Qosmio F50 - PCMCIA card with 2 USB ports

Similar Questions

• Impossible communication with an electronic card via the USB port of the United Nations

  Hello

  I must communicate with a normal electronic card a mini-USB port / USB (serial, COM4). This card transmits on the airwaves on a frequency range that I must address.

  When I plug, the PC detects it and accept it (I installed the driver). Plug-in the HyperTerminal in Windows XP to send instructions in hexadecimal this carte pour what change the range of frequency on which it issues.

  Furthermore, neither MAX nor Agilent Connection Wizard not the detected and none are able to communicate with it, everytime the same message error "no device detected".

  I tried under LabView to send instructions with assistant IIOA, no results. I also tried the instructions 'Config VISA' and 'Entry VISA', trying to write in hexadecimal and normal mode, nothing works. Under labView I have yet no error message, nothing. Nothing.

  I don't understand. I know that it is still possible to drive it under LabWindows, but under LabView (8.5) nothing, not a clue.

  I have the latest version OR-488. 2

  Y ' have a procedure to follow pour such communication of?

  Thanks for any help that would be welcome.

  Kind regards

  Zoe.

  Hello

  The NOR-488 driver. 2 is the driver for the hardware from National Instruments GPIB; If you communicate to the port of of a USB through, this will not impact your code or on the resources used. The only element in common with your VISA application EST enhancement. It provides a unified API pour different types interface with instruments (series, Ethernet, GPIB, VXI, etc...).

  Under MAX, on cannot hole your communication card, only the serial port. The first chose to do is therefore to ensure that the serial port 4 is clearly visible under MAX. You can then the uti Test Pannel VISA pour send and/or receive orders to/from your card.

  If these elements do not allow you to properly configure your hardware, n 'hesitate to send a capture d' screen of the configuration under MAX. If you have a CVI code that allows you to interact with the map, it might be interesting to join, so you can see how interactions with the material are made.

  Kind regards

• Tablet HP 8 G2 1411: Problems with my USB port on my Tablet

  Problems with my USB port on the Tablet connector. Fees sometimes and sometimes not.

  Hello and welcome to the HP support community!

  Micro USB ports tend to be quite fragile.  A good accidental yank on the cord that connected while can be enough to cause damage.

  If you want to organize repairs, contact HP directly.

  To contact HP directly, click on this link: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  Outside the U.S.: http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
  
  WyreNut

• NB200 running Windows XP - what is wrong with my USB ports?

  I recently bought a new NB200 and have had a problem with my USB ports since then.
  Regardless, the two ports of HHR work fine with my Logitech wireless mouse - unless I have fixed via a USB hub. When I use the second port to connect any other device - in this case an external DVD - RW - the mouse just freezes. Meanwhile, the DVD - RW himself is recognized by Device Manager, etc - ('output work well - with plenty of power available per port), but it is nevertheless unable to work and Windows Explorer is unable to read any disc inserted in it.
  In addition, the USB port on the lhs is pure decoration only; nothing that I relate to it (even the mouse) won't work, neither will the capacity load & sleep (at one of the 4 Modes).
  I uninstalled the USB controllers and the ports using the Device Manager which, after re-booting, continues to report that all is well, both with the devices I attached and the ports themselves, though i's obviously not yet!
  I am concerned that I am still unable to create a recovery disk if the worst should happen if someone can help me solve my Riddle, please?
  I'm doing something wrong or, less likely to be the case, I am sure, is there maybe a problem with my machine?
  Any advice would help, please.
  Concerning
  Bob

  Try to update the BIOS to version 1.50, this solves many problems.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  By

• 3 laptops different ALL been facing intermittent problems with the USB ports.

  We have 3 laptops at home, running 3 different versions of winsows 7... Home, Professional and Ultimate. They have in recent months ALL given intermittent problems with the USB ports. A device that worked on a port stops working. It may or may not work on another port. A week later it could very well lead again on the port that wouldn't work. This applies to all types of devices.

  A few more questions:

  Is there a USB device that you use with all three computers?

  This problem occurs with all kinds of USB devices?

  The is the problem with all the USB ports on each laptop?

  Have you tried to reinstall the USB drivers? As in, uninstall via the Device Manager, restart your PC and allowing Windows to reinstall?

• Problem on the Qosmio F50 - 10Z card reader

  I had this problem for a while, he started with the original OS Vista 32-bit, so I decided to buy the cd to upgrade toshiba for windows 7, after the update level, everything worked fine, except for the card reader, regardless of how many times I have installed/uninstalled, installed the driver, it wouldn't work!

  So I used the recovery cd, not once BUT TWICE, and nothing helps I sent to repair.
  I received a message on a piece of paper telling me that it would work on the original operating system, I thought that they had something fixed.
  Then I used the recovery cd AGAIN and to my excitement thrown short to see any yellow explanation points I put a micro sd card (2 GB) that worked when I bought this laptop first and got no response.
  The biggest problem is that my warranty is now closed!, so basically, I've been HIT MORE, cause the memory card slot does NOT WORK and it wasn't a software problem!

  Any reccomendations?

  Hi karimtarek,

  Which driver version you are using on Vista and Windows 7? My Qosmio F50 is running Windows 7 and I m using the version of the driver on Toshiba page 1.00.29.02.
  You use the same version?

  In addition, it would be interesting to know if the SD card has worked once you have received the notebook service center back. Have you tested before or did you start installation recovery immediately?

  Have you tried different brands of SD cards? I always use the SanDisk Extreme cards because they did not no problem.
  In addition, you could try updating the BIOS. Maybe this works if you are using an older version

  Last but not least if it s does not always work and you think that it s a hardware malfunction, ask at the center of service again. If you speak a bit with technicians, maybe they can fix it as a gesture of goodwill.

  Good luck! :)

• PCMCIA card as a serial port RS232 on Satellite Pro 4200

  I think to use a PCMCIA card as a serial RS232 port. The program that I need to use runs under DOS and needs two serial ports. My question is that I need to run the program and the serial port to be recognized by the system. I have a satellite pro 4200 laptop PC series.

  Thank you

  Why on Earth if you want that?
  Your laptop computer with a serial port doesn't have it?

  Well for the serial ports are standard supported on Windows. In a back box that should be no problem.

  But pure back could be a problem.
  I guess you must also BACK drivers for your PCMCIA card...

• Qosmio F50 - graphics card may not be recognized under 64-bit Windows

  I installed the operating system Windows XP 64 on Toshiba Qosmio F50 - 10K. I have a big problem, because Windows XP does not recognize my graphics card (nvidia geforce 9600 m gt).
  I tried to install the drivers from the nvidia site, but once this graphics card still has not been recognized.
  It causes that, when I try to push and drag a window, I can see how it is re-paint.

  Could someone help me to solve my problem?

  Hello!

  I think that the problem cannot be solved. Toshiba doesn't support any laptop computer with Windows XP 64-bit because it is OS was not so popular.

  The only way I know is to use drivers from external Web sites and update your BIOS to the latest version. If it doesn't work, you must use another operating system.

  I think that the Qosmio F50 is really fast enough for Vista 64-bit. Try it and you will see too much work.

  Good bye

• Install on MacBook BootCamp with no USB port

  Dear community,

  I would like to install BootCamp on my new MacBook (MacBook8, 1 ongoing El Capitan 10.11.4), which does not have a USB port.  I was encouraged by this post: http://blog.twocanoes.com/post/130203487014/apple-boot-camp-no-longer-requires-u sb - flash drive , but when I run the Boot Camp Assistant, I don't see the interface he means.  I wonder if there is a workaround solution known to you guys, who maybe is to manually create the partition OSXRESERVED mentioned in the article.

  I also thought that maybe a firmware update would be useful by train, but the information here at least (on EFI and updates of the firmware SMC for Mac computers with processor Intel - Apple Support) does not include my MacBook8, 1 identifier.  (My current boot Version of ROM: MB81.0164.B13 and SMC Version: 2.25f87)

  Thank you

  Mike

  The hole where you put your charger in is a versatile connection. There is a small adapter from apple, you can put with three connectors on the other side: a HDMI cable, USB3, charger.

• Problem with the USB ports, coast and Bluetooth in Satellite A100-237

  Hello, I own a laptop Satellite A100-237 and I have an annoying problem for quite a while now. The two USB ports in the side as well as the Bluetooth device will not work. What is the bluetooth device is it is simply not recognized by the system, as if it wasn't there (it is said the installation of the driver too) while any device I connect to USB ports side does not work either.
  The other two USB ports in the back work very well.

  Hello

  Maybe this two ports are really defective, and there is not much to say. You will get your laptop for repair, or you live with it and use the other two USB ports. Sorry, but I see your ad as a report short and not as some to ask for help.

  Bye and good luck!

• HP 15-f024wm laptop computer: laptop does not recognize the SD card into the usb port

  I don't have a sd card reader on my laptop but have used a map on her usb adapter and it worked. I had to make a full recovery, update and reload the browser and so on. HP has spent hours helping me to get back to his normal race car computer... but this issue remains and can't find what I need to do the usb - SD card reader. Yes, the usb port works as I use it for other things.  Don't know what I'm missing.

  Hello

  Your machine IS not card reader. His record:

  http://support.HP.com/au-en/document/c04420347

  which indicates:

  External ports:

  • Multi format digital card reader for Secure Digital cards
  • 2 superSpeed USB 3.0
  • 1 bus (USB) 2.0 universal series
  • 1 HDMI
  • 1 PORT RJ-45 (LAN)
  • 1 plug headphone-out/microphone-in the drop-down list

  Location:

  

  Everything you need: download Driver Realtek card reader and install it on your computer.

  http://ftp.HP.com/pub/SoftPaq/sp66501-67000/sp66959.exe

  For your question: all the USB ports work?

  Kind regards.

• Automatic update because of problems with the USB ports.

  After an automatic update this morning at 03:00 October 15, 2010 for windows vista, all my USB ports on my laptop have stopped working. Please advice all solutions to locate the update caused the problem.

  This must be a different problem from what I had so...

  In any case, I uninstalled all updates on vista (as opposed to other programs, office, outlook, etc.) and then reinstalled again and everything works fine now... go figure: /.

• problems with my usb ports

  I recently got my laptop and my mouse stopped working, I originally thought it was just that the mouse was dead. After having bought a new mouse, that he has not yet decided anything, I tested the two mice on my friends laptop and they work fine.  I was wondering if there are any patches, can I do I have tried troubleshooting and that didn't work other than sending to any ideas what I could do?

  Hi cpav0625,

  1. this question comes up with other USB devices also?

  You can try to run the Fixit and check:

  Check out the link:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• 15-in-1 reader (USB 2.0 with 1 USB port) 2 USB 1 1394 Audio (headphone Sockets and microphone)

  I have a pavilion d4996t on which the 15-in-1 card reader is a failure.  (USB 2.0 is no longer detected by the system and cannot write on cards SD.)  I want to buy a replacement but can't find documents in saying what the product number is for the 15-1card Reader / USB 2.0 unit is.  Anyone happen to know?  I've been looking at different websites hoping that I could find a match with a picture, but the few who have photos aren't mine.

  Thank you.

  Real components are separated.   http://PartSurfer.HP.com/search.aspx?SearchText=KC787AV

  The 15 in 1 player's 5070-2040, USB/Audio Unit depends on the connectors, IE 5070-2055 or 5070-4708.

• Qosmio F50-125 starts with black screen after a BIOS update

  Hello

  After instalation if new bios (v 2.0), computer sometimes starts with black screen.
  Even the first page that show press F2 to enter the bios is not displayed.

  You have someone older version of bios?
  So, I might try if it's the fault of it.

  Hello

  I think that the old BIOS will not help you because the laptop would have known that you try to update the BIOS to the older version, and it would break to the top of the procedure.
  In addition, the older BIOS is not available on the European driver Toshiba page.
  I think just only a Toshiba ASP had an older version of BIOS.

  Anyway, you said that sometimes happens.
  This means that this issue doesn't still persist
  Hmm. in this case, I recommend the default BIOS settings and update the driver display.

  Check it out!