PSC 1315v all-in-one: all-in-one printer no power HP photo paper

Similar Questions

• Want to 4500 All in One Printer: Envy 4500 and Photo paper

  Recently, I tried to use my 4500 want to print photographs, using HP Premium Plus Photo paper. Each attempted printing resulted in the printer telling me that there is a paper jam. I would open it upwards, remove the paper (which has never been really stuck - just looks like he started getting into the printer and stopped) and try again... Paper jam. I don't have the paper in the tray - went out my plain paper. I am able to print correctly on plain paper, but it won't take photo paper. Any ideas on how to solve this problem?

  Hi @kpdevlin,

  Welcome to the Forums of HP Support!

  I see you are trying to print a picture on your craving 4500 All in One Printer and it keeps blocking. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Looks like there could be a problem with the rolls of paper, print settings, or the paper tray.

  Please work your way through this guide to see if you can solve the problem, a 'Paper jam' error on HP ENVY 4500 e-all-in-one HP Deskjet Ink Advantage e-all-in-one 3540 Printer series.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  You have a photo that you can try to make a copy of, as a test? It would be to help eliminate the printing as the cause.

  Please make sure that the paper type/quality settings are correct, for more information, please see this guide. HP ENVY 4500, printer Deskjet 3540 - change the Mac OS X print settings.

  In addition, if you have access to a Windows computer running Windows 8.1 or earlier, it is an update of the firmware available for your printer. HP Envy 4500 series firmware upgrade to improve the performance of the printer.

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP psc 1310 all in the printer software does not scan documents or computer keyboard control images.

  HP psc 1310 all in the software of the printer will not scan documents or photos of computer keyboard, control and transfer the file to the hard drive.

  Hi jghall35,

  1. When did you start to question?

  2 have you scan before without any problem?

  3. are you able to scan manually?

  4. What do you mean by the transfer of control of computer keyboard saying the file on the hard drive?

  5. what you trying to accomplish?

  Links:

  Scanning: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/scanning-frequently-asked-questions

  HP support link:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&TaskID=110&prodTypeId=18972&prodSeriesId=360489

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• All-in-one Photosmart HP 3310: colors may not print correctly on A4 photo paper.

  My HP 3310 printer gave me great prints for many years, but during the last 12 months, 210 x 297 mm prints threw a desaturated look and brightness has dulled as well. My photos 10 x 15 cm print perfectly.

  I did all the recommended suggestions, cleaning of the print head, aligning the printer even restore to factory default to no effect.

  I use Spyder Pro 5 to ensure that I have the exact colors on my screen.

  I printed via the printer settings and also the settings of Photoshop.

  At the present time, all my photos contest must be overexposed and strongly saturated for previously appreciated results.

  I only use HP photo papers and real HP363 inks.

  I hope someone can put an end to my frustration.

  Welcome to the HP Forums @-g_s70

  I came across your post about the problem you are having and I wanted to respond to help with my suggestions. Please see the guide below to resolve this issue. If the problem persists after resolution of the problem, please try to call the hotline to discuss replacing the printer or the rating of. I'll include contact info HP below to directly reach.

  HP Photosmart 3100, 3200 and 3300 Series all-in-One - the printed colors are not colors should

  Please click the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• Why my HP Photosmart C4480 all-in-One printing after I removed a paper jam not?

  When printing, I added paper into the tray paper, and the rollers grabbed the entire stack of paper. The printer has stopped, noting "paper jam". I removed the stack of paper in the printer, and now it won't print at all.  (HP Photosmart C4480 all-in-One)

  Thanks for all the useful things try, but without apparent reason, the printer started working again.

• 6510 all-in-one printer 211: 6510 has suddenly paper jams paper

  Paper jams are continuous. The upper part of each leaf has a 1/6 "dent about 1/2" long and 3-4 "on the side. Another paper has same type of damage. Will be removed all paper crowded at the top of the machine. Decided that there must be a mechanical problem and removed the 7 screws of the plastic on the bottom clamp to remove the bowl. When he was abducted some plastic black 11/16 "long with a 7/16 diameter gear on each end is out. The tree has a hole inside had to an axle. I sought visible signs where it may be at the bottom without success. I need advice before I go into it any further.  Thanks in advance for any help.

  Hello

  IAM afraid, you may need to replace the printer.

  Call HP Tech Support 1-800-474-6836 (USA)

  If your printer's warranty, you can be equipped with options of recovery.

• All-in-one HP PSC 1315v: psc 1315v

  When you try to print word documents, the HP PSC 1315v all-in-One print only certain colors.  Currently, yellow and blue will print vaguely, but not black.  The last time, black would print very slightly, but some color would be to print.  Initially, a company logo on a document that I feel would be to print in full, vivid color, but the rest of the text document was empty.  I changed the black cartridge and color with no improvement.  The test page printed was yellow and very lightly colored.  I tried to unplug and plug back.

  Welcome to the community of HP JMFS ,

  I saw your post on your PSC 1315 Print Print print quality problems, and I'd love to help. I peeked through the troubleshooting guide and recommend the one below for your next steps. They should help to fix the problem! I cross my fingers.

  If the steps do not repair the problem, the print head may have failed in their own country and suggests in this case, to get in touch with HP directly on a printer trade or a replacement. I'll leave their contact details here for you also.

  HP PSC 1315 All - in - One Printer - print quality issues

  Details of HP:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

  Let me know the results

• All-in-one OfficeJet J4550: only a fraction of the feed photo paper

  I am trying to print photos of 4 * 6 using HP photo tip on an OfficeJet J4550 paper.  Sometimes it works but most of the time after the initial report pull in the paper and the printer starts to print, paper only continues to fuel in about half of the way through the printing process.  So I find myself with half right of the image about half left of the document.  Sometimes I get two-thirds of the image and sometimes only one third - it varies.  The part of the picture I get is really good!  Any ideas?  Thank you.

  Hey @Steve2034, welcome to the Forums of HP! I'd love to help you to print photo 4 x 6 of your Officejet J4550. I understand that sometimes you can print a photo 4 x 6 full, but most of the time that the book fails to pass correctly so you end up with a partial impression. This happens when you print on 8 x 10 or any other photo paper? What happened when you print documents? Could you please try to make a copy of the photo of a photo 4 x 6 in order to test the equipment and eliminate the software/driver?

  Although you may be able to print documents, and assuming that it's a hardware problem, please complete the solutions suggested, presented in the following document: HP Officejet J4500/J4600 all-in-One Printer Series - Error Message "on paper" and the printer is not Pick Up or paper feed.

  I don't think you see an message to document your description, but the options presented in the document above could solve the problem you are experiencing.

  If the question is indeed solved, please click Accept as Solution button below. If however, the problem persists, let me know and post back with the answers to the above questions.

  Thanks, I look forward to hearing back on your part.

• I have a 7410 all-in-one printer. Is power on but it will not be printed.

  I have a 7410 all-in-one printer, the power is the printer turns on, but when I push the printer button on the light does not come on and it will not be printed. Is there a reset somewhere button? Any suggestions

  This is usually caused by a failure of the wireless LAN card.  You can solve this problem, as shown on this page.  Unplug the connector on the wireless card will disable wireless and correct the problem.  Since you're using USB shouldn't be a problem.

• PSC 1315 all-in-one: paper jam

  My wife was going to print something from our computer and the printer took several leaves inside. It jammed so she shot just leaves in the front now, our computer said there is a paper jam and will not print we. I went through all the steps of the Glade, restarting, etc. that I've read in hp and others who shared their problems. It copies and analyzes very well. The computer tells me that there is a jam. Could have broke us something by pulling the paper to the front?

  Thank you

  Oldfud

  Hi @oldfud

  Welcome to the Forums of HP's Support. I understand your computer continues to tell you that there is a paper jam. I would like to help.

  It is possible that something has been damaged. Although it could be a "hiccup" with the software on the computer. You can try running the HP Print and Scan Doctor. This will check the software. If the problem persists, try this document a view of the "Paper jam" error HP PSC 1315, 1315v, 1315xi, s and 1318 1315 all-in - One Printer Series.

  If you have any questions, or if this does not resolve the problem, let me know.
  If it solves your problem, please click acceptable Solution. This will allow other people with the same problem the solution easily. If you want to say thank you, feel free to click on the laurels.

• PSC 2210 all-in-one: PSC 2210 all-in-one with Windows 10: ok printer but the scanner does not work

  
  

  Hey @Manu37520,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the scanning of your PSC 2210 all-in-one printer to your PC for Windows 10. The printer has no drivers for Windows 10. You will need to use a computer with an operating system prior to analyze.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• PSC 1610 all-in-one

  Can I e-print to my HP PSC 1610 all-in-one?

  Hi JudithAMorrison,

  Just to add some additional information for you, your PSC 1610 is not able to ePrint, as it was released before that HP has applied the ePrint technology for their printers. All new printers are usually capable ePrint, so if you are wanting to acquire a range of HP active ePrint printers, you can contact HP Technical Support at the 1-800-474-6836 and see what kind of offers, they have to get you an active ePrint printer.

  If you need anything more, please let me know. Have a great day!

• I can't scan with hp psc 1402 all-in-one

  1 hp psc 1402 all-in-one 2. Windows xp 3. Scanner not found 4. don't know 5. problem to scan only

  I want to scan hp scan doctor

• HP PSC 1315 all-in-one: error 1632: Temp folder full or inaccessible, when you try to install HP PSC 1315 all in one

  I get the following installation error when you try to install the HP PSC 1315 all in one.

  [code 1632. The Temp folder is on a drive that is full or inaccessible.

  Free space on the drive or verify that you have permission write to the Temp folder.]

  Hi @tasos251,

  I understand that you're seen a message on your temp folder is full, I'd like to help. Please follow the steps below to clean the computer and install the software;

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. Download the software and choose to save money, save it on the desktop > AIO_CDB_NonNet_Full_Win_WW_140_408 - 4.exe
  4. After that the downloaded software and extracted, open the temp folder once again, use the instructions in step 1.
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. Open the folder Util
     
  7. The CCC folder
  8. If you have a computer HP run the L3uninstall.exe. If you have annon HP computer run the L4uninstall.exe
  9. Once the uninstall is complete, reboot the computer
  10. Follow these steps to reset the registry settings and options for Windows Installer.

• HP psc 2355 all-in-one: PSC 2355 all-in-one scan, but not print

  The printer was purchased at a garage sale may be a few years back. It scans perfectly fine, but it will not be printed. I tried searching the Web for drivers and uninstalling/reinstalling it, even the installation under another pilot as series 2300. The closest driver that appears is 2350 series. Windows Update crashes when I try to get to find the drivers more.

  Print a test page once, he hasn't done anything since then except to give me errors on the printer LCD. I have only a black cartridge in it because I don't need color, but I doubt that's the issue.

  From the looks of things, this is a common problem... I saw a post where someone has too, but nothing has worked.

  I am running a computer portable 64-bit windows 7, home premium and USB connection.

  Hey @TKStall,

  Thanks for getting back to me with the error messages.

  The value 0 x error messages you see on the screen of your PSC 2355 all-in-one indicate a hardware failure in your printer ink system. Because the errors seem to be intermittent at the moment it is you may chance using your printer for a little longer. However, there is a hardware failure occurring within the printer and for this reason, there is a chance that your printer may stop working at any time.

  Troubleshooting steps for error 0 x can be found here. But, as you can see one troubleshooting step is to perform a power reset on the machine. If the power reset does not clear the error state that a replacement of the entire unit would be necessary.

  Try to install your printer using the driver PSC 2350. However, if the error messages continue to appear on your printer, I would recommend reaching out to the Technical Support queue by phone about the options for replacement of material. Due to the age of your printer, you may have the option to update your PSC device for a newer model at a reduced price.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  It has been a pleasure to work with you. I wish you good luck going forward with this!