Questions about Flipout contacts

Similar Questions

• Legal questions about obsolete Contacts

  A few scenarios:

  
  

  • We have received business cards for more than a year at an event
  • For more than a year, we bought a list of contacts
  • We have someone in our database which has not been engaged with us in over a year

  Issues related to the:

  
  

  1. We are allowed to communicate with them once asking them to update their profile?
  2. We are allowed to communicate with them once again to offer you a piece of content?
  3. We are allowed to communicate with them to invite them to a Webinar?
  4. We are allowed to put them on a monthly newsletter of high level?
  5. If they do not respond (IE do not open) the first email we send them, we are allowed to communicate with them once more?

  It is one of those issues that the answer should be simple, but is rarely in an organization.

  Here is the answer I would give:

  If you are allowed to send to them, you could go to them. Otherwise his spam. I had this debate on the permision and spam countless times, and if you live in a 'gray State' on your policy, you will constantly have this discussion as he invites ambiguity and a atmosphere of laissez faire. The test for spam is easy (it comes to our guidelines):

  1. unsolicited. The recipient give you verifiable permission to communicate with them? If the answer is no, then you have no permission to send it to them.

  2 you're sending in bulk content? Bulk is a message sent as part of the large collection e-mail, all having substantively identical content

  What people often forget, is that the ability to send to a contact is a matter of consent, not a question of content. If you are allowed to send to them, it doesn't matter what content you send. The problem is that in companies were not in line with verifiable permission, so now you're stuck in a quagmire. A lot of contacts, little verifiable.

  I know that your question was not authorized in particular, so I'll stop here. Suppose you have verifiable permission to send to them:

  1. they are dead, and they are most likely bad. Average the change to a database used about 25% more than a year. We have seen increase of 30% + lately. Not more than 5% spend the effort at the bottom of your database.

  2. because they are dead, you can't kill him twice, so have a go and go to them. We launched reactivation campaigns in the past and we found decent return. We asked to be updated their profile

  Here is an email from the example that we sent in the past:

  Dear colleague,

  We update our contacts and our records indicate that you already expressed their interest to receive information from {your company name}. We appreciate your time and your privacy and would like your permission to send you information by e-mail. To help us better understand your needs and interests, we invite you to manage your communication preferences by clicking on 'Yes' below. Manage your preferences allows you to stay up-to-date with the information that is right for you - notes application to seminars and the best practices in the sector.

  Update your interest takes a simple click and you can change your areas of interest at any time. We hope to continue to provide you with timely and relevant information.

  Sincerely,

  The {your company name} team

  Yes, I would like to receive emails from {your company name} and want to update my preferences

  No, I do not wish to receive emails from {your company name} in the future

• Person to contact with questions about the presentation of the app world

  If I have a question about the app that I submitted, anyone knows how do I contact someone about this? I can't find anything on the site and respond to notification emails gets me nowhere.

  Hey miss breeder,.

  that will be tough. If you browse the App World his hell out there because of the new development forums and people have a lot of problems with it. I've read people were emailing RIM all week and no responses were received. But if you post a question here MShom (one of the moderators) usually responds in a timely. The support email is [email protected] I believe. Good luck!

• Questions about Stor.e TV +.

  Does anyone have a contact point to raise a complaint about the lack of service from Toshiba? I spent £160 on a TV + Stor.e and did have some problems with it, as you can see from the few posts that I raised. After spending £160 on a point I don't understand why if the forum is the only option to support what he is no Toshiba engineers on this issue, who are able to answer my questions. I do not expect a 24 / 7 hotline for £160 I spent, but it would be good to know that a Toshiba engineer could answer my questions about their products. Especially since it's the second one I had which suffers from a cosmetic defect, I had to stick to feet about it as the Unit came with 4 pads ride around the box. I also have my doubts about the HDMI because it seems to be very sensitive to any movement in the area, causing the connection to remove.

  I got a Western Digital box media for more than five years and had no problem with this, the only reason why I changed, it was to make use of the connection to the local network, the HDMI connection and the fact it supported more than file formats. FSR this device was abit of a disappointment for me. So if someone could point me in the right direction, I would be very grateful.

  Hello

  I can understand that you are not happy with the current situation and usually if you buy a product it should properly expect and do no problem.

  As you probably already seen here it s a user to only user forum. This means that you can speak with normal people like you and me and there is no official support from Toshiba.

  In your case, it would be best if you contact an authorized service provider or call the Toshiba UK. The phone number, you can find on the site of Toshiba UK Web:
  http://UK.computers.Toshiba-Europe.com

  Just give the guy a call and explain your situation. I'm sure they can give you a detailed answer and if your TV Stor.e + must be repaired or not. When warranty hardware repair is free.

  I hope I could help you a little bit :)

• Questions about an average of response spectrum and frequency of feeding mode.

  Hello

  I have a few questions about an average of mode. When I generate a sinusoidal signal from one output to two input channels channel to see if my DAQ card works well and vector averaged in the power spectrum for DFT, the amplitudes was different from the previous one of the amplitude, which was supposed to be 1 v peak. They range from 0.5 v to 0.6 v peak. When the calculation of the average model is RMS, the amplitudes were close to 1. I wonder what are the fomulas of RMS and average vector. Does that mean that I could not accurate if I use an average of vector? In a time of frequency response, why I coherences of difference and the amplitudes using the vector and the mean quadratic value?

  Thank you

  Ningyu

  rico1985,

  The differences in modes of generation are as they sound: 1 sample output only a sample writing, N samples will be released however many samples configure you for each entry, and the continuous samples released samples continuously until a specified user action happens (you press the stop button or a logic that you created gets fulfulled). The range of Signal output allows you to set a ceiling high and low level of your output signal and it only affects the quality keeping in this beach. Timing to set a deadline for the time between the acquisition of the sample. If a new sample becomes unavailable before the timeout setting, you will get an error. This is useful for looking at a network, because if the network goes down and you stop getting data from a machine and then you would like to know about it. I point you to those videos that are short tutorials on how to make the most of these actions in SignalExpress.The SignalExpress 3.0 Help file is also your first point of contact for all your questions on getting started. These two resources should get you up and running in SignalExpress in no time. (either by the way all your questions answered using these resources) Bravo!

• Ask questions about the HP Pavilion 14-V041TX Bluetooth

  Hello, sry for asking questions about simple things.

  How to activate bluetooth for laptop HP Pavlion 14-V041TX?

  Or how to bluetooth to detect other bluetooth devices?

  coz already try to use my smartphone, but cannot detect any bluetooth device or laptop.

  for what I know, I already install the driver for bluetooth.

  Maybe there's another driver, that I'm missing?

  Thank you.

  SRY for my bad English.

  HI @Ton1_qrenz ,

  Welcome to the HP Forums!

  It's a great place to find answers.

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  No worries about your English.  I believe that I understand your question, and if not, you can specify if you must post back.

  I understand that you are unable to detect Bluetooth devices.

  Here is a document to help you with this company. There are links that it contains other documents that can also be of assistance.

  Understand and troubleshoot Bluetooth wireless technology (8.1 Windows, 8, 7, Vista, XP)

  If the problem persists, try the following steps.

  Step 1. Go to Device Manager
  Step 2. Right click on "Bluetooth device" you want
  Step 3. Select "update driver software... »
  Step 4. Choose "Browse my computer for driver software".
  Step 5. Choose "Let Me pick from a list of drivers for devices on my computer.
  Step 6. Select "Ports (COM & LPT)"
  Step 7. Select "Microsoft" to the list of "manufacturers".
  Step 8. Finally select "Standard series via a Bluetooth connection.

  If you are unable to connect to a Bluetooth device, try the following:

  Step 1. Search for 'Change device' in the start menu in Windows 8.
  Step 2. Click on where it says change device installation settings.
  Step 3. Select No, let me choose what to do option.
  Step 4. Check the automatically get the device app option
  Step 5. Click on save changes to save the settings that you select

  So, you can try this

  Step 1: Go to RUN (Windows Logo + R) and type "services.msc" and Enter
  Step 2: Now find 'Bluetooth Support Service' and double click it
  Step 3: Now click on the Log on tab and type "Local Service" without the quotes
  Step 4. Click on "account".
  Step 5: Now remove any authorization of passwords the password field blank
  Step 6: Below the upper left title should be a hyperlink 'Start' click

  You can also view tab management power and unchecked the box "Allow the computer to turn off this device to save power."

  If it is still not resolved, I suggest contacting HP support for further assistance.

  Please contact our technical support at the 800-474-6836. If you are outside the United States / Canada region, please click the link below to get help from your region number. Phone goes everywhere in the world

  Good luck!

• Mouse Microsoft bluetooth arc (grey), questions about the reconnection

  Hi all

  I recently bought mouse arc Microsoft Bluetooth (new ERM one) to use with mobile society.

  I have a Lenovo T430s laptop, with windows 7 Professional.

  I have properly matched and works very well, however, when I turn off the mouse, when I turn on the PC, when you turn things on (working from that day is), mouse work / connect.

  IV ' e to manually remove the device and coupled again, then it works fine.

  You have no work around? Bluetooth is 4.0

  Thank you

  Carlo

  Hello
  Welcome to the Microsoft community. Sorry for the delay in responding.

  If you bought this Arc Touch Bluetooth mouse then I would like to inform you that it is perhaps not compatible with Windows 7 because it uses Bluetooth 4.0 technology. This could lead do not save the settings of the mouse and you will have to reconfigure again.

  How to check your device to see if it'sBluetooth active 4.0

  Additional information:
  Troubleshooting: mouse

  How to contact Microsoft if you have questions about your hardware device.

  Hope the information is helpful and let us know if you need additional information. We will be happy to help you.

• Question about Dell OEM: SLP Windows 7 Installation disk domestic; can it be installed and activated on other computers from Dell?

  I bought a Dell installation disk and I want to use it to install a better version of Windows on my Dell PC. I have windows Vista and I want to use it to update my OS Windows7 Home Premium. However, the license type is SLP:OEM and no detail... not sure what SLP: OEM means... I thought that the OS discs are the same. Someone told me no retail editions are not suitable for a new OS, but I'm confused. The disc says, Windows 7 Home premium 64-bit, but didn't holograms who have all MS OS disks and the disk is labeled for use with a Dell system only, if the means it will work very well on my Dell PC? The label does not which brand or model this disc is for, but said only for the Dell PC which is my PC. I'm assuming, the disk won't work on all Dells, maybe someone can offer suggestions, any help is much appreciated. Thank you!

  I have a few other questions about Windows 7, can I ask you about this on your Web site? Do not know how to contact you on your website. I can see other people responding to your articles, but that's all. I thought that maybe their might be a forum to post a question... Thank you for everything.

  You can comment on my site but comments will be public and it is easier to answer questions in the forums.

  If you want to be more precise, you can post in the Dell Community Forums. :

  http://en.community.Dell.com/support-forums/software-OS/

  There are also ways to private message me there is something I don't think that can be done by non-moderateurs on Microsoft Answers. However, I prefer answering questions on the forum:

  http://en.community.Dell.com/members/natakuc4

  Concerning the compatibility with Windows 7, I have listed a full pilot system here compliment:

  http://dellwindowsreinstallationguide.com/driver-sets/Inspiron-desktops/Inspiron-518-Windows-7-64-bit/

  Theres nothing to worry about your circuit board, the only driver who can break your system's BIOS update. I only list the last official update BIOS list Dell in my unofficial driver sets.

  The webcam should be covered by Dell Webcam Central but what is the monitor?

  http://ftp.Dell.com/Monitors/Dell_SX2210-Monitor_Webcam%20SW%20RC1.1_%20R230103.exe

  The main difficulty is to get a genuine product key Windows 7 64 bit. The time now it's easier to buy the 64-bit Windows 8.1. No matter if you buy Windows 7 or 8.1 64-bit both going to Windows 10 free when the RTM is out.

• Questions about syncing wireless keyboard and mouse 5000?

  How can I sync my old 5000 for a new mouse 5000 keyboard and the receiver?

  Hello Eamon,

  Welcome to the Microsoft Community Forum.

  According to the description, I understand that you are facing problem when connecting the new Microsoft mouse USB dongle receiver with the old keyboard Microsoft Wireless 5000.

  I suggest you to contact the Microsoft Hardware support for assistance.

  How to contact Microsoft if you have questions about your hardware device.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• Windows 7 starts questions about mac and office 2010 following an installation

  It's a long cut as short as vent. I've been miss sold a record of upgrade of windows 8 full disk-shaped, with norton and office 2010. My goal of creating windows on my mac for a course I'm taking. After that know I need windows 7, I bought it online. I created a partition of 80g on my mac charge windows 7, then norton. Until I loaded the office that I was invited to perform the update from apple in the windows software 7. Note before I installed norton, I load boot camp mac utilities according to the instructions. So, followed by all as should be. The prompt update from apple was quick time, iTunes and airport, I checked all and then updated. Then I loaded office 2010 and obtained throughout the process from the Microsoft site. On the last part of the installation, the installation failed due to a mistake of hanging iTunes. I tried again and again, I fixed the update to iTunes to add and remove the section of windows. Then, I got different errors. I decided to remove the whole score without uninstalling all programs again. When I get to the windows live, that this falls priming. I get various error messages whenever I try to start the process. As a header of Bank pool, fatal error and so on. Can anyone help? What is the damage?

  Hello

  Thanks for posting your query in Microsoft Community.

  Because the question is limited to Windows 7 on your Mac with Boot Camp, I suggest you contact Apple Boot Camp support for assistance.

  http://www.Apple.com/support/Bootcamp/

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• question about the Microsoft gift card account

  Original title - Microsoft Store

  I have a question about the Microsoft gift card account, if I use my ms points and it is not enough to cover the whole price and I used my paypal, why I am charged for all for a game and there is no deduction for my ms points. IM under the impression that the difference between the points and the game is the only accused to my paypal. But I was charged for everything.

  Hi Marlon Mesa,.

  Thanks for posting your question in the Microsoft Community.

  I'm sorry to know that you are facing this problem.

  You may need to contact the Store Support team for further assistance on this issue.

  Sales and support: http://www.microsoftstore.com/store/msin/en_GB/DisplayHelpContactUsPage/

  Keep us in the loop to help you further.

• Questions about the management of specific nodes in different hierarchies

  Hi all

  I have a question about the specific management of some particular set nodes, which are located in different hierarchies within a same version.

  I want to know if there is any editing made to certain properties of these specific nodes or if the nodes are deleted/moved/edited approval to be triggered for the data manager.

  or should not allow users to edit (adding/moving/deleting/changing property values) or those specific members.

  
  

  According to my understanding of the nodes of domain prevents the removal of nodes, but I don't want my Member prefix/suffix, domain is the only way to prevent the change.

  
  

  
  

  
  

  Thanks and greetings

  Madhu
  

  We have an obligation to not allow a node to remove or deleted without the approval of the admin, so I created a Boolean property AllowDelete is false, which is substitutable, default and is available only in a category of property Admin, for which most of the users do not have access.  Then, I created a validation of PropRemove with an error message that tells the user to contact a user admin to remove or delete the node.  The admin can change the AllowDelete to true, then can either remove himself or to allow the user to do.

• Question about cloud connectors

  We try to create a cloud to Eloqua connector. I read the CloudConnectorSampleGuide. I have a few questions about the expected data models and models of general implementation.

  Configuration of the connector of the cloud

  • The CC stores the identification information for each configured CC step Eloquya Eloqua?
    • What are the guidelines for the safe password storage? (I can't store the passwords as dirty one-way-hash that I need the password during execution.  The two-way hash gives an illusion of security but is not better than the plaintext).
  • When the CC is configured, where credentials should take place between the 1st and the 2nd screen? (i.e. as a hidden form field, session cookie cookie/etc.)
  • Eloqua warns the CC when a step is deleted?

  Cloud connector performance

  • What is the average number of steps configured Single that manages the CC?
  • Is it possible for a CC to have 1000 s and unique not configured to query?
  • What are the guidelines for scalability when the connector has to travel 1000 steps configured and survey? The CC requires a worker architecture to manage a large number of configured steps?
  • Are there best practices around the CC recovery hangs
    • For example: CC acquires the State waiting for members and moves to the current State. The CC blocks before the end of the stage. What is the approach suggested for

  recovery of the tasks in the current handling during recovery state? (assuming I have multiple instances of CC of the Eloqua poll). Is the connector of cloud supposed to maintain States of WIP to manage recovery correctly?

  Dmitry, once again, it is entirely to the developer.  When you add contacts to a stage, they will be processed in batches.  There is no limit to how much you add, and since they are left to step up to that dealt with by the connector, how long they sit depends on how long your connector takes to do its job.  Expectations, of course the faster you can deal with the best.

• Question about multiple accounts on a single Machine

  Hello

  I have a question about the ability of the creative cloud to be used with multiple users. If we have computers in a lab that are shared machines and each student must buy their own creative cloud for its use. How to set the connection and activation of the account of each student?

  I'm new to creative cloud as well as it has been my understanding as long as its operation...

  Although it is branded as cloud base, the software is downloaded and installed locally

  Students between their Code to activate the application they wish to use...

  This model works if the student is using the software on their own machines, but how does it work if several students with multiple accounts share the same computer?

  If we install the software on the machines for them, is it possible for students to simply enable and disable the software as they go or is this a model that simply does not work.

  Thanks for any help you can provide,

  Hello

  Ask want you many to contact Adobe support for help and information:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

• Questions about support

  Dear community of cloud!

  I have a few questions about the service of adobe support.

  First of all, I would ask which includes the support service. I am also curious about the length of the reaction and the way they treat the problem can occur. Receive problem reports directly into the program I use, or do I have to write a separate message in a service address or Skype etc are decent ways to communicate with them?

  Thanks in advance for your answer!

  Service varies down the line insofar as this support is provided and when/how quickly it is provided.  Some people are very satisfied with the support that they get and others are not.  These user forums are one of the support options and usually you will get a response fairly quickly, and if you provide a detailed problem statement you can usually get a solution.  If a solution is to contact Adobe customer service, there is not much anyone can do here in the forums except to the provide information to contact. To contact Adobe Customer Support...

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )