Problems of GPS in several simulators

Similar Questions

• Problem of GPS location after updating to IOS 10

  Anyone have problems with GPS location problem after update from IOS10?

  I drove Baltimore DC Regan airport, I tried with apple and Google map yesterday map, location was far from the highway, he could not determine where we are, we were on the road, but he kept us showing that we were on a local road to the highway.  Could not find 90% of time on my road.  Finally, I have to use my phone to brother with IOS9, we were fortunate that it has not updated to the most recent IOS 10.

  I wonder if anyone has the same problem after the update.

  Hello yinchiu85,

  I understand that your iPhone seems to have a hard time determining its location precisely. Fortunately, there are a number of steps you can take to help improve the accuracy of the information.
  

  Improve the accuracy of GPS

  GPS accuracy depends on the number of visible GPS satellites. Location of all visible satellites can take several minutes, with accuracy gradually increasing over time. To improve the accuracy of the GPS:

  • Make sure that you set the date, time and timezone correctly on the device in settings > general > Date & time. If possible, use the value automatically.
  • Keep a clear vision in several directions. Walls, vehicle roofs, buildings of great height, mountains and other obstacles can block the line of sight to GPS satellites. In this case, your device uses Wi - Fi or cellular networks to determine your position until the GPS satellites are still visible.

  If your iPhone is still unable to pinpoint your position, the next step would be to restore location Services.
  

  If you want to reset all settings to factory default location, go to settings > general > reset and tap reset card and privacy. When your location and privacy settings are reset, apps will be stop using your location until you grant them permission.

  On privacy and location in iOS Services 8 and later versions
  https://support.Apple.com/en-us/HT203033

• Configure several simulators in Eclipse

  Hello

  Does anyone know is it possible to have several simulators in eclipse and

  How to set up that?

  Thanks guys,.

  Praveen Singh

  Yes it is possible.

  first install all the simulators that you want and open the same workspace through all the version of Blackberry Eclipse plug-ins you have such as 5.0, 6.0 and 7.0.

  Now, check, you will get all simulators in your eclipse you have installed.

• Re: Problem connecting GPS AT100

  I have a Tablet AT100-100, that I just bought. I seem to have trouble connecting with GPS. I have activated the GPS according to the instructions of the manual, but still cannot connect with GPS. I tried to connect on google maps and was able to connect via wifi, but when I turn off wifi, I can not connect via GPS only. Is that what I can do to activate GPS or is it a hardware problem

  Hi toshibakias,
  personally, I own an AT200, then I am not a perfect fit for your question.

  I wonder if you confuse the GPRS (General Packet Radio Service) with GPS (Global Positioning System) here. GPRS can be used (pretty much as WiFi) on some devices to get a connection for data transfer. GPRS is not a feature of the AT100 (or AT200) but many phones.

  But if you mean a "fix" of GPS with the term "connection", then hopefully that operate you with the following steps.

  #1
  I recommend that you install the App "GPS status" for greater transparency. In this application, you can see if GPS is basically permitted and one count how many satellites is currently on view (+ reception quality). In addition, you can trigger a download of AGPS data (if a wireless Internet connection is at your fingertips) that can speed up the first fix.

  #2
  Go outside.
  GPS (for the most part) only works under a clear sky. Avoid the secondary buildings which can protect the reception of the GPS Satellites. The number of satellites for the application "GPS status" should increase now.

  #3
  Be patient.
  Get the position (= fix) may take several minutes. Especially if the GPS receiver is used for the first time or if the situation has changed considerably since the last use, a first fix may take up to 20-30 minutes. Generally, it should take about 5 minutes if GPS reception is good and maintain you an almost constant position.

  If you have the GPS 'fix' once, future GPS corrections could be faster. Also GPS position power (!) be still available at the entrance of a building (near windows, at least).

• problems of gps and wifi iPhone 6 9.2

  My iphone 6 does not connect to the wifi unless it is less than 5 feet from the router and the GPS can't find my spot.  This has happened since Apple updated the software around the release of the 6s.

  None of the versions subsequent correction of the problem, nor has any troubleshooting discussed in online forums, proposed by technicians apple or carried out by technicians from apple to the store.

  My phone is a few months after its warranty (how convenient for apple) and they would not replace it without paying me $ 280 to do.

  I am a few months since my full upgrade with Verizon, but the lack of GPS and wifi not connecting not caused much frustration and data usage, which was costing money because it does not connect to wifi when the fact of other devices in my apartment.

  This is one of the worst customer experiences I've had with apple.  I'm on the edge of Verizon plan, which allows me to update when I want if I don't care keep my phone or get money to trade it.  I'm two months from own the phone outright, but I will probably go to a Samsung better buy a promotion gift card $ 150 to go to Samsung and trade in my iPhone.  I'm an advocate of Apple for a long time, but clearly widespread lack of solution to this problem is not a good look for a company that built themselves on the convenience and simplicity.

  After two months of headaches, I feel like it's worth to wait until March and I should not have to this fact.

  You have a question or you did he yell?

• openDatabase problem with O.S. 6 simulators

  I use the following code

  var Dataset = function() {}
  This.Database = null;
  this.currentData = null;
  this.onTransact = null;
  this.onDataLoaded = null;
  try {}
  Alert ('a')
  If (window.openDatabase! = "undefined") {}
  Alert ('b');
  try {}
  This.Database = window.openDatabase ('trinisceneapp', ' 1.0', 'gallery', 50 * 1024, function () {alert ('ok open') ;}); ")
  Alert ('cc');
  () This.Database.transaction
  function (c) {alert('c');
  c.executeSql ("CREATE TABLE IF NOT EXISTS cache (key unique int, unique uri text, json text)", [], function () {alert ('ok create') ;});})
  }, function() {alert ('ok tx')}; function() {alert ('fail tx') ;})} ;
  Alert ('SD')
  } catch (e) {}
  Alert ('fail');
  }

  } else {alert ('fail b') ;}}
  } catch (e) {}
  Alert ('failed to open the database');
  }
  };

  a simulator of O.S. 6 9780.

  the performance of a var d = new Dataset(); the code does not work after alert ('b');

  IF I run this code on a simulator of O.S. 5 8520 code will run successfully

  What is the problem with 6 O.S. and openDatabase... I thought it was a HTML5 / feature OS 6?

  Car simulator! device = real. It is not specific to the RIM is: no mobile simulators are not enough for the final testing. They are just not quite representative of the actual device. They are narrow, often very close, but I guarantee that you will always find new bugs not known on a simulator, and the Simulator will not always behave as a real device. It's just the nature of the simulation.

  It is easier said than done, but you really need to test on devices real as much as possible before the production.

• Problems with GPS signal/slot

  Hello

  I try to get GPS information for my application. I did a class to do so.

  #ifndef GPSHANDLER_H_
  #define GPSHANDLER_H_
  
  #include 
  
  #include 
  
  #include 
  #include 
  #include 
  
  using namespace QtMobilitySubset;
  
  class GPShandler : public QObject{
      Q_OBJECT
  public:
      GPShandler(QObject* parent);
      virtual ~GPShandler();
  private Q_SLOTS:
      void positionUpdatedSlot(const QGeoPositionInfo &geoInfo);
  
  public:
      void start();
  
      void stop();
  
      double Latitude();
  
      double Longitude();
  
  private:
      double mGeoInfoLat;
      double mGeoInfoLong;
      QGeoPositionInfoSource *mGeo;
  };
  #endif /* GPSHANDLER_H_ */
  

  #include "GPShandler.h"
  
  GPShandler::GPShandler(QObject* parent)
  : QObject(parent) {
      mGeoInfoLat = 0;
      mGeoInfoLong = 0;
      mGeo = QGeoPositionInfoSource::createDefaultSource(this);
      if (mGeo) {
          bool checkval = connect(mGeo, SIGNAL(positionUpdated(const QGeoPositionInfo &)), this,
                  SLOT(positionUpdatedSlot(const QGeoPositionInfo &)));
  
          mGeo->setPreferredPositioningMethods(QGeoPositionInfoSource::SatellitePositioningMethods);
          mGeo->setUpdateInterval(1000);
  
          //checkval = mGeo->setProperty("backgroundMode", true);
          //int i = 3;
      }
  }
  
  GPShandler::~GPShandler() {
      // TODO Auto-generated destructor stub
  }
  
  void GPShandler::positionUpdatedSlot(const QGeoPositionInfo &geoInfo) {
      // Here's where you can do something with the device's position
      mGeoInfoLat = geoInfo.coordinate().latitude();
      mGeoInfoLong = geoInfo.coordinate().longitude();
  }
  
  void GPShandler::start()
  {
      mGeo->startUpdates();
  }
  
  void GPShandler::stop()
  {
      mGeo->stopUpdates();
  }
  
  double GPShandler::Latitude()
  {
      return mGeoInfoLat;
  }
  
  double GPShandler::Longitude()
  {
      return mGeoInfoLong;
  }
  

  As you can see I have connected the signal postionUpdate() of QGeo class that I use for the positionUpdatedSlot() of the slot. I use the class as follows:

  Pop = new GPShandler (this);

  void::startTimer() {} App

  Pop-> start();

  }
  void::stopTimer() {} App

  Pop-> stop();

  }

  which are called when a key is pressed. However, the positionUpdatedSlot() of slot function is never called. I have debugged in my code and cannot find the problem. I can confirm the work of connection (function returns true), and that presented startup and shutdown functions are called as expected. Is there a reason why my slot machine function is not called?

  Note: I have another implementation of signal/slot in this app:

  Connect (mTimer, SIGNAL (timeout ()), this, SLOT (update ()));

  and it works very well.

  Thank you

  Gerry

  I do not know which of the following has solved my problem, but in any case, it's working now after doing these things:

  1. give permission to app to device identification information. (I had already given GPS, but examples also being device identifying information I thought I'd try that)

  2. remove the line:

         mGeo>setPreferredPositioningMethods(QGeoPositionInfoSource::SatellitePositioningMethods);
  

  as an example, I created using this example: http://blackberry.github.com/Cascades-Samples/geo-locationdiagnostics.html did not have this line

• Problem with GPS in very remote locations...

  Hello

  I recently went to some remote areas of Western Australia. My phone is an old 4S running 9.3.5

  In these remote areas, I had either no reception iphone mobile, or the receipt of another carrier (to what I had) so all the

  I could get is SOS capacity in these areas.

  The GPS of the iphone did not work (location services). I got iphone apps preloaded for the trip, but because the GPS does not work I could not use them. It is, has it been fixed for iphones later, or do you need always mobile reception to get the GPS to work?

  Dissapointingly, I had to go back to my old windows phone where the GPS worked. The apps I had already downloaded for the iphone

  and windows phone had full maps already downloaded (as they were the map apps) for the region, in that I was.

  Thanks in advance. Stephen

  What app?

  This may be a limitation of the application in question against the GPS hardware in the phone.

• Problem when running of several blocks of entire function

  Hello

  I'm building a great system/function using LabVIEW. Therefore, to practice and make look it tidy, I create a VI of blocks to separate and combine certain functions. But, my problem is when I did, the simulation seems to work really slow and the results are different compared to when I had the whole function/system in a single block.

  For your information, every VI blocks that I created has a loop control and simulation. When I have all interconnected, I put them all in another loop control and simulation, because some functions that I use to connect them together could not be used without the loop.

  Wondering if having a loop control and simulation in every block contributes effectively to this problems as each loop will run depends on the number of time that I put in the loop.

  If it doesn't matter which method to avoid this problem happen? My system/function looks terribly messy and it will be difficult for me to present no later than at the end of my project.

  Thank you.

  Hello

  I think what you are trying to achieve is to use simulation subsystem functionality. This allows the functions to execute outside a loop of simulation so that you can create a Subvi. After selecting the functions in your simulation loop you would like to be in a Subvi, select Edit» create Simulation subsystem. Let me know if that helps!

  Also, here is some information for this: http://zone.ni.com/reference/en-XX/help/371894E-01/lvsimhowto/sim_h_subsyssa/

  -Zach

• Problems of GPS navigation after the 23.4.A.1.200

  After updating my Z3 Compact to the 23.4.A.1.200 firmware version, when I lorsque j' utilise uses a navigation app my position (the point) is displayed correctly but my direction (arrow) appears in the opposite direction. Navigate is not convinient, because if I'm heading North my devide believes I'm soing South and, therefore, gives me the wrong orders. First it something I can do about it, or I have to wait for a new update that solves the problems caused by this one?

  I checked with Google Maps maps & HERE and that they work as expected. You could try to calibrate your compass sensor. Just search any application of Compass on Google play. There are a number of those that are free.

  Another way to do is spend in Service Mode:

  Enter * #* #7378423 #* #* in the dialler.
  Select "Service test".
  Select "compass."
  Follow the instructions on the screen to calibrate the compass.

  It will be useful.

• Problems of keyboard with several character keys do not work at startup.

  When I boot my laptop characters (', 1, tab, caps lock, and a) Don't work. I use the function of accessibility to type without keyboard. I could get the keyboard to work properly by uninstalling the keyboard from the Device Manager, but after a boot sequence the problem recurs.

  It is likely that your keyboard is a failure.  You will probably need competent technical assistance to do this in a laptop.  It usually requires some dismantling of the computer to remove and install a new keyboard.  In some, it is very simple and could be done by a non-techie, with great care.

  It can be difficult to find a GOOD keyboard for a laptop.  There are a myriad of pieces for the same model computer.  My advice would be to find first and so that the system for tech support.

  Note setting a keyboard in a desktop computer is something from $ 10 to $ 20 is simply disconnect the faulty one and plugging in the new.

  The keyboard in a laptop is a kind of coverage on the PC.  It is very easy for dust, crumbs and fluids to go and really mess up things.  This is why they are so vulnerable.

• Problem in the http connection. (simulators 5.0 os blackberry 9000 smartphone)

  Hello friends,

  I am doing my project in Eclipse Platform Version: 3.4.1 4.5 os and I'm using the 8300 Simulator. I use the http connection. When I debug my project, I work correctly. I'm download 8300 same Simulator to test the object. It worked correctly in Simulator 8300.

  but when I try 4.7 and 5.0 for Simulator that I download this Simulator my project does not work correctly the problem of http connection. Someone tell where I'm wrong?

  Thank you

  Ajay.

  also to install BlackBerry JDE 5.0.

• Having a problem with access to several sites. PLEASE HELP QUICKLY!

  OK so I still really still did nothing with my laptop, but I tried to enter in google, download Itunes and I can not even access the E-system, all my sites search engine don't "work" ive been all day, ive tried already check if Windows 7 is the blocking of sites, my internet itself to have this problem but I can't seem to find out what's wrong , ive used IE9 and Chrome, but the two do not work even if I charge it appears always like it or at least someone to look how to do everything and send me the link...

  

  Try to run a full system scan with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• Problem on GPS on Blackberry Curve 8520 blackBerry Smartphones

  (Sorry before... My English not good... ) I use curve before 8520_ a long time ago, I was using facebook place in my bb... After that I wipe my bb... after that I have cannot use facebook place... and none given GPS Source also. When I arrived I didn't get response from bb 'SUPPORT GPS. Your device does not support the location service. To use facebook place, a device with integrated location service is required. "this is the answer. then I download Google mp... and bb maps... still does not work... I am open Option > Advanced Option > GPS > but none of data source for GPS... nothing elese... and off location... what I have to do. Help me

  Hello

  Welcome to the community

  I understand your frustration but the GPS function is not supported by Blackberry Curve 8520, this feature is on most Blackberry 3 G devices. You can consider getting a device that supports the functions such as new phones OS7 except 9220 Curve and 9320. Please see the link below on the specifications of your phone.

  BlackBerry Curve 8520 - full phone Specifications

  Ron

• Problems of graphics across several Adobe products on multiple machines

  Has anyone else in the last few weeks have experienced a deterioration in the quality of graphics and display in (only) Adobe products on windows computers?  This includes various powerful Nvidia graphics card with CUDA acceleration on portable computers so that accelerated desktop computers with dedicated Nvidia graphics cards?  Deactivation of gfx acceleration has an advantage in this glitches and bizarre behavior gfx stops but slows down all the machines.  Disabling the gpu acceleration is an unacceptable solution.  Looks like the acceleration/CUDA etc. ADOBE app failed with the most recent update of Nvidia for me?

  ADOBE have never been honest or prompt to own up to the ownership of their mistakes so I do expect a massive amount of obfuscation of stooge ADOBE and other distractions before the technical staff of the merit and value contribute to this topic.  All PCs and laptops are i7 intels and all use Nvidia and Adobe CC and suites CS6.  Lightroom also both version 6 and CC.

  Sounds serious to me?

  Applications to break with any sort of error message like stop working or is not responding... etc.

  There was recent changes in systems, such as updates to the OS.  You can check in Control Panel > program and features > view installed updates option.

  Check the KB which has been installed recently, updates when you are facing problems with the CC apps.

  Re-distributable redistributable Visual C++ version 2015 is installed on the machines?

  Download Visual C++ Redistributable for Visual Studio 2015 of the official Microsoft Download Center

  If you get a crash report like for example, After Effects has stopped working, we need to check with the newspaper the observer of events.