Problems printing HP psc 1315xi all in one

Similar Questions

• Printer HP PSC 1400 all-in-one still affects offline

  Printer HP PSC 1400 all-in-one gets always in offline mode after a print job is cancelled or caused an error. I'll need to ALWAYS restart my computer each time this happens because this is the ONLY way for the printer to connect again. The solution Center HP says that it is online and ready for printing. I can still scan documents.

  

  But the problem is that whenever I try to print a document to MS Word 2013, he says that the printer is offline.

  I tried printing from another program such as Notepad, it always says offline. Even the print manager says its offline.

  

  I read another post that a doctor scan or something can solve this problem, but the link is no longer available. Can I ask help of you all here? Thank you.

  Moreover, my OS is Windows 8.1.

  Hi there @eriksala , Welcome to the forums

  I saw your post on your printer PSC 1400 series showing you that it is offline and will not print on your system Windows 8.1. I have a suggestion that might help you get through this problem. The tool, as you also mentioned, the print and scan doctor is one of the steps for troubleshooting as well!

  I hope that allows you to get back to you online and print again.

  "The printer is offline" Message appears on the computer and the printer will not print: Windows 8

  Please let me know the results.

  Have a wonderful day!

• How do you re - align a printer HP PSC 1400 all-in-one is not printing?

  Could someone show me please how to realign a printer HP PSC 1400 all-in-one not print after paper jam could only be released, with difficulty, from the front of the tray of the printer. Thank you.

  Hello

  You can do a hard reset with the printer. Be sure and remove the ink cartridge before unplugging the power cord. This will ensure that the cartridges to realign itself when they are inserted in the after that the printer invites you to do so.

  Hard Reset:

  Unplug the power cord from the printer and the wall

  Take out the toner cartridges.

  Wait for 30 seconds

  Plug the power cord into the printer and the wall (be sure that the printer is plugged into the wall and not a surge protector)

  Replace the toners/cartridges in the printer

  Let me know the results

• Printer HP PSC 2355 all-in-one cut at the bottom of all the letters and numbers.

  I have a HP PSC 2355 all-in-one printer and use Windows 7 Home Premium 64-bit.

  When you print documents, the bottom of the letters and numbers do not print.

  Hello techphobic

  I'm glad that you have solved your printing problem. If the problem recurs, do not hesitate to post back.

  As a possible explanation, looks like you had a faulty cartridge or the low ink level. Part of solving the problems of print quality is to try another cartridge that you already have and it resolved the problem. A cartridge bad or low ink level can cause horizontal stripes in images either because it doesn't have enough ink or it has problems, releasing the ink. If the lower part of the page is cut off, then it looks like the cartridge's ink.

  I mentioned the notebook because it is a very basic application that you can print from. Sometimes printing problems are specific to a particular application and printing from Notepad allows you to isolate the problem. As a dedicated article for printing from the Internet problems, I wanted to narrow the problem to the right Internet printing.
  Problems printing from the Internet

• Is it possible to set up in windows 7 for my printer HP psc 1315 all in one...?

  .. .or is not possible, and it is best to think about to buy a new printer!

  I was wasting far too much time trying to set up many "good drivers" for this device and will never work ok

  My question is simple: "there is a device that works well with HP psc 1315 all-in-one Windows seven?

  Thanks in advance ;-)

  Peter

  IF this is your printer/scanner - http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=374568#N223 then there are drivers W7 32 and 64 bit available for this purpose.

  Everything on the PC concerned with your HP printer uninstall, restart the PC, then download and use the appropriate driver (W7 - 32 or 64 bit depending upon need) and see what happens then.

  Whatever it is, as its apparently supported, you're probably better asking HP if you did not already.

• PSC 1315xi All in one print in color instead of black on windows 7 and 8

  In our House, we have three computers: two laptops, one running windows 7 and one running windows 8 and one desktop running windows xp.

  On our office it prints fine, but on two laptops when trying to print black text Print instead in a grayish blue color. I am trying to print in color works on all computers. Or ink cartridges are empty.

  As he works on the desktop, I guess it's a driver issue, but I can't find a solution.

  Hello

  What ink cartridges you actually have in the right slot of the printer, a black cartridge 56/27 or a 58 Photo ink cartridge?

  The supplied sample occurs even if you have a Photo cartridge in the printer...

  With the help of a cartridge Photo is not intended for printing the text in black, but for printing Photos and will not have a gray color effect...

• software and star driver hp psc 1315xi all-in-One extracts full but will not load on xp sp3

  Can not find a way to get this to install. After extracting I finally found it in running %Temp%. Searching through all files and folders, trying to find the exe file. to get it to autorun, but was unsuccessful. I tried to install this on 2 different PC with xp pro sp3 but no luck.

  The solution below is from michael323 here in the Forums of HP's Support.  Make sure that you send Bravo!

  I think I have solved this problem.

  I have a PC Windows XP Pro (SP3) who has been affected by this problem.

  Immediately after that the window of 'extraction' went to 100% and closed, nothing happened.  The windows install/never display software.

  Whenever I tried it creates a log file that started with this:

  "Parsed command line: «.\Setup.exe".

  Using datfile: C:\DOCUME~1\xxxxx\LOCALS~1\Temp\7zS1293\autorun.inf

  # GetValueByLang (f-> c_str(), _T (Version), _T (LanguagesInthisCD) failed "

  System LangID = 1033.  mapped to ENU

  # The system language is ENU, but is not on our CD!

  There was other error messages after that, but they all come from lines 3 and 5.

  Something she prevented the installation program to recognize the language ENU files ARE present in this download.

  Comparing two PCs, a problem, and one that works perfectly, I saw that one who was not was AutoRun disabled through a registry setting.  I temporarily deleted this registry on the PC that wasn't and Setup launched and ran like he was supposed to.  Here are the first of this log from the same PC, a few minutes later, where the only difference was that I had removed the registry setting criminalized:

  "Parsed command line: «.\Setup.exe".

  Using datfile: C:\DOCUME~1\xxxxx\LOCALS~1\Temp\7zS1293\autorun.inf

  System LangID = 1033.  mapped to ENU

  We use the system of language = FRA, which is located on our CD!

  As you can see, the message "(LanguagesInthisCD) failed" (line 3) disappeared, and the line 5 (now line 4) shows that it has to recognize that the language ENU installation files are present.

  So if you encounter this problem, and you are comfortable with the system registry, here is how I got it to work on my PC:

  Start regedit
  Navigate to the bottom of this tree
  -HKEY_LOCAL_MACHINE
  -SOFTWARE
  -Microsoft
  -Windows NT
  -CurrentVersion
  -IniFileMapping
  Below, find out if there is a key named "Autorun.inf".
  On my PC (the one with this problem) the value of this key has been "@SYS: nexistepas".
  If your registry database also has this, it may be the cause of your problem.
  In the left pane of regedit, do a right click on Autorun.inf and select "Rename" from the context menu.
  Change the name to something like "Autorun.inf.hold".
  Close regedit
  At this point, I restarted my PC, but I don't know if it is really necessary.
  I ran the downloaded driver file.  It extracted, and the Installer started out as it was supposed to.

  When it was done, I returned in regedit and renamed "Autorun.inf.hold" to "Autorun.inf".

  It is extremely frustrating for me, and (if you need it), I hope that this solution works for you.

• Remove and check cartridges appears on the screen of the printer HP PSC 2110 all in one

  printer does not print, I'm ink? Can't wait to buy cartridge if I don't have a need. Thanks for the help AL

  Hi AL SEGAR,.

  ·         What version of the operating system is installed on the computer?

  ·         Have you made changes on the computer before this problem?

  Follow the steps in the article.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Contact the manufacturer and get tested or replaced ink cartridge.

• Problem printing HP Officejet 5610 all in one printer

  Your Question: lately I got a printing problem documents and the printer 5610 has quite wierdly. Sometimes I see my printer name as the default name at other times that I can't find. When I try to add, I get a message Windows can't open add printer. Local printer spooler service is not running. Restart the spooler or the machine. Sometimes I run a malware software and restart the computer, the printer is connected automatically but sometimes I can't find the printer. Strangely, when it's not printing yet I can scan documents to the printer on my computer. Help, please.

  Sorry you are still having this problem. I see that you have an error in the spooler. This usually converts with a problem of Windows itself.

  Here is a video that can help you with the problem.

  http://www.YouTube.com/watch?v=MgHpoNZgbvQ

  Let me know if it helps.

• HP PSC 1410 all in one printer scanner does not work

  My printer, HP PSC 1410 all-in-one works fine as a printer, a scanner and a copier until I had a virus and had to reformat.  I have the original HP for the printer drive, downloaded the software undated and have loaded, deleted and reloaded the software 20 times.  The printer and copier works well.  Microsoft appears saying that scanner drivers are not certified, etc. and I can't scan to work.  I had put in hundreds of hours trying to get this to work.  I am 71 years old and I already have the computer work for my company 18 years ago.  My inability to solve this problem that bothers me more than anything else.  I need some young soul to help me that whip.  I don't buy a new computer or upgrade to Windows 7 until I fix this.  It has become a challenge, but I need help.  Kenny:

  Hi KennethPlaisance,
   
  Method 1: HP has created an update to update the driver to scan and fix the problem. Check if it helps you to fix the problem.
  For more information, see:
  The digitized files disappear after scanning with HP Solution Center
   
  Method 2: Use the diagnostic utility scan to fix the problem automatically.
  Visit this link to download the utility:
  "Scanning device could not be initialized" and related scanning errors display in Windows XP, Windows Vista and Mac OS X

• HP psc 2110: a pulse mode, nothing works well in this mode for my psc 2110 all-in-one.

  Get this second puosating soundevery, and the printer is frozen.  In the past I have reset in unplugignthe power and then hoding the arrow buttons cancel and right and the pluging in the power sometimes it works.

  Hello @johnny1936,

  Welcome to the Forums of HP Support!

  I understand that the printer HP PSC 2110 all-in-one is frozen and making a frequent pulsing noise. I would like to help you to solve this problem today. Currently, there is probably a problem with your product, power or a Firmware programming problem occurring within your printer. Can I please you follow the steps below to isolate this problem and fix it.

  Step 1: Check of power:

  Please connect your all-in-one PSC directly into the wall outlet for power. Power strips and surge protectors can cause your printer for lack of power and will not work properly. Once your printer is plugged directly into the wall outlet test your printer to see if the problem is resolved. If the problem persists, proceed to the next step.

  Step 2: Power Reset:

  1. With your printe r WE, please unplug the power cable from the back of your printer
  2. The power cord unplugged for 1 minute
  3. After 1 minute the back power cable plug in
  4. Your printer should start up on its own

  Once the printer lights please test your product in order to confirm that the problem has been resolved. If the problem persists, your product may experience a failure of Firmware. The Firmware is the internal "brain" of your printer. It determines what your printer is and how your printer it. If the firmware is corrupted in your printer, it may cause performance problems. Normally, I would have you update the Firmware on your printer. If the problem persists after the update is complete, will allow us to complete a programming reset the printer. However, due to the age of your printer there is no Firmware updates or resets the programming. Therefore, a replacement product may be necessary if this problem persists.

  Please reply to this message with the result of your troubleshooting. If the problem persists, please let me know if you see all the solid or flashing lights or message board on your printers. I look forward to hear from you!

• base software for hp psc 1350 all-in-one

  I bought this printer (hp psc 1350 all-in-one) second hand. My Mac Mini (OSXv10.9.4) downloaded automatically the driver.

  What site can I download the software Basic (and advanced) for this printer?

  JoachimChristianReuter

  Hi @JoachimChristia

  I can help you with your 1350 PSC and your Mac running 10.9.3.

  There is no full feature software and driver of HP, but the pilot of Mavericks v10.9 OS X for your printer is available through Apple Software Update (ASU).

  With this driver, you can still print and scan, you'll just have to scan from HP software. Scan to the computer from the printer control panel is available only when you use the HP scanning software, so it won't work because there is no scanning software HP as part of the Apple Software Update driver.

  Instead, you can scan using,

  • Method: scan from the print window & scanning

• Problem with my HP PSC 1610 all in one printer of the series which is printing pages in the right order.

  Basically I have the HP PSC 1610 all in one printer. I know not what has happened, but in some way, when I go to print a document of site Web etc, use the printer to print the last page first and keep printing until the 1st real page printed would be changed, which would print on top printed pages.

  My problem is now, it's actually print the path opposite, now it prints the 1st page of first and last last page, which means when I pick up all the printed pages, I then have to sort the page numbers in the correct order.

  Now, I use my printer waste dumps, I print a lot of game documents such as guides etc.. Now if I was just printing pages 1-5, I'd be fine with it, but at this current moment, I was printing guides with more than 50 pages, which really saddens me to have to keep sorting out pages of paper for good order.

  I must say that it does print no pages in a random order, which means like printing, for example, 10 pages, it does not print the page number 6, 2, 5, 8, 3, 10, 1. It is actually printing the pages in the following way, page 1, 2, 3, 4, 5, 6, 7, 8, 9, 10. (When it's over, page 10 is one who is on top of the stack), but I really need to put it so that it will print the pages in the following order, p. 10, 9, 8, 7, 6, 5, 4, 3, 2, 1. (So at the end of printing, the pages of issue 1 is actually on top of the battery), which will allow me to simply staple the pages without the need of haviing re - sort the order of the pages in the correct format.

  I have all my print programs installed as Director of HP and others, so I can change main settings of printers, but I looked through all the preferences main page tabs and I don't find the option to change the printing order of pages.

  I really need help to set my printer settings to print order in the way I need to, but I don't know where the actual parameters are to change this option, and I tried to do an actual search on Google, but I use too many words, search results do not end up giving me instructions that I need He is always giving me other things, more like excavations at random on everything related to my printer and I can't be bothered, working all day to get the good looking, lol. Can someone give me please the instructions I need to set the print order, I need it to be.

  Thanks in advance for all who are able to provide me with assistance.

  Thank you

  Alison Black.

  LIVE FAST, FIGHT HARD CLOSE.
  HUSTLE, LOYALTY, RESPECT

  John Cena (WWE Wrestling Heavyweight Champion)

  Hey

  HP have the customer.

  has attempted to call them abt the question because I'm clearly useless with this technology * beep *.

  but fisgured this is a setting of the printer.

  so if you have the HP SOLUTIONS CENTER's new installed.

  down the down theres a SETTINGS tab click on it.

  go to the PRINTER SETTINGS, once you have clicked on a new dialog box appears.

  the first tab (by following my printer settings ive got a HP PSC 1311) must be ADVANCED

  Click on that, the last option should be OPTIONS AVAILABLE and bloody, WHICH PAGE ORDER WE WERE looking for THAT PERSON DO CAN TELL US ABOUT.

• I have a problem with the HP psc 2210 all in one printer.

  My printer is an hp psc 2210 all-in-one

  All main buttons are flashing and the message on my reading of the printer (Remove and check cartridge) t - it means to clean?

  Hello

  Equip your number of printer model to this site of HP drivers and support for this information and follow the troubleshooting steps for it.

  http://WWW8.HP.com/us/en/support-drivers.html

  Or ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  See you soon.

• PSC 2210 all-in-one: PSC 2210 all-in-one with Windows 10: ok printer but the scanner does not work

  
  

  Hey @Manu37520,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the scanning of your PSC 2210 all-in-one printer to your PC for Windows 10. The printer has no drivers for Windows 10. You will need to use a computer with an operating system prior to analyze.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.