Questions regarding the formatting and using 2013 Office on the computer.

Hi all

Currently I have problems with my camera on Windows 8 app (I have an Asus laptop).

The camera does not work and every time I tried to open the app, he says: "CONNECT a camera".

My webcam is not found on the computer. I even downloaded the VitualCamera sent to me by the seller.

The provider said I have to re - format and reset my computer for the app to work.

1. WHAT CAN I DO FOR THE APPLICATION OF CAM TO WORK AGAIN?

2. IF I HAVE TO REFORMAT, I LOSE THE RIGHTS TO MICROSOFT OFFICE PACK 2013, THAT I JUST BOUGHT AND INSTALLED ON MY LAPTOP?

OR CAN IT BE INSTALLED WITH THE ACCESS CODE THAT I HAVE WITH MY PURCHASE?

Thank you very much

(I'm desperate for a solution).

Ayesha

Response to question number 1:

The provider will know best.  But if the camera just recently stopped working, you might be able to fix it using the option #1 on this page, any necessary format.

Answer to question No. 2:

However, if a formula is really needed, you will still be able to re - install Office 2013 by using the source code for your purchase. This code is yours forever, and you can use it as many times as you need, even if you get a new computer (but you can use the code on a single computer at a time, so you should first remove it from your old computer).

Tags: Windows

Similar Questions

  • Yes, another question regarding the freezing of Safari - EtreCheck report included

    Yes, another question regarding the freezing of Safari.

    From a little over a month (I think), Safari started freezing regularly whenever I want to open new tabs or switch between tabs. I found myself to leave the program several times per day / hour. I can't identify any specific common cause (other than my MacBook being old) or any new software or updates that might have initiated the question. At first I thought he might have many tabs, I tried to open, but recently it happens even with only a few tabs open.

    I worked through the steps I found in this forum and others: empty the cache, start in safe mode, etc nothing works.

    Based on the previous suggestions, I have downloaded and run EntreReport which I included below. The note and maybe just a distraction, but EntreReport has crashed three times tonight, before he was able to produce the sub report. I ran the report after restarting my system with no other programs running.

    Suggestions are welcome at this stage because I want to start using Chrome or Firefox because I like the transfer procedure between my devices.

    Thank you in advance.

    Ben

    -----------

    EtreCheck version: 2.9.11 (264)

    Report generated 2016-04-28 22:48:58

    Download EtreCheck from https://etrecheck.com

    Time 05:45

    Performance: Below average

    Click the [Support] links to help with non-Apple products.

    Click [details] for more information on this line.

    Click on the link [check files] help with unknown files.

    Problem: Apps are broken

    Description:

    Safari freeze when opening new tabs / switching between the tabs.

    Hardware Information:

    MacBook Pro (15-inch, mid 2009)

    [Data sheet] - [User Guide] - [warranty & Service]

    MacBook Pro - model: MacBookPro5, 3

    1 2.66 GHz Intel Core 2 Duo CPU: 2 strands

    4 GB of RAM expandable - [Instructions]

    BANK 0/DIMM0

    OK 2 GB DDR3 1067 MHz

    BANK 1/DIMM0

    OK 2 GB DDR3 1067 MHz

    Bluetooth: Old - transfer/Airdrop2 not supported

    Wireless: en1: 802.11 a/b/g/n

    Battery: Health = battery check - Cycle count = 389

    Video information:

    NVIDIA GeForce 9400M - VRAM: 256 MB

    Color LCD 1440 x 900

    NVIDIA GeForce 9600M GT - VRAM: 256 MB

    Software:

    OS X El Capitan 10.11.4 (15E65) - since startup time: less than an hour

    Disc information:

    FUJITSU MJA2320BH FFS G1 disk0: (320,07 GB) (rotation)

    EFI (disk0s1) < not mounted >: 210 MB

    Macintosh HD (disk0s2) /: 319,21 go-go (54,93 free)

    Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

    HL-DT-ST DVD - RW GS23N)

    USB information:

    Built-in ISight from Apple Inc..

    Card reader Apple

    Apple Inc. BRCM2046 hub.

    Apple Inc. Bluetooth USB host controller.

    Apple Inc. Apple keyboard / Trackpad

    Computer, Inc. Apple IR receiver.

    Guardian:

    Mac App Store and identified developers

    Unknown files:

    ~/Library/LaunchAgents/com. GoodShop.updater.plist

    ~/Library/application support/GoodShop/updater

    A unknown file found. [Check files]

    Kernel extensions:

    / Library/Application Support/Symantec/virus

    [no charge] com.symantec.kext.SymAPComm (11.1.2f17 - 2015-05-23) [Support]

    / Library/Extensions

    [no charge] expressvpn.tap (20150118 - 2016-04-12) [Support]

    [loading] expressvpn.tun (20150118 - 2016-04-12) [Support]

    / System/Library/Extensions

    [no charge] com.DYMO.usbprinterclassdriver.kext (1.1 - SDK 10.9-2016-04-12) [Support]

    com.Silex.driver.sxuptp [no charge] (1.5.1 - 2016-04-12) [Support]

    com.symantec.kext.internetSecurity [no charge] (1.3.2 - 2016-04-12) [Support]

    com.Symantec.kext.IPS [no charge] (3.2 - 2016-04-12) [Support]

    Startup items:

    CMA: path: / Library/StartupItems/cma

    RosettaStoneLtdDaemon: Path: / Library/StartupItems/RosettaStoneLtdDaemon

    Startup items are obsolete in OS X Yosemite

    Launch system officers:

    [loaded] 8 tasks Apple

    [loading] 165 tasks Apple

    [operation] 65 tasks Apple

    Launch system demons:

    [loaded] 45 tasks Apple

    [loading] 161 tasks Apple

    [operation] 83 tasks Apple

    Launch officers:

    [no charge] com.adobe.AAM.Updater - 1.0.plist (2016-04-28) [Support]

    [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2015-10-31) [Support]

    [operation] com.epson.Epson_Low_Ink_Reminder.launcher.plist (2015-01-19) [Support]

    [loading] com.epson.esua.launcher.plist (2015-06-29) [Support]

    [operation] com.epson.eventmanager.agent.plist (2014-09-21) [Support]

    [loading] com.google.keystone.agent.plist (2016-03-01) [Support]

    [operation] com.mcafee.menulet.plist (2016-03-23) [Support]

    [operation] com.mcafee.reporter.plist (2016-03-23) [Support]

    [loading] com.oracle.java.Java - Updater.plist (2013-11-14) [Support]

    [operation] com.symantec.uiagent.application.plist (2010-11-16) [Support]

    [operation] com.trusteer.rapport.rapportd.plist (2016-03-19) [Support]

    Launch demons:

    [loading] com.adobe.ARMDC.Communicator.plist (2015-10-31) [Support]

    [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2015-10-31) [Support]

    [loading] com.adobe.fpsaud.plist (2016-04-15) [Support]

    com.DYMO.pnpd.plist [no charge] (2014-10-16) [Support]

    [loading] com.expressvpn.tap.plist (2016-01-27) [Support]

    [loading] com.expressvpn.tun.plist (2016-01-27) [Support]

    [loading] com.google.keystone.daemon.plist (2016-03-01) [Support]

    [loading] com.macpaw.CleanMyMac3.Agent.plist (2016-04-18) [Support]

    [operation] com.mcafee.cspd.plist (2015-05-08) [Support]

    com.mcafee.ssm.ScanFactory.plist [no charge] (2016-03-16) [Support]

    com.mcafee.ssm.ScanManager.plist [no charge] (2016-03-16) [Support]

    [operation] com.mcafee.virusscan.fmpd.plist (2016-03-22) [Support]

    [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

    [loading] com.oracle.java.Helper - Tool.plist (2013-11-14) [Support]

    [loading] com.symantec.MissedTasks.plist (2009-11-10) [Support]

    [loading] com.symantec.Sched501 - 1.plist (2014-08-27) [Support]

    [loading] com.symantec.Sched501 - 4.plist (2015-01-08) [Support]

    [loading] com.symantec.Sched501 - 5.plist (2015-01-08) [Support]

    [loading] com.symantec.avscandaemon.plist (2009-10-10) [Support]

    [operation] com.symantec.diskMountNotify.plist (2009-09-14) [Support]

    [loading] com.symantec.navapd.plist (2009-09-14) [Support]

    [loading] com.symantec.navapdaemonsl.plist (2009-11-14) [Support]

    [operation] com.symantec.sharedsettings.plist (2009-07-22) [Support]

    [operation] com.symantec.symSchedDaemon.plist (2009-11-10) [Support]

    [operation] com.symantec.symdaemon.plist (2009-03-27) [Support]

    [operation] com.trusteer.rooks.rooksd.plist (2016-03-19) [Support]

    User launch officers:

    com [running]. GoodShop.updater.plist (2013-09-24) [Support]

    [loading] com.adobe.AAM.Updater - 1.0.plist (2015-10-25) [Support]

    [failure] com.facebook.videochat. [entrenched passage] .plist (2014-08-09) [Support]

    [loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-04-25) [Support]

    Items in user login:

    iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

    Application of Google Reader (Google Drive.app/Applications /)

    Dropbox application (/ Applications/Dropbox.app)

    ExpressVPN application (/ Applications/ExpressVPN.app)

    CleanMyMac 3 Menu Application (/ Applications/CleanMyMac 4.app/Contents/MacOS/CleanMyMac 3 Menu.app)

    Other applications:

    [ongoing] com.DYMO.pnpd

    [ongoing] com.getdropbox.dropbox.83552

    [ongoing] com.google.GoogleDrive.81632

    [ongoing] com.macpaw.CleanMyMac3.Menu.80672

    [ongoing] com.mcafee.ssm.ScanManager

    [ongoing] com.mcafee.virusscan.ssm.ScanFactory

    [loading] 420 tasks Apple

    [operation] 193 tasks Apple

    Plug-ins Internet:

    o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-16) [Support]

    Default browser: 601 - SDK 10.11 (2016-04-18)

    Flip4Mac WMV Plugin: 2.4.4.2 (2012-12-25) [Support]

    DYMO Safari Addin: Unknown - SDK 10.9 (2014-10-26) [Support]

    AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]

    FlashPlayer - 10.6: 21.0.0.226 - SDK 10.6 (2016-04-25) [Support]

    Silverlight: 5.1.30514.0 - SDK 10.6 (2015-09-16) [Support]

    QuickTime Plugin: 7.7.3 (2016-04-12)

    Flash Player: 21.0.0.226 - SDK 10.6 (2016-04-25) [Support]

    googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]

    iPhotoPhotocast: 7.0 (2010-11-15)

    AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]

    SharePointBrowserPlugin: 14.3.0 - SDK 10.6 (2013-02-09) [Support]

    SiteAdvisor: 2.0 - 10.1 SDK (2015-03-30) [Support]

    JavaAppletPlugin: Java 8 updated 77 03 (2016-04-18) check the version of build

    Safari extensions:

    AdBlock - BetaFish, Inc. - https://getadblock.com (2016-03-30)

    Add to wishlist Amazon - Amazon.com - http://www.amazon.com/wishlist?ref=cm_wl_saf_ext (2011-07-09)

    GoodShop - GOODSEARCH LLC - http://www.GoodSearch.com (2013-09-24)

    SiteAdvisor - McAfee - http://www.siteadvisor.com (2015-09-28)

    PIN button - Pinterest, Inc. - http://www.pinterest.com/ (2015-07-03)

    3rd party preference panes:

    Flash Player (2016-04-15) [Support]

    Flip4Mac WMV (2012-05-15) [Support]

    Growl (2015-09-16) [Support]

    Java (2016-04-18) [Support]

    Norton\nQuickMenu (2010-11-16) [Support]

    Trusteer Endpoint Protection (2016-04-18) [Support]

    Time Machine:

    Time Machine not configured!

    Top of page process CPU:

    5% WindowServer

    1% kernel_task

    0% fontd

    0% SymDaemon

    Top of page process of memory:

    445 MB kernel_task

    Mdworker (18) 430 MB

    164 MB Google Reader

    Dropbox 123 MB

    VShieldScanner (4) 66 MB

    Virtual memory information:

    106 MB free RAM

    4.15 GB used RAM (770 MB cache)

    6 MB used Swap

    Diagnostic information:

    April 28, 2016, 22:42:12 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-224212_[redacted].crash

    com.etresoft.EtreCheck - /Applications/EtreCheck.app/Contents/MacOS/EtreCheck

    28 April 2016, 22:21:42 self-test - spent

    April 28, 2016, 19:49:12 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-194912_[redacted].crash

    April 28, 2016, 19:47:10 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-194710_[redacted].crash

    April 28, 2016, 19:38:58 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-193858_[redacted].crash

    April 28, 2016, 19:04:58 ~/Library/Logs/DiagnosticReports/rapportd_2016-04-28-190458_[redacted].crash

    /Library/rapport/*/rapportd.app/Contents/MacOS/rapportd

    April 28, 2016, 06:06:59 /Library/Logs/DiagnosticReports/Safari_2016-04-28-060659_[redacted].hang

    /Applications/Safari.app/Contents/MacOS/Safari

    April 28, 2016, 12:48:04 AM /Library/Logs/DiagnosticReports/SubmitDiagInfo_2016-04-28-004804_[redacted].cpu _resource.diag [details]

    / System/Library/CoreServices/SubmitDiagInfo

    April 27, 2016, 22:01:10 /Library/Logs/DiagnosticReports/Safari_2016-04-27-220110_[redacted].hang

    April 27, 2016, 21:57:37 /Library/Logs/DiagnosticReports/Safari_2016-04-27-215737_[redacted].hang

    April 27, 2016, 19:05:50 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-27-190550_[redacted].crash

    April 27, 2016, 06:57:28 ~/Library/Logs/DiagnosticReports/Airmail 2_2016-04-27-065728_ .crash [deleted]

    / Applications/Airmail 2.app/Contents/MacOS/Airmail 2

    26 April 2016, 19:48:11 /Library/Logs/DiagnosticReports/Safari_2016-04-26-194811_[redacted].hang

    Remove all apps viruses you have

    Symantec, McAfee, Norton...

    CleanMyMac3

  • A few questions regarding the audit

    Hi all



    Greetings. I have a few questions regarding the audit.


    1. how to enable auditing for create table and truncate table by a user?

    SQL> audit table by schema_name;
    
    Audit succeeded.
    Fact the knowledge of the above: http://psoug.org/reference/auditing.html

    This succeeded. But when I actually created a table, it does not reflect in the dba_audit_trail;


    Do I have to use the number of action by and then combine it with another table to populate the create table/truncate table?


    2. How can I check what all auditing has been activated so far?


    Please suggest me. I am unable to follow the audit to create and truncate.


    Concerning
    KK

    In the above article that I mentioned earlier it said check the dba_audit_trail table.

    COLUMN username FORMAT A10
    COLUMN owner    FORMAT A10
    COLUMN obj_name FORMAT A10
    COLUMN extended_timestamp FORMAT A35
    
    SELECT username,
           extended_timestamp,
           owner,
           obj_name,
           action_name
    FROM   dba_audit_trail
    WHERE  owner = 'AUDIT_TEST'
    ORDER BY timestamp;
    
    USERNAME   EXTENDED_TIMESTAMP                  OWNER      OBJ_NAME   ACTION_NAME
    ---------- ----------------------------------- ---------- ---------- ----------------------------
    AUDIT_TEST 16-FEB-2006 14:16:55.435000 +00:00  AUDIT_TEST TEST_TAB   CREATE TABLE
    AUDIT_TEST 16-FEB-2006 14:16:55.514000 +00:00  AUDIT_TEST TEST_TAB   INSERT
    AUDIT_TEST 16-FEB-2006 14:16:55.545000 +00:00  AUDIT_TEST TEST_TAB   UPDATE
    AUDIT_TEST 16-FEB-2006 14:16:55.592000 +00:00  AUDIT_TEST TEST_TAB   SELECT
    AUDIT_TEST 16-FEB-2006 14:16:55.670000 +00:00  AUDIT_TEST TEST_TAB   DELETE
    AUDIT_TEST 16-FEB-2006 14:17:00.045000 +00:00  AUDIT_TEST TEST_TAB   DROP TABLE
    
    6 rows selected.
    
    SQL>
    

    Have you reviewed this table?

    Alternatively, you can consult the table of dba_stmt_audit_opts.
    DBA_STMT_AUDIT_OPTS

    Published by: Kerri_Robberts on July 15, 2011 15:11

  • XLIFF file format and use with JAVA API

    Hello

    We use BEEP version 5.6.3 in Oracle Applications 11.5.10.2 and we are developing some reports to be translated into 10 different languages. We are therefore very interested in XLIFF files but have some questions about the file format and the use of the JAVA API

    (A) FILE FORMAT
    Accuracy: we generate the XLF file in menu add-on BEEP in Winword MS used to build the RTF model
    (A - 1), the generated XLF file begins with:
    <? XML version = "1.0" encoding = "utf - 8"? >
    Can we change encoding to "ISO-8859-1' as soon as convert us the file format?

    A-2) section he < header > < skl > < file > internal - contains a huge chain that seeem to be binary... What is c? can delete us it?

    A-3) can you have a file XLF muliple < file > sections (one for each language translation)?
    This can be very useful for us to manage a translation only by a report model file.

    A-4) the most important section for translation is included in the tag < trans-unit >.
    Each of them has a separate as id "49e41f8f" '... '. Can we replace that with a larger significance?

    (A - 5) in the format of language is as "en-US" (area code + language code).
    It is case sensitive?

    (* B) THE USE OF XLIFF FILES WITH JAVA APIS *.
    We use the OPE "FOProcessor" class to generate the PDF providing:
    -Data generated by SQL report XML file
    -File XSL - FO, generated from the module BEEP in MS WINWORD RTF model
    -XLIFF file generated from RTF model by the module BEEP in MS WINWORD
    -The XLIFF file contains a file entry to translate the form English to French
    < file source = target language language "en-US" = "en - US" datatype = "OPE" original = "orphan.xlf" product-version = "orphan.xlf" - name of the product ="" > "

    Here is a summary of our java implementation class:

    Processor FOProcessor = new FOProcessor();
    processor.setData (sXmlDataFilepath);
    processor.setTemplate (sXslTemplateFilepath);
    processor.setOutput (sPdfOutputFilepath);
    processor.setOutputFormat (FOProcessor.FORMAT_PDF);
    processor.setLocale ("en - US");
    xInputXlfLang = new FileInputStream (sXlfLangFilepath);
    processor.setXLIFF (xInputXlfLang);
    try {}
    Processor.Generate ();
    }
    {} catch (XDOException e)
    e.printStackTrace ();
    }


    (variables beginning with "s" are path + names passed as arguments)


    The output PDF file is well generated, but not translated in French!

    (1) I missed something?
    What is wrong in my code or my XLIFF file?
    Y at - it a parameter to pass to allow the XLIFF translation (via setConfig)?
    With "setLocale" we indicate the target language, but how BEEP knows this current language is "en-US"?

    I found a few posts on the subject, but none with a clear solution. So if I managed to solve this problem, I think it can be very useful for many developers.

    Thanks in advance for your help.
    K.Helali

    Edited by: K.Helali Apr 26. 2010 01:56

    Hey,.

    I know what you're talking about.

    Do not make the rtf-> xsl in the office.

    Do it in java code.

    Use RTFprocessor, for her, just set the model and set the true extractxliff.

    move the xsl foprocessor.

    to do this

    (1) in the BEEP for MS Word
    1 - a) build the RTF model
    1-c) extract texts translateable to the XLF file

    (2) in BEEP Server (Linux Redhat, BEEP 5.6.3) included with the Oracle Applications 11.5.102
    (2 - a) write a java class that implements class FOProcessor (see code in my first post)
    I'm passing to the FOProcessor class
    -XML data file
    model model XSL - export RTF, file to the XSL using RTFprocessor file save it sub - (here in rtfprocessor.setextractXlifff - true)
    http://download.Oracle.com/docs/CD/E10415_01/doc/bi.1013/e12693/Oracle/Apps/XDO/template/RTFProcessor.html
    -Translation (via the FOProcessor.setXLIFF method) XLF file

  • Question regarding the purchase of laptop wireless

    Everything I've ever owned have been HP desktop computers. I need (well Yes, not desire) to buy a new laptop wireless. My intention to buy staples as I experience such great service in the past. Here are my questions:

    1 at the present time, I have high speed internet, but not wireless. Can I have both wireless and material "no wireless" goes on the same connection?

    2 will I be able to print on my existing (from my wireless laptop) printer if my desktop computer and printer are 'wired '?

    3. when I get out of the store, what do I need in my hands? I live 50 miles away and don't want to go home and find out that I'm missing something.

    I teach online classes will therefore could go 'on-line' no matter where I'm travelling. I guess my wireless connection works in the House of my daughter in Arizona as far as I know their password? As I have not worked with wireless, I am a little confused how it will work.

    I'd appreciate recommendations on routers and laptop computers, if you have a preference. I'll use camtasia in my class so will need microphone and camera possible.

    In advance thanks.

    Padraig

    1. Yes. This is called a hybrid network. With a wireless router that comes with LAN ports (4) which is easy to do. I use a Netgear WNR834B 802.11n router that has a LAN port. Easy to set up.

    (2) you will need to set up a simple home network and share the printer on the network from thePC to which it is connected. You can also install a print server connected to your network and it will have its own network address and be available for all the PCs on your network.

    (3) you need a wireless router (my preference is Netgear 802.11n because of the reliability, range and throughput of 300 kbs).

    I have exxplained the answers to your questions only in simple terms. I have no idea what your level of knowledge is in terms of networking (i.e. the subnets)

    My home network is a cable modem which is connected to netgear powerline devices (2)

    (via a CAT5 cable) which uses the wiring domestic (115 v) to provide an internet connection to my wireless router that offers a wireless for my laptop and a second office. My server at home and the box of FreeNAS are connected to the network via the router's LAN ports using a CAT5 cable

    .

  • Questions regarding the installation of key code

    I was helping a friend with his computer. She bought a computer to measure with Widows XP installed on it, a store of the local computer, about three months ago. She got big virus on his computer. If she needs to format and reinstall Windows XP.
    She did not have a sticker with a code on his computer from the store of the local computer. She won't pay hundreds of dollars just to get xp installed.

    Question #1: Must the machine store provide stickers key code when window selling?

    Question # 2, she had the sticker with a code, it could install it with a normal drive in Widows XP Home Edition using his key code?

    I was helping a friend with his computer. She bought a computer to measure with Widows XP installed on it, a store of the local computer, about three months ago. She got big virus on his computer. If she needs to format and reinstall Windows XP.
    She did not have a sticker with a code on his computer from the store of the local computer. She won't pay hundreds of dollars just to get xp installed.

    Question #1: Must the machine store provide stickers key code when window selling?

    Question # 2, she had the sticker with a code, it could install it with a normal drive in Widows XP Home Edition using his key code?

    I'd be very suspicious of any Windows installation where the seller has NOT provided a product key.
    There are utilities that will tell you what the product key is a copy installed Windows.
    This is what I use:
    http://www.Belarc.com/free_download.html
    You must go back to the store and query why there was no product key...

  • Two questions regarding the restoration of the system.

    If you restore a computer to the factoy setting, it should get rid of any virus or spyware that is on this computer?

    Is it normal that the text and graphics to appear a bit odd during the restoration of the system, it seems that the resolution is not terrible.

    Thanks in advance.

    Hello

    There are some malicious programs that can survive even a format and a facility so if your restoration or
    Recovery has been infected certainly the malware might still be in the game. Did you use a Restore Point
    who she returned to a shortwhile ago, or do a restore to the new factory
    installation? A restoration is most likely still infected only once.

    The video driver may need to be updated.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ===========================

    If you need to search for malware:

    No one program cannot be used to detect and remove any malware. Added that often easy to
    detect malware is often accompanied by a much more difficult to detect and remove the payload. If its
    better to be too full now than to pay the price much later. Check with these extreme
    Overkill point and then run the cleaning only when you are sure that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
    the regular windows when you can.

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits
    UnHackMe execution)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can download
    It's here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
    It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
    How to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
    Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
    taken (such as the anti-virus software, firewall, etc.).
    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    http://OneCare.live.com/site/en-us/default.htm

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • The appellant said that they are the windows and claims assistance office that my computer sends errors on the network.

    End of history

    It is illegal to do what you want to do.

    You may not knowingly set out to infect the computer of another by malicious software.

    Two wrongs don't make a right.

    Report phone scams

    See you soon.

  • Several questions in the computer.

    Hello

    I use my computer a lot. I sell on ebay and my computer is on and in use about 16 hours a day.  I'm not really computer smart, but know a little.

    When I try to REList an item on ebay and need to edit or delivery, the part of the list of the description is in html.  When he uses to say "Add description" below, it would mean standard and HTML, which is no longer there. The other day I received a warning message that says script site. I am very frustrated because I need to REList items. My computer is 3 years old. He began to gel, cannot do a thing. I have to use Ctrl alt delete and start again. The other night, the screen went black. I am wanting to buy a new computer, but my husband thinks I should try to start the computer around as if it were new. Don't know what to do.  I am able to access the correct display for ebay on my husband's old super computer, so it's something on my own.

    Thanks for your help

    You try to run the troubleshooter in Windows 7, The Maintenance of the system and check if it helps.

    Open the troubleshooting of System Maintenance utility

    http://Windows.Microsoft.com/en-us/Windows7/open-the-system-maintenance-Troubleshooter>

    `~`

    Open the troubleshooter of Performance

    http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter>

    http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance >

    `~`

    The time and date of this moment in Washington, United States of America is 15:54

    Tuesday, November 19, 2013
    Pacific (PST) - 0800 UTC standard time

    UTC/GMT is 23:54 Tuesday, November 19, 2013

    Current weather conditions in Seattle

    Cloudy47 ° F / 8 ° C
  • suspicious customer relationship questions on the computer's performance in windows 7

    I received calls for two days of GPS Customer Relations, division of Microsoft Windows ask me questions about the performance of my computer. Is it a scam?

    Wednesday, September 19, 2012 17:12:51 + 0000, Charlene BZ wrote:

    I received calls for two days of GPS Customer Relations, division of Microsoft Windows ask me questions about the performance of my computer. Is it a scam?

    Yes!

    It's a scam and with various names and phone numbers, is
    very frequent lately.

    In addition to their money get on your part to do anything of any value,
    If you leave them in your computer, which knows what losses they did are
    where confidential information they stole.

    So if you have done so, I highly recommend that you do both of the following
    immediately:

    1 do a clean reinstall of Windows.
    2. change all of your passwords, especially banks or other
    financial sites.
    Ken Blake, Microsoft MVP

  • regarding the computer hp pavilion dv6-7010us laptop

    Office word starter 2010 which was prestressed in the computer when you purchase office is no longer open. How can I recharge? He wasn't a disc or product key. We need for school work.

    Hello

    Please use the following fix:

    http://support.Microsoft.com/kb/2465140

    Good luck.

  • Several questions on the computer of Windows 8.

    OT: Help me please...

    with a degenerative brain disease of more changes of today have totally confused me - particularly the visuals - everything I had the habit of pages is changing - google - my email - my ISP - it's just too take taken enough inside long to get used to win 8 - todays updates are the worst for me - stress and anxiety today don't contribute - what should I do - give up the computer? -I live alone, but not home - my computer has been my lifeline - now I'm afraid its my Glas...

    Your programmers need to start working on programs for the mentally handicapped who are literate and have some of their spirit on them - but change led to confusion... and there are too many change!

    Pls reply to my email.

    Most of that is not something that we can really control.  Google for example like to keep things fresh and constantly changing their drawings and models and options and things.  But as you have seen, it is certainly not a behavior limited to just Google.

    One of the best things I can recommend is really the most consistency, to choose a program like you who can interface with the service, still provide compatible environment. Taking the e-mail for example, instead of using Gmail or your ISP site that allows to change, use a program such as Windows Live Mail that will not change (because it's a program installed that won't change unless you intentionally go get a new version).  So no matter what happens on the site of the ISP, your mail will still look and work the same way.

  • Facing questions on the computer of Windows 8

    Hi there, my desktop computer (with windows pre-installed 8) worked well for 12 months, until it upgraded to windows 8.1.  blue screen basically said that windows did not load properly (or works for this purpose) I'm not particularly good with computers then taken to a computer shop.  The computer shop asked for the disc of windows 8 that I have, but not the blue liner with the code license.  The computer shop said that they do help me more.  Cannot so one get a permit for the drive I have?  Or am I sabotaged?

    concerning

    Mick

    Since you had windows installed 8.0 when you bought your computer, you should have a recovery Partition and when you perform a restore will be automatically retrieved the activation key and your Windows is activated. Product keys are now stored in the motherboard. Use the disk that you have if it came with your computer and your Windows 8 will be activated automatically. If the disc is from another source, it will not work unless you buy a new product key. Buy the way I would do the computer shop to solve your problem or refund you. Hope this helps and if you need any additional aid station and we will be happy to help you.

    The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

    "When we try to take anything by itself, we find it hitched to everything else in the universe."-John Muir

    If this has answered your message please mark as answer.

  • Questions on the computer stop, must try to stop twice

    Original title: twice to close...

    Windows xp-Dell Latitude E6500... when I try to shut down or restart, I have to try twice before his arrest... What's wrong?

    Hello

    Remember to make changes to the computer before this problem?

    I suggest you to disconnect all external devices such as printer, scanner, etc, that are attached to the system and check if the issue persist.

    Follow these steps:

    Method 1: I suggest do you a clean boot and check if you are able to close download the computer correctly.

    How to configure Windows XP to start in a "clean boot" stat
    http://support.Microsoft.com/kb/310353

    Note: -after troubleshooting, turn on the computer to a normal startup.

    Method 2: Advanced Troubleshooting for shutdown problems in Windows XP

    http://support.Microsoft.com/kb/308029

    See the article:

    Windows unresponsive during Windows XP stop dow

    http://support.Microsoft.com/kb/307274

  • Questions regarding the cancellation, terms of use and confusing wording

    Hello. While I am very confused and becoming more frustrated, I'll try to keep this civil, as I am well aware that this may very well be a horrible misunderstanding on my part.


    After trying - and failing - repeatedly to cancel my subscription to creative cloud, I saw information indicating that I have would be charged

    50% of my annual contract remains.


    The problem is that is not in the terms of use, I was bound to it by setting my plan.


    Legal terms of use | Adobe


    It is the document that I was bound to create my account and set up my payment. I know there is no mention of this "obligation" in the terms of use, because I'm actually one of those people who reads the areas of these documents that are relevant to me - namely payment and termination.


    I've since read the terms of use of many times and can find no mention of the cancellation of this tax by 50%. In fact, the only mention of any form of payment is a vague mention of "exceptional costs" - but I'm sure anyone would tell you, an exceptional tax is something that you have been charged for but still have to pay, not a potential burden in the future that you may incur.


    There is mention of the charge of 50% when purchasing the product, but this is purely in relation to 'this month billing period' - that's what I'm misunderstanding? The idea of being charged for a month for a service I don't use is weird when it's a purely digital product that has no additional cost to the provider, but does relative sense for me at the time - if I get the service for the month, it is logical would be to pay for it.


    "you will be charged 50 percent of your remaining contract obligation and your service will continue until the end of the this month billing period.



    So I charged my contract of service/remaining half? My service until the end of the month? I am very confused and the wording of this sentence does not help. What is my "the contract obligation left?" - I thought it was paid monthly as part of the "annual plan", renewed annually. What duty should I pay for a service that you provide is no longer?


    I realize that this may be entirely my fault and I may have completely misunderstood the faded gray text badly written outside the conditions of use, but even if this is the case and I'm at fault, I understand what I actually agreed, because I'm misunderstanding is obviously something or I'm subject to something not in the terms of use link.


    What is - what apart from the addition of the terms of use really mean and how does Adobe justify this? I just want to cancel a service that I pay every month for. He calls an "annual plan" just confuses things; If you provide the service every month and the costs of it every month, and the service ends the month off, so how is it an annual service?

    I feel that I am not smart enough to figure out something that should be very simple. If this is part of the terms of use, why is he not inside the terms of use? Any help would be appreciated on what I apparently got myself to.

    I was wondering if you looked at the bad terms on the accident. The ones referenced when registering for a subscription. Adobe - General conditions of subscription

Maybe you are looking for