ReadyNAs 3138 nor detect whith RAIDar

Similar Questions

• ReadyNAS Duo v2 found by Raidar, but cannot access

  I moved last week and when I created my readyNAs to the new location with a new ISP, Raidar sees the diveice, it's IP address, mac address, hostname etc but I cannot access it somehow. Any suggestions?

  Thanks a lot, StephenB and all other respondents. Had the SIN back tonight and very happy!

• Power light flashing ReadyNAS Duo

  Hi, I got a ReadyNAS duo of one of my friends, I have replace both drives of 1 TB with a same exact. I booted up the SIN and it showed on the tool Raidar. I got 'corrupt boot' so I followed the steps on the site Q & A. I did a restore and reinstall OS. But now the power button blinks only. As his starter, but he just "hangs", been like that for a few hours.

  I also had the Disk2 light light upward, and I've been like this for a day. But nothing happened. So I got the power (tried to turn it off using the power button) nothing happends. So now its onl flashing on the power button.

  What can I do to make it work?

  Any help is very appreciated!

  Nothing, it appears not didt.

  However what I did to start the nas in the boot without all the drives menu. Then he would detect in RAIDar. Once I could detect the NAS in RAIDAR, I have it turned off. My drives of 1 TB to MS-FAT reformated. Put the disc in, followed the intructions to enter the start menu and the operating system reinstalled. Let stand a few hours in my case 7 hours. Then configure the RAID and all was good.

• Don't restart Ready NAS Duo

  We walked into work this morning and our ready Nas Duo was not working and does not detect on RAIDar. We hit the Reset button and turned on, the blue light flashes, lights flashed on and outside and the fan makes a noise, but it doesn't do anything else. We tried unplug and wait a minute before you do it again, still nothing. It detects no more in RADARS, but it was working very well and detect radar last week. When we put our serial number in, it came with ReadyNA SRN2000 in the model, but it won't let me put that in the above model number section.

  Yes, you will need to disable the power is not blocked during the boot process.

• PXI-5412 access problem

  I have a PXI chassis which has a function (PXI-5412) generator.  The function generator exhausted at work but acts after that I reinstalled the drivers to solve a problem.  It does not appear in the category DACmx or traditional daq.  Using the name of the instrument (PXIx::yy:INSTR) will not solve the problem.  Got prompt "signals of NOR detected all the generators are used by other processes and are not available for the FGEN soft front" when I try to use the or-soft front panel for test - nothing else is running.  However, when I took the PXI-5412 out and put it in another location everything would work.  I tried to reinstalled DAQmx and niFgen several times but it does not solve anything.  Help, please.  Thank you.

  Here is some additional info:

  LabVIEW 7.0, Windows XP, niFgen 2.4.0, DAQmx 8.0.1

  SB

  Hello

  I had the problem of the road.  I took the PXI card, use pliers to pin the side wall of the connector bottom of basket and it works.  I don't know exactly what PIN because of the trouble, but there must be one (or more) pins outside the connector of the PXI-5412.  I guess that I rejected question commitment pin a little too early in the game.  Thanks for help.

  SB

• HP pavilion dv7-4165dx: spdriver_1.37.0.193 drivers not plug-and - play doesn't work

  Status of the device: this device is not present, is not working properly or is not all its drivers installed. (Code 24)

  My graphics cards: AMD M880G with ATI Mobility Radeon HD 4250

  Operating system: Windows 7 32 bit

  I haven't changed anything on the system and the drivers when the problem appeared, nor detected no sign of the performance problem, but I found this alert in device manager.

  Please advice solution. Thank you.

  Hi SoulOfWater,

  Thank you for your answer, I am sorry that did not help.

  There are recent changes to your system?

  Have you checked against viruses and malware?

  Try this step.

  Go to the command prompt run command and type

  Right click and run as administrator

  Type sfc/scannow, and then press on enter

  It will look for corrupted files and try to fix them

  Here is a link to the Drivers of HP Pavilion dv7-4165dx Entertainment Notebook PC. Please make sure you have the latest drivers.

  Try to delete the driver from Device Manager (not just uninstall)

  Restart your computer and run the HP Support Assistant to update the drivers again.

  If that did not help. You can try to install the original driver of Recovery Manager.  Using the Recovery Manager to restore the software and drivers (Windows 7)

  If you are still experiencing a problem, try a restore to before, it happened.  Using Microsoft System Restore (Windows 7)

  If it is still not resolved, I suggest that perform you a recovery to factory.  Performing a recovery of system HP (Windows 7)

  During the recovery process, you will receive an option to backup your personal files. If you have not already done one, I suggest you do one now to avoid any data loss.

  Restore files that have been supported to the top using HP Recovery Manager (Windows 7)

  Alternatively, you can contact HP support for assistance.they have the ability to access your system remotely to help locate and solve problems.

  Please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number   Technical Support site map

• Images to transfer from the pc to the storm blackBerry Smartphones

  Hello I am new to the blackberry forum.  I tried to use a search but I don't see anything that relates to my specific problem.  I'm trying to transfer pictures from my pc to my storm.  I tried to take the sd card on the phone and put in on slot sd on my pc, but my pc does not recognize nor detects the card at all.

  Can someone suggest a solution as to how can I transfer photos from my pc to my storm.

  Thank you

  Thank you Craterz, for your help, once I rebooted my pc blackberry icons 2 came. Guess I should have done that before I asked for more help.  In any case, I really appreciate your help.  This problem has been resolved.

  Thanks again

• After pressing the default from the factory to Raidar ReadyNAS Duo V2 gives the device is offline

  Yesterday, I pressed the button by default factory in Raidar. The result is today, 15 hours later, the LED and the display work correctly, but when I try to access via Raidar the message arrives: device is offline, please wait. I can stop the ReadyNAS with the button on the device but when I stand the unit with a paperclip in the reset button and the powerbutton, I can't change the menu the normal newsstand. Does anyone have an idea if it takes days to reset to factory default? The HD I use are 4 x 2 TB and 5.3.11 Firmware.

  Factory worked perfectly, after I renewed 1 HD which created a redneck during the factory default. Now everything works well again.

  Thanks for the help

• LV 2016: LabVIEW could not create the required channel file permission error endpoint; NOR-488: Error of hardware detected DMA

  I just installed the new 2016 LabVIEW with the two patches and wanted to check the new feature.

  When you create a channel writer, there was a pop up select the Channel end point, but whatever the option chosen, there is a window saying "LabVIEW could not create the required channel endpoint", error ccode: 8 file authorization error

  NOR-488: Error detected DMA hardware.

  I have error permition from file to file, file that is?

  By chance, do you have re-defined the default data directory in LabVIEW?  LabVIEW uses to host files for the warp threads, and if you moved from its default position in your profile (C:\Users\\Documents\LabVIEW data), especially if you moved it to the root of C:, it could become unalterable.  This must remain in your profile!

  Bob Schor

• My computer motherboard laptop disappeared. Connected my hard drive to another laptop but still, no data is found, nor my hard drives are detectable? Very depressing and need the data. Help, please

  My laptop broke down (motherboard, Gone) and is not repairable. The technician took my hard MovieFrame and there is a very important document that I need very badly. I bought a proper case and connected my hard drive to another laptop but unfortunately no data can be found, nor my hard drives are detectable? I am very depressed and need the data. Please helllllllllllllllllllllllllllllllllllllllllllppppppp

  Hi Adel Bushager,

  I suggest you contact the store local tech or the manufacturer of the system to help with recovery of data from the hard drive.

  Hope this information is useful.

• NOR-XNET Bus Monitor does not detect port

  Hi all

  I need somehelp. I have 2 PXI-8512 and assembla CAN1 CAN2, CAN3 and MAY 4.
  I want to control my XNET data traffic. Yes, they are available in MAX. But once I open the monitor of Bus OR-XNET, every channel I have are not detected.  Interface name box is empty, does not show anything.

  Here is a screenshot.

  

  Someone knows what's the problem?

  Thanks for help.

  Rajamodol

  Hey Rajamodol, Nicola.

  I'm sorry, but this is a limitation of the distant targets in XNET bus monitor. See the following Knowledge Base article:

  Why can I not see my NOR-XNET CAN interface on my remote target in Bus monitor? -National Instruments
  http://digital.NI.com/public.nsf/allkb/92F10284E8061FB68625793600484D79?OpenDocument

  The article also mentions an alternative, where you use an example VI for a similar feature.

  Best regards

  Christoph

• ReadyNas NV + unable to communicate via Raidar/Frontview V1

  Several weeks ago my NV + V1 began to file my network, finally disappear completely. When I reboot the device that all four LEDs are lit in green, stays in power button turned on, the lights of the port eithernet correctly, and the display shows a valid IP address. If I initiate Raidar to Frontview I get nothing. I would like to get help on how to get my return business NAS

  Thank you Jenn. I will do as you suggested and return with support staff.

  Rick

• NI DMM Soft front panel detects any nor-dmm

  Hello

  has anyone seen this failure? I have can´t open sweet face before you configure the DMM. I tried to reinstall the VISA and NOR-DMM without success.

  Thank you

  Robert

  Robert,

  What happens when you run the self-test on the PXI-4072 in your system?

  Also, if you rename the PXI-4072 another name ("4072", for example), it works?

  4072 in your system looks like it is may not be installed correctly. The icon it shows in MAX is PXI generic icon, not on the icon that should display devices OR DMM (my apologies, but I don't remember the terminology). In addition, it should show the 4072 as 3: NI PXI-4072 "PXI-4072. Your is showing that 3: 4072 "PXI-4072. See the image below for how it should look like:

  

  Please let us know if that helps.

• How can I detect the minimum and MAXIMUM values of the inputs to the NOR-Scope channels (NI-SMU-1073)?

  
  

  Hello Philippe,

  Take a look at the example below. Retrieves the Min and Max of table X and also correspondent has the value Y.

  Best regards

  Klas

• No access to readynas (104) after upgrade 6.4.1...

  Hello
  
  Since the 6.4.1 update my leftovers of readynas on the "Boot" message... »
  with the activity LED sets and the power light blinks slowly.
  A ping from the pc has a positive return, but the administration page is not
  accessible from a browser. Raidar utility doesn't detect any device.
  
  How to connect to the Nas to perform a rollback of the update?
  
  Best regards.

  Hello

  After contact with the media, the cause has been found. Too many shots that cause a disturbance during the tio 6.4.1 update. By hand cannot delete pictures it took after the SIN starts in read-only mode, back up all data and perform a factory reset in version 6.4.1. To reboot and after checking the volume of reynchronisation, the NAS is fully operational again.
  Thanks to the Netgear support for assistance.