Problems with the entry of the mouse to change the alpha

Similar Questions

• Satellite A660 - 07P problem with the pointer of the mouse using the touchpad

  I just bought my A660 07P last Thursday, September 15, 10 and I noticed that I had problems with the mouse pointer using the touchpad.

  From time to time, the cursor/pointer is locked and seems something like a button up and down.
  I assume it's because it's on a mode of waiting, but in this case as every 5 minutes.
  When it is locked, it will also change the zoom percentage when the touchpad is struck. It is very not when I'm in the middle of something and I can not move the pointer. In addition, the start is very slow.

  BTW, I have not installed any programs or applications. I'm still testing until Friday, otherwise I'll go back to where I bought it.

  Hi mate

  This isn't touchpad problem.
  I guess as support for computer laptop MULTI-TOUCH PAD
  There are a few additional features supported by touchpad, and I think that you have enabled this while using the touchpad

  The touchpad supports the features:
  _ChiralMotion_
  You can scroll vertically and horizontally

  _Pinch Zoom_
  This feature provides functionality like the scroll wheel zooming

  _Rotating (chiral spin) _
  This provides gestures to rotate the photos and other objects

  _Momentum_
  This feature provides a smooth, fast trackball as the movement of the mouse. A quick finger on the touchpad surface can move the sliders in the entire screen.

• I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse.

  Original title: right click on the mouse itself activating

  I borrowed a USB to a person at work and I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse. The left click of two devices works normally, however, sometimes she does not respond to clicks and it takes a few seconds to work. The left button was constantly starts to turn on, as if he was stuck. After that I hit Alt + Tab and modify windows it stops for a few moments and starts at a later date. I havo not found a specific condition or a combination of keys that may trigger the fault.

  I read a few posts on discussion forums, but all say that it could be a hardware problem, which I think is not, because both devices have the same problem and I'm sure it all started with the insertion of the borrowed memory stick. I scanned the readers to help Symantec's EndPoint Protection and installed Microsoft Security Essentials and performed a full scan, but found nothing. I even restored the system, but the problem remains.

  Should I get a different antivirus? How can I find the cause so I can find a better targeted solution?

  Try to install the drivers from this link and check.

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167

• Problems with the mouse scrolling

  I have a Microsoft Wireless Mobile Mouse 1000 that I use on my laptop Dell Inspiron N5110 with Windows 7 Ultimate 64 - bit installed on it.

  Recently, the mouse wheel is crazy I've put it down it scrolls to the top, scroll down, done both or nothing. and this only happens when scrolling down, there is no problem of scrolling upward.

  I changed the USB port - in which I put the receiver - the only one directly attached to the motherboard. That gave me minutes of scrolling perfect without problem, but after having tried other ports he went crazy again.

  I tried to uninstall the driver from Device Manager and then put it back, but to no avail (I did for several ports)

  I should note that the problem itself is fluctuating, which sometimes means that the wheel is crazier than others and I tried the mouse on another laptop and the problem does not occur.

  Thanks in advance.

  Original title: Wireless Mouse 1000 - wheel had crazy

  Hello

  You did changes to the computer before this problem?

  I wish that you read the following article and follow the suggestions in the article.

  The problems with the mouse button or scroll the parameters
  http://support.Microsoft.com/kb/303091/en-us
   
  Hope this helps, if the problem persists with Windows updates, please get back to us. We are here to help you.

• Problem with the drive of entry

  Hello

  I have a problem with the connections of socket on blackberry.

  I send a command to my server and it will answer me with something like

  WORM R1; ACT: 0; CLV: 1.0.0; PRO: 1.0.1; UID: carlsum@ociss

  SC = (SocketConnection)
  Connector.Open ("socket://fes.ngv-group.com:5080; deviceside = true");
  sc.setSocketOption (SocketConnection.KEEPALIVE, 5);
  is = sc.openInputStream ();
  OS = sc.openOutputStream ();
  OS. Write (Protocol.doVersion (UID). GetBytes());
  OS. Write (Protocol.doLogin (UID). GetBytes());
  int bytesAvailable = is.available ();<----returns a="" value="" of="">
  Char input [] = new char [bytesAvailable];
  for (int i = 0; i)< bytesavailable;="" ++i="" )="">
  input [i] = (char) is.read ();
  };

  However my contribution [i] array only contains v.

  Why is - this is.available line () returns 0?

  How to read in the range full of WORM R1; ACT: 0; CLV: 1.0.0; PRO: 1.0.1; UID: carlsum@ociss in my input array

  I agree that treatment work should you find.  I suspect that you have a coding bug.  Take a look at the folloing code.  The result was what I expected:

  test
  t
  e
  s
  t

  Byte [] testBytes = new byte [] {(byte) 0 x 74, (byte) 0 x 65, (byte) 0 73, (byte) 0 x 74 x};
  String testString = new String (testBytes);
  System.out.println (testString);
  Char [] testChars = testString.toCharArray ();
  for (int i = 0; i)< testchars.length;="" i++="" )="">
  System.out.println (testChars [i]);
  }

• Satellite Pro L20-someone ' one can tell me if I have a problem with the screen?

  Hello

  I have a Pro L20 - PSL25E and I recently had problems with the screen, it was intermittently flickering/lose color and whiting almost (when the color fades white vertical lines begin to appear).
  This seemed to worsen after that I dropped it (only from about 2 feet off the ground, not a big drop).

  I thought that the sceen can go, but the performance of the laptop seems to be affected when this happens, the laptop started to run very slow (tracks mouse slowly, programs I clicked take ages to run and it freezes sometimes to stop flashing) that had me thinking that it might be a virus or performance problem.

  My screen, drivers are updated, I did a full scan with McAfee, ran a clear-up system and a Defrag.

  I was wondering if anyone knew if it seemed to be a problem with the connections of the screen and would need replacement or if it could be repaired or if it were a performance problem?

  Any help would be great thank you appreciate!
  Rebecca.

  Looks like the graphics chip has a problem, which I think is a motherboard replacement.

  You can get a quote for repair to an authorized service provider. There is a list of ASP on the Toshiba site.

• Re: Satellite C650 - problem with the devices connected to USB ports

  Hello

  Can help someone, I have a C650 and everytime I try to connect to something to him via the USB ports, it is not "found" by the computer?

  The other night, I tried to get pictures on my phone but it wasn'; work and I put it down to a problem with the phone, but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.

  The laptop makes a beep sound as it would on an extraction device when you plug... I hope that makes sense. So I am now assuming that the problem is with my computer, is there something I can do to fix this?
  Thanks in advance

  Sorry should add - it's like nothing is plugged at all when it is, and it happens on two USB ports, not just one...

  Post edited by: leahhw123

  Hello

  What happens with plug n play like USB mouse device?
  You are able to use an external USB mouse correctly?

  > but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.
  I guess this could be a problem with the software or drivers installed.

  I searched a bit and his city that he has a software is compatible with windows vista/2000/xp. Win 7 is not mentioned do not know if this could be a problem, but in your case, I recommend asking the support of this software product for some advice.

  In addition, you can try to install this software once more, check whether this USB problem appears again.

• I have problems with the mail (El Capitan)

  I have problems with the mail

  See writing an effective communities of Apple support question.

  Without knowing what are these problems there is no way we can really help you.

  Try this:

  Start the computer in Safe Mode, and then restart normally. It will be slower than a normal startup.

  MacIntel: Reset of the controller (SMC) system management

  Reset the PRAM and NVRAM on your Mac.

  Repair the hard drive and permissions - El Capitan

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Now, download and reinstall OS X El Capitan 10.11.3 Combo Update.

• Problem with the bluetooth on my mac

  Hello everyone,

  I am a french and I have a problem with the bluetooth on my mac. My Magic Mouse has been suddenly disconnected from my mac. So I decided to reconnect my mouse. But this time, I couldn't do that because my mac (I think) did not detect the mouse. I said 'I think' because I am trying to connect this mouse on my son's mac and mac knew the mouse: it's only a problem of my mac.

  I went on the 'system preferences' to see if my mac know my mouse again, but no. While my mouse is light and bluetooth enabled. I tried with another mouse and it's the same result.

  So, what can I do?

  Thanks for your help,

  Merry Christmas!

  Roland Matt

  See "your device is not recognized by your Mac" here:

  If your Apple wireless mouse, keyboard or trackpad doesn't work as expected - Apple Support

• HP 15 laptop: problem with the touchpad and the key "stuck."

  Hello!
   
  Last weekend, I have an irritating problem with my HP 15 laptop. Bought two years ago and upgrades to Windows 10 a year ago.
   
  First of all, my touchpad started to not work properly. It "freezes" and I can't use it until I click the ESC key, but it doesn't last and "freezes" again a few seconds later. Then, everytime I open a window where there is a text box (Start menu, edge browser, Control Panel, etc.), the number 5 is entered automatically and permanently, as if the button 5 has been blocked. I did a quick check and button 5 do not seem physically stuck.
   
  Yesterday, I restored the system to the factory settings, so I'm back to 8.1 for Windows and then upgraded to Windows 10. Everything seems to work fine, but this morning, the problem was back. Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.
   
  Thank you in advance for your help!

  Welcome to the HP support community @gouch3.

  I understand that you have a problem with the keyboard and the touchpad on your laptop from HP 15.

  Have you tried to use a keyboard external and mouse at all?

  Have you tried to go to Safe Mode to see if the problems persist in there?

  Have you tried to perform a material or forced reset Reset?

  Did you do a test of material?

  Have you updated your drivers?

  gouch3 wrote:

  ... Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.

  It could be a driver problem to be able to look at that for you, I need your model number. I wish I could give you an answer or not, but at this point without the troubleshooting results and the model number, it is difficult for me to say.

  I can say that if everything works in point 8.1 of Windows without problem, the driver TROUBLESHOOTING is a great place to start. Please try to follow these steps for the keyboard and the touchpad of troubleshooting:

  • Beginning
  • Search for Device Manager
  • Search results, open Device Manager.
  • Click on display
  • Show hidden devices.
  • Click the arrow next to keyboards.
  • Right click on the name of the keyboard device.
  • Select uninstall.
  • Continue deleting the names of devices in the category keyboards until the feature of all the names have been uninstalled.
  • Restart the laptop twice.

  Touchpad:

  • Type of research, "Device Manager."
  • Click on Device Manager,
  • Expand mice and other pointing devices.
  • Right click on the TouchPad,
  • Click on uninstall.
  • Restart the computer laptop twice,
  • Reinstall the TouchPad card.

  I found a document of troubleshooting for you to try also called Portable keyboard troubleshooting. Please be sure to follow the steps described in this document.

  The best document I have for TouchPad problems is the use and troubleshooting of the TouchPad and ClickPad document. 

  Here is a link to the HP Support Assistant, if you need it. Just download and run the application and it will help with the software and drivers that need to put up-to-date.

  This is a great question other clients may also be questioned. When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you want to show appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems. Could you please also provide your model number (How can I find my model number or product number?)

  Thank you!

• How to solve a serious problem with the Battary of my T500 laptop?

  Hi Forum,

  My laptop is Lenovo THINKPAD T500 2055, and its main features are the following:

  -T 39, 6651 SBB 9 CELL LI-ION BATTERY
  -Processor Intel Core 2 Duo T9400 (2.53 GHz, 1066 MHz, 6MBL2)
  -8 GB DDR3 SDRAM Memory Module 4 GB (2 x 4 GB) 1066 MHz DDR31066/PC38500 DDR3 SDRAM SoDIMM Kingston.
  -HDD 2 GB Intel Turbo Memory cache.
  -ATI Mobility Radeon 3650 with 256 MB.
  -160 GB of HDD, 7200 RPM.
  -Windows 7 complete edition with the latest Service Pack (x 64).

  My problem with precision and brevity is the Battary. I was using my laptop with the same battary since 01.01.2009 (almost 3.5 years), and the battary works quite OK.

  Most of the time, that my laptop is plugged and work with electricity. However, A very short time, I used the laptop while it is running on battery power, however, I used to empty the weeks of the dough from time to time, i.e. all 3, I unplug the charger and continue to use the laptop until I see the orange warning sign (5%), then, I connect again.

  Fortunately, I never had problems with the battary or the cell phone, and when I charge the laptop usually it shows sign full (100%).

  Suddenly three days ago my laptop starts to blink and the orange sign battary constantly in charge shows 100%. When I try to run on the battery by disconnecting the AC adapter, the laptop immediately loses its power and stops immediately.

  What do you do? Could you please give me useful tips to solve this problem?

  I'd be greatly and sincerely appreciate all of your entries!

  Thank you for your consideration of my request and I look forward to hearing from you soon!

  Replace the battery!

• I'm having a problem with the update of the last security update. What can I do?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: problem getting my pc to download the latest security update

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Floyd,

  It helps those answering questions if you provide:

  What version of windows (32-bit or 64-bit) and service pack level.

  you use what browser (exact version).

  What application or antivirus security suite is installed and your current subscription?

  What third-party firewall

  What anti-malware software can be installed.

  What updates you trying to install?
  What error do you get everything when trying to install updates?

  In addition to the information required:

  How to view the log of update windows

  Click Start, and then click Run.

  in the Open box, type%windir%\windowsupdate.log

  and then click ok.

  Scroll down to the last entries find the error codes associated with the last attempt to download/install.

  start at the bottom and work your way up a section that indicates an ERROR, WARNING or FATAL.

  If the appropriate copy and paste the codes of errors in this thread if someone may be able to help you.

  on the other hand, you can find the error code and other suggestions by searching the forum.

  Also check the windows file called Ko folder * .log (* = number of update KB896688 ie) and send the contents of the update has failed.

  This may even provide clues as to why the update failed.

  How to read the windowsupdate.log file:

  http://support.Microsoft.com/?kbid=902093>

• Problems with the IP settings on XP pc wireless network

  I have (part time) a wireless network to recently set up. Router is connected to a pc windows 7, and there is a XP machine with a USB adapter as well. The PCs are turned on, and the XP shows a wireless connection with a 'very good' signal. When I try to start IE on XP it will fail to connect. When I then run the diagnostic network connection died at around the point where the diagnosis is trying to reactivate the adapter. The diagnosis of output reports "error renew IP address: semaphore timeout has expired" and "default gateway 0.0.0.0." If I then run ipconfig/all there is absolutely NO output. This happened yesterday, so I manually reset following IP 299357 instructions and the same thing happened again. I did the reset again and rebooted the XP. The router indicates that it has recognized the XP and ipconfig/all on XP shows things different, including

  IP 192.168.2.6. subnet mask 255.255.255.0; gateway by default, dns server, and dhcp like 192.168.2.3 Server (the IP address of the router); DHCP and automatic configuration enabled. IP routing and WINS proxy are disabled.

  While I was typing the above router lost sight the XP box, although the box XP still reports a 'very good' signal and a connection permanent.

  So far, I had this network in place for 10 days, but could not use the connection to the outside of the PC XP on a day, which followed my re - configure the router to its IP address 192.168.2.3 rather than recommended in setting up such 192.168.2.1, because 192.168.2.3 was that the XP box trying to connect as. Two PCs have been turned off during the night and worked fine when started the next morning for the entire day. The next day that XP had a connection for long enough to reach the site where I was looking for updated printer drivers, and then he lost when I started to download the and nothing since. IP information now suggests that I might have little joy for a while, if I still have to reset the IP address of the router to 192.168.2.6 this time, but I don't see why I should continue to do.

  Some of the other TCP performer? Troubleshooting IP connectivity:

  Ping 127.0.0.1 return OK; ping 192.168.2.3 expires; ping 192.168.2.6 is OK; ping host name does not work (assuming that the host name is just the name of the computer to the pc win 7); Pathping 192.168.2.6 works. (If that this watch is actually the host name and then ping that name does not work either, there is no entry in the ARP cache, do not know the valid IP addresses to test those.)

  Suggests that I have problems with the default gateway, and name resolution, but I do not know how to set resolution, unless you change the IP address of the router, which can do the first, but not the second.

  Suggestions welcome.

  The fact that things worked fine for a day seems to indicate that the material is OK, and I checked that I have the latest firmware for the router and USB adapter. Security of the router is disabled, as is the firewall on the XP, neither of which is ideal

  Technical support of Belikin has decided that the adapter was flakey too and should be replaced. If we call things the customer support, and I heard of them since, did not except a s message that seemed to ask whether or not I had entered with them...

  So what network?

  Packed wireless router and got some kit devolo for a network of current carrier online (on the grid) put in place instead. More expensive, Yes, but IT WORKS! 6 weeks later, still no problem to access Internet from a PC.

• Trying to solve a problem with the list under display properties screensaver!

  When I try to put my screensaver, gout dwon displays a completely blank entry followed by (None) & the list of available screensavers.  Every time I choose (none), it is up to the last installed screen saver.

  An example: the last installed screen saver was ArcSoft Photobook screensaver.
  So, when I select (none) for no screensaver, it is up to the ArcSoft Photobook screensaver.

  This happens each & everytime I have add a new screen saver.
  (None) option always returns to the last screen saver installed.

  There are moments that I need the option screensaver set to (none).

  Any ideas on how to fix this problem would be greatly appreciated.

  Ed

  Not sure as to what I did, however, my problem with the screen saver has been fixed.

  I've been messing around with a number of things that I thought might have caused this problem.  And wala, suddenly the problem existed no more!

• Pavilion 15-e070sl: problem with the key "cancelled."

  Hi guys,.

  I have some problems with the key "cancelled." It does not work for a few months. But the more serious problem is that sometimes when I double click on a file or a folder with my mouse compares the window cancellation asking me to confirm moving the file to the trash. This window disappears until I have restart the system. He thus annoyng. It seems that the key 'cancelled' suddenly to work again when I double click on something.

  I hope you find a solution

  With the availability!

  Hi @MichaelMazz ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion Notebook 15-e070sl and the keys does not properly.  Select an on-screen keyboard layout using this document , as this could be the problem.

  If this is not enough, try this document on troubleshooting the keyboard. You can watch the laptop marked key stuck section.

  Here is a link to uninstall the keyboard. Restart the computer after the uninstall, it must be reinstalled automatically.

  Have you tried to clean the key or use air to blow the key there could be debris in the key itself?

  I hope this helps.

  Thank you.

• "A problem with the display driver.

  Recently, I get an error message whenever I open Photoshop CS4. It reads as follows.

  "As Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  "GPU improvements can be enabled in the Performance preferences panel."

  I checked the graphics cards in Device Manager, and when I tried to update the software, it told me that I was aware.

  • OS: Vista Edition Home Premium
  • Dell Inspiron 1520
  • Display driver: NVIDIA GeForce 8400 M GS

  Sincerely, Danny

  Hello

  Try to update your display manually driver and do not use the analysis of the drivers on the manufacturer's website either.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.