtplf.html. ', Port: 25, secure (SSL): no, Server error: 451, error number: 0x800CCC0F"

  You must make a few changes, not only on outgoing parameters, your incoming parameters also need changes.

  Open your e-mail program > tools > accounts > your bizmail account > properties > servers, under outgoing mail server, check "this server requires authentication" > apply > advanced, under outgoing (SMTP) mail change to 465 not 25. Put a check mark on "this server requires a secure connection (SSL)" > under incoming (POP3) mail, change it to 995 no 110. Put a check mark on "this server requires a secure connection (SSL)" > OK

  t-4-2

• Card problem NETWORK M30, exchange of memory + HDD replacement

  Hello
  The first problem is with the network card in my laptop. It seems to work OK in windows (it looks fine in Device Manager, I can change settings etc) but it doesn't recognize any cable. I must say that I have enough experience on the networks. I tested the two straight through and crossing of the cables that work in other systems. I connected to a switch with a straight through cable, but don't see the network card. No. led flashes on the card (before he did)... nothing. It says "disconnected network cable" on the status bar. If I use a usb instead, with the same parameters and cable network card, everything is I checked the card using a cd live linux. It can identify the map, but I can't ping it and of course it is not regognise no cable.
  I'm 99% sure that it's a hardware problem. It is covered by the limited warranty of 2 years, right? The main question is: is the card integrated on motherboard of the laptop? Should I change motherboard too, in order to correct the network card?

  The second "problem" is a memory module. I checked with utility of a toshiba who said that the ram is faulty. Toshiba service sent me information for the Exchange since 09.11.2004 with the State shown above:
  Current status - Description
  Announcement - gathered information on the unit and the customer and the service center was informed. The unit did not here yet.

  Can someone help me with this? I'm looking for when the module will be available? I can't be based on a faulty ram memory!

  And one last question. I would like to change my hard drive for a faster. I can change it myself or it will cause a problem with the warranty?

  Thank you for your time.

  Hi sub,.

  You're right about the guarantee. Your machine is trembling warranty of 2 years. If the network card is faulty it can not be changed separately. You need to change the motherboard. Be careful with warranty. Do not change the only hardware components. You can lose it.

  In your case, there are a few hardware problems. In my opinion the best way is to contact the after-sales Service of Toshiba partner. Visit this link
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
  Good bye

• HP ProBook 470 G2: Problem network - Realtek RTL8723BE 802.11 b/g/n WiFi Adapter

  I bought ProBook 470 G2 with pre-installed Win 8.1 Pro and professional office 2013 a few days ago. Today my wireless card started acting weird. I lost the connection in a workplace and when I tried to reconnect I could not find any available network. I checked on my phone - 6 available Wi - Fi networks.

  I tried to uninstall and reinstall the card, with or without deletion of software. I reinstalled same OS and started from scratch but still nothing. Sometimes I can connect by Wi - Fi only for a second, then right again.

  Any ideas?

  Thank you in advance,

  Sinisa

  Hi, Sinisa:

  See if installing the latest driver for this card solves the problem.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_147415_1

  If not, I recommend that you report the problem to HP technical support, if your laptop is still under warranty (which should be if you just).

  There is a problem with the card wireless itself.

• Problem network/Gaming

  I have a problem where internet browsers work absolutely fine, videos stream quickly and content downloads very well. When I try to use msn, however, it cannot connect. It is the same for a program called xfire that I use to connect with other players. In addition, Call of Duty 4 seems to have a problem where the servers in the list of servers have a very high latency when I update sometimes, and sometimes at low latency servers appear. When I connect to a server, it says "pending connection", has reached 11 then says 'could not connect to server ". Sometimes I can get into the game, but it lags so that I can't do anything, and he says "connection interrupted" and has an icon at the bottom of the screen.

  I use a wireless network and a laptop if that helps.

  Any suggestions on how to solve this problem would be appreciated.

  Uh, yes I tried to diagnose and repair and it said no problems were found.

  On msn, I click 'troubleshoot' and he says everything is working except the ports...

  Hello

  is it maybe possible to revert to a backup, systemrestore? Tools > manage add ons, options check those. is there any parental or suites of software for the user control or then?

  erase history and reboot and try to http://onecare.live.com/site/en-us/center/whatsnew.htm

  run to make sure a diskcheck also, click computer, do a right click, properties, tools, error checking, and flag them both, restart. NOTE / according to your mem it can last a few hours (!)

  What browser do you use? If all else fails the answer is a support ticket. Try diskcheck leaves first, run while going to bed or two.

  Good day

• Problem network two computers together

  Home network with two computers, both running XP Home edition.  The two computers connected (wired) to a single router.  An external network, also on the network drive.  In the past, everything works perfectly.  Computers have been able to share files.  Computer could print via printers shared on computer B.

  Current condition.  Computer A cannot access the file or print sharing on computer B.  Computer B can access A computer as always.  Computer cannot ping computer B, but B can ping A.  Both computers have no problem asccessing the network drive.  Both computers have the same workgroup name.  I tried to run the wizzard of configuration network several times, making sure that the workgroup name is set correctly, but without success.  The message I get is: "workgroup is not accessible.  You can not have the permissions to use this network resource.  Admin contact...  Network not found path.

  The problem may have started after an update of McAfee antivirus software.  I tried to disable Firewall (McAfee and windows) on computer A and even uninstalled McAfee, but still can not computer A to do B.

  Of course, any help on where to find would be appreciated.

  Home network with two computers, both running XP Home edition.  The two computers connected (wired) to a single router.  An external network, also on the network drive.  In the past, everything works perfectly.  Computers have been able to share files.  Computer could print via printers shared on computer B.

  Current condition.  Computer A cannot access the file or print sharing on computer B.  Computer B can access A computer as always.  Computer cannot ping computer B, but B can ping A.  Both computers have no problem asccessing the network drive.  Both computers have the same workgroup name.  I tried to run the wizzard of configuration network several times, making sure that the workgroup name is set correctly, but without success.  The message I get is: "workgroup is not accessible.  You can not have the permissions to use this network resource.  Admin contact...  Network not found path.

  The problem may have started after an update of McAfee antivirus software.  I tried to disable Firewall (McAfee and windows) on computer A and even uninstalled McAfee, but still can not computer A to do B.

  Of course, any help on where to find would be appreciated.

  Have you used the Tool McAfee Consumer Product Removal?  If this is not the case, do.

  Both computers have at least one account with the same name and password?

  A very old (but XP has been around for a long time) message by Malke MVP MS:

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus with "Internet Worm Protection" (like Norton 2006/07) which acts as a firewall, you're fine. With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this. The instructions on this link work for XP and Vista: set up Windows for the connection automatically (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.

• Problem network and restore do not work.

  I have a computer that I used throughout the past two years.  I have programs on it to keep and I also have pictures and emails, I don't want to lose.  I don't know it's a software problem, I know because I bought another hard drive identical to the one I had installed inside and reloaded windows Xp and drivers everything works fine. I noticed that the last night, I used this PC when I went to turn off windows indicates there is a notification of update, I went ahead and let him do his thing the next day is when the problem manifested itself to the power upward.  I tried to immediately restore no good just stop. The next thing I noticed is that there no Favorites showing network, my ethernet went, my card controller spent, wireless no internet connectivity at all.  My question is - what the machine starts fine and a files seem normal y at - it an easy solution for this without completely formatting and reloading windows so I won't lose my programs I do not have access to the original disks to recharge?

  Hello

   
  1. What are the updates that have been installed recently?  Provide us with the number of these updates?
  2. What is the brand and model of the computer?
  3. you receive an error running the system restore?
   
   
  Method 1:  Try to perform a restore of the system into safe mode with command prompt.
  How to start the System Restore tool by using the option of safe mode with the command prompt in Windows XP
  http://support.Microsoft.com/kb/304449
  
  If this does not help, you can consult this article to troubleshoot the System Restore tool.
  http://support.Microsoft.com/kb/302796
   
  
   
  Method 2: Wi - Fi and in Windows network connection issues
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03
   

• Windows 7 network problem (network computers and devices slowly filling)

  When I started > network, the list of devices fills very slowly.  A loading bar going across the top for about 30 seconds to a minute and devices do not show up until the bar is almost completely through.  Must not fill as they are discovered... and why is taking so long?  Also navigation within folders my network is just as slow and large file transfer is slow as well.

  Thanks for your time,

  Matt

  Hi Matt,

  Every time that you open the network list, Windows is designed to rescan the network for devices. Unfortunately, this is normal and there is not much I can do to change that.
  Of course, plenty of time to detect devices and transfer files can definitely be caused by the type of network. You are currently connected via a cable ethernet or WiFi?
  Also, try to update the drivers for your network card and see if that helps. It would also be a good idea to try the connection in SafeMode with networking to see if the problem persists.
  Hope this helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem network card under Windows 7 Enterprise 32-bit

  Hello. In our Organization a few days, the following problems occur. Windows 7 32 bit installed on a machine intel NIC 82579lm lost communication. This thing happened to 12 32-bit machines. TCP/ipv4 Protocol is inactive. Reinstall the drivers, but the result is the same. At the beginning of the Working Group network card live cd. Restore point a mistake that does not unfortunately. Help, please.

  We found that a temporary solution begins at the point of restoration from the installation CD. So stop updates. Most likely, the problem is updated after the 22/10/2013.

  Hello

  Here are some tips that I wrote on Vista and Windows updates.

  It also applies to Windows 7.

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the "bad" for your configuration, unless you read the information on the number of special KB and what it is for.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

   

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• Realtek RTL8188CU wireless 802.11n USB 2.0 LAN adapter problems network

  I tried to get this card to work because I restored my computer to a factory State and reinstalled manually updates all programs a. The convenience store said...

  There might be a problem with the driver for the wireless network connection card Detected

  Windows could not automatically bind the Protocol IP on the network card stack.

  I tried to reinstall the driver diskette supplied with the device and update Windows without success.

  I am running Windows 7 family professional X 86 on a HP machine with a 2.9 GHz quad core processor, 8 GB of Ram and a card NVidea extra and a hard drive to start solids.  Without other additions have been made.

  Well, I bought a new adapter thinking it has stopped working.  When I installed the new card, it does the same thing.  It turns out that, Zone Alarm Free is blocking all access to wireless adapters.  There is no way to turn it off.  So I uninstalled Zone Alarm, and it worked.

• Problem network with new 8500 all-in-one print

  I installed a new Officejet pro 8500 has more on my network.  I have 3 computers on the network set up this way: DSL modum connected to Linksys router, all 3 computers connected to the router, PRINTER is connected to the COMPUTER main and other 2 computers print via the main computer.

  I installed the printer sucessfully and run the HP Network Assistant after the connection via another computer dialog boxes.  I can print and fax very well from the main computer, but not on other computers.  I set up the printer as a 'shared' on the main computer and other computers recognize the printer and set it as default printer.  But when I try to print form other computers, nothing happens.  When I go into the properties of the control panel - printers - ports on the main computer, the printer is listed as USB002 but when I click on "Set up" I get "an error occurred during port configuration.  This operation is not supported.

  Main computer is running Windows Vista with current updates

  Other computers running Windows XP SP2 with updates.

  Any ideas?

  Thanks, Jim

  Problem solved: some how the "printer offline" option was checked.  Once I unchecked everything works.  I can't for the life of understand me how this has verified in the first place.

• Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Error number: 0x800CCC0F

  I can't send Emails of Outlook Express recently.  I deleted norton antivirus which has accelerated, but no shipping.  Even disable the firewall is not good.  POP3 is set up correctly in Outlook Express and I can receive Emails.  A message of support said disable the limitation on the bandwidth Exchange Server and I find no selection of Internet Information Services (IIS) Manager under administrative tools, so I'm at an impasse on this one.  Does anyone have a solution to this common problem?

  I added the word Express in the 2nd sentence.

  In my view, that the port settings have changed for MSN. However, it is a question of MSN and you will need to ask in the forum MSN here. I have no expertise in any program 'Live '.

  Windows Live Solution Center
  http://windowslivehelp.com/

• problem network win xp and win 7

  How to connect 2 computers on the LAN (with cable) if one network running Windows XP Professional and the other is running windows 7 Ultimate?

  Please, answer by steps.

  Thank you

  Please see sharing files and printers with different versions of Windows and networking of computers that run versions of Windows Boulder computer Maven
  Most Microsoft Valuable Professional

• Problem Network Printer B209a-M

  I had to get a new wireless modem because my old one stopped working.  I don't know how to upgrade the printer with the new wireless information.  None of these options on the printer does nothing when I press them (network options). I have a printer B209-a.

  Photosmart plus B209, must use the printer software to connect the printer to a new network.  Prior to using the information in the document following the link I would erase the current information for the network printer.

  * Menu of the printer Configuration > network Menu > restore default network values

  To connect to this printer to new access point must be a USB cable. *******

  (1) download the drivers for this printer by clicking here.

  (2) run the downloaded file to start the installation of the software, if not yet downloaded.

  (3) If you do not have the software installed, then the package will immediately lead to a connected printer

  (4) select that you want to connect wireless and software will ask for a USB cable to be plugged

  (5) once the printing software linked to the printer via the USB cable, then the software will offer the ability to automatically send the information stored in the computer wireless or to enter the information manually.

  For more information about this installation method, click here.  I hope this helps.