Re: Stucks after startup

Similar Questions

• iPhone 6s is stuck after iOS update to 9.2.1.

  My 6 s iPhone is stuck after iOS update to 9.2.1. Laminates to 9.2 & the problem still exists. If someone has had this problem before and how it was resolved. Need help!

  Hi ahamedrzk,

  Thank you for your participation in the communities of Support from Apple.

  If your iPhone 6 is stuck during startup, try the following steps from your iPhone, iPad or iPod touch does not respond or won't turn on:

  If your device turns on but hangs when starting

  You can see a blue or Red Apple logo screen for a long time during early upward. Try the following steps:

  1. Connect your device to a computer and open iTunes. If you don't have a computer, you can borrow one, or go to an Apple Store or service provider authorized Apple for help.
  2. When your device is connected, force it to restart. Press and hold buttons sleep/wake and Home at the same time. Don't release when you see the Apple logo. Keep now until you see the Recovery mode screen.

     

  3. When you have the ability to restore or update, choose update. iTunes will try to reinstall iOS without erasing your data.

     

  iTunes will download the software for your device. If it takes more than 15 minutes, your device will exit Recovery mode and you need to repeat steps 2 and 3.

  All the best.

• macOS Sierra hangs after startup

  I have a macbook pro 15 inch mid 2014 retina

  After that I installed macos sierra my macbook freezes after startup for about 10 min before things become normal after shots completely from the OS, I tried the P + R command cmd startup items cleaning + option and I checked the ram which is normal usage, but none of the above has worked

  It seems that this problem also affects slightly the time of normal startup of windows on one present on my bootcamp

  Stop

  Disconnect all external devices

  Restart in safe mode

  Try safe mode if your Mac does not end commissioning - Apple Support

  then restart normally, yet disconnected devices.

  If the problem persists, you can view a report of etreceheck for later analysis

  www.etrecheck.com

• Slow to open the first time after startup apps

  Slow to open the first time after startup apps

  How about, the second time, that is, close and reopen?

  Also download and run Etrecheck.  Copy and paste the results in your response. Etrecheck is a diagnostic tool that has been developed by one of the most respected users here (and recommended by Apple's Support personnel) of the CSA to provide a snapshot of the system and help identify the most obvious culprits that can adversely affect the performance of a Mac.

  

• MacBook pro gets stuck after 6 minutes

  I got my MacBook Pro for about 4 years. Everything was fine until a few months ago. There is some ongoing work on utilities in front of my house and the workers accidentally done something to mess up my internet connection - cut a wire or something? In any case, I told them and fixed it. Then, my MacBook Pro started having problems.

  It gets hung up or stuck after about 6 minutes of work. It does not seem serious if I work online or offline.

  The strange thing is it only happens at my house and it only happens with my MacBook Pro. My iPad and iPhone, both work very well for me. My MacBook Pro works great everywhere else. Other MacBook works very well for me. It of like my MacBook Pro is trying to do something specific, or to run a program only when it is at home and is then stuck.

  I took it to the Apple store and a third computer repair place to party, but it still works very well in these places and they do not find what is wrong.

  I don't know what to try next.

  Help, please!

  Note the time of the next frost. After the reboot, open the Console app in Finder > Applications > utilities and look for entries of the log at the time of freezing. Suspicious message here.

• My Disk Defragmenter Hangs After startup

  My Disk Defragmenter Hangs After startup.  I tried to use the microsoft fix it Center automatic troobleshooter for the maintenance of the system determine the cause and got an error code 0 x 80040154.  He only "worked" on windows update and the update to fix issue still exists.  I'm trying to find out what means error 0 x 80040154 and how to solve the problem.

  Hope that gives you enough information.

  Hello

  (1) operating system do you work?

  (2) which Fix - it applied?

  (3) what is the exact full error message?

  Try the following methods and check the status of the issue.

  Method 1:

  Run a scan of the file system checker and check if it helps.

  http://support.Microsoft.com/kb/929833

  Method 2:

  Check a drive for errors.

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  NOTE: This task might cause loss of data on your computer. It is recommended that you back up all data and files before performing this.

• My computer constantly freezes after startup

  Original title: System Hang

  My computer freezes after startup or during startup. Whenever I look at the problems and solutions in Control Panel, it says that my nvidia graphics driver has stopped working properly and should be updated but I checked and installed the latest version. What else could I try? I would appreciate the help as I have had this problem before and it stopped for a while and started again.

  Thanks-James

  Hello

  Yes, different drivers depending on the graphics card which is present in the system. I suggest to check the link below and download the drivers that are present in the link.

  Vista 32 bit

  http://www.nvidia.com/object/Win7-WinVista-32bit-266.58-WHQL-driver.html

  Vista 64-bit

  http://www.nvidia.com/object/Win7-WinVista-64bit-266.58-WHQL-driver.html

  After having tried the steps, let us know if the problem is solved or not.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• General failure on Ping and TraceRT by WAN IP for 15 minutes after startup

  My Windows 7 64 of Profession will expose this problem.

  After startup, it cannot access anything whatsoever outside the local network.  I can ping, DRC and usually access anything whatsoever on the local network, including the router.  But trying to access what anyone outside the LAN does not work.

  Ping Returns the Timeout on the first response, and then general of failure for the other three.

  Tracert immediately returns a general failure

  I am ping IP address, no domain name, is not a DNS problem.

  After 15 minutes or, the problem resolves, and starting the machine works fine.

  Occasionally (once a day or more), it will return to the problem of General failure for 15 minutes, then return to normal.

  The problem does not occur in safe mode with network.

  The problem occurs whether the user is logged on the machine.

  I have disabled the Windows Firewall to try to resolve, without success.

  I also installed McAfee.

  Thanks for any help that anyone can provide.

  CP71

  I would start by removing McAfee and using MSE at least to test.  You can not just disable McAfee, it should be removed and he is known for this type of problem.

  McAffe often contributes to BSOD

  
  

  I remove and replace it with Microsoft Security Essentials

  
  

  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  http://www.Microsoft.com/security_essentials/

• BDP-S580 white screen after startup

  I've owned my player for several years and had zero problems with it.  However, it now turns off after startup.  I see the sony blu ray logo, then the next screen has the blue streak fell on it (I call it the loading screen) and then the screen goes white, and the signal is lost.  On the real player, however, everything looks normal.  The display shows the home page, it responds to the remote control to open and close the drive.  If I touched the game, I get the meter to display and advance but I get no sound and no video on my tv.  Indeed, after a few minutes my self to stop the countdown appears and turns off the TV because no signal detected.  My audio system (which is connected between the player and the TV) shows as it loses the signal dropping HDMI icon which is initially present when loading the blu - ray player and the logo screen is present.  Any help would be greatly appreciated.

  Oh dear, my apologies!

  I give this advice to so many people, I forgot that you actually wrote, sorry!

  I noice that you have your BD player that is connected to your audio system, can you give me the make and model number? Alternatively, you can try to reset this device if possible. Also please be sure to check that your HDMI connection wires are firmly held down, sometimes they come loose over time.

  Another suggestion, that you can try is to turn your BD drive and unplug the power supply for a few minutes before you reconnect the power and turn it back on again.

  If the issue is not fixed please visit this link below and perform these troubleshooting steps, please not, some are model specific and does not apply however it is recommended that you try to change the screen resolution by following these instructions.

  There is no picture of a Blu - ray disc player and the screen is completely black or flashes.

• Photoshop crashes soon after startup. How can I obtain and present the crash log? When I go to 'Help-> Adobe product improvement Plan' nothing happens.

  Hello

  I'm having the problem that my Photoshop CS6 always crashes soon after startup. I use no plug-ins, and my PC is in good health. I would like to present a crash log if someone can tell me what the problem is, but when I go to 'Help-> Adobe product improvement Plan' that I read is where crash logs are produced nothing happens.

  I also have a question my Premiere Pro hangs at startup upward. I have these two programs were widely used in the past but have recently started having problems. I have already uninstalled and reinstalled CS6, but the problem persists.

  Any help would be massively appreciated.

  Chris

  Thank you. The crash log tells me that you have not updated Photoshop CS6. It should be 13.0.1.3 not 13.0.0.0

  Either run help > updates or download and install it. Adobe - Photoshop: for Windows

  ig75icd64.dll is a display driver.  Go here and to update: Intel® Driver Update Utility

• The Alienware 14 laptop fan after startup noise

  Hi I was wondering if anyone else has suffered from this problem.  Recently around 2/11 ~ 12/02/2015, I noticed that the fan in my Alienware 14 would become really strong about a minute or two after startup.  This would be accompanied to the Alienware keyboard and touchpad lighting.  It only lasts a few seconds and the fan and light back to normal for the rest of the time I use it, even if it is several hours or more.  I think the same happens shortly after waking from sleep, but I'm not sure.

  I cleaned the vents to the best of my ability to compressed air, update the BIOS to A09 (latest version) and update the graphics drivers Nvidia Geforce 750 M and Intel HD 4600 graphics card.  I also ran full scan of the system AVG 2015 and not confirmed any virus/malware.  Also checked the task at Startup Manager to see if any unusual process have been the cause and find nothing unusual.  I also used the restoration of the system to a point before that I noticed something (2/10), and the noise of the fan always popped up.

  Attempted to run Dell Diagnostics and support help, but they have not found any problems.  Interesting note - when executing the analysis of their system to see if my drivers are required to update, it says that I need to download the BIOS A09 exe even though I already A09.

  Use Tech Support Chat or by e-mail, but 14 Alienware is apparently not one of the products covered by them.

  Thanks a bunch!

  Hi Mick,

  You might be interested to read here

  http://en.community.Dell.com/Owners-Club/Alienware/f/3746/t/19617992?pi21932=1

  Annoying bloody!

  Hope this helps

• M300 stuck at startup after execution of Toshiba Upgrade Asst

  Hello

  I just bought a copy of Windows 7. I ran the Windows 7 Upgrade Advisor, and he recommended me to visit the Toshiba page, where I found the link to download Toshiba Upgrade Wizard to prepare my M300 Satellite upgrade to Windows 7. I managed to download all the software needed. Everything worked fine until the part where the Assistant is to install some components and restarted my laptop. Has been through the usual procedure to initialize the operating system and there was this screen "Please wait...". "just before the login screen, and the screen seems just run forever. I tried to keep running for more than a few hours, but the Vista screen was still there, under the wording "Please wait".

  I tried to boot in safe mode and managed to enter the office. I was able to run complete the Toshiba Upgrade Assistant of safe mode, although I noticed that there were not any components that were required for the installation. Ethernet controller was strangely absent. Unfortunately I can't install Windows 7 in safe mode.

  Is there one solution other than to cut it down for the after-sales service?

  As much as I know Portege M300 is not covered by this program to upgrade to Win7.
  Am I right about that?

• Vista stuck on "Please wait" after startup

  I have a laptop Toshiba A300 nine, with vista installed at the factory.
  After a few windows automatic updates, on reboot, vista will load and that
  ever present on the screen 'Please wait '.

  I see a disk activity. However, even after 30 minutes, he can't login screen.
  In safe mode, I have disabled the service of .net framework, but it did not help.
  I tried to use the ntbtlog.txt to learn about what his impasse, but could not understand it.

  Cause any ideas on how to diagnose the root, or even better, a solution will be very appreciated.

  Hi dbbd,.

  Thanks for the answers on the community forum.

  This seems to be defined as you said it happens after a reinstall of ITUNES.  Why don't you try not running through the steps in a clean boot process to determine exactly what conflicts with this configuration.

  Try step 1 clean boot and see if you get the error, otherwise go to step two, then step 3 and step up to the process that blocks the start is identified.

  Article for the clean boot - http://support.microsoft.com/kb/331796

  After you completed the steps in identifying the issue, please be sure to follow the procedure described in step 7 to bring your system back to a normal state.

  Thanks, keep us informed on this issue of what is identified as the conflicting service.

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer now put in hibernation, Vista will not boot. Computer stuck on black screen after startup. Help?

  I put my computer on 'Hibernate' when I went to bed. When I woke up, I started the computer learned to manufacturer (HP) computer screen introduction as usual, but windows doesn't not load afterwards, as he usually does: I just get a black screen. Lights supply and all the rest are on. Just nothing happens. Any ideas?

  Can I use the firmware from HP (I guess that's what it is) to confirm that my memory and hard drive are very good. I tried Googling the problem, and some signs indicate a problem with the powercfg parameter. I can't get in cmd.exe to reset because I can't get into windows (although through HP firmware, I can enter in "Administrator: X:\windows\system32\cmd.exe - cmd", which seems the same, but the orders that I see offered on websites do not seem to work - help?). Ditto with Safe Mode. I don't have Vista installation disc.

  Any help is very appreciated.

  Hello

  You need to contact HP and install recovery disks command to perform a repair.

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=us

• 3 beeps after startup chime then nothing

  Hello

  My iMac intel (2011) was working fine earlier today.  Then I came back to find it on the gray screen with the apple logo.  I tried to restart it, and it became stuck on the gray screen with three loud beeps, after initial startup Gong.

  I tried resetting the PRAM, re-sitting my RAM (it's the RAM of origin).  It does not start in safe mode.

  I used the built-in Apple hardware test and it has detected an error with the following message:

  4MOT/4/40000003: DRIVE HARD-1268

  I ran the test again and got the same message error but with 1283 rather than 1268.  Is it a hard drive failure?

  Any ideas how to proceed?  Thank you.

  The error is specifically for the hard drive fan motor, but as the fan is controlled by a circuit in the HDD it is more than likely a failure of the hard drive. I saw most of the errors 4mot have had a faulty hard drive.