Protection against malwares always turned off when you turn on the computer.

Similar Questions

• Error 'the procedure entry point xmlTextReaderConstName' not found in the dynamic link library libxml2.dll when you connect to the computer

  Original title:

  I get this pop-up when I connect: 'the procedure entry point not found xmlTextReaderConstName in the dynamic link library libxml2.dll.'  What should I do to fix this?

  Hello

  1. are you able to connect next to this error?

  2. are you aware of any changes made to the computer, before the show?

  Method 1:

  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you have finished the clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Method 2:

  Run a SFC system analysis and control for the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  Follow these steps.

  a. open windows Explorer, navigate to the following location:

  For 64-bit.

  C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

  For 32 bit,

  C:\Program Files \Common Files\Apple\Apple Application Support

  b. copy the file "libxml2.dll.

  c. open new windows Explorer, navigate to the following location:

  For 64-bit.

  C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support

  For 32 bit,

  C:\Program Files \Common Files\Apple\Mobile Device Support

  d. Paste the file 'libxml2.dll' at the location.

  e. restart your computer.

  I hope this helps.

• nits and chkdsk performance runs when you power on the computer

  My computer runs chkdsk most of the time I turn on my computer.  Performance is very slow and often I see the words, "not responding" when using Explorer and Outlook.  I have defraged and cleaned my disk several times without success.  I have my antivirus Norton Security Suite program.  Help!

  Hi mickeymantle007,

  • Did you the latest changes on the computer?

  Read the articles and check if it helps.

  CHKDSK runs each time that you start your computer

  http://support.Microsoft.com/kb/316506

  Chkdsk.exe or Autochk.exe starts when you try to shut down or restart your computer

  http://support.Microsoft.com/kb/831426

  See the article and try the steps mentioned to improve the performance of the computer.

  How to make a computer faster: 6 ways to speed up your PC

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

   

  It is possible that some third-party programs installed on the computer is at the origin of the performance problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Error 'nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll is not found"when you connect to the computer.

  Original title:

  Problem: I use DeLL Desktop.When I connect, these messages appear on my screen: nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll not found. Re-installing the application may fix the problem. Pls help. Thank you.

  Hello
  1. what version of Windows is installed on the computer?
  2. are you aware of any changes made to the computer, before the show?
  Assuming you have Windows Vista or Windows 7, follow the steps mentioned below.

  Method 1:
  

  Step 1: Perform a boot minimum troubleshooting and check which application reports this error
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Step 2: reinstall the application.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 2:
  Run an analysis of auditor of system files on your computer and check for the issue.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Pop Up window which appears when you connect to the computer

  I made an update of windows Monday, 7-6 and now get the following message when I connect to my computer.  When you try to close the popups they keep reappearing. Any idea on what it's for or how to fix?

  The feature you are trying to use is on a network unavailable resource. Click OK to try again or enter a different path to the folder containing the installation package "status.msi" in the box below. ""  Another box pops up saying please wait while windows configures the status. Then another box appears saying that cannot find an installation package for the product. Try the installation again using a valid copy of the installation package "status.msi".

  SOLUTION: Download this file:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-69585-1&LC=en&DLC=en&cc=us&lang=en&OS=2100&product=391182

  Extract the .exe

  go to this folder:
  slp_dd_hathi_110_017\setup\status\

  tap the status.msi. Steve

• A blue screen when you work with the computer and not during inactivity TOP: 0x0000007A (0xFFFFFFFFC000000E, 0x000000004D393884, 0xFFFFF6FB40000108, 0xFFFFF68000021000)

  Hi, computer my mom sometimes stops during work or simple browsing the internet on youtube, Skype, etc.

  The error string is:

  STOP: 0X0000007A (0XFFFFFFFFC000000E, 0X000000004D393884, 0XFFFFF6FB40000108, 0XFFFFF68000021000)

  Physical memory dump FAILED with status 0xC0000010

  Not really sure what to do

  I went in cmd, CHKDSK came and it was planned for the next boot. However, he has taken that a few seconds for the start and has not really accomplish something. I'm used to a 3-5 minute long CHKDSK process.

  Any help is appreciated.

  Kind regards

   We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  
  

  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask

  
  

  If you use the blue screen view, which has crashed, or a similar application, don't.  They are wrong at least as often they are correct

• krst Checkpoint error - when my computer starts, that it starts to power, but then turns off when it is at the Dell logo screen

  When starting my computer it starts to turns on then shuts off when it gets to the Dell logo screen.

  How can I fix?

  Hello

  Try the methods in the links below and check if it helps.
  Windows XP restarts unexpectedly or restarts when you shut down the computer
  http://support.Microsoft.com/kb/320299
  
  Windows XP restarts when you try to shut down your computer
  http://support.Microsoft.com/kb/311806
  Windows XP stops and automatic restart problems
  http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/russel_02may13.mspx
  
  I hope this helps.

• Turn off the text field (always submits page when you press enter)

  I have an area which allows you to enter search criteria. There are two fields and a button. The 1st field is a selection list that gives a list of columns in a database that can be searched on. The 2nd field is where the user enters the value to search for. The user can submit the search in 2 ways. They can press the button or press return when the cursor is in the 2nd item that is a text field (always submits page when you press enter). The results are then displayed in a region of report below.
  
  The problem I have, is that if the request is for > 10 seconds and the user gets impatient and hits the Enter key or the button search again the query is returned for a second time (or third or fourth according to the impatience of the user) causing the claim on the basis of data with a negative impact on the performance of the system.
  
  I know how to handle the search key. On a click event on I turn off the button so that the user cannot click on it again and resubmit the request.
  
  My question is - how can I turn off "always provides a page when you press enter" text item when the user presses enter? I tried an onclick event, but disabled the front element I could type in anything. Onblur event does not seem to do anything.
  
  Any ideas would be very appreciated.
  
  Andy

  Hello

  First of all, one thing to try: attributes of the Page, there is a section for the presentation in double - try setting this option on no.

  Otherwise, using the text field type, adds the following to the INPUT tag:

  onkeypress="return submitEnter(this,event)"
  

  which means, you can call your own function of javascript on the onkeypress event, the final line would be call submitEnter(). But you can set the value of a hidden page element:

  function doEnter(t, e)
  {
   if ($x('P1_SEARCH_RUNNING').value == 0)
   {
    $x('P1_SEARCH_RUNNING').value = 1;
    return submitEnter(t, e);
   }
   else
   {
    return false;
   }
  }
  

  Then, after changing your element to an element of normal text on the attributes of HTML form elements, add in:

  onkeypress="return doEnter(this,event)"
  

  Andy

• HP Officejet 4630: Printing on both sides, no option to turn off when you print a Word Doc; When printing Pages

  Recently, when printing, the printer appear uses both sides of the paper, even when we don't want him. There is no option to turn it off when you print a Word document.

  
  When printing Pages it shows a checked box that says BOTH SIDES, if I uncheck, then it works.

  

  But from Word, there is no other choice. I tried the file/Preferences, I tried through the printer settings and nothing we can find will solve this problem? This has recently (last week or two) become a problem...

  Thank you!

  Hello @LaylaWi,

  Welcome to the Forums of HP Support!

  I would like to help you to solve the problem of double-sided printing that you experience when you try to print single-sided computer Mac OS X 10.9 to your HP Officejet 4630 e-all-in-one printer today. Please follow the steps below to disable duplex printing.

  1. Open a Word document
  2. Select file , and then click print
  3. Click on the drop down menu to the Copies and Pages and modify this provision
  4. Uncheck duplex .
  5. To change the additional print settings click on view details.

  -Source

  Ultimately, judging by the useful screenshots that you included in your post, you are in the right place to disable two-sided. You just need to click on the Copies & Pages for the appropriate options.

  Please reply to this message with the result of your troubleshooting. Good luck!

• should I turn the printer off when you are not using it?

  you just buy new printer - HP envy 5530 - need to know if I need put it off when you are not using it or if it passes in mode "sleep"?  other printers I had went to sleep mode however cannot locate this answer in the FAQ - like entry - thanks ~ ) husband

  Welcome to the mgchandler forums,

  I saw your post on want to know if you should be powered down the printer or if it won't fall in the mode 'sleep'. My best advice would be to turn off the printer by the power button if it will not be used for a period of time, for example during the night. Regards the mode "standby", the printer goes into standby after 5, 10 or 15 minutes of inactivity.

  • To change the settings for sleep mode, go to the front screen of the printer and press settings (wrench)
  • Contact preferences
  • Press the arrow down and on Standby Mode when you see
  • You can now change the time of mode 5 to 10 to 15 minutes before

  User - Guide Page 93 + 94 for Info Sleep Mode

  I hope I helped answer your question!

  Have a great Tuesday

• Why Windows Firewall always stops when I turn on the computer - even if she did before? How can I keep it on recommended setting when I shut down the computer?

  I always change the tuning parameters recommended on Windows Firewall, when I turn on the computer, otherwise it reads in red writing "Windows Firewall does not protect your computer." The network location is the Public network.

  Hello
  If you are having problems turning on Windows Firewall, follow the instructions on this page: http://support.microsoft.com/mats/windows_firewall_diagnostic/
  Here are the instructions for error messages: error 0 x 80070424 or error of 0x8007042c
  I hope this helps you.
  Brian

• Wireless connection is off when you look purely at Youtube

  Hi everyone, as the title suggests, my internet connection is off when you try to view a video of youtube, I formatted my laptop 10 days ago, I installed W7 Home Premium 32 bit Service Pack 1 as I have original, since the installation, I have disabled Windows Update and I don't have install of unique software until the problem occurred.

  At first, I was able to Watch youtube videos, I watched 2 or 3 episodes of the laboratory of human, then the next day, whenever I opened my youtube, my connection drops, by saying that my connection is a connection not identified without access to the internet, he arrived in 7 of 8 times since I watch 2 or 3 episodes the day before , just once, I could watch a video without the connection down after that.
  What I've tried is open command prompt and typed: "ipconfig/release" and then "ipconfig / renew", unsuccessfully, with the exception of one once where it worked, if I remember correctly, just the first time I tried this worked, so, it does not. So what I have to do is to restart my computer to get my connection back internet.
  My wireless don't even shows me that it has a connection, unidentified, until I have use command prompt and type "ipconfig/release", if I do not, then my connection shows I still have internet and after typing "ipconfig / renew" it still shows after I have an internet connection, but when I try to open a Web page no charge; saying the browser, waiting for a response from the Web page, and it arrives with Chrome, Firefox and IE. And I doubt that it is the modem as there is another computer that can run youtube without loosing the Wi - Fi connection in the House.
  The model is a Toshiba Satellite L455D-S5976 laptop with processor Athlon X 2 Dual-Core QL-64
  I hope that I am clear, as I don't know what to do to stop this from happening.
  Thanks in advance!

  SUCCESS! the problem was solved!

  The problem from the beginning has been a problem with my antivirus AVG and youtube, the problem has been the accelerator of AVG, I had to turn it off to make the problem disappear, now I can watch YouTube peacefully

  IF someone comes to this same problem, with avg antivirus, follow these steps:

  Open the menu of the avg program

  go to Options
  so to advance settings
  Then expand "Web browsing Protection.
  Then click shield online
  Then simply uncheck the option 'Enable AVG Accelerator'
  And the problem should be solved!

  Thank you for your help COLIENNE V!

  Welcome!

• If I'm only using Quickweb/Instant Web (never from Windows), do I need protection against malwares?

  I refer to the snapshot on software called "Quickweb" or "Instant Web" which comes with a few HP Minis and can be downloaded by other users of HP.

  When you turn on the computer, Quickweb loads instantly and allows access to Internet, e-mail, etc., but not software applications or computer players (I think).

  To enter in the Windows operating system, you must click on a separate button and wait for Windows to load.

  Assuming I ever do that and use only the Quickweb, I need malware protection for my computer? Also, do I need to keep Windows updated?

  Thank you.

  Yes, my understanding quickweb runs in a sandbox.

  If you ever plan to use Windows, so you don't have to do something for her.

  The safest way absolute to run an operating system is a boot CD/DVD, in this way, nothing can ever write the OS to permanently infect it. every time that you start from the disc is perfectly clean every time. There are many available just for this purpose small linux distributions.

  Sanboxing is safe but malware writers are still trying to overcome the sandboxing on different platforms, it's a cat and mouse game. But since Quickweb is not widely used as Windows, malware authors can ignore trying to defeat.

  In the end, nothing is 100% safe.

• I liquidated my bar. As the search bar when you type in the web address, and now I can get it back. I handed to the clicked place where I did to trun off (unchecked it), and I don't see anything again?

  I liquidated my bar. As the search bar when you type in the web address, and now I can get it back. I handed to the clicked place where I did to trun off (unchecked it), and I don't see anything again?

  Hold down the key (key in OSX) and press the following letters in this exact order: V T M
  The bar of menus must now appear permanently, unless you turn it off again (view > toolbars). Turn on/off the menu bar is a new feature in version 3.6.

  See the other bars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).

  Then, in the Menu bar, go to view-> toolbars-> customize, then press the Restore Default Set .

• How I bounce back without having to change the setting of 'Protection against overload only' amateur off EACH time?

  How I bounce back without having to change the setting of 'Protection against overload only' amateur off EACH time?

  This setting should be preserved, once you set it... so I'm not sure why you have to define every time...

  Then... Make sure that you put on ALL the tools of the art of logic in the preferences of LPX...

  Otherwise... you may need to reset the prefs of LPX... Put all the Tools Advanced again and the other preferences you have set... and see if that fixes things for you...

  You can resolve many issues by restoring Logic Pro X back to its original settings. This will not affect your media files. To reset your settings preferences of the user to Logic Pro X to their original state, do the following:

  1. Logic Pro X to quit smoking
  2. In the Finder, select go to folder menu reach.
  3. Type ~/Library/Preferences in the field 'go to folder '.
  4. Press the Go button.
  5. Delete the com.apple.logic10.plist file from the Preferences folder. Note that if you set custom shortcuts, it will reset to the default values. You can export your custom key as a preset before performing this step. See the Logic Pro X user manual for details on how to do this.
  6. If you are having problems with a control surface in Logic Pro X, you can also delete the com.apple.logic.pro.cs file in the Preferences folder.
  7. Restart the computer.

  Note: If you cannot find the files listed above, you don't follow the instructions properly!