Qosmio g20 - best replacement screen?

Similar Questions

• Qosmio G20 beep a screen much and dimming - why?

  Sometimes my Qosmio G20 begins beeping very much and reduce the brightness on the screen.
  This happens while it is running on the current and with the option of putting to the highest level.
  Simoultanesly there is some blue lights above the keyboard that will start to blink.
  The only way to stop this behavior is to press the button under the flashing blue light and then go into a control panel handle power settings. To do that I have to change the brightness, press on apply, restore the brightness and press on apply again. After that, it can work for a long time before the next incident.
  I have the latest Windows updates, I have an anti virus installed, and I remove spyware installed, so I don't think that those who are to be suspected.

  This happens usually when the PC play a film, but occasionally, sometimes while I play a game or when I use it for work.

  Any help will be appreciated.

  concerning
  Olav

  Hello

  I recommend checking out Toshiba's energy saver.
  Select your power mode and check the action of setting parameters.
  Please check the settings of the alarm level.
  You should take a look also on the basic settings. There, you can control the brightness of the screen.
  Please keep in mind that the device uses patterns of Toshiba power saver in the Windows power options properties.

• Qosmio G20: Definition of screen resolution to 1680 x 1050 for external monitor

  Hello

  I have a G20 running XP Media Center with a Nvidia GeForce Go 6600. I have used the setting of 1440 x 900 so far on the screen of the laptop but just bought a 22 "monitor and uses instead.

  The problem is that the screen resolution is 1680 x 1050 and I can't seem to be able to define it. The only options are 1440 x 900 or 1600 x 1200. Anyone know how I can get the graphics chip at the exit of 1680 x 1050?

  Thank you very much

  Post edited by: [email protected]_UK

  Hello, William

  I have no experience with that, but some share on this forum I have read similar topic. Before you wait here use advanced search option and 1680 x 1050 as search terms. I'm sure that you will find this topic where a guy explains how to set the resolution to 1680 x 1050 on external monitor.

  Good luck!

• Vista on Qosmio G20 - impossible to activate several screens

  Hi all!

  I have a QOSMIO G20, and I put on him, with very hard work, WIDOWS VISTA ULTIMATE.
  Everything work ok, just one thing make me in trouble... I have a Gforce GO 6600 graphics card and when I want to activate SEVERAL SCREENS, don t want detect my TV.

  I try to change your driver, but Vista say NO, this IS THE BEST DRIVER.
  I'm trying to change all the options in the NVIDIA Control Panel... nothing!

  Please, I need help! Maybe my graphics card is damaged? Is too old?
  When I connect the laptop with TV, I have sound on TV but no picture.
  All ideas are welcome and thank you!

  >... and when I want to activate SEVERAL SCREENS, don t want detect my TV.
  Can you please describe to us what you want to do exactly and how do you do that?

  It's a running application when you try to use several poster?

• Replacement of the monitor on Qosmio G20

  Hey guys,.

  I'm having some trouble with my Qosmio G20 I would appreciate your help on.

  In the month of October, I had an accident with my laptop. Basically, I dropped it and that ruins my monitor and optical drive module, monitor protects. Fortunately I had assured him so after £920 and a month, it has been repaired by Toshiba replace all component defective and execution of a comprehensive control system to make sure everything worked.

  Just today a thin green/blue line appeared on the site of the left hand of my screen makes me extremely frustrated. The computer has been moved at all to justify a hardware failure. I checked the right graphics card find no problem at all not connected an external monitor) so I think the monitor replaced module was faulty.

  Do any of you know if I am eligible for a new free replacement of defective or is monitor - this something else goes terribly wrong with my laptop?

  Thanks in advance for your help.

  Tony

  Hello Tony

  In my opinion, you should contact agree that fixed your laptop as soon as possible. Explain the situation and hopefully they will help you. As far as I know that you have a warranty for all new hardware. I don't know how long but the new parts are guaranteed.

• Qosmio G20 screen of text or symbols on startup

  Qosmio G20 139, at the start of the Qosmio laptop appears and then it immediately goes into a screen of text or symbols. Is continuous to load see the Windows XP screen then displays vertical blue dotted, then goes to an error page showing the nonpaged page error error 0 x 00000050. Then restarts and goes around and does the same thing.

  I used the recovery disk and it worked fine for a few days the have reappeared.
  I checked the ram and hard drive and there seems to be some errors.

  Now reinstall drive does not load correctly.
  If a page comes up saying installation is not complete.

  > I checked the ram and hard drive and there seems to be some errors.

  How did you check that?
  Have you used a new test strips of memory and the new HARD drive?

  To be honest, I don t think that your HARD drive is affected. The vertical dotted lines, could be more related question of graphics card in terms of the HARD drive.
  RAM question could also be possible, but I think that its GPU.

  By the way: you are able to access the BIOS?
  Turn on the computer and press F2. Then leave the laptop in BIOS for a few hours to check if some problems arise.
  Would be interesting to know how the unit would be

• Qosmio G20 screen is comatible with display Qosmio G10?

  Hello

  Dose anyone know if the screen Toshiba Qosmio G10 is compatible with the Toshiba Qosmio G20?

  Thank you guys

  Of
  Sweet

  Hello

  I think display of the G20 should be compatible with the Qosmio G10 display.
  I searched a bit and found that the Qosmio G10-100 PQG10E was fitted with the 17 "WIDE XGA LCD.
  The Qosmio G20-101 PQG20E supports the same 17 "WIDE XGA display.

  Therefore, it seems that both units use the same screen.

• Qosmio G20: How to get rid of the large green volume screen?

  Hello

  I have a Qosmio G20 I bought at the Japan last year and have since changed drivers and English operating system. However one thing ive noticed, distinguished by the Japanese put in place, it is that whenever I adjust the Volume level by using the wheel on the right side of the laptop, a large green level Volume display appears on the screen. I want to get rid of this cos it takes place close to half of the screen. The Japanese version had this problem.

  I checked all the settings in the Panel and the various sections of both properties but couldn't find anything.

  Suggestions how to remove it? Qosmio users have this on their screen?

  Thank you.

  Hello

  Berga is right. This volume indication disappears shortly after.

• Gray glittering color screen on Qosmio G20-120

  Hello
  I have a problem very confusing with my new Qosmio G20 - 120.
  I can see vague and wink on my screen when the brightness is set to 2 or 3 levels under the maximum, and the background of the display is set to dark grey (or other color non-black)
  This effect disappears when the brightness of the display is set up, but you know, I can't work with the maximum brightness all the time, because my eyes get tired very quickly in this case, especially in the evening.
  I saw the other G - Series 17 "notebooks and noticed the same problem.
  Is it possible hardware problem or this is common for Qosmio 17 "poster?

  Hello

  I never heard the show. The fact is that you can change the brightness of the screen on many laptops Toshiba, but I've never heard or seen of wave or nod to the screen. I m not sure if it s only your vision or it s a really a display error (FL-UPS).
  If you are not sure of the fault, then take the unit to your local dealer or contact the service of Toshiba.

• Screen is blank when Qosmio G20 starts up

  When I turn on my Qosmio G20-110 I hear the usual chimes and on my LCD backlight lights up but nothing else on the screen.

  Any ideas?

  Hello

  Have you plugged an external monitor to the laptop? Maybe it s something wrong with the display internal and so you can see anything on this subject. It s worth a try because you can check this in a few minutes.

  But I guess that it s a hardware problem with the display internal and/or mainboard or something other than your laptop must be verified in professional people, they can disassemble the laptop and exchanging parts of equipment.

  On the Toshiba site, you can search the nearest service provider authorized good luck!

  Welcome them

• Qosmio G20 - could not get the video to display on the LCD screen

  I have a laptop Toshiba Qosmio G20, running Windows XP MCE.

  The DVD player on board isn't sounds very well so I thought I would plug an external DVD drive to expand its use. After a lot of internet research, I finally found how to do this. Here's my setup.

  Using the monitor port I used the adapter 3 RCA jacks. (There is no S-video on the DVD drive and an adapter did not work). I finally discovered that in order to get the image on the screen, I have to use Fn + 4. Now, here's where I'm having the problem. I can't get the video to display on my external LCD. FN + 5 didn't do. The monitor is an I - inc AH191D and is connected by VGA cable. There is no driver other than the one for the VISTA operating system... That is why it is not anywhere in the Device Manager.
  Here are the settings I use in order to have all that shows on my desk, shows on the monitor.

  In Control Panel open to the screen. Properties
  Number chosen 1 - multiple monitors GeForce Go6600 video card...
  Advanced under
  the GeForce G06600 tab,
  nViewDisplay Mode: clone 1 a 1 b
  The main screen: digital flat screen
  Secondary display: AH191

  I also tried using the properties of controls on Toshiba. He says under TV output TV output but gives options of the program, but I don't know what I would use. Any ideas out there?

  Wait I'm confused, if you try to send the output of your external DVD drive in the laptop, and then display the image on an external monitor attached to laptop?

  If you use the DVD player on your laptop, it will be good quality S-video as a signal of low resolution.

  Is there something wrong with the DVD player?

  If it's just the DVD software you don't like, you can download other DVD players. PowerDVD is excellent, its better than WinDVD and other players in my opinion.

• How to connect the Qosmio G20 to screen plasma HD

  Hello... I'm so confused! ... Please can someone advise me... Read all the posts on this... What is the best way to connect G20 - 139 running Vista Home to a Plasma HD? ........ Can I buy a D-video to HDMI Cable (searched on the net but not sure of what I seek in a cable... (LOL)... any help please... I am not an expert!

  Hello

  If you have time please check this topic http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=11821

  For me, it is very interesting and you can find a very interesting discussion on the Qosmio G20 to connect to an HD-ready LCD TV.

  Good luck!

• Qosmio G20 - spot on the screen

  Coffee was spilled on my Qosmio G20 yesterday, my first reaction was to try to keep out of the keyboard and PCB below, but this resulted in a few enter the screen leaving a stain on the left hand side (the region is actually brighter than the rest of the screen).

  Are there instructions anywhere on the disassembly of the screen as I wonder whether to go inside and try to clean this area or just live with it.

  I have no Toshiba dealers anywhere near me and that you do not want to send the laptop away for several weeks.

  Martin

  Hello

  The spilled liquid is still a serious problem.
  But it seems you're a lucky guy and the liquid doesn't damage the motherboard and integrated circuits.

  In any case, I would not recommend opening the laptop itself. Looks like you haven t a lot of experience with these procedures.
  It s always risky to disassemble the laptop. The chances are high that you damage to other parts.

  Finally, you must know that you will lose the warranty if you disassemble the laptop itself.

  Good bye

• Qosmio G20-117: bad pixels on the screen and the CD rom does not work

  Hello

  I have a problem with the computer hardware. I got a Qosmio G20-117 and you have a problem with the cdrom and the screen. Got bad pixels on the screen, and cdrom does not work. I live in the United Kingdom, so I tried signing up to them to choose the computer before the computer is out of warranty.

  Whenever I register, it says sorry, an unexpected error has occurred, please try again later. I have tried at least 20 times since yesterday and it doesn't seem to work. I have them even called and they told me, the service is stopped and will be fixed this morning but yet nothing works.

  Any solution?

  Hello

  If you want to contact Toshiba service partner in your country then why you don't call them?
  Toshiba page you will find the database with all service providers in the world.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true

  I don't think that you need to register something apart from the serial number of your laptop. But in my opinion this could also be done at the point of service.

• Qosmio G20-127: failure to screen after closing the lid on Vista

  Hello

  I have a Qosmio G20-127 and I recently installed Vista Ultimate (32 bit). I managed to put everything in its place (except the magic buttons, but the drivers are not on yet), but I have a problem that makes me seriously reconsider coming back to XP MCE.

  When I close the lid of my computer, the screen turns off of course, but when I open again, it does not turn, but it stays black. And I can't turn it on again no matter what. I have to turn off the entire computer and it is quite unrealistic.

  Funny is that after a restart for about 20-30 minutes, I can open and close the lid normally, but the same problem occurs after a bit more time to work on the computer.
  The problem persists even though I disabled everything remotely connected to the closing of the cover.

  Does anyone have a solution?

  Hello English

  Try you update the BIOS on the VISTA OS?

  I can imagine you will always find something new and unusual, but please note that Vista is not supported by the OS for Qosmio G20 (Vista drivers are not available on the Toshiba download page) and you can expect that from time to time, you will discover new disturbing behavior.

  I recommend you to install and configure Vista as described in the topic of s Francisco, configure OS for your needs, and be happy if you use Vista without any serious problems. In my opinion, for OS installation and configuration software Qosmio is Toshiba laptop more complicated template, and you will never be able to configure it as a supported and preinstalled WXP MCE. Commands supported are tested and bugs are fixed, but not with Vista on Qosmio G20.

  Sorry my friend. Sounds stupid, but maybe that's just the truth. By the way: I like Qosmio G20. Maybe I'll buy one if the price is Ok.

  Good bye