Scale of the Rainbow

Similar Questions

• Is the old puzzle slide with the Rainbow Apple logo always around here?

  Is the old puzzle slide with the Rainbow Apple logo always around here?

  For people who still have the old Mac OS 9, it is, but you must before mid-2006 PowerPC Mac to run it in classic, or to get a such a Mac ROM to install with a program called Sheepshaver.  Depending on your country, get a such ROM cannot be legal.

• MacBook pro 13-inch el capitan always show the Rainbow of dead ball

  Right now I'm using Macbook Air 13 inch mid 2012

  I have once again updated my iphone 4 ios s 8.0.2 to 9.1.2 using my mac and I left the mac update this throughout the night

  But tomorrow after I tried to run my mac, it turns very slow and I finally discovered that my mac always show the Rainbow ball dead once that he "freeze" or "hangs." I have a problem when I run any application, try to press one of the sound, light, stop buttons in the row or even write something about the spotlight

  I tried several thing to get my mac

  (1.) I tried to stop the do not respond forcefully quit

  2.) open the activity monitor and try to leave the app consuming so much memory or running % CPU

  3.) doing repair disk

  4.) close with force the mac by pressing the power button

  5.) try to restart using the command + alt + shift + power button / stop or command + R + power button front for my mac to turn on (and another way to turn on the mac I don't remember really

  6.) download the application "CleanMyMac3" and clear about 100 GB of data

  7.) I also check my hard drive internal and I know I have still 250 gb of my memory of free space

  Anyone has idea what should I do to make my normal Mac turn? I need quick answer as soon as possible

  First, you must uninstall CleanMyMac.  This program is bad, bad news.  It's the fraudulent crapware, I can be honest.  You should never, never, never download any program 3rd party to remove anything from your computer, sight unseen.  You do not know which files were contained in this 100 GB, and that's what makes it dangerous.  Your computer has been damaged, well beyond what was he runs everything until you did.  Mac do not need software 'maintenance' that claims to clean, organize, update or optimize it.  They do a great job of taking care of themselves, to the extent where that goes.  So, until the problems you encounter may be addressed, you need to uninstall completely in accordance with the instructions of the developer.  You can find them here.  Do exactly what these directions say to do.  If you do not, you will need to reinstall to uninstall correctly.

  Once you take care of it, go to http://www.etresoft.com/etrecheck , download and run EtreCheck, copy paste here the status report.

• Chart WPF: AllPlots collection does not contain the scales in the second time.

  Hello

  I'm using WPF OR chart, and I'm in the binder through the datasource property.

  I have two axes in XAML that represent the scales.

  When you press the button I create random data (shown in the code below).

  But when I delete all data and adds the data in the list of places that have already been added in the past (for example: if I added 3 data in the past and now I'll add only 2 or 3), then plots that are created in the variable AllPlots not gets scales except the first (never erased) and he destroyed me certain things such as zooming.

  List newdata As new List();
  
  Random r = new Random();
  
  < 6000;="">
  
  {
  
     NewData. Add (r.Next (-20, 45));
  
  }
  
  Data.Add (newdata);

  Hmm, a very strange problem. Unfortunately, I can't reproduce this behavior at all: I still see '2' for each parcel, before clear or after.

  I guess that you have run the example as-is in a new project, without any other change to match your real application? And that you use the latest version of measurement Studio 2015?

• Swap sides for the scales on the front panel and containers

  Hi all

  Very simple question here. I want to Exchange on sides of the balance on my Front Panel and specifically DSC container as a pressurized tank.

  It is very easy to do with a waveform table or chart, but seems to be impossible with tanks and reservoirs.

  It would be very convenient, especially for the process of DSC where I try to imitate the flow of process on the front panel and pipes could enter tanks of different sides.

  Thank you!

  Here is a tank with the scale on the right. Just took a few minutes with the control editor.

• adjust the scale of the waveform graph

  Hello

  I have a graphic wavefrom receives two signals, can I adjust the scale of the y-axis of a signal?

  

  Yes. You create a scale is double and set the plot of the new scale.

• The scale of the maps of intensity color ramp

  Hi all

  I use a graph of intensity to draw the characteristics of an ultrasonic field. The measured values expand a range between 3, 0e-6 up to 12, 0e + 0, then I need a very well detailed verry color scaling. I found a beautiful image (http://zone.ni.com/devzone/cda/tut/p/id/7664) joint as an image "colors ramp.jpg precise", where the band of colors is reduced by the black-> green-> white-> blue-> green-> red. But with the "color table generator.vi" caused by only three points of features for each of the colors red, green, blue, I get only a scale like on the second picture "rough color ramp.jpg. It is not possible to scale of the ramp from black to green to white, then again for blue, green, red.

  How can I get a color ramp as in "precise color ramp.jpg? I guess I need the possibillity of each of the red, green, blue nationally on more than three points.

  Thank you very much in advance.

  Hello...

  I found the solution in http://decibel.ni.com/content/docs/DOC-9294.

  The "Color Table" exit (U32 data type table) Create Gradient Color Ramp.vi can be connected to a node property graphic intensity with the property "color tbl".

  Now, the ramp can be fitted with various colors, for example now a color tone can be used twice on the bottom of the ramp and the middle or on the top of the ramp again.

  :-))

• How do I return the scales on the Mixed graphic Signal?

  LV 8.6.1f1

  OK, so I look at the relatively new chart of MIXED SIGNALS to fix things that don't work on the regular chart (more precisely, the weird cursor behavior).

  It seems I have a slider that spans four plots and reads an X 4 values of Y, that's what I want.

  But I need ladders on both sides.

  I tried to create the 2nd scale and the SIDES exchanged with her and got this:

  

  There is no ladder on the right?

  Or is it?

  These graduations few are a clue.

  I so stretch the right side of the chart and guess what?

  There is the scale:

  

  In other words, the new graphic scale left anywhere on the screen, even if I resize the chart horizontally.

  I can move the chart, the scale moves with him.  I can re-size on the left, and the left scale shows the same effect.

  It seems to me that graphic scales must be attached to the plot area.

  This graph is a TAB control, maybe the problem is related to this error of LabVIEW.

  Or am I missing something?

  Here is the code I ended up with difficultytowork around this problem.

  Mixed-Signal graph has ANOTHER problem where he completely forgets your assignments whose plots go on the scales, but that's another story.

  In my case, I've already placed the scales on the sides left / right as needed.  It's just that the right bottpm scale, really, really wants to be off to the right.

  What I do here, it's fetching the LIMITS of PARCEL of land #0 (the top one).

  I'm only interested in the left-right axis, I don't have a problem vertically.

  Also, I extract the AREA of scale 0-WIDTH WIDE.

  I then adjust the YSCALE. LEFT property of the four scales, place them where I want.

  The two scales on the LEFT are the BOUNDARIES of the PARCEL. -LEFT (WIDTH + 1 ON THE SCALE)

  The two scales on the RIGHT are to DRAW the BOUNDARIES. RIGHT + 1

  The "+ 1" means there are a pixel between the scale graduation mark and the border of the chart itself. I think it's better.

  Just run the VI once to run this code, then turn off the code section and save the VI. (You do not need to run it again unless something changes, he seems to remember where it is supposed to be).

  Of course, if you resize the graphic, you will need to run the patch again.

  

  

• How can I display only a part of the scale in the waveform graph

  This is the first time I try to use the waveform graph, since now, I used the table of waveform.
  The reason why I moved to the chart, it's that I need cursors.

  I have 2 problem

  the first: in the diagram, the graph moves when I add a new data and the scale of the x-axis stay the same size, in the right size I always saw the new data. How can I do that with waveform graph?

  Second: How do I say Labview to the day I click on the graph, I need that because when move graphic I lose the day, and to make I need to zoom out, I drag the imprecateurs.

  All this must be done programmatically. The LabVIEW graphic accepts tabular data, not only as the table and the graph doesn't have the ability to retain the previous points, like the story of a graph. You will need to retain previous values and then continually update the graph with the old and new values to get a shift register "chart as behavior. Cursors should be written programmatically re of each iteration, since you rewrite the entire graph.

• Need to change the scale to the default scale my resolution, but the ok button is not visible

  Original title: DPI scaling

  Need to change the scale to the default scale my resolution, but the ok button is not visible

  This help,

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/want-to-return-DPI-scaling-to-original-96-DPI-but/bd160079-c1e1-47F8-9727-2bc22892dfe0

• Profiles BlueTooth scale and the GATT

  Hello

  I use an example of GATT BlueTooth to activate connection with scale of Wahoo. The scale is the utility (after it is combined and registered in the BlueTooth settings UI). It lists several standard services and the other (0 x 1901) is not in any of the documents of the GATT on the site of BlueTooth.

  In addition, under this service, there are three characteristics listed, one of which is 0x2A1C, TEMPERATURE_MEASUREMENT...

  Now, since there is no profile of the GATT for WEIGHT, Wahoo using temperature profile of the GATT to pass the measure of weight through?

  I've heard of Wahoo. It turns out that the service of weight exist, but it is not official. Example of application of the GATT sniffed out correctly, but not could not name it

  (Not official)

• colours of the Rainbow on diablo?

  bought diablo battlechest.  Diablo plays with the colours of the Rainbow after opening, diablo II play not at all. I have a dell laptop inspiron 15.  Help!

  I only have Diablo 2, but--
  Install using the XP sp2 compatibility mode and turn off "composition of the bureau.
  To install in compatibility mode close the installation/Setup screen after the autorun of CD.
  Then visit - Start/computer and R / click on the DVD drive.
  Now click on Open - and R/click - setup.exe (or whatever the installation program is called. "It will be a .exe) - then properties and compatibility for XP - sp2 in this case.
  Check run... as administrator, lucky.
  Now start the installation directly from setup.exe.

  Install the patch-
  https://us.battle.NET/support/en/article/Diablo-II-patch-information

  The program below will solve the problems of color with Diablo 2. I don't know if this will help with Diablo.
  There is also other parameters such as the higher resolution.

  Glide3 to OpenGL Wrapper
  .

• How do I see the data of the scale in the oracle forums

  Hi all

  Please can you help how to display the scale data in oracle forums. Here's the requirement, need to display the weight of the scale in the forums oracle, system and the scale is connected by serial port. can you suggest me how to work on it. I won't use any requirement table (I want to say is: scale to table and table to the forums). We use oracle forms 6i.

  Thank you

  HI InoL,

  Thank you very much links you provided was very helpful.  We use ORACLE Forms [32 bit] Version 6.0.8.11.3. Frankly I have no idea how to start from scratch. Im working on it. Please help me later in the discussion. Thank you. We will come back to you with some details. Thank you Mr President.

• Chart: how to set automatically the scale of the axis Y

  Hello

  As you can see below, I have a truncated whith graphic bar, they go beyond the top of the chart, but traore are cut.

  For example, 'The Chatel Heath' has a value of 35.

  I want to the scale of the y-axis to be set automatically according to the largest value.

  How to do? I use APEX 5.0.1.

  

  Kind regards.

  Chipniz wrote:

  As you can see below, I have a truncated whith graphic bar, they go beyond the top of the chart, but traore are cut.

  For example, 'The Chatel Heath' has a value of 35.

  I want to the scale of the y-axis to be set automatically according to the largest value.

  How to do? I use APEX 5.0.1.

  

  The behavior of default graph is automatically calculate the scale of the axis, which seems to indicate that your existing chart settings are responsible for this. You use custom Axes or XML parameters in the table?

  Reproduce the problem on apex.oracle.com is the best way to get help with problems of this kind.

• Scale to the size of the image

  So I see that if I set the scale to the size of the image it dimensionnera my clips on import and I lose the high resolution... Sucks a bit

  Is in any way at all to the scale of the element when importing to the timeline? Final assembly used to do this, and it was awesome...

  I work with mixed 1080 p and 4 K images... So we are mastering 1080 p and whenever I shoot a clip of 4K I have to manually resize 50%

  Is it possible to automate this scale to 50%? The main reason I want to do with scale is some of the 4K clips that we have planned for crop... If default scale to the size of the frame that will mess up...

  Really surprised there is no easy way to do... I must be missing something...

  There is a way easier to do, but still not as easy as it should be.

  You can do a right click on the elements in the sequence and choose SETTING to the size of the image.  This will allow full resolution cropping.

  Be nice, if we didn't have that as a general preference, along the scale of intelligence.