Question of conncectivity wireless

Similar Questions

• Tecra M1: Question about 21003B wireless adapter

  I have a Tecra M1 with 21003B wireless adapter. Company connection to one of our Wi - Fi points poses no problem - stay connected is a science.

  All the 1-2 hours all Wi - Fi access points 'disappear' app to auto-detection. The only way to reconnect is to disconnect XP (SP2).

  Any ideas?

  Hello

  Well, this really strange question. I found on the site of Toshiba four different
  WLan drivers. I suggest trying another driver, maybe this will help.

  Best regards

• Satellite Pro L300-11n: questions realtek RTL8187B wireless adapter

  my wireless is down from time to time and im speeds do not get very good download.

  is the realtek card right? as im trying to get new drivers for it as I tried to update via the Device Manager and he said he was aware, but I can't see why her act like that, it was bad yesterday but its worse today, I bought the laptop last week

  Hello

  I recommend the update to the BIOS first.
  Then update the WiFi adapter driver and check if the same question would be reappears.

  Good luck

• Questions about syncing wireless keyboard and mouse 5000?

  How can I sync my old 5000 for a new mouse 5000 keyboard and the receiver?

  Hello Eamon,

  Welcome to the Microsoft Community Forum.

  According to the description, I understand that you are facing problem when connecting the new Microsoft mouse USB dongle receiver with the old keyboard Microsoft Wireless 5000.

  I suggest you to contact the Microsoft Hardware support for assistance.

  How to contact Microsoft if you have questions about your hardware device.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• Wireless rookie - question about mesh wireless internal

  I was asked to help set up a wireless network for a medical center. We have a lot of time before its opening, then it's time to test. I would like to recommend some sort of redundancy between the AP in this time, it will take about 16 to cover the area. Being a medical institution, if a resuscitation access point fails, better if the client devices connect to another. My question, am I right to say that we need a controller to achieve? I built and installed the wired LAN, so here's my chance to build my skills wireless

  Thank you very much

  Ray

  The best way to build redundancy into your wireless infrastructure is to use a concept called "microcells". By installing more APs to the smallest power of radio, you have the luxury to increase the signal strength of nearby access point if it does not. Consider the alternative, which is to install less APs 100% power, but if we fail, you cannot increase the power of APs nearby.

  Now, a controller can adjust automatically is close to the levels of power of the APs when it happens, but it can be manipulated manually in a stand-alone environment.

  Finally, if you have already installed a wireless to 100% of power infrastructure, you can install redundant APs in a standby mode. AP backup monitors the active PA, and it lights up immediately if the active access point fails. You must usually install these APs right next to those involved.

  Regardless of the redundancy used, customers will see a hiccup in service when the AP goes down. This can be avoided, if the new access point roaming must be extremely fast. This will only affect you if you are using time-sensitive applications, and even in this case, it might not be noticed.

  I hope that helps! Let me know if you have any questions.

  Jeff

• HP Pavilion DV6 questions intermittent of wireless connectivity.

  For the last 6 months I had serious problems with my laptop. It uses the Intel Centrino Wireless-N 2230 wireless card.

  The problem is that every 30-45 seconds it will drop my connection. It happens so often that it is impossible to fill a simple speedtest, and even less sign up for classes or watch a video.

  Then to find my internet connection I have go troubleshoot, resolve some random error, it appears, wait two minutes, sacrificing an animal and then try to use everything I was doing. As a student who doesn't have access to a wired connection on a regular basis, it is a major PITA. I wish I could just get a new computer, but it is currently not in the budget.

  I thought that the drivers were updated so I found on the HP website and downloaded but they were 2012. I hit the update (while in the Device Manager) and it updated to a new two months (as expected by Intel) but the problem persists.

  I started my computer in safe mode and the wireless worked without any problems. That would point to what is a compatibility problem with other programs rather than a hardware or driver problem?

  Any advice would be greatly welcomed, because I literally lose. I very desperately need this computer for school and can afford a new at the present time (and frankly, I'm rather fond of this computer).

  Edit: The driver concerned from the Intel Web site: 15.13.0.2 published on 22-07-14. As far as I know, this is the most recent.

  Hi there @KAHarvey

  Welcome to the Forums of HP Support!

  I understand that you have difficulties with your internet, but which is working fine in safe mode. This would indicate that something which is loaded in normal mode is the source of the problem and will require a bit of the investigation. If the hardware does not work safe mode, the hardware is fine, the problem is elsewhere.

  You can have a go at this page and see if something helps you:

  Troubleshooting your wireless network and Internet access (Windows 7)

  One other thing to try, as an experience is to temporarily disable the firewall. I do not recommend doing this for a while, just as a check to see if it is part of the problem. If you notice he's working, then I would look at either uninstall the firewall then put it back in place, or restore it to its default settings. It really depends on the firewall you are using.

• Question of B550 Wireless all-in-One

  So I'm a happy owner of ideacentre B550 that came with windows preinstalled 8.1. After using it for awhile, I switched to linux due to some work stuff, then completely uninstalled victory 8.1. Now, I just installed windows 7 x 64 and had some problems with the drivers. A lot of things lies in my device manager is marked under "other devices", however, no wireless adapter. I have not found driver WAN to windows 7 either - so what should I do? Looks like connection via ethernet is the only legitimate way?

  Good day and welcome to the community.

  Please take a look at your support pages to find available drivers:

  http://support.Lenovo.com/us/en/products/desktops-and-all-in-ones/IdeaCentre-b-series-all-in-ones/ID...

  I hope this helps a little.

  Kind regards.

• Question about new wireless mouse:

  Got a Mobile Mouse Wireless 4000 for Christmas.

  I went through the installation process.

  The mouse seems very 'jerky' or 'jumpy' - do not know how else to describe it.

  What setting change to fix this?  TIA.

  Hello

  Have you installed the latest version of IntelliPoint for the new mouse?

  Microsoft Hardware - downloads
  http://www.Microsoft.com/hardware/en-us/downloads

  There might be a problem with the mouse - it solve problems you can and if necessary contact
  supported.

  Wireless Mobile Mouse 4000 - has a 3 year warranty
  http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=013&active_tab=systemRequirements

  Microsoft Hardware warranties
  http://www.Microsoft.com/hardware/warranties.mspx

  These mice are delivered with 90 tech support of day of the 1st incident that was about to begin when
  contact Microsoft at the number below.

  Hardware support of MS and warranty claims
  Tech Support 1-800-936-5700 for MS Hardware.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Questions of frequency wireless network (must be 2.4 MHz!)

  I just spent two weeks of struggling to get my new Photosmart Premium (C309g) to join my 802.11n network.  At one point I even learned by HP phonesupport that this model is only compatible with 802. 11 b / g and that's why the model number ends with 'g '.  Fortunately, not proven to be true. In fact, this product works as advertised, with a warning not to disclose:

  MUST BE ON YOUR 2.4 GHz WIRELESS NETWORK.

  I got my network configured to operate at 5 GHz.   I changed it to 2. 4 GHz, and now my Photosmart Premium works perfectly.

  What a pity that this minor detail is not in one of printed or online technical documentation of the manufacturer. If all goes well in sharing this information I can save someone else to go through the frustration that I did.

  I can't believe that our support officer told you that the g in g 309 means the printer only 802. 11 b / g compatible.  It's not that the suffix in the model number means.

  By definition, 802.11n devices are compatible with the networks of 802.11 g (as vice versa) as long as they are on the same frequency (2.4 GHz or 5 GHz) band.  Currently, all of our 802.11n printers operating in the 2.4 GHz band only.

• S10-3 questions of WiFi: Wireless function / antenna disabled - unable to connect to a WiFi network

  I recently bought an IdeaPad S10-5 / Type 0647 / Windows 7 operating system.

  I can't connect to a local wireless network at all. I can't even see all WiFi networks in my grand that I can see with my notebooks in use.

  Atheros AR9285 wireless network adapter driver seems to be updated ((version dele de pilote est 8.0.0.279).)

  I tried various things such as deactivation and activation of wireless networks / adapter, looking for the latest version of the driver etc without success.

  I activated the WiFi to the computer (setting of the HW switch) and but if I go through the (Systemsteuerung) Control Panel and Device Manager I get the message AdapterLAN connection or the wireless function is disabled

  Lenovo ReadyComm told me that the antenna of the wireless device is turned off.

  If I can't solve this problems, I'm afraid I have to return this computer.

  Any help is very appreciated.

  Thank you and best regards.

  Hello and welcome,

  Uninstall Readycomm.

  cordially KalvinKlein

• Yet another question s10-3 wireless

  SUP yall... Just got my s10 - 3 pre-installed with windows 7 starter, but being the old skool, I reformatted with XP through lenovo driver offers full support. So things have been going pretty well with it, until all of a sudden, he acts as the wireless hardware switch is set to off, even though it is clearly not not off the coast. I was cruising around these forums and goggling wildly and all I can find is people having problems with readycomm, which I have not installed.

  Basically... think netbook hardware wireless switch is still off and I do not have installed readycomm. Any thoughts?

  ignore me. I did exactly what the last guy said here: http://forums.lenovo.com/t5/IdeaPad-S-series-Netbooks/S10-3-WiFi-Issues-Wireless-function-antenna-de...

  -Quick start installation

  -Repair installation of QS to make it work actually correctly

  -Start QS and pressing Fn + F5 to turn on WiFi - this turned the WiFi light on permanently.

  -Leaving QS and cold-start in Windows

  flawless victory

• Wireless Mobile Mouse 1000 matching question

  

  Hello
  I have a question about the Wireless Mobile Mouse 1000 matching.
  As my work still smiling but my receiver lost nano, my friend gives me his nano-receiver due to the fact that his mouse has beaten already.
  How can I pair them up in my computer?
  Thank you.
  PID: 01618-523-5267323-91249

  How can I pair them up in my computer?

  You can not.

  Most of the new products Microsoft wireless mouse does not support user "pairing".  I think the Mobile Mouse 1000 is one of them.  Confirm by viewing photos in the article linked in the title of the "method 2" in the post of Smittychat: http://support.microsoft.com/kb/838398 
  If your mouse and transceiver do not have the "connect channel" buttons, you can not pair.

  For these products, the mouse and the nano transceiver are matched at the factory.  If the transceiver is lost or broken, the mouse can't work.

• Satellite L750D-159: different problems: wireless network adapter, freezes, power

  Hi all

  2.5 years ago I bought L-750d-159:
  Video: AMD Radeon HD 6520G (TM)
  Wireless: Atheros AR9002WB-1NG wireless network adapter
  CPU: AMD A6 - 3400 M APU with graphics Radeon (TM) HD
  RAM: 4 GB
  OS: Windows 7 Home Edition SP1, 64-bit.
  BIOS: 2.1

  For the majority of the last 2.5 years I had the same questions, alternating between them over and over again without solution in sight.

  Repetition of questions: *.
  1. wireless adapter goes dead, no help of the troubleshooter in windows. Only restart help to, rarely he demans restart another. at the same time #2 arrives:

  2. cannot read USB (IE external HARD disk). allows you to restart.

  3. wireless mouse does not respond. Randomly, reset help.

  4 gel. Sometimes, when there is nothing running in the background. Of course, hard restart (only power button)

  5. office freeze.not always, but if he gets in the mood, he could go the days where minutes after I start the 'word' it would just freeze. Hard reset again.

  6. "atikmpag' blue screen. After not having it for a long time, I started just have it again.

  7 power supply and battery issues:

  7.1 with battery:
  Suddenly load stops. disconnect and reconnect do not help.
  Fresh only when the computer is turned off.

  7.2 without battery:
  Instant stop. Usually when you use Chrome.

  These issues are alternating, everyday sense I get something else, without a prescription for them that I noticed.

  * How to try to remedy: *.
  1. updated all the drivers for the toshiba page.
  [Page drivers Toshiba | http://www.toshiba.co.il/innovation/download_drivers_bios.jsp]

  2. update the BIOS. I do this cotton after having feeding problems, not so useful.

  3. formatting and reinsalled Windows 7 to factory settings.

  I am sure that there is a solution out there, the computer itself works fine for me (when it works) and I will not buy a new one, until it falls dead (I could give a year or two).

  Are you guys famliar with these questions?

  Here are the proven solutions for this model?

  Post edited by: fish85

  > 1. Wireless adapter goes dead, no help of the troubleshooter in windows. Only restart help to, rarely he demans restart another.

  WLan problems could appear for different reasons. I don t think that it is a WLan driver problem. I think that you should just check the WiFi configuration.
  For example, you should check whether changing the WiFi 1-11 channel would improve performance. Also change the settings for encryption (WPA/WP2-AES, TKIP) is worth trying.
  Turn off all the settings for the WLan to save energy and check if there is a difference if you turn off the WLan mouse.

  > 2. Cannot read USB (IE external HARD disk). allows you to restart.
  Also the issue of USB can be related to energy saving settings.
  In the Device Manager-> USB Controllers-> properties-> tab power management option that allows the system to power off the device to save power.

  > blue screen "atikmpag. After not having it for a long time, I started just have it again.
  This file/process is tied to the ATI graphics card. Try to use the latest graphics card driver. An update is recommended in this case.

  Battery issues:
  Well, sooner or later each battery must be replaced. I put t know if your battery is malfunctioning but probably new battery would help to resolve the issue
  In addition, to remove and uninstall the device control method battery Microsoft acpi located in Device Manager.

• Satellite Pro L850-1 p 7 - wireless LAN problems

  I recently bought a L850 Pro Satellite 1 p 7 and led to a new installation on Windows 7 (64-bit)

  After the new installation, I manually installed the driver for the network card, I then shot all windows updates.

  In Device Manager, I noticed that it lacks a few downloaded drivers so a load of drivers who have resolved most of the issues.

  I don't have one that is still yellow, it's for network controller.

  My one question is with wireless network.

  I tried to install several drivers, but cannot get the wireless network card to show in the settings of the card.

  I can see a bit of reading I have a wireless / Atheros Bluetooth combo.

  Reading some other threads that I downloaded the value added package, the package of Atheros Bluetooth and Bluetooth stack filter. After that I turn on Bluetooth with F12 function key, it warns me about issues with Bluetooth and wireless on at the same time.

  I also noticed that windows tells me there is a problem with the Bluetooth software and am trying to get download and install driver_bluetooth_TC00131900C

  This does not seem to fix anything.

  Has anyone else had this problem and the fix is? I really need to get my wireless working...

  See you soon
  Dave

  Hello

  You are right, that the Satellite Pro L850-1 p 7 was equipped with the WLan ATHEROS 802.11 A/G/N WB222 card, which also supports Bluetooth.

  > Reading some other threads that I downloaded the value added package, the package of Atheros Bluetooth and Bluetooth stack filter.
  It is almost correct. But you forgot to install the Atheros WLan driver.
  You must first install the Atheros WLan driver then the filter package Atheros Bluetooth and battery Bluetooth.

  This should be the key ;)

• HP Pavilion 15 laptop: compatible wireless cards

  I am trying to find out what wireless cards are on my list of white laptops, model No.: 15-e000sa, I want to upgrade if possible. also could you tell me if I am able to update with more ram fast ddr3 1866 or would it just be underclocked to 1600

  Thank you very much

  Hi @slapdash2201

  Welcome to the Forums of HP Support!

  To answer your questions on compatible wireless cards and memory, I included the maintenance manual:

  HP Pavilion 15 Notebook PC Maintenance and Service Guide

  Specifications: channel support double DDR3L (1600 MHz), so it is likely that it would just be less quick.

  And what follows is listed as of the supported WIFI adapters:

  MediaTek MT7630E 802.11bgn Wi - Fi adapter and adapter Mediatek Bluetooth4.0
  Atheros 802.11b/g/n WiFi AR9485 adapt
  WiFi 802.11b/g/n 1 × 1 Ralink RT3290LE and adapter Combo Bluetooth 4.0
  Realtek RTL8188EE 802.11bgn Wi - Fi adapter

  This doesn't mean you can't try something else, as long as it is compatible in size, but it would mean HP don't would not have custom drivers for it, and so there is no guarantee that it would work.

  I hope this helps.