Rainbows
My friend has saved our marriage with a Canon XHA1 camcorder. There was a nice Rainbow after the wedding (it was a wedding in the open air), but it was not visible on the recording. If someone has encountered this problem, and if so is there a solution in first, or is it all in the filming of the process? I've attached a video still of the video. Thank you.
the peak of the sample you posted is overexposed. In general, it is better "under-expose" slightly more, than to the overexposure with digital photography. Once that a video is overexposed it is usually not possible to recover areas overexposed. Your sky should be more like the tone you see below, to see your rainbow.
Maybe you can draw a rainbow somewhere and edit it in your wedding... video to compensate for what you don't have.
Good luck!
Tags: Premiere
Similar Questions
-
MacBook runs very slowly, Rainbow pinwheel all the time
A few weeks ago my Safari began to act and to quit almost immediately when I opened it, I so reset my laptop full and cleaned then reinstalled the latest OS X. It worked after that and I can open and use it, but now I started to do the rainbow reel almost everytime I try to do anything, even typing the reel has revealed about 30 times.
In order to clarify the roulette is shown all the time even outside of Safari, when I click, I type, when I open applications, etc..
Use the etrecheck to etrecheck.com and to see which are running on your Mac.
-
Brand new (end of 2015) MacBook Air turning wheel Rainbow. How can I stop it?
How to stop the spinning Rainbow wheel on my new MacBook Air?
It is collateral to take service: you can make an appointment at the Apple Store - Genius Bar store and bring it into service. You can also search an Apple Store - find a store - Apple.
-
Is the old puzzle slide with the Rainbow Apple logo always around here?
Is the old puzzle slide with the Rainbow Apple logo always around here?
For people who still have the old Mac OS 9, it is, but you must before mid-2006 PowerPC Mac to run it in classic, or to get a such a Mac ROM to install with a program called Sheepshaver. Depending on your country, get a such ROM cannot be legal.
-
Stuck on blue screen with Rainbow clouds, floating section did not help.
As it is said.
When I run Skype, it just goes straight to a blue screen with blue clouds and a rainbow green at the bottom. I get no login prompt. I followed various guides, such as the change of name login Login1, removal of connection, restart the computer, uninstall and then install Skype (which gets me an error code 2734, I think), uninstalled and installed Internet Explorer. I ran windows update and everything is up-to-date. I also followed the advice in the section floating, and even after using the command line (which was not in the Accessories folder, had to search for cmd to find) and reboot, "press this button" does not work.
Skype worked fine on Sunday, and now it's broken. The only thing I've done in the meantime is run a repair tool for Windows Media Player as a game, I have installed required him to play in the music of the game.
EDIT: I am using Windows 7.
Is your Windows 32 bit or 64 bit?
http://support.Microsoft.com/kb/827218
What is the version of Internet Explorer installed on your computer?
In Internet Explorer, go to help-> words of Internet Explorer.
-
MacBook pro 13-inch el capitan always show the Rainbow of dead ball
Right now I'm using Macbook Air 13 inch mid 2012
I have once again updated my iphone 4 ios s 8.0.2 to 9.1.2 using my mac and I left the mac update this throughout the night
But tomorrow after I tried to run my mac, it turns very slow and I finally discovered that my mac always show the Rainbow ball dead once that he "freeze" or "hangs." I have a problem when I run any application, try to press one of the sound, light, stop buttons in the row or even write something about the spotlight
I tried several thing to get my mac
(1.) I tried to stop the do not respond forcefully quit
2.) open the activity monitor and try to leave the app consuming so much memory or running % CPU
3.) doing repair disk
4.) close with force the mac by pressing the power button
5.) try to restart using the command + alt + shift + power button / stop or command + R + power button front for my mac to turn on (and another way to turn on the mac I don't remember really
6.) download the application "CleanMyMac3" and clear about 100 GB of data
7.) I also check my hard drive internal and I know I have still 250 gb of my memory of free space
Anyone has idea what should I do to make my normal Mac turn? I need quick answer as soon as possible
First, you must uninstall CleanMyMac. This program is bad, bad news. It's the fraudulent crapware, I can be honest. You should never, never, never download any program 3rd party to remove anything from your computer, sight unseen. You do not know which files were contained in this 100 GB, and that's what makes it dangerous. Your computer has been damaged, well beyond what was he runs everything until you did. Mac do not need software 'maintenance' that claims to clean, organize, update or optimize it. They do a great job of taking care of themselves, to the extent where that goes. So, until the problems you encounter may be addressed, you need to uninstall completely in accordance with the instructions of the developer. You can find them here. Do exactly what these directions say to do. If you do not, you will need to reinstall to uninstall correctly.
Once you take care of it, go to http://www.etresoft.com/etrecheck , download and run EtreCheck, copy paste here the status report.
-
Tecra M2 errors with screen: colors black, white & Rainbow fade in and out
My laptop screen fades in and out with the colors white, black, grey and Rainbow. No command/function is able to accomplish. When I disable (using the power button) and back on, it goes back to wipe the screen. My laptop is currently useless. Someone had this problem? Any help for a novice? Thank you
Hello
The best thing you can do is to test it with the external monitor. If the external monitor shows your desktop well probably the LCD is faulty. By the same result on the external monitor, the problem may be caused by a faulty graphics card.
That's all that I can say about it.
-
Ripples of Rainbow pro iPad screen
Is it normal to have a few rainbow waves inside the screen of the ipad pro with pressure with the Palm of my hand while using the pencil to apple?
Do not put too much pressure on the screen.
-
MacBook Pro 2012 Rainbow ball of death every few seconds
Hello world.
I have known shift problems with my Macbook Pro 13 inch 2012. I have IE installed Capitan. I don't know what the problem is, but I did a lot of things to try to solve this. I can post more details if necessary, but I am currently typing on my macbook which is incredibly laggy and it's hard to type anything.
(1) repair disk permissions
(2) checked Activity Monitor and RAM and CPU appear to well (and I see that when no application is opened)
(3) reinstalled El Capitan, after erasing
(4) zero applications open except Safari as I type this
(5) have tried to do first aid on Macintosh HD in disk utility, but the disc is fine
(6) Ran Apple Hardware Test and no material turned out to be problematic
(7) allow indexing full spotlight, but just in case, as he stopped to work just to see if it would help
(8) to reset the SMC and LANDAU
(9) I have a backup on my external hard drive
Lag problems (where the wheel of the Rainbow of death appears and then goes away after 30 seconds or more) still occur even if an activity very very minimum occurs. This shift comes once in a while, it's something unbearable. GAL produced any application that I use (eg. Chrome, Safari, Finder, system preferences, etc.).
I have a log from the Console that appeared like I barely did anything in Safari, come on a browser window, but he started trolling very poorly. I can't read the newspapers and even if I tried, I don't see what the problem with my laptop.
2015-11-28 10:05:09.106 PM apsd [72]: MessageTracer: load_domain_prefix_whitelist:120: missing default whitelist file: /System/Library/PrivateFrameworks/CrashReporterSupport.framework/Resources/Subm itDiagInfo.default.domains
2015-11-28 10:05:14.720 PM WindowServer [149]: _CGXRemoveWindowFromWindowMovementGroup: window 0x1a is not attached to the window 0 x 52
2015-11-28 10:05:15.477 Safari [251] PM: KeychainGetICDPStatus: key :-25300
2015-11-28 10:05:15.477 Safari [251] PM: KeychainGetICDPStatus: status: power off
2015-11-28 10:05:26.660 PM sandboxd [124]: com.apple.Safari (469) ([469]) deny com.apple.CoreServices.coreservicesd mach-search
2015-11-28 10:05:26.670 PM sandboxd [124]: com.apple.Safari (469) ([469]) deny-metadata-reading of files/usr
2015-11-28 10:05:39.994 PM com.apple.xpc.launchd [1]: (com.apple.WebKit.Networking.7B4BBD32-16A2-4A1E-929D-91211DCB7F0B [467]) Service came out with abnormal code: 1
Com.apple.SecurityServer [75 of 10:06:12.375 PM 2015-11-28]: Session 100030 created
2015-11-28 10:06:18.715 PM WindowServer [149]: _CGXRemoveWindowFromWindowMovementGroup: window 0x1a is not attached to the window 0 x 52
2015-11-28 10:06:18.716 PM [251] Safari: 17 22 tcp_connection_tls_session_error_callback __tcp_connection_tls_session_callback_write_block_invoke.434 error
2015-11-28 10:06:18.716 PM Safari [251]: error in tcp_connection_tls_session_error_callback 21 __tcp_connection_tls_session_callback_write_block_invoke.434 22
2015-11-28 10:06:18.717 Safari [251] PM: __tcp_connection_tls_session_callback_write_block_invoke.434 18 22 tcp_connection_tls_session_error_callback error
2015-11-28 10:06:18.717 Safari [251] PM: __tcp_connection_tls_session_callback_write_block_invoke.434 20-22 tcp_connection_tls_session_error_callback error
2015-11-28 10:06:18.718 PM Safari [251]: 19 22 tcp_connection_tls_session_error_callback __tcp_connection_tls_session_callback_write_block_invoke.434 error
2015-11-28 10:06:18.718 Safari [251] PM: __tcp_connection_tls_session_callback_write_block_invoke.434 16 22 tcp_connection_tls_session_error_callback error
2015-11-28 10:06:19.036 PM Safari [251]: 22 22 tcp_connection_tls_session_error_callback __tcp_connection_tls_session_callback_write_block_invoke.434 error
2015-11-28 10:07:01.898 PM Safari [251]: # cannot load the AddressBook class CNContactNameFormatter
2015-11-28 10:07:04.113 PM WindowServer [149]: _CGXRemoveWindowFromWindowMovementGroup: window 0x1a is not attached to the window 0 x 52
2015-11-28 10:07:04.116 Safari [251] PM: __tcp_connection_tls_session_callback_write_block_invoke.434 25 22 tcp_connection_tls_session_error_callback error
2015-11-28 10:07:04.116 PM Safari [251]: 26 22 tcp_connection_tls_session_error_callback __tcp_connection_tls_session_callback_write_block_invoke.434 error
2015-11-28 10:07:04.117 Safari [251] PM: __tcp_connection_tls_session_callback_write_block_invoke.434 24 22 tcp_connection_tls_session_error_callback error
2015-11-28 10:07:04.117 Safari [251] PM: __tcp_connection_tls_session_callback_write_block_invoke.434 28 22 tcp_connection_tls_session_error_callback error
2015-11-28 10:07:04.117 Safari [251] PM: __tcp_connection_tls_session_callback_write_block_invoke.434 27 22 tcp_connection_tls_session_error_callback error
2015-11-28 10:07:04.118 PM Safari [251]: 23 22 tcp_connection_tls_session_error_callback __tcp_connection_tls_session_callback_write_block_invoke.434 error
2015-11-28 10:07:04.314 PM Safari [251]: 29 22 tcp_connection_tls_session_error_callback __tcp_connection_tls_session_callback_write_block_invoke.434 error
2015-11-28 10:07:43.919 PM WindowServer [149]: _CGXRemoveWindowFromWindowMovementGroup: window 0x1a is not attached to the window 0 x 52
2015-11-28 10:07:44.105 PM Safari [251]: 36 22 tcp_connection_tls_session_error_callback __tcp_connection_tls_session_callback_write_block_invoke.434 error
I do not have a moment where everything started late in Safari and I saw these papers appear:
2015-11-28 10:50:55.101 PM com.apple.xpc.launchd [1]: (com.apple.xpc.launchd.domain.user.501) Service "com.apple.xpc.launchd.oneshot.0x10000010.AppleSpell" attempted to divert the end point "fi (Apple) _OpenStep" owner: com.apple.xpc.launchd.oneshot.0x10000003.AppleSpell
2015-11-28 10:50:55.102 PM com.apple.xpc.launchd [1]: (com.apple.xpc.launchd.domain.user.501) Service "com.apple.xpc.launchd.oneshot.0x10000010.AppleSpell" attempted to divert the end point "_OpenStep en (Apple)" owner: com.apple.xpc.launchd.oneshot.0x10000003.AppleSpell
2015-11-28 10:50:55.102 PM com.apple.xpc.launchd [1]: (com.apple.xpc.launchd.domain.user.501) Service "com.apple.xpc.launchd.oneshot.0x10000010.AppleSpell" attempted to divert the end point "TI (Apple) _OpenStep" owner: com.apple.xpc.launchd.oneshot.0x10000003.AppleSpell
2015-11-28 10:50:55.102 PM com.apple.xpc.launchd [1]: (com.apple.xpc.launchd.domain.user.501) Service "com.apple.xpc.launchd.oneshot.0x10000010.AppleSpell" attempted to divert the end point "_OpenStep ko (Apple)" owner: com.apple.xpc.launchd.oneshot.0x10000003.AppleSpell
2015-11-28 10:50:55.102 PM com.apple.xpc.launchd [1]: (com.apple.xpc.launchd.domain.user.501) Service "com.apple.xpc.launchd.oneshot.0x10000010.AppleSpell" attempted to divert the end point "nb (Apple) _OpenStep" owner: com.apple.xpc.launchd.oneshot.0x10000003.AppleSpell
2015-11-28 10:50:55.102 PM com.apple.xpc.launchd [1]: (com.apple.xpc.launchd.domain.user.501) Service "com.apple.xpc.launchd.oneshot.0x10000010.AppleSpell" attempted to divert the end point "_OpenStep nl (Apple)" owner: com.apple.xpc.launchd.oneshot.0x10000003.AppleSpell
2015-11-28 10:50:55.102 PM com.apple.xpc.launchd [1]: (com.apple.xpc.launchd.domain.user.501) Service "com.apple.xpc.launchd.oneshot.0x10000010.AppleSpell" attempted to divert the end point "_OpenStep pl (Apple)" owner: com.apple.xpc.launchd.oneshot.0x10000003.AppleSpell
2015-11-28 10:50:55.102 PM com.apple.xpc.launchd [1]: (com.apple.xpc.launchd.domain.user.501) Service "com.apple.xpc.launchd.oneshot.0x10000010.AppleSpell" attempted to divert the end point "pt (Apple) _OpenStep" owner: com.apple.xpc.launchd.oneshot.0x10000003.AppleSpell
2015-11-28 10:50:55.103 PM com.apple.xpc.launchd [1]: (com.apple.xpc.launchd.domain.user.501) Service "com.apple.xpc.launchd.oneshot.0x10000010.AppleSpell" attempted to divert the end point "pt_BR (Apple) _OpenStep" owner: com.apple.xpc.launchd.oneshot.0x10000003.AppleSpell
2015-11-28 10:50:55.103 PM com.apple.xpc.launchd [1]: (com.apple.xpc.launchd.domain.user.501) Service "com.apple.xpc.launchd.oneshot.0x10000010.AppleSpell" attempted to divert the end point "pt_PT (Apple) _OpenStep" owner: com.apple.xpc.launchd.oneshot.0x10000003.AppleSpell
2015-11-28 10:50:55.103 PM com.apple.xpc.launchd [1]: (com.apple.xpc.launchd.domain.user.501) Service "com.apple.xpc.launchd.oneshot.0x10000010.AppleSpell" attempted to divert "_OpenStep ru (Apple)" termination point of the owner: com.apple.xpc.launchd.oneshot.0x10000003.AppleSpell
2015-11-28 10:50:55.103 PM com.apple.xpc.launchd [1]: (com.apple.xpc.launchd.domain.user.501) Service "com.apple.xpc.launchd.oneshot.0x10000010.AppleSpell" attempted to divert the end point "sv (Apple) _OpenStep" owner: com.apple.xpc.launchd.oneshot.0x10000003.AppleSpell
2015-11-28 10:50:55.103 PM com.apple.xpc.launchd [1]: (com.apple.xpc.launchd.domain.user.501) Service "com.apple.xpc.launchd.oneshot.0x10000010.AppleSpell" attempted to divert the end point "_OpenStep tr (Apple)" owner: com.apple.xpc.launchd.oneshot.0x10000003.AppleSpell
2015-11-28 10:50:55.103 PM com.apple.xpc.launchd [1]: (com.apple.xpc.launchd.domain.user.501) Service "com.apple.xpc.launchd.oneshot.0x10000010.AppleSpell" attempted to divert the end point "_OpenStep multilingual (Apple)" owner: com.apple.xpc.launchd.oneshot.0x10000003.AppleSpell
2015-11-28 10:51:03.801 PM AppleSpell [369]: *-[NSMachPort handlePortMessage:]: a fall incoming message because the connection is not valid
2015-11-28 10:51:03.801 PM AppleSpell [369]: *-[NSMachPort handlePortMessage:]: a fall incoming message because the connection is not valid
2015-11-28 10:51:03.801 PM AppleSpell [369]: *-[NSMachPort handlePortMessage:]: a fall incoming message because the connection is not valid
2015-11-28 10:51:03.802 PM AppleSpell [369]: *-[NSMachPort handlePortMessage:]: a fall incoming message because the connection is not valid
2015-11-28 10:51:03.802 PM AppleSpell [369]: *-[NSMachPort handlePortMessage:]: a fall incoming message because the connection is not valid
2015-11-28 10:51:40.500 PM AppleSpell [369]: *-[NSMachPort handlePortMessage:]: a fall incoming message because the connection is not valid
2015-11-28 10:51:40.501 PM AppleSpell [369]: *-[NSMachPort handlePortMessage:]: a fall incoming message because the connection is not valid
Thoughts?
My gut feeling is that your HARD drive has failed. Make sure you have in place a current redundant backup plan.
Did you clone to boot from an external start, that confirm or deny that it is the internal HD failure.
-
picture keeps disappearing past Rainbow flashing mode
HP AMD A6 - 4400M, Radeon 64-bit Windows 7 OS HD graphics card
Model-1849
Hello again shiner23348,
Thanks for the quick response!
Based on the information you provided in your post, I recommend to start your computer in Mode without failure. This will load your operating system with few drivers or process. To do this, please follow this document on the Safe Mode of Windows 7. If the Rainbow display does not appear safe mode, it could be a corruption of software with your user account. To do this, please follow this document on the management of the accounts of users and connections (Windows 7). This should contribute to a "blank canvas" installation to reinstall all the software for your new account, without any process that would cause the color of the Rainbow view.
If the problem persists, I suggest creating a backup of your important files and performing a recovery of your operating system. To do this, please follow this document on the backup of files (Windows 7) , and more to perform a recovery of the system (Windows 7) HP for a Factory Reset.
Please re-post with the results of your troubleshooting, and I look forward to your response!
Concerning -
Hello
I use Labview 8.5 with the acquisition of a camera. I can see the image and want to display it
with colors 'Rainbow '. To do this, I click on "picture on ' right and choose 'Rainbow '.
It's works fine, but is it possible to have the color of the image scale? I know the colors
corresponds to the scale of the gray of the base image, but I can't find the scale exactly. In general, I'd
would like to know if the difference between the different colors is great or not.
For example, the comparison: http://www.sracquebec.org/realisations/dossiers/GradientCouleurEclipseLune_DominiqueBeauchamp_07/rgb...
I find my answer in the forum, thank you in advance!
Concerning
Oh I'm sorry, this isn't the good implementation of request for that!
-
Hello
How can I save a sgl in grayscale as the Rainbow?
I analyze the image to grayscale, but for the presentation, I need to show it in the Rainbow.
my code does not work, however
This turns out be a "deep" enough question that penetrates in many subjects, not particularly well covered in the documentation of the IMAQ (or not always as accessible as one would like). There are several related subtopics:
- Display Images in grayscale on the screens of PC 'normal '.
- Efficient "colorization" to the image in grayscale.
- Use of Tables (LUT) in the Image colorization.
On several occasions, I've tinkered with elements of this problem, but never quite "understood." However, some comments and messages by Hatef Fouladi and some research around the Documentation of Vision LabVIEW has led me to a better understanding of this issue and a "partial" solution (I call that because he could not directly answer the question posed by the original poster).
I will start your indulgence - as well for myself, my students and this Forum, I want to try to provide some of the 'missing Documents', which will need about a day or two of work. I can tell you that I have a provisional working routine that can take a 'gray gradient", and after applying the 'Rainbow' LUT, turn it into a PNG that... looks like a rainbow.
But the drafting of this response and is about to "apologize" to make you wait, I realized that I had, indeed, 'colorized' my Image (as verified by the on-screen display), I had forgotten that the goal was to save the PNG image colorized. Then I added the function Write PNG, saw the entrance of the "color scheme" and said: "Hmm, I wonder...". ", which brings me to this:
I chose to work with Images in grayscale U8. A note of hard to find here, from the manual of Vision LabVIEW 2010, explains that the PC screens can show 256 gray levels, so U16 Images must be 'remapped' to a range of U8 before visualization in grayscale.
The nested for loops generate a 128-by-128 pixels "grayscale, with 0 (black) in the upper left and 254 (white, almost) lower right." This is the Image I want to use, write it as Gray.png. The IMAQ write file 2 (IMAQ functions changed a few years ago, many taking a suffix '2') has a Color Palette and IMAQ entry provides some standard LUTs (that he calls "Pallets"), including "Rainbow", using IMAQ GetPalette. I plugged this place to a second function write file 2, and the results are presented below.
I still intend to write this to the top again, but this "solution" is so simple, and explain what I hope is already sufficiently complex, I can take a little more time to "do things." I'll (eventually) post here (or, at least, these are my good Intentions).
Bob Schor
-
my computer play rainbow six vegas 2
My computer specs are
procceser: processor intel pentium dual core 2.5ghz
RAM: 2 GB ddr2
HD: 320 GB
Graphics: graphics NVIDIA® GeForce® 7100 integratedand I was wondering is there a way to increase the memory of the graphics and can my computer play rainbow six vegas 2 comfortably and what kind of rate can I expect something above 30 frames per second would be pretty good thanks
Hi Alex,
The game is compatible with both Windows 7 and Windows Vista, check the links below for more information.
http://www.Microsoft.com/Windows/compatibility/Windows7/enus/search.aspx?type=software&s=Rainbow%20six%20vegas%202
http://www.Microsoft.com/Windows/compatibility/windowsvista/search.aspx?type=software&s=Rainbow%20six%20vegas%202Here are the system requirements for the game to run on any computer.
- Processor: Pentium 4 3 GHz or AMD Athlon 3000
- Memory: 1 GB RAM
- Graphics card: 128 MB compatible Shader 3.0, 9.0 c compatible card DirectX video
- Sound: Card its DirectX 9.0 c compatible
- DirectX: DirectX 9 .0c
- Hard drive: 7 GB free
- Peripherals supported: Windows-compatible keyboard and mouse, gamepad Xbox 360 for Windows
- Multiplayer: Internet broadband connection with Kbps 128 kbps upstream or faster.
- Supported video cards: ATI RADEON X 1600-1950 / HD 2000 / 3000 series, NVIDIA GeForce 6600-6800 / 7 / 8 series; Laptop versions of these cards are not supported.
You can also post your request in the Ubisoft Forums for more details: http://forums.ubi.com/eve
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
I have display problems with a game that I just downloaded. The game is Annihlation Total; the game does not appear correctly. He works for a few seconds, all the graphics turn Rainbow and I can't seem to stop. Tried to run in compatibility mode; did not work. I hope there is a solution because this is one of my favorite games...
Hi razorbladeapple,
(a) what operating system do you have? And also to indicate the version?There is currently no information on the compatibility of the game with Windows 7.You can also try to check compatibility here: http://www.microsoft.com/windows/compatibility/windows-7/en-us/Default.aspx(b) is the display horizontal bar change only whem you play the game?(c) you have installed the updated display drivers?Some devices have drivers you need to install yourself. If you download a driver that is not self-installable, follow these steps:
You must be logged on as administrator to perform these steps.For more information, see: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly
Update drivers: recommended links
http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-linksContact GT Interactive and check what they have to say about the compatibility of the game with Windows 7 because they are the best people to offer support.
Aziz Nadeem - Microsoft Support -
Rainbow Six Tom Clancy: Vegas to play on Windows Vista
requirements of $ are missing. How the recommended requiremnts?
Hi misudaily243,
Are there errors in trying to play the game or install the game?
You can run the game in compatibility mode and check if it helps. See the links below: make sure to run older programs in this version of Windows: http://windows.microsoft.com/en-us/windows-vista/Make-older-programs-run-in-this-version-of-Windows
How to troubleshoot program compatibility issues in Windows Vista: http://support.microsoft.com/kb/927386
If the material requirement is does not then you need to contact the manufacturer of the system.
Check the minimum system requirements: Rainbow Six Vegas download minimum system requirements for Tom Clancy
Supported operating system: Windows XP (only)
Processor: Pentium 4 3 GHz or AMD equivalent
RAM: 1024 MB
Video card: 128 MB, Shader Model 3 and DirectX 9 compatible .0c
Sound card: DirectX 9 compatible .0c
DirectX version: DirectX 9 .0c
Supported devices: mouse, keyboard, headset, Xbox 360 controller, etc.
Multiplayer:
Local area network (LAN) and/or connection cable/DSL 128kbit for game online
Thank you, and in what concerns:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
colours of the Rainbow on diablo?
bought diablo battlechest. Diablo plays with the colours of the Rainbow after opening, diablo II play not at all. I have a dell laptop inspiron 15. Help!
I only have Diablo 2, but--
Install using the XP sp2 compatibility mode and turn off "composition of the bureau.
To install in compatibility mode close the installation/Setup screen after the autorun of CD.
Then visit - Start/computer and R / click on the DVD drive.
Now click on Open - and R/click - setup.exe (or whatever the installation program is called. "It will be a .exe) - then properties and compatibility for XP - sp2 in this case.
Check run... as administrator, lucky.
Now start the installation directly from setup.exe.Install the patch-
https://us.battle.NET/support/en/article/Diablo-II-patch-informationThe program below will solve the problems of color with Diablo 2. I don't know if this will help with Diablo.
There is also other parameters such as the higher resolution.
Maybe you are looking for
-
I lost my tab '+' in my toolbar. How to restore?
I lost my tab '+' in my toolbar. How to restore? I could restore my + (to open a new tab). The only way I can open new tab now, is I have 1 (new tab) button on the upper right corner of my screen.
-
Black screen on Satellite C660-2JD
I'm having a problem with a laptop, friends, windows starts normally and then after all goes just the loading screen black with the cursor (arrow) on the screen, I can move the cursor but nothing else can be done. If anyone has had this problem befor
-
HP pavolion g6: network controller
Hi help me driver for network controller... my hardware id- PCI\VEN_8086 & DEV_008B & SUBSYS_53158086 & REV_34PCI\VEN_8086 & DEV_008B & SUBSYS_53158086PCI\VEN_8086 & DEV_008B & CC_028000PCI\VEN_8086 & DEV_008B & CC_0280
-
I can't send or receive emails he asked me my password and the one I have is not accepted I'm no emails on my computer and my bladckberry
-
I created with an e-mail account that is different from my Outlook account, but don't receive mail on behalf of WinMail WinMail.