problems with password I have cloud

Similar Questions

• Problems with wifi, I have a wifi extension in my house and I can not connect

  Original title: Wifiproblems

  Problems with wifi, I have a wifi extension in my house and I can't connect it, I try with support but it did not work. It's a shame in a new tablet to have this problem

  It only happens with the tablet surface, not with other devices

  It's an easy way to solve

  I saw a similar situation in forum wireless, they have solved the 'limited' problem by disabling the Extender, and then turning turn it back on. He solved their problem, and it is easy to try. I hope it works for you.

• Problems with the screen resolution, Cloud based software and Photoshop after the last round of updates Windows 8.1.

  Original title: screen resolution problems.

  Since the last series of Windows 8.1 update the resolution of my monitors has been changed for the worse. I use an AOC 2367 M (resolution 1920 x 1080) as my first monitor and a 42 inch Sony Bravia (resolution 1920 x 1080) as my 2nd monitor. The changes are more noticeable on the Sony Bravia and any adjustment I make to the resolution only make worse it.

  I also have problems with some software clouds as I load using citrix and when I try and navigate once opened software, I can't because the pointer selects a point about 50 mm on the side of the where he is hovering. In fact it is very difficult to open and close as anything and I resorted to the laptop to get concrete results.

  Photoshop now also comes up with a message when I open it up to inform me that the monitor profile seems to be defective.

  Any suggestions would be helpful as I thought initially an another upgrade must follow to correct the ills of windows 8, but appears not to have happened.

  Hi Joseph,.

  Thanks for the reply.

  Method 1:

  I suggest you to download and install all Windows updates available including optional updates. You can also install the latest device drivers for all devices including display drivers and monitor drivers on the manufacturer's Web site.

  http://eSupport.Sony.com/Perl/select-System.pl

  http://www.aocmonitorap.com/root/ANZ/download_driver.php

  Method 2:
  Adobe Photoshop CC version 14 is compatible with Windows 8.1. See Windows Compatibility Center for more information. To solve the problem with Photoshop CC, I suggest you try the procedure described in the article and see if it helps.

  Cloud applications help creative /CC crash immediately after launch
  http://helpx.Adobe.com/Photoshop/KB/CC-applications-crash-immediately-launch.html

  If the problem persists, I suggest you to contact the Support from Adobe.

  http://helpx.Adobe.com/contact.html

  To solve the problem from software hosted accounts, you may need to contact the Support to count.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Everything has been done to solve the problem with the FileVault have to be disabled in order to get the lights on the keyboard turns on at startup on the macbook pro?

  Everything has been done so far to solve the problem associated with the FileVault have to be disabled in order to get the keyboard lights turn on at startup on the macbook pro?

  I use FileVault. The keyboard on my MacBook Pro lights work perfectly. I'm under El Capitan 10.11.3.

• Problem with password reset link - "there is a temporary problem with the service. Please try again. If you continue to receive this message, try again later. »

  Hello, account Windows Live from my wife was hacked a week ago and has been used to send many spam emails. As a result, his account has been disabled or closed (we are not sure). Whenever she asks to reset a password and a link sent to a different e-mail account, when she clicked it gets this message 'there is a temporary problem with the service. Please try again. If you continue to receive this message, try again later. "She is tried repeatedly, but get the same message. Someone knows how to go beyond that, so she can recover her account? Thank you.

  Hello BBB34,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• Problems with creative photography of Cloud payment plan confirmation

  Hello, I plan photographer creative photography of Cloud (a year, paid in advance). I did the prepayment on 16 June 2016 for the period ending June 16, 2017. But every time I open Lightroom or Photoshop, I receive the informational message that "there is a problem with the payment creative photography of cloud... Please verify your payment in your account management... If a problem is not solved up to the period of time creative photography of cloud will stop working. "I checked and see that the payment transaction has been processed successfully, I see the invoice number, transaction number, etc.. I don't understand what should I do to avoid problems with the close days of work in Lightroom or Photoshop.

  Looking forward to your comments.  Lightroom FAQ Photoshop Lightroom

  Contact Adobe Live Chat

• Problem with password protected content Migration

  I just did a migration (11 hours after a lot of questions and problems - "transfer" is BS) I had to finally buy an external hard drive so that it can work because it failed several times with a network and a connection cable - regardless, I did it and now the new PC requires a password for the old account to access the protected file which includes Outlook and VERY important e-mail I have this.  Problem is it is a PC at home and had no password but who do not accept the new pc.  Can someone tell me what I'm missing here?

  Thanks in advance for any help

  Hi RHowe,

  • Do you have a password for the new account?
  • What version of easy transfer did you use to copy the content from the old computer?

  You try to transfer data from the migration file to the new account by following this link.

  Transfer of files with Windows Easy Transfer in Vista

  Note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there.

  In addition, you can also move the Outlook.pst file to your new computer under Documents for easy backup. Open Outloook, choose Open > Outlook data file and follow the directions.
  Note: Do not IMPORT because it can damage your .pst files.

  Reference:transfer files and settings from another computer

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with paying for creative cloud

  Hello, I get a message that my card cannot be used to pay for creative cloud membership.
  I have not changed anything, and the card is valid until December this year.
  I changed the computer to a new one.
  On my account, I see that 525 reserved SEK

  
  

  What is the problem?

  
  

  LG
  

  Lars salvation,

  You will need to contact support by calling/chat for this query.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• Strange problem with password created on my Satellite L20

  I bought a Toshiba Satellite L20 laptop with model No. PSL2XL-01R007
  I registered the password using the Toshiba help utility that has been placed on the desktop, using the secure user function.

  After stop of the laptop and turned on, it prompted me to enter the password before it can start. When I entered the password which I thought I had entered windows using the Toshiba help utility under secure user, it gives me a message of invalid password whenever I try to enter the password. So I can't use my laptop. The BIOS is the Phoenix.

  Thanks for your advice and assistance

  Hi Hung

  I tested it today with my Satellite L20-182 and everything works fine. I tested the options for the user and supervisor passwords, and there is no problem at all.

  Sorry, but I think that you enter the wrong word as password and this is the reason why you cannot start the laptop. I really put t see any other explanation.

• connection printer MG7520 problems with password, and the new name of the router

  I had to change my router network name and the password (the actual router is the same, but the network name and password is different). Now my Canon MG7520 won't 'talk' to my lap top, room rvia wired or wireless LAN (that worked before). My guess is that I need to "tell" the printer name and the password are different, but I know dn't how.  I tried to download the software and run it (that is to say, all over again) but when I do I get an "unable to acquire information on the driver and software.

  Any suggestions?

  Hi sdwhite,

  Yo are quite right that any time changes to network configuration, the printer must be given new items.  The printer can be connected directly from the operations Panel, and I have included full instructions HERE.

  It has not responded to your question or problem? Please call or write to us at one of the methods on the page contact us for further assistance.

  This has answered your question? Please click on the button accept as Solution so that others may find the answer as well.

• CCTK V2.2.1 problem with password Admin actions

  Nice day.

  I am trying to configure a build custom offline process and I implemented a WinPE image with a few controls and remote files ini FILE to configure the BIOS settings for the technicians in offline mode.  I hit a deer where CCTK put my Admin password, but it does not recognize the password now.

  Here is the result of my batch file:

  X:\Windows\System32>CCTK.exe--setuppwd is Abc! 23

  Password is configured successfully.

  X:\Windows\System32>CCTK--setuppwd = - valsetuppwd = Abc! 23

  The supplied password is incorrect. Please try again.

  X:\Windows\System32>CCTK--setuppwd = - valsetuppwd = Abc! 23

  The supplied password is incorrect. Please try again.

  X:\Windows\System32>CCTK--setuppwd = - valsetuppwd = Abc! 23

  The supplied password is incorrect. Please try again.

  Anyone have any ideas?  I have a call with Dell to get these unlocked Admin passwords.

  Has anyone experienced this and worked around it?

  Hi VANGUARDHYDRA,

  The password that you used here is to have a more symbol "=" in the first command. so the bios password you set is "= Abc! 23"and not" Abc. " 23 ".

  Then please use this command below to clear your password.

  CCTK - setuppwd = - valsetuppwd == Abc! 23

  A valid command to set the password is: cctk.exe - setuppwd = Abc! 23

• DRAC 4 - problem with password reset

  Hello

  My company bought used/refurbished Dell R200 server with DRAC 4/p card. Now, I'm trying configure/reset password for DRAC 4 (v1.75 A01 fw) to the server. Server running Win 2008 x 64 std.

  As a first step, that the seller forgot to put with ribbon cable card, so I had to do it myself after I got it... Back to story :) at the start, I have configured DRAC (Ctrl + D; set IP DNS & - I do not see 'reset password' option), I also configured BMC to tunnel IP too (I think that's not important).

  Then, after I got windows running nicely (WU, net. FW + soft base; I did while waiting for flat cable). Once I got the cable, I have configured the DRAC at boot time, and then I went to interface http and received the error of connection (for root and calvin). In the meantime, I had to grasp because victory could not find drivers for dell DRAC: (.)

  So I installed OMSA ManagedNode x 64 (v7.4.0.2) tools RDCA (Setup did not find my card too...). Now the server startup time tripled :/ (don't know what did OMSA / or make at startup...), but nice after starting web server interface OMSA works, I can see the status of the HDD, the sensors, the tensions - almost what I need, but nothing on the DRAC (BMC only).

  Started administrator cmd and typed:

  C:\Windows\System32>racadm racresetcfg
  ERROR: Cannot perform the requested operation

  And:
  C:\Windows\System32>racadm getsysinfo
  ERROR: Cannot perform the requested operation

  So now, I think that something is not ok, but what? DRAC is broken (said kindly) or soft cannot talk to the card...

  Can anyone provide some tips?

  Hello

  I did an extra test (before leaving the workstation) and OMSA CentOS Live image downloaded and tried running the racadm - same result then the card should be broken.

  Seller has decided to replace the card because "a very likely card is broken." So now I wait for the new card.

  If I remember, I'll post summary :)

  -Summary-

  I got more than 2 cards of seller. None of them worked, firmware update found card, updated at the latest but racadm wouldn't work: (.)

  I'm packing cards back to give their feedback to the seller, but I decided to check once more... If I put each a card server and I tried the OMSA Live CentOS run racadm getsysinfo [/ i].
  I don't know if I would be really happy but one of the DRACs replied :), so without hesitation, I run "racadm racresetcfg" and I had no errors (happy), so I waited a moment for card to reset, and then rerun the getsysinfo but there not as before, but now I can log in the web and I changed my password.

  I suspect editing card, but the PREV raid card works very well, there could be something offshore with this putting on drac PCI slot. Seller also admitted that he had specially the elevators in order to install the drac4 card.

  I consider this as solved :)

  PS. Sorry for my bad English.

• Help, problem with password

  My husband forgot the password of computer brand new my son.  Operating system is Windows Vista Home Edition.  Computer won't past the login screen.  What I can do.  We do not have the computer disk, he lost those too!  Help please!

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with list of app @ Cloud Creative app (Mac)

  Hello

  After any new Creative Cloud App installation and successful connection to my adobe account in a single application, I see on the folder Apps apps to install.

  Instead, I see the only mistake of downloading and please contact us by. Below there is only a blue button with Creative cloud download.

  I tried several times to uninstall creative cloud and install app again (even with CC cleaning app), using CleanMyMac app to clean up garbage in the system, cleaning of host etc. file and the problem still exists.

  Is there a solution for this problem? I would be very happy if someone can help me

  I use the latest version of OS X El Capitan, 10.11.4

  

  Please try to remove reinstall Adobe Application Manager using the cleaning tool and creative cloud help usage of the Adobe Creative Cloud cleaning tool to solve installation problems then, cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

  I hope this helps.

• Problem with files on creative cloud

  When I connect to Creative.adobe.com/files, I can see the buttons on the top to find, download, organize and Recycle Bin, files and folders, but I don't see any file or folder.

  • If I try to download a file, it tells me the download is in progress, but nothing happens.

  • If I try to create a folder with a name, he said the record already exists (and no, I'm sure I already do not have a folder with this name since I've never been able to create any folder)

  Yes, I did:

  • Empty my memory cache

  • Try different browsers

  • Try to different computers

  • Spend hours looking online for a similar problem

  If anyone can help me or you have a similar problem, it would be great (no, great!) to hear from you.

  Thank you and good day,

  Ben

  Benedict please email me your Adobe ID to [email protected]. We'll get the problem solved.