Random failures Touchpad

Similar Questions

• I have my touchpad disabled, when the present mouse, randomly re touchpad allows

  My touchpad disabled randomly re allows, with my hung wireless mouse. usually at the wrong time like in the middle of a battle over a game making me do right or left clicks or other things I won't do. He also re active on a start or restart and works with the installed logitec mouse. opening of the mouse still once, that turns off the touchpad again.  so not a problem serious but embarrassing. If disabled, it should remain disabled.

  I made a few changes to my laptop boot order and the 500 GB hd was initially divided into 3 partitions. one for the operating system and two equal, when I arrived at 245? GB of data on my partition it didn 't' t use the other 245 and says the disk is full, in order to use the entire disk, I've merged the two partitions and afraid of possible complications, if I try to do a cleanboot.

  I did even with my computer windows 8, which has had problems with the update windows 8.1 do not restart after the update. I fixed it by changing the bios boot order, and now it works fine. and it restarts with all my previously installed programs and files still intact.

  So, if after what I did for my laptop I'm a little hesitant to make a cleanboot and possibly make my computer unusable. It shouldn't be a problem, but I don't want to take any chances!

  Thanks for your response have a great day!

  Steve

• I get random failures to load a page with the XML parsing error: entity not defined using firefox 4

  This didn't happen with the version 3 x, nor with the previous v4. Using the arrow to the left and clicking on the previous page request usually works ok. It happens several times a day. Full error is

  XML parsing error: undefined entity
  Location: jar:jar:file:///C:/Documents%20and%20Settings/shirley/Application%20Data/Mozilla/Firefox/Profiles/4txi20jj.default/extensions/ [email protected]! /chrome/bandwidthmeter.jar!/content/netError.XHTML

  392, column 33 line number:

  & netOffline.longDesc;

  I am also getting this error and have been able to understand that its caused by the Bandwidth_Meter_and_Diagnostics - 1.2.5.xpi. This deactivation seems to have stopped the error, but is a major nuisance.

• Intermittent "general failure" on ping traceroute

  Hello

  I currently have a problem with a windows 7 pc where I get random disconnects Internet.

  I replaced the cat5 cables and even installed a new pci network card.

  When I do a ping www.google.com t I get constantly answers but every 5 minutes or so I get a "General" random failure

  I uninstalled my antivirus and even turned off my firewall

  Any help on this matter with this would be greatly appreciated I'm at a total loss as what to try next.

  Thank you very much

  Howard

  Hello, Howard.

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  This problem may occur because of corruption DNS cache or incorrect network settings.

  I suggest you to clear DNS cache and check.
  Reference:
  DNS (Domain Name System): frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows/domain-name-system-FAQ#1TC=Windows-7

  Note: Please see the article "How can I clear the DNS cache?" in the article above.

  Please also read this article and check the issue.
  Reference:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• AJAX WebService is sometimes called default randomly.

  I have a problem with blackberry 6 & 7. My service calls Web fails just randomly without reason. Calls work. Much of the time that they are successful. But sometimes it's almost as if she does not come immediately.

  I've added a timeout element and disabled websecurity, but it's always a random failure. You guys have no idea of what I can try to improve it? It's really bad and I need help pretty quickly... Below I include some code snippets.

  in the config.xml file

  dansMon javascript file...

  function GetAssistanceProductsWebServiceHoezit() {
  
      showBusy("Retrieving Info...");
      $.ajax({
          async: false,
          beforeSend: function (request) {
              request.setRequestHeader("Device", reportingDeviceId);
          },
          complete: function () { hideBusy(); },
          type: 'GET',
          url: GetAssistanceProductsWsUrl() + '&SystemUserId=' + sessionStorage.userId,
          contentType: 'application/json',
          dataType: 'json',
          data: '',
          success: function (resultMessage) {
              sessionStorage.wasSuccessful = resultMessage.WasSuccessful;
              if (resultMessage.WasSuccessful == true) {
  
                  // do stuffs
                  hideBusy();
              } else {
                  var buttons = ["OK"];
                  var ops = { title: resultMessage.Heading, size: blackberry.ui.dialog.SIZE_SMALL, position: blackberry.ui.dialog.CENTER };
                  blackberry.ui.dialog.customAskAsync(resultMessage.Description, buttons, dialogCallBack, ops);
              }
          },
          error: function () {
              var buttons = ["OK"];
              var ops = { title: "Failed:", size: blackberry.ui.dialog.SIZE_SMALL, position: blackberry.ui.dialog.CENTER };
              blackberry.ui.dialog.customAskAsync(genError, buttons, dialogCallBack, ops);
          }
      });
      hideBusy();
  }
  

  Hi again. So after doing some changes and it looks like I fixed my problem.

  I used to call the ws on more calls. When I change that to pageinit. Looks like it works without any problem. I wanted to just say thank you for all your trouble to help me. If I still have problems, I'll post here again.

• Reset ends in white screen, no job options

  I have a MacBook pro 15 inch, start 2011 with always OSX Lion .on that it installed.

  Never did really of the software updates, since a few days ago. It was clearly a mistake. An orange, I got first screen, then white and blue. And after another implementation, it is even more possible to connect.

  I tried all the options people suggest online mode (shift) course, mode(cmd+r), vram(cmd+opt+p+r), only mode(cmd-s) and internet recovery mode recovery. (cmd + opt + r).  I continue to ending on a white screen just after the Apple logo.

  -Safe mode = never got in front of a white screen;

  -recovery mode = never got in front of a white screen;

  VRAM-= think it worked because the sound of the chimes was stronger after;

  -Single mode = Can get all the time; but sometimes blue with white letters, then the next restart custom works for sure.

  -Recovery Internet = Ethernet cable and the world appears but only managed to reach the second screen once.

  opt + D (material check says that there is no problem with my hardware)

  I managed to reach the login screen a few times with lots of fsck - fy and restarts... But quickly dropped again after the login. At each time it failed, the Apple logo was a blue tint and I managed to reach the login, the logo was gray.

  Yesterday, I managed to reinstall OS x Lion with restoration of the Internet, the first time I got to the screen with the options.

  I worked very well with a bit of Internet and Excel. Then I wanted to reach the Java Control Panel in system preferences to check if the problem was Java. It crashed.

  Managed to connect one more time and I tried to update Java in the browser instead of system preferences. It crashed. HARD.

  After restarting, no option no longer works with the exception of the screen in single mode; but the screen is blue with white letters, so I don't know if I'm able to reach the login screen more.

  I already tried many things and I'm afraid, I only make worse it.

  I think the problem is the Java framework or the video graphics drivers. Rather the software associated with that material, but I don't know more.

  Someone knows what to do?

  make an appointment at the genius Bar to be sure that you have these questions:

  https://www.Apple.com/support/MacBookPro-videoissues/

  Your Mac MUST meet all THE requirements of the program to cover. It must be in the correct date range and must be able to run the diagnosis of VST and fail to be covered by the program.

  Mac that don't meet ALL the requirements (such as Macs who cannot run anything) is generally considered a random failure.

  They are not trying to squeeze every penny from you like car dealerships. Apple wants you to be a customer happy, if possible. The store manager can have additional flexibility to allow outdoor program repairs or provide repair cost if you don't finish eligible under the program.

• Unable to connect to the printer - HP photosmart premium c 410

  Macbook air OS x 10.9.5 using

  Printer and macbook show good wifi signal.

  Did the disconnect/reconnect the two devices and the comcast router.

  Check the "share printer on the network", on and outside.

  The printer works sometimes and at random.  Example: trying to print a Word document that has failed, but sometimes from one day to the next, the document printed.  Spookie!  But above all, the printer will not connect.

  Problem started after the two aircraft had been disconnected for a few days and move while some construction was conducted at the scene.

  Is there a setting that needs to be found and reset?  Could any dust, etc. of construction altering the router?  Please help, preferably with a simple solution.

  Thank you.

  arze1905

  Hey @arze1905 ,

  Thanks for joining us on the HP Forums today, hope you enjoy your time with us!

  If my name is Zac and I'll be your support agent to 1-1 for the same problem! I understand that you have recently moved the printer and the computer autour due construction and since the move has been random failures of printing and printing slow (like 12 hours later slow). Looking for help and I will do exactly that.

  So when I looked through hp.com I came across this "Slow printing" document that addresses the issue with the 10.9 Mavericks and other operating systems, and it seemed like the best place to start. So if you could please go through it and follow the steps and let me know how it goes it would be great! They are very descriptive and easy I promise you.

  Here is the link! Of printing to your printer HP are stuck in the print queue: v10.10 OS X Yosemite, OS X v10.9 Mavericks and v10.8 OS X Lion of mountain

  Get back to me and let me know how it all happens! Have a great day and wonderful / safe from holidays!

• Satellite A200 - hard drive not recognized

  Hello. Deploy a satellite A200.

  Original problem would not initialize only power light and hard drive light came on a second, nothing on the screen, not access to the parameters of F2. Reinstall memory, no go, deleted the test and drive hard and read disc hard ok in an external enclosure. With disk hard deleted computer will start after market boot disk and running program diagnosis ok. Can now access the settings of F2.

  Format external hard drive, reinstall and start with the startup disk, hard disk appears in the bios, the test runs diagnostic ok.
  Tried to install Windows XP and XP pro and windows twice starts to install and then comes up with an error saying there is no hard drive present, even if the Bios and a diagnostic boot disk at the same time recognize the hard drive.
  Tried another hard drive with the same problem, not recognized.

  Any ideas?

  Hello

  Have you tried to reinstall Windows using the Toshiba Recovery disk? Normally with this record everything should work fine because it s pre-tested and specifically designed for your laptop.
  Check this box!

  In the worst cases, your HARD drive is faulty and you need a new. The HARD drive seems to have random failures.

• Affirmation of its USB - El Capitan

  10.11.3 OSX

  Logic Pro X 10.2, 10.2.1

  I continue to receive global seemingly random failures when using audio devices, or USB (CoreAudio) audio devices with lots of tracks to WAV, or 2-3 hours of playback of iTunes.

  I only see kernel errors if I run the Console as a user admin! not my normal way of working.

  These are typical log entries

  System.log:Feb 3 11:58:35 iMac kernel [0]: affirmation of its USB in /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleUSBAudio/AppleUSBAudio-302.15/AppleUSBAudioStream.cpp on line 4875

  System.log.0:Feb 2 19:09:39 localhost kernel [0]: affirmation of its USB in /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleUSBAudio/AppleUSBAudio-302.15/AppleUSBAudioDictionary.cpp on line 112

  System.log.0:Feb 2 19:09:39 localhost kernel [0]: affirmation of its USB in /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleUSBAudio/AppleUSBAudio-302.15/AppleUSBAudioDictionary.cpp with return 0xE00002BC on line 3172

  System.log.0:Feb 2 19:09:39 localhost kernel [0]: affirmation of its USB in /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleUSBAudio/AppleUSBAudio-302.15/AppleUSBAudioDictionary.cpp with return 0xE00002BC on line 1676

  System.log.0:Feb 2 19:09:39 localhost kernel [0]: affirmation of its USB in /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleUSBAudio/AppleUSBAudio-302.15/AppleUSBAudioEngine.cpp with back 0xE00002BC at line 1759

  all CoreAudio. Interfaces USB directly connected to the Mac, not a hub. Several, different cables.

  The log console you provided something with OSX Bell indicates himself and not logic... and shows a USB audio device has problems during communications for OS X...

  Not all audio devices play well as... especially the software aggregates those when they have not been updated or are not fully compatible with the current version of OS X used... but also some hardware ones in certain circumstances.

  Then...

  First...

  Using a router Audio Soundflower or Jack for example...? If so, uninstall and test...

  If your device drivers audio use are completely up to date and consistent with 10.11.3?

• OfficeJet 7500 has firmware

  My 7500 has worked just since I bought it. A number of errors appear get flashed upwards several times. In all over the past 2 years I only managed to print 7 pages around. Because I was busy, I simply bought a competitors printer which worked perfectly.

  Now I have time to work on it, I've checked everything I can physically on the device - nothing works.

  My best guess is that there is some faulty firmware in the machine that detects failures where none exists.

  Someone at - it on the other made a firmware update (if possible)? Or should I chuck just the machine into the bin and stick with the competition?

  Problem identified.

  On the motherboard hidden deep inside the work is a battery of small discs - this was not causing the machine to identify random failure modes.

  However, in order to get to this point, I had to disassemble the machine completely.

  While I was doing this, I noticed large pools of ink inside the printer. HP clearly knew this problem because the volume around the print head parking area has been filled with wadding of absobent. This explains why the machine seems to "drink" expensive ink.

  Very bad HP at the failure of the design in a home user machine cost (UK£ 500, $ 800 two years ago).

  Because of this sloppy design and bad workmanship, I decided enough was enough and the machine is now in the bin.

  I buy HP Desktop again? I will recommend HP to friends and neighbors? AM I impressed with the help of HP?

  I do not.

• Dv5000 troubleshooting

  I have an old laptop DV5000 since mid-2006 who worked at random and I'm trying to circumvent the problem. I'll try and keep this short ish since I could go into great detail about every little thing, but will try and cover the main things first and let support fine tune from there.

  At one point, I left my father use it as a PC at home but it was left closed and had a monitor/keyboard/mouse all wired. He was left on 24/7 im not sure for how long and whether froze one day or we close to disappear for a few days, and when the questions return began. Anyway once he had a problem, always there for the start.

  Basically it would not suddenly turn a day in front of a black screen after trying different times and ways, I finally managed to do start a few times, most of them he would freeze during loading of windows, once connected, or a few minutes in the office etc. I had a pretty long time to shoot the files I wanted out of it. It was a few years ago.

  I did research at random times on any bugs and one day decided to try to make it work again. Same issues happen it does not start either, it starts and crashes, or most of the time it actually starts to something, but it will eventually just kill all black screen and still have the keyboard lights on and fans running I think. When I started trying to reinstall the ram, he seems to have better results (always removed power and battery by). At any given time, I could make it work for a few days, if it crashed / have frozen or had problems, the only way to start again would be to reinsert the RAM, I think that I ended up swapping the sticks the same slots.

  He worked for the most part, but I think that whenever I made a full stop, he would go back to stubborn and does not until I reinstalled the memory, sometimes it required also me to reinstall the HARD drive, or that the extra step was sufficient to get it working again. Either way I remember it never works well for some time, normal shutdown and restart sometime later and be 100% for this period. At best, I could remove a reboot and it worked sometimes, but I don't think that a complete stop never again come online without messing around with memory.

  I remember to test antivirus, software spies, maleware, etc and come clean, I also did a test disc HARD BIOS, the short test passed, and I think that the long test claimed be like 100 minutes after 180minutes and he says another 50 or 60%, I thought that it froze and it cancelled. I read somewhere that the BIOS should have a test of memory too, but I didn't. It doesn't have a tab diagnosis, just a tool of those who took the test only HARD drive. I have not tried memtest86 or whatever it is to test the memory, which I think is the main problem or maybe a power outlet.

  Also only once out of many many restarts and attempts to tinker with him I said black screen

  "Windows was not start because the following file is missing or damaged:

  \WINDOWS\system32\config\SYSTEM

  You can try to repair this file by starting Windows Setup using the original Setup CD-ROM. Select 'r' in the first screen to start repair. »

  I could take a picture with my phone and have it always, I never do a repair, I don't remember if a reinstallation of the HARD drive fixed or what, but of course eventually fine bootted. Once again it happened only once. He may have got a BSOD every now and then too, but I don't remember for sure. Most of the time, it was the random failure and no chance to easily make it work again immediately.

  Finally, it seems does not not even with memory or HDD relocation. Same case it would rise to a black screen or a lock at various points. I then put away for a while yet.

  Today I pulled it back to try again. This time, I left only 1 stick of RAM in (I don't remember if I tried this before or not) and the battery, also left its functional summer for me well outside the door, but very slow. Also, I decided to try some tools and takes screenshots of the info. I did Crystaldiskinfo to see if the HARD drive was ok and I don't know how to read all the lines, but he said not good and I can post the screenshot if there is a way to download here. I also got to test the temperature of the cpu Core Temp and it was 45 c idle and as 61C full or almost full load according to Core Temp. These are not cool by any means, but I know always felt deep down so maybe its normal for laptop computers of this time or this one, I know it's a safe area at least hot on the first day.

  That everything is recommended to test and fix the problem since I know he won't only to work 100% all of a sudden.

  (1) can weigh us the battery as a problem or should I continue to keep only to limit variables?

  (2) should I try with the other stick of memory RAM in the same location as the one currently to see if its only 1 stick or try this running stick in the slot 2 to test the slot machine random?

  (3) I have try running Memtest86 or another program like this? (I have never ran before would have to read) Memory or the plug is always my main guess as a failure.

  (4) the chances whether the HARD drive?

  (5) what other info I can provide to make it easier for you?

  Thanks for your help.

  Hey @MrtBahgs ,

  Welcome to the HP Forums!

  Looks like you have some teething problems. I am tempted to believe that you are dealing with a memory or a HARD drive problem, as you have already said.

  With regard to your first questions of the post:

  (1) we can exclude only the battery if you are able to use the same laptop with the battery and not on current alternative.
  (2) try all possible combinations of RAM and DIMM slot. Check the differences in performance and priming. (No boot is not a real word... but it should be!)
  (3) Yes. Run Memtest86 with the two cards.
  (4) check the HARD drive like this: start Notepad in safe mode with command prompt. In the command prompt, type the following command - chkdsk /f c: - this check the HARD drive FYI corrupted or bad sectors and try to fix them. Repair requires the drive is locked and may ask you to reboot, so it can properly repair. If this is the case, do.
  (5) you gave me a lot of information and I salute you for that. When you use a support forum, there is no such thing as too much information. Always better to have and not need, need and did not.

  You can also try to save your info on an EHD, or by plugging the HARD drive into a desktop PC (adapter cables are required). The best way to backup is to copy the contents of the folder C:\Users (or whatever it is another important). Once you have backed up your important files to reinstall the HARD drive in the laptop (if you moved it to a PC) and perform a full system recovery.

  Let me know if it works for you!

• Failed hard drive, HELP! I want my data of user account

  My hard drive failed last Saturday (September 3) and local repair technicians told me it was a critical failure because she refuses to boot into Windows no matter what. The drive itself ran Windows XP Pro (SP3) and was in perfect health until this random failure.

  I can still read its data if I connect to another computer and treat it like a disc Add on, so I took the oppritunity back up all my data and program installers who have survived in a temporary folder on the other computer. The only thing I want now is my data of user such as custom settings account, that I had.

  Where Windows stores my custom settings of data of the real of the user (desktop theme, desktop wallpaper settings, settings of the record, things like that)? So I can upgrade to Windows 7, I want to be able to migrate the information from my account in XP as well, but obviously I can't do the normal with the Windows easy transfer program track if I can't get my boot drive in Windows.

  I finally got all the stuff I needed to get my computer running under W7. I also transferred what data I could off the old drive as an external slave coast. So I got what I needed.

  It turns out that files AND Windows 7 itself modern motherboard BIOS seems smart enough to identify a failing hard drive. They both harassed me that he is basically junk and I have to back up what I have on this matter as soon as POSSIBLE. That and I certainly couldn't coax the wrong disc when starting windows. However, I copied what I needed. So I can't fix it or use it further.

• My computer crashes! -unknown error checking

  The computer is a Microsoft Windows XP Professional. It is rather more older (2005) and was not up-to-date or online until a few years ago. (Mainly used for games.) However, it is almost unusable now, because it hangs on a consistent basis.

  There are several different problems. The most common one is a random stop that occurs out of the blue. Most of the time it restarts and reports "system has recovered from a serious error." These error reports are different and do not have a common denominator. Sometimes they are corrupt. Other times, the computer is simply blank after the accident. the monitor to fall asleep and the tower still running.

  There is also a 'frozen' system that occurs just after the start. He reached the office but does not do so. Sometimes the keyboard and the mouse still work, but I can't click on anything. (I'm usually off manually after these two problems).

  I would include all system information I could, but unfortunately I can not turn on the computer for trouble right now. When I turn it on, the screen simply says "VGA status: no Signal input." It is like that for ever until I have turn off manually. (It's happened and I will continue to try to get it started). I tried safe mode; seems to work very well. I tried a clean boot this morning; It starts fine but after I put it in sleep mode, it is dead...

  I'm lost as to what is causing all this. This random failure has been occurring regularly for more than a year. Some days it hangs constantly and there are days when it works quite well. I tried every virus program, running the check disk, fragmentation and the installation of each update available. Nothing seems to help or give me a clue as to what is wrong, because when the computer is not crashing, it works perfectly fine!

  There are also several non-plug-and-play devices that have a yellow warning sign next to them. They all have the letter K and the other numbers to them, with the exception of a device series. They all give me code 24 (this device is not working properly or is not all its drivers installed, or something like that.)

  I would point out that the computer had viruses and Trojan horses on it, but I think they have been removed. I have Microsoft Security Essentials, Malwarebytes, and SuperAntiSpyware on it.

  In addition, there is an annoying tendency of balloons popup that warn me that firewall Windows has been disabled. Half the time, I opened the firewall and it is on. The rest of the time I have to manually turn it back on. Any idea what could be the cause?

  And regarding "recently installed programs" that could cause this problem of crash, it is impossible, because he does this for years!

  Sorry for the length of this. There are a lot of problems with no real information. I wish I could provide more data and I'll try to when the computer is running again, but I don't really know where to start. I hope that's not a failure of the motherboard or something...

  I'm very happy for any kind of help!

  Hello M & Mmpty,

  I took a glance at the last dump.  It was a stop 0x8E.  From what we see in the landfill, MPFilter.sys seems to be the culprit on this one.

  It is a component of Microsoft Security Essentials.

  Here is the stack of debugging information.  As you will see, MPFilter is at the top of the stack:

  STACK_TEXT:
  WARNING: Information not available stack unwind. Sequence of images may be wrong.
  efa25938 f2057082 8606d57c efa25988 00000040 MpFilter + 0x117e0
  efa25964 f728fef3 8606d57c efa25988 00000040 MpFilter + 0xc082
  520 520 fltmgr 8606d 00000000 0006d f7292338 efa259cc! FltpPerformPostCallbacks + 0x1c5
  efa259e0 f7292867 8606d 520 85e58de0 efa25a20 fltmgr! FltpProcessIoCompletion + 0x10
  efa259f0 f7292ef9 85fc 8020 85e58de0 8606d 520 fltmgr! FltpPassThroughCompletion + 0 x 89
  efa25a20 f729f754 00000000 00000000 fltmgr efa25a40! FltpLegacyProcessingAfterPreCallbacksCompleted + 0 x 269
  efa25a5c 804ef19f 85fc 8020 85e58de0 85e58de0 fltmgr! FltpCreate + 0x26a
  efa25a6c 8657e9c8 80583220 85eed4b4 efa25c04 nt! IopfCallDriver + 0 x 31
  efa25b4c 805bf488 8657e9e0 00000000 85eed410 nt! IopParseDevice + 0xa12
  efa25bc4 805bba14 efa25c04 00000000 00000040 nt! ObpLookupObjectName + 0x53c
  efa25c18 80576057 00000000 00000000 00000001 nt! ObOpenObjectByName + 0xea
  efa25c94 805769ce 011fedb8 011fed58 80100180 nt! IopCreateFile + 0 x 407
  efa25cf0 805790d 8 011fedb8 80100180 011fed58 nt! IoCreateFile + 0x8e
  efa25d30 8054167 011fedb8 c 011fed58 80100180 nt! NtCreateFile + 0 x 30
  efa25d30 7c90e514 011fedb8 011fed58 80100180 nt! KiFastCallEntry + 0xfc
  00000000 00000000 00000000 00000000 0x7c90e514 011fedb0

  The standards of antivirus, it seems to be enough old-April:

  1: kd > lmvm mpfilter
  start end module name
  f204b000 f2071800 MpFilter T (no symbol)
  Loaded symbol image file: MpFilter.sys
  Image path: MpFilter.sys
  Image name: MpFilter.sys
  Timestamp: Sea APR 06 13:25:55 2011 (4D9CB033)

  I would recommend the following: measures:

  1. Download the latest version of Microsoft Security Essentials.
  2. Uninstall the current version.
  3. Reinstall the freshly downloaded version.

  Let us know if you have any questions about it.

  I will consider other landfills shortly.

  Best regards

  Matthew_Ha

• My Media Center is still broken. The notice of recovery, I have to fix was less useless.

  I followed all the instructions given to me to attempt a repair of ehRec.exe. These instructions took the time to follow, but in the end, destroyed my software Windows completely. I have re-installed Windows from the installation disc (which did not include a codec MPEG2.) I got the ffdshow codec, kind of works. However, even after a reinstall complete ehRec.exe is always (occasional) broken, that my media center crashes more than half the time, I try to use it, and almost always regular for registration fails. Is it possible that maybe some Microsoft fix caused the problem? I know by looking at other forums that I am not the only unhappy camper in Media Center.

  I am very pleased with the notice I received. The instructions regarding the use of sfc were simply wrong and the instructions on how to fix my problem were probably just fake too. For example, I don't think you can do a repair installation, unless you have an up-to-date installation CD 100%. Certainly, that didn't in my case and left the system in a State that won't start plu. I start to wonder if your procedures have been tested on real systems with older installation CD and upgrades and random failures since the initial installation.

  On another thread, kkwriter (a user, no Microsoft technical support) gave me an answer to this problem:

  Media center and client .net 4 are not compatible. Remove .net 4 and the media center problems disappear. (Ignore the warning that some programs may break if you remove .net 4 when uninstall you.) Some might, but none that I use.)

  There are probably a lot of people with the media center problem. It's too bad Microsoft does one.

• What material would keep ramdomly turn off the computer and then restarting him?

  OK, I completely re-charge this machine, but it still keeps randomly turn off and restart... someone has any suggestions other than "TRASH IT"?  I'm about to.  Can not get up-to-date, because of this random failure and reboot.  What do you think?  Please answer.  It is a bridge of 2002.  Thank you.

  David

  SWV

  "Southwest vidéo" wrote in the new message: * e-mail address is removed from the privacy... *

  OK, I completely re-charge this machine, but it still keeps randomly turn off and restart... someone has any suggestions other than "TRASH IT"?  I'm about to.  Can not get up-to-date, because of this random failure and reboot.  What do you think?  Please answer.  It is a bridge of 2002.  Thank you.

  David

  SWV

  Overheating is probably possible.  Check that the fan is working OK.  Also, make sure that the vents are not blocked. If they are blocked by the accumulation of dust, buy a can of compressed air in a computer store to blow off the dust, etc.

  In addition, make sure that the cards any plugin (video cards, etc.) are securely fixed in their media.