PS4 front Port help

Similar Questions

• D6200 front Port help

  Hello

  I read the article:
  http://KB.NETGEAR.com/app/answers/detail/A_ID/24046/~/how-do-i-configure-port-forwarding-on-routers-...

  This shows the interface of Netgear engineering allowing an external port mapping to a different internal port. I want to run port 80 on my public IP address to pass to port 5000 on my internal network IP 192.168.0.5. (External_IP:80 front of 192.168.0.5:5000) On my D6200 option pass an external port to a different internal port is not visible as the example KB. I don't see Port start and end Port when adding a personalized service.

  Judging by the manual, I believe that the D6200 has no ability to translate an external port to a different internal port.

• How can I download photos from my camera card in the small front port?

  How can I download photos from my camera card once I put it in the small harbour in front of the computer?

  Hi Islarich,

  Thanks for posting the question on the Microsoft Community Forums.

  According to the description, it seems you are trying to download images from the camera.

  It would be great if you could answer this question in order to help you further.

  You connect your digital camera to your computer using, USB cable or a memory card?

  To download the pictures from my camera to the computer, refer to the following Microsoft article:

  How can I get pictures from my camera to my computer? http://Windows.Microsoft.com/en-in/Windows-Vista/how-do-i-get-pictures-from-my-camera-to-my-computer

  Troubleshoot camera connection: http://windows.microsoft.com/en-us/windows-vista/troubleshoot-camera-connection-problems

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• BSOD shutdowns and flakey firewire port - help?

  Well I'm getting really frustrated on this laptop, it's almost 2 weeks
  and I already had 2 BSOD the strange accident where the mouse moves, but nothing
  Otherwise, around, it works so a forced reboot was necessary.
  Today, I got a BSOD everything I did was run a few the taskbar called untility
  physician network or something.
  error message:

  PAGE_FAULT_IN_NONPAGED_AREA (no address information)
  STOP: 0 X 00000000050

  someone suggested that I may have a memory problem or my file is corrupted.
  in any case here is a run down on what I installed that day with my laptop.
  -Installed all XP security updates and patches
  -Installed Firefox 1.0.1 (do not trust IE6.0 yet)
  -Iriver (my mp3 player) installed Download Manager
  -Installed winamp 2.0 and Creative Cam Notebook.
  I ran a chkdsk forced start and no problems found.
  Another thing I found interesting was almost every time my laptop BSOD I usually
  find a yellow marker on my net adapter 1394 (firewire port) in device mananger
  ("cannot start device") don't know if that is related or not. A restart seems
  turn off this yellow marker, but I am rather unhappy that BSOD is none what laugh.

  My laptop model is the Equium A60-181 (Intel P4 HT 3.2 Ghz 512 MB RAM)

  Anyone else had problems or similar recommendations?

  see you soon,

  Richard S.

  Hi Richard

  I understand that you that you are unhappy with it all the problems, but there may be many reasons for this. In my opinion this can happen because of some useless day or some drivers installed by third-party software that you have installed on your laptop.

  Please reinstall OS using the recovery CD. After firs start check in Device Manager if there is some hardware problem. If not you than trying to start the free Config (doctor of connectivity) and a few other tools Toshiba to check if everything is ok.

  If everything is ok try to install SP2 if you n t have on your machine (just SP2 and not separately updates and patches). I don't know, but some of the A60 are delivered with SP2.

  Install all your programs slowly and carefully follow what happened after each step you did.

• Small front port by IP source address?

  
  

  # It is not possible. Port forwarding makes it accessible for the entire internet.

• HP a6554f: Front USB Ports not working for a6554f

  Hi, I cleaned the dust from my computer yesterday for the first time because the computer kept crashing. I removed the motherboard, so I unplugged everything that was clinging to her and I also removed the hard drive then plugged everything once I had finished, (do not know if I just plugged in as it was, even if I took a video of it, but the wasen can't good quality so I had to guess a little). I also added thermal compound to the cpu.

  Anyway, everyhting seems to work except the 2 usb ports front of the case. It was working fine until I opened the case (this is why I do not open the computers, but the dust was just too). The audio ports and microphone located in the front work correctly. And the rear USB ports are working properly.

  What I've done so far is running pilot Booster and also I went to Device Manager > USB Bus controllers, then I turned off everything on the list, then allowed them again. And nothing has worked.

  I don't know much about computers so I don't want to go to the hassle of opening the case cause once again I was scared lol but could I maybe hooked up a cable in the port of fake?

  Also, is there a diagram to show where each cable goes to the a6554f model?

  As you pointed out the audio before and MIC ports are working, then it might be just the plug for the ports before USB is not properly or is in the wrong place.  Here is a page that relates to the motherboard. In the lower right corner of the image or the page layout scheme, there are two blocks header before normally taken into USB ports.  Says F_USB1 and F_USB2.  Either we must work to the front ports.  Check to make sure that the wiring box beam (which has the wires going to the front USB ports) is connected on one of them.

• PowerConnect 6248 stacking using the front SFP Ports

  I am trying to stack two Dell Powerconnect 6248 switches. Currently they are chained together, but I modules fibre for the front sfp ports. Theoretically, I should be able to stack them. But when I try:

  stack 1/g45 #stack - port console (config-battery)

  Could not set the front panel stacking mode.

  Any ideas? Thank you!

  The PCT6200 requires a stack of modules installed in Bay 1 (XG1 XG2) at the rear of the switch. The stacking module uses CX4/Infiniband type stacking spacers.

  Stacking of front port / user is not supported

• All the PC Ports USB does not

  Before going away for the weekend, I turned off my PC and everything seemed fine. But after coming back, all the USB ports fail to read the devices. I ended up having to use chrome remote desktop and some luck to have access without a keyboard, but now I'm at a loss for what to do. I looked and tried several fixes, but none worked. Currently, the two "Standard Enhanced PCI to USB Host Controller" s listed in the so-called Device Manager "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) ». Any ideas would help, but so far, I have tried to uninstall/reinstall them normally and tried to delete upper and lower filters, but none were. And I can't do a restore of the system before it started, as I don't have a fairly recent recovery point.

  AHA! I managed to get into boot options advanced and done what you said (as well as what said a few other people to do using the first command prompt) to turn off the signature device, and now the back ports are working again!

  The front ports but are still stubborn (they don't even give power for what anyone plugged). I'll keep working to fix it, but right now I'm really relieved (I also went ahead and made another restore point in case things went south from there).

• Network adapter/USB Port on Windows 7 problems

  So basically, I moved to another House and after do not use my PC for a while something happened my usb port, either my adapter or Windows.

  My computer at the front has 2 ports, usb 3.0 port and a normal USB port that does not for a long time now (broken). At the rear, I 2 s 3.0 and 4 more normal. On my iPad, internet is fast, 35 Mbps download and upload 13. On my PC, once I log on the 3.0 in the front port, nothing happens. Windows can not find anything, do not help convenience stores. I have always used this port before, and the connection was great, although now he doesn't seem to see anything. At the rear, the normal USB ports give me a 0, 50-1, 00 Mbps download and upload, the 3.0 s give me like speed of 2, 50 - 4.00. It worked really better before on the front port, I tried the system restore... That's happened? All the patches? I need really better internet for my PC.

  Roju salvation,

  Please contact Microsoft Community. I've surely you will help solve this problem.

  To better understand the issue, I would need more information on your side.

  1. What is the number of brand and model of the computer?

  2 do you meet any question when you connect other USB devices in the front port?

  3. What are all the troubleshooters that you tried?

  4. do you receive any error messages?

  This problem might have occurred because of these reasons:

  1. corrupted driver.

  2. hardware issue.

  Try the steps listed here:

  Method 1:
  I suggest you to download and install the driver network and chipset on the computer manufacturer website and check if it helps.

  Method 2:
  If the problem persists, I suggest to uninstall and reinstall the Device Manager USB controllers and check to see if it helps.

  (a) press on the Windows key + R, type devmgmt.msc.

  (b) expand USB controllers, click drivers.

  (c) click on Properties, click on the Uninstall tab.

  (d) click OK.

  Note: restart the computer and it will update automatically pilots.

  Check out the link for more information.

  Tips for solving problems with USB devices (applies to Windows 7)
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• device works on some usb ports

  My iPad has stopped working on the USB port in the front on my PC. It keeps connecting and disconnecting.

  It works fine when connected to a USB port on the back of the PC.

  In windows, each USB port has its own driver.  This is why you see the message "installing device drivers" in the notification area when the device is plugges on a unused usb port...

  How can I remove the driver for the iPad that is associated with tha front port so that the iPad is recognized properly by Windows?

  Thank you.

  Frédéric

  The problem could be that the bus from the front port has other pulling just enough power for
  make a difference or other hardware issues.

  If it is not material, these steps can help.

  ------------------

  
  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• HP Pavilion: Before port USB on HP desktop computer has stopped working

  My HP desktop computer is about 2 years old and has two USB ports on the front and a number on the back. I had no problem with any of the ports until I used a USB in the port now broken and caused a power outage that now this port doesn't recognize any USB device.  It says "USB device not recognized.  The last USB device you connected to this computer worked badly and Windows does not recognize. »

  I tried to uninstall and reinstall the USB ports on the Device Manager and have lived all the suggestions on the HP support site and the Microsoft support site. The defective USB key must have caused damage to the track. I hope you can suggest something that I can do to get it working again.

  Hello

  The only port on the front is damaged. The USB key must have damaged only this USB port. I'd like to reuse this memory bar.

  You need to replace the USB module, two ports USB 3.0 of housing as the two front ports use the same module and connections to the motherboard.

  You will probably need to go to HP for the part.

  You should be able to get access to the component by removing the front bezel. Remove the side panel also. You should see the connection of the cable and add him the USB 3.0 connector front on the motherboard.

  Jay

• USB port

  I have a HP Pavilion p7 - 1298c and I can't find the usb port.

  Hi Bill,

  Slide the front cover of the bezel lower down to expose the front ports.

  

• Z210 Convertible Minitowers: Z210: a USB 3.0 card 4 ports compatible?

  I have an Z210 convertible minitour, who currently holds the HP 2 port USB3 SuperSpeed card that is based on the older NEC chipset. It sits in the Slot 3, a PCIe2x1 slot.

  I know that the NEC chipset is pretty old now. But the real problem is that I need a few USB3 ports. I saw a thread here that has considered this question, but does not really all specific maps, and it was related to the Z400, another machine.

  I have had a look and it seems that many tech enterprise vendors offer a card, the CP-4PTU USB 3.0 4-Port PCI Express Card (PG0480) anyone know if it will work in the Z210? Other possible cards?

  TIA!

  Map of NEC had two exits USB3.  HP went with a 4 ports TI chipset based '2 + 2' PCIe card for Z400/Z600/Z800 workstations.  The 2 + 2 means two aft and two if you want to forward.  Z620/Z820 integrated this same TI chip on the motherboard.  Thus, drivers for chips Z620 TI of these workstations work very well for the card on motherboard both chipsets on PCIe.

  I use these TI cards based on my workstation xw6400 and xw6600... they work very well, and I plug them into the second port of PCIe x 16 spare for the max bandwidth of PCIe type II location in the xw6600.  The xw6400 has no connectors all PCIe gen II, however.

  The rear bottom of basket of the map has two ports for two accessories USB 3.0, and there is an addition of port Unified on the map (front) which you can plug a double cable end adding two more USB 3.0 ports (front).  I love the face cards Akasa... high quality and more than enough before long.  They have one that fits great in the floppy bay area and also one for the wider Bay optical since many work stations now do not have a floppy bay site.

  These cards must be powered with a good 5V power from a SATA power supply or a power Molex adapter... do not load software until you give it only + 5V power because some parts will be not visible by the installation program until they are turned on with adequate power.  + 5VDC is not upward on the map of the PCIe slot... only of the power cable.  I'm actually using an adapter less amperage from the floppy power plugs in my xw workstations, but for higher use AGP, I would recommend the spare Molex or SATA Adapter approach.  You can find these like a map without adapter via eBay sometimes... the complete kit of HP is about 50,00.  Search with google for QT587AA for the complete kit of HP.

  What you don't want to... version 2 ports of NEC.  It is the + 5V power supply to the back of the map that you see here, and only two USB 3.0 ports are possible.  This is in contrast to the version of TI chipset below this image of the NEC version:

  

  The TI version is below... There the power plug at the top and the front port double its rear end, below these two capacitors:

  

  You will see that the front bay Akasa kits include a single outlet that feeds on the back of the card via two cables on two USB3 ports.  Eventually you throw this little adapter that see you at the bottom of the picture near the Middle, generally.

  Here is the HP part number, you can use to search on eBay... you'll usually only find the card on eBay, not kit.  HP power supply cable can be very useful to have, and I've seen those if you buy the kit from HP directly.  Otherwise, you will have to dink with other adapters.  The latest drivers are easier to find on the site of HP Z620 drivers.  Part of HP for the card number is only 661320-001.

• Before TC M700 and Windows 10 USB ports

  I have a TC M700 and can't seem to find the drivers for the USB 3.0 front ports on the chassis of the tower. I installed all the drivers for chipset, that I could find. There, someone had this problem?

  Run Windows 10 Enterprise 64-bit

  Thank you!

  Thank you for your response and suggestions.

  I opened the case and concluded that the cable connecting the front ports was not connected. It came out during the transport or has never been connected to the factory. I reconnected it the cable and everything works!

• HP DV6 laptop with no headphone port

  With no helmet that I have to get some kind of hdmi headphone adapter?

  AARGH I'm so stupid
  They moved the front ports! Never seen that before
  Problem solved