Questions of ios7 guidance

Similar Questions

• Add VDSwitchVMHost question

  Hello:

  I'm the Automation (via PowerCLI) migration of the guest VM in a cluster running 5.5 to a cluster running 6.0.  I have most of the steps, except that I'm stuck when you run the "Add-VDSwitchVMHost".  I get the following error:

  

  I checked that this host is not already added to VDSwitch.  Is there something I'm missing?  Here are the steps that are performed in my script before attempting to add the destination host VDSwitch:

  # 1: To connect to the server source VI (result: success)

  # 2: Collect information of VLAN Server source VI using the command "Get-NetworkAdapter" (result: success( )

  # 3: Host of the place in a "Disconnected" on the server source VI state (result: success)

  # 4: Disconnect from the server source VI (result: success)

  # 5: Connect to the destination VI Server (result: success)

  # 6: Add the host to the destination VI Server (result: success)

  # 7: Add a host to VDSwitch using this exact syntax (result: failed)

  - Add-VDSwitchVMHost-VDSwitch sshvc01vds - VMHost stl - besxhstp11.smrcy.com

  I'm stuck at this point.  The plan is to add virtual machines to their respective networks once I added the host successfully to the destination VI server.  I've been looking online, but I can't find someone who ran in my question.  Any guidance would be greatly appreciated!  Thank you.

  I suspect that the Web Client made the Delete VDSwitchVMHost for you behind the covers.

  We have confirmed that by running the Web Client action through the Web Client Onyx, which would show the methods are called.

  But it does not work when you perform the Deletion-VDSwitchVMHost before your remove the node ESXi cluster?

• HP Envy Rove 8.1 - when the monitor sleeps, it cannot be restored

  I recently started having a new problem where the monitor on my all in a touchscreen Envy Wick not wake up after sleeping. To the best of my knowledge, the computer turns on and seems to work, but the screen is still asleep. By pressing the power button, move the mouse or press the keyboard keys seem to wake up the monitor. When I hard shut down the computer by pressing the power button and then restart the system, everything starts fine. It has been improved for Win8 to 8.1, but I don't think it's when the issue began.

  I've been reviewing several similar problems, but none seem to reflect this specific question. Any guidance would be appreciated.

  SOLUTION:

   

  Open BIOS (at first press ESC, press f10).

  F9 for default of restor

   

  Then save and exit (press f10, once again)

  Restart the computer.

  Doing this again and set it back on "Enable" that can help the computer wil not fire.

  And now your ROVE will start and sleep properly.

• HP Envy Rove, Win8.1 - the PC capacity, once the monitor cannot be revived without forced stop

  I recently started having a new problem where the monitor on my Touchscreen Rove will not wake up after sleeping. To the best of my knowledge, the computer turns on and seems to work, but the screen is still asleep. By pressing the power button, move the mouse or press the keyboard keys seem to wake up the monitor. When I hard shut down the computer by pressing the power button and then restart the system, everything starts fine. It has been improved for Win8 to 8.1, but I don't think it's when the issue began.

  I've been reviewing several similar problems, but none seem to reflect this specific question. Any guidance would be appreciated.

  SOLUTION:

   

  Open BIOS (at startup press ESC and f10).

  F9 for default of restor

   

  Then save and exit (press f10, once again)

  Restart the computer.

• on a kodak printer

  I use my HP Envy 23 all-in-one, running windows 8.1, 64 bit on this site and I am trying to print on my printer Kodak ESP 7.  When I try to print a response to a question that gives guidance, etc. the impression that comes out is in Russian or Cyrillic or any other oriental language.  Can you tell me what is the problem?  I have no idea how to solve this problem.

  Hello

  Welcome to the HP support forum. Probably you need driver for it. Please visit the following site:

  http://support.en.kodak.com/app/answers/list/c/890/selected/true

  (I can't work on the type and model of your Kodak printer).

  Kind regards.

• Third time trying to update my Flash Player?

  I have a MacBook Pro that runs on the Mavericks software and uses Adobe Flash Player.

  Initially, I got a message saying that my Adobe Flashplayer is obsolete.  In response, I tried to download the most recent version that was downloaded about 30% of the way and would not go further.  After several attempts, I took my computer in a store of support tech to my house, just to know that it wasn't my computer, this is the latest version of Adobe flash player which is apparently "broken."  Professionals from the tech support shop gave me a link to substitute the new flash player and install an older version, allowing me to watch videos again.  However, the same problem reappeared and I took my computer in the same shop in the hope of finding a permanent solution.  Today, I received the error message once again tried to install the new update and failed once again. This is my THIRD time meet the error message.  I tried to contact support Adobe several times and am disappointed that it is almost impossible to talk to someone of my question.  New guidance is appreciated, because I'm tired of exhausting my bank account tries to solve the problem on my own.

  Thanks in advance to anyone who can help you.

  Hello

  Apple has blocked the old versions of the player.  If you install older versions, you'll get the same experience.  Please try the installation off line/standalone program displayed at the bottom of this page, http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.html.

  --

  Maria

• ios7 App - Question & Answer App

  Hello

  Looking for some initial guidance on the creation of a new application for who asks questions and provides a response to possibly bring a response.

  -Can it be created in Flex/Flash?

  -Is it is a solution of XCode 5 more?

  Thanks in advance.

  MD

  Unfortunately I have not the time to guide you. Your description is vague, but it sounds a bit like a quiz, Googling quiz apps could be useful. I did the systems that are probably similar to what you seem to want, using Flash and XML files for content issues.

  I create a bunch of stuff Flash for iPad these days and would be most likely to use Xcode/Flash/HTML as Flex. All this 'depends '.

  I don't know what you are is the level of experience, but at least first thing in the storyboard and decide how the questions will be stored and how the thing will work in General before picking technology. I suspect that your experience is low in front end technologies, if you even need to ask the question.

  Most of my work these days is implementing the storyboard tables provided by my client.

• A whole bunch of questions of FileVault

  I say 'heap' because I imagine that there are more implicit questions here I have the knowledge to ask directly. These are questions that occur to a user technical and casual. My hope is that, responded well, they will help others better understand these systems and benefit from. If the answers are in the Help Mac or OS X user Guides, they are opaque to my reading.

  I need more guidance and specifications about the use of FileVault for a typical house with a single user desktop.

  For example:

  (1) is FileVault the contents of my hard drive unreadable to hackers who could access through malicious software?

  (2) if I am connected to my computer, FileVault protects the content of near people who might have the expertise necessary to break my account via bluetooth or wireless or bluetooth devices?

  (3) FileVault does the content of my unreadable disk as CrashPlan online backup services? Encryption the same from a backup disk with a bootable copy of my hard drive with software such as SuperDuper will work?

  (4) how FileVault does not affect files such as Photos or those created with something like Pages when they are stored in iCloud?

  (5) FileVault has any effect on files and programs on my iMac, phone and iPad?

  I ask these questions because I'd like to think that I could store a list of accounts with their passwords on my computer - not to mention other files that I prefer to think as safe - for easy access and editing, but I don't know enough about the security of my computer when it is connected to the internet connected logged in/out, asleep or in use, etc., to move forward. So, I continue to laboriously keep a long list of accounts and their passwords to date on paper. When the instructions and the appropriate parameters are written for software such as FileVault, I need the authors to anticipate these questions of non-technical, occasional users and to provide more details. Thanks for listening.

  1 physical access, yes it is protected. Maybe the malware... I don't know how well it would hold against Ransomware.

  2. does not like that... If your wifi is WPA2-AES encrypted with a long password (10 characters or more), you're pretty well off.
  Bluetooth/Wifi is not some pipes of insecurity leaking data to the computer, it can be used to transfer files when it is configured correctly, but the range is so short and limited bandwidth is not really a medium easy/fast to hack into a computer. Clear it if you do not use, it goes the same for wifi, you can still use ethernet connected instead.

  3. I don't know, maybe? -Contact Crashplan and see.

  4. I guess they are encrypted locally on the computer.
  5. probably not, works of ecosystem Apple pretty much any type of encryption is running,

  To answer your question in its entirety, everything you really need a password manager - 1Password, KeyPass Dashlane, IronKey, etc. do some research and see what is best for you.

  Insofar as keep your Mac, safe, simple is the best.

  Do not open attachments from unknown/no unsolicited senders.

  Do not install MacKeeper (or anything else as a mac program speed)

  Don't fall for the ads or the support system sites indicating that your computer has a virus, call 888-FixNow! (Support tech crook)

• photostream ios7 not synchronized with ios9 icloud photo library?

  The title of my post is actually also my question.

  I have an iPad2/iOS7x. Not wanting to update since I saw that another older I became practically useless when I updated to iOS8, then iOS9.

  I used services iCloud and Photostream on it - everything is normally backed to the cloud with no problems.

  I recently bought an iPhone6/iOS9. While I was setting this up I was asked if I wanted to move to iCloud photo library. I did, but now I realized that:

  1 iPad2/iOS7 photos does not synchronize on iPhone6

  2 iPad2/iOS7 photos appear not anywhere in the pictures on www.icloud.com application

  3 iPhone6/iOS9 photos does not sync on iPad 2/iOS7

  So my question is: are these two versions iOS7 incompatible iOS9 about the timing of the photo?

  Hi love,

  I understand that you have some question about iCloud photo library and Photo streams. Let's see if we can clarify this.

  The extent of iCloud photo library, yes iOS 7 is not compatible. Your devices will have to be at least 8.3 iOS to see all of your library or upgrade to iOS 9 on all your devices. Now, you can still have my stream of photos or iCloud, sharing photos to go to iOS devices 7, but you wouldn't have the entire library, like on iOS devices 9. Take a glance at the article below for details on what the requirements are for iCloud will go.

  Requirements for iCloud
  https://support.Apple.com/en-us/HT204230

  Let me know if you have other questions about it.

  Take it easy

• 6500 a ios7 AirPrint

  Hello

  I have an OfficeJet 6500 (E710N-z) a, which says that the HP support site must be compatible and able to print via AirPrint.

  However, since a couple of weeks back, the printer no longer shows according to availability. We have several features of IOS7, and we are no longer able to print to the printer from any one of them.

  I have a ping utility on my ipad, and I can't ping the printer by its IP address. And yet I have not all available printers when I try to 'select printer'.

  I downloaded HP ePrint app, also the Print utility and remote AiO, and none of these applications are able to locate the printer either.

  I hope that someone in the forum can help me, please.

  Kind regards

  Sloan4

  Hi Sloan4,

  Try restarting your router by unplugging for 30 seconds, then turn it on and wait a minute or two.

  Turn the printer off and back on, then check all difference.

  For any question, please let me know your routerbrand and your model, so make sure that the printer has the latest firmware installed:

  http://support.HP.com/us-en/document/c02830943

  Kind regards

  Shlomi

• HP ENVY Notebook PC m6: HP ENVY Notebook PC Windows 10 - neck of simple questions m6

  The evening

  HP ENVY laptop PC_v 6.0.100.272 m6

  Since the upgrade to Windows 10 SimplePass was extremely hit and Miss.  On the odd occasion, it works fine, but most of the time this isn't...

  I reinstalled Pass Simple, also tried the repair software function, but also ensure that Windows journal is checked.  I'm running out of ideas!

  Current issues:

  Windows Journal-does not work.

  Website Log - I drag the player and get the following message "Pause verification of fingerprints.

  HP Simple Pass App - same error message as above

  Appreciate advice and guidance...

  Thank you

  Tim

  Hi @T_LONG,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY laptop m6 and have them with software for Windows 10 fingerprint reader. Here is a download for the reader of fingerprints for Windows 10. This download sp71729.exe should work for you. I would like to uninstall the version you have and reinstall this version.

  You may need to check that the Simplepass is enable biometric support .

  Please let me know how it goes.
  
  You can say thanks for trying to help by clicking on the Thumbs Up below!
  
  Thank you.

• Add Question worksheets

  Therefore, the code that I have which is currently recording a table of data generated by my program to an excel file. It then saves and closes excel.

  

  Below, I have just to generate a path of the file to save to. So my question is, really, that I also three other graphs generated in adition to this table. How and where can I add in the code for these other graphs?

  I'm looking for but that you have not seen much in the way to add more sheets of calculation in a workbook created. Any guidance or examples would be appreciated! Thank you!!

  Hello Sundown,

  To answer your first question: you do not have to close references to the beach and worsheet before adding another, but if you decide not to close the references you need to keep track of each of them in a table and close at the end, otherwise you will have references that are not closed at the end of your program. The best way to implement this is to put some of your code in a loop and close the references in the loop. Property node of your sheets has an index entry, and that specifies what worksheet, you get a reference to.

  If you put a loop around everything from the property node of the leaves that you write data (the node property of range), you can open references to each of the worksheets and write on each one. Move them close reference screw inside the loop so that you close the reference to your specific worksheet and your range during each loop.

  The loop runs four times (once for each table and each workbook) and you can wire two paintings of automatic indexation in it, a picture of the worksheets that you want to put the data in (for example, {1,2,3,4}) and a second table, which is an array of four dashboards that you write for spreadsheets.

  I hope that helps, if you find it confusing, please let me know and I can try to do a small example for you image show what I mean.

• Newbie BB development question

  Hello eveyone. I hope this is the right place to post this question, but I'm looking for advice. I'm new to the development for BB, but since 3 days I did a lot of reading. The only problem with this is that the more I read more confused I get. I have developed solutions ASP.NET, but never anything like that for mobile devices.

  Here are my thoughts on what I would do:

  -Create a Web page for the BB, which goes to a SQL Server, accessing a view and extracts the data in a data Repeater or a gridview for viewing.

  I have an IIS server running locally and can be viewed on BlackBerry now. I've set up and you can check out. WML and. Pages HTML to it very well.

  My question is this. I read about this plug-in for Visual Studio 2008. I downloaded and installed successfully.

  I do not know the following:

  -Can I do what I would do without BES?

  -What would be the best way to go about this? A few suggestions on what would be the best way to approach this project.

  Any guidance would be greatly appreciated.

  Thanks in advance,

  Bob

  psu99 wrote:

  So I can just use Visual Studio.net 2008 and create a sample page. I use the PlugIn which can be downloaded or can I just without programming?

  From what you say, you just need Notepad, vim, emacs, any other to design a Web page. The fact that You ' l browse this page with a Blackberry or an iPhone or a Samsung is on top of that.

  psu99 wrote:

  And what you say to me that I didn't need BES... my point of view on what it was only used for PUSH applications.

  You use a BES is required if the Web server is not reachable from outside your corporate network. In this case, you need BES just for its web proxy that will allow your browser to reach a machine inside the LAN. BES can also be used for automatic authentication issues based on the PIN code of your device and/or X.509 private keys that can be installed by the IT company.

• How to contact support? (Questions about the presentation + Playbook offers)

  Hello

  I just got an email saying my app "is approved however will have to stay in the"Approved"State until the questions below are corrected."

  On this basis, I have 2 questions:

  Q1: does this mean that I am accepted for the offer of playbook? (I submitted before the deadline and received a previous email on this remind me to sign the app)

  Q2: it says that the problem is that I don't have an icon - "please you check the App icon, it doesn't seem to show when loading on a playbook."- but on my end, when I test everything seems fine. Any ideas why this happens?

  I'd appreciate your comments!

  Thank you

  Suraj-

  Sorry I can't speak on behalf of the App World approval team.  They will provide guidance on your acceptance of the offer of the playbook.

  Regarding your question on the icons, what size and file format you use for your icon?  Make sure it is a PNG 86 x 86 file, otherwise it can not be made on the home screen (can appear invisible if the correct size is used).

• 10 questions with Ant Build QNX BlackBerry + PhoneGap (Córdoba)

  Hello;

  I am experienced in creating applications for the BlackBerry platform and am currently deploy a sample application with PhoneGap (Córdoba) with BlackBerry WebWorks for the BlackBerry 10 Beta (QNX) , without great success. I'm following the instructions in the guide of PhoneGap Getting Started Guide for BlackBerry , linked to their developers blog.

  The sixth step of the guide mentioned above, I get a few questions where theorg.apache.cordova function is not found, as well as all the features of blackberry.* :

  D:\Work\Development\PhoneGap\workspace\sample>ant qnx build
  Buildfile: D:\Work\Development\PhoneGap\workspace\sample\build.xml
  
  qnx:
  
  build:
  
  generate-cod-name:
       [echo] Generated name: cordovaExample.bar
  
  clean:
     [delete] Deleting directory D:\Work\Development\PhoneGap\workspace\sample\build
  
  package-app:
      [mkdir] Created dir: D:\Work\Development\PhoneGap\workspace\sample\build\widget
       [copy] Copying 24 files to D:\Work\Development\PhoneGap\workspace\sample\build\widget
       [copy] Copying 1 file to D:\Work\Development\PhoneGap\workspace\sample\build\widget
       [copy] Copying 1 file to D:\Work\Development\PhoneGap\workspace\sample\www\js
        [zip] Building zip: D:\Work\Development\PhoneGap\workspace\sample\build\cordovaExample.zip
  
  build:
       [exec]
       [exec] D:\Work\Development\PhoneGap\workspace\sample>"C:\Program Files\Research In Motion\BlackBerry 10 WebWorks SDK 1.0.2.9\dependencies\node\node.exe" "C
  :\Program Files\Research In Motion\BlackBerry 10 WebWorks SDK 1.0.2.9\lib\bbwp.js" D:\Work\Development\PhoneGap\workspace\sample\build\cordovaExample.zip -o D:\
  Work\Development\PhoneGap\workspace\sample\build
       [exec] [INFO]    Populating application source
       [exec] [INFO]    Parsing config.xml
       [exec] [WARN]    Build ID set in config.xml [version], but no signing password was provided [-g]. Bar will be unsigned
       [exec] [WARN]    Failed to find feature with id: org.apache.cordova
       [exec] [WARN]    Failed to find feature with id: blackberry.find
       [exec] [WARN]    Failed to find feature with id: blackberry.identity.phone
       [exec] [WARN]    Failed to find feature with id: blackberry.pim.Address
       [exec] [WARN]    Failed to find feature with id: blackberry.pim.Contact
       [exec] [WARN]    Failed to find feature with id: blackberry.io.file
       [exec] [WARN]    Failed to find feature with id: blackberry.utils
       [exec] [WARN]    Failed to find feature with id: blackberry.io.dir
       [exec] [WARN]    Failed to find feature with id: blackberry.app.event
       [exec] [WARN]    Failed to find feature with id: blackberry.system.event
       [exec] [WARN]    Failed to find feature with id: blackberry.widgetcache
       [exec] [WARN]    Failed to find feature with id: blackberry.media.camera
       [exec] [WARN]    Failed to find feature with id: blackberry.media.microphone
       [exec] [INFO]    Generating output files
       [exec] [INFO]    Info: Package created: D:\Work\Development\PhoneGap\workspace\sample\build\simulator\cordovaExample.bar
       [exec] [INFO]    Info: Package created: D:\Work\Development\PhoneGap\workspace\sample\build\device\cordovaExample.bar
       [exec] [INFO]    BAR packaging complete
  
  BUILD SUCCESSFUL
  Total time: 8 seconds
  
  D:\Work\Development\PhoneGap\workspace\sample>
  

  Note that the org.apache.cordova function is not found, as well as all the features of blackberry.* .

  Ignoring the warnings and deployment on the BB10 Simulator results in this error: http://i.imgur.com/aUcPM.png

  It is worth noting that none of the warnings above or the runtime error occurs when you deploy to the PlayBook instead of 10 of BlackBerry.

  It would be appreciated if no guidance can be given to help solve this problem.

  Thank you very much.

  It is fully supported, it uses just a different implementation internally (that's why he needs different compared to the PB and BB7 and below feature identifiers).
  I did remove the org.apache.cordova line because it doesn't cause any damage to my application.
  I think the WebWorks Packer tries to find an org.apache.cordova in the folder SDK WebWorks to copy into the folder bar, while in reality org.apache.cordova already exists in your folder www is also copied in the file bar. (Yet I still think that this line is always necessary to access the API of Cordoba on the device)