ThinkPad E520 - camera has stopped working

Similar Questions

• Web cam has stopped working and is no longer in Device Manager

  on my inspiron 1420 dell webcam has stopped working. I have not found in the Device Manager.
  

  Also, which could be connected, when I start a box opens indicating this device A USB is not recognized - but there is no connected device.

  any help?

  
  

  
  

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Look here:

  Reload the drivers of web cam and the enforcement program web cam dell downloads for your inspiron 1420.

• BlackBerry torch Smartphone camera has stopped working

  Unit has stopped working, but the video camera works very well - had the phone for 5 weeks.

  With the BlackBerry device powered time, remove battery for a few seconds and then reinsert the battery to restart.

  Try again

• Button ThinkPad 8 Windows has stopped working

  All of a sudden the Windows button has stopped working (no haptic feedback). The Tablet works otherwise, I can always power on it by the power button / stop. Unfortunately, the button power seems to be fragile and probably collapses when it is used on a daily basis.

  Someone has an idea if possible otherwise remedy that is rented for a month in the repair? A loose connector, or something like that? I don't think that it may be a software issue.

  Thank you.

  First Windows button has stopped working, but now, after several weeks, the touchscreen so. I got replacement touch screen cable AP HM 00, 124 of the Lenovo service replacing the cable has solved.

  I guess that's a design flaw , because the cable is longer than it supposed to be (see photo) so it becomes distorted and there caused by a variable pressure on the bottom when cover stand by the fingers on the lower part of 3 mm approximately. Fixation by band does not help, because it always "bubbles" somewhere I hope that this will happen again sooner or later these other two cables (audio connector and display) is not the issue.

  

• Function of Zoom of Smartphones from blackBerry on camera has stopped working?

  Star has worked for about 10 days and then mysteriously stopped working. Someone had this problem? All patches, knowledge? Thanks for the replies!

  Thank you! This seems to have worked. Boards must be among the best sources of consumer information on the planet!

• Why my iPhone 5 c rear camera has stopped working?

  I got my iPhone 5 c last Christmas and it has been fine for the verbal time. I realized my camera back no longer works. Before everyone tells me to reset, I tried so many things, I talked to apple and all, nothing seems to work. My iPhone has got out of the shell once or two, if this is useful. And my forehead and flashlight work very well. When I turn on the camera app and switch rear camera, it goes fuzzy and hangs on the last image in the image of the front camera. Someone at - it help him? I'd like to avoid having a new device

  Sorry for the random capital letters too, he kept on the move

  It looks like a hardware problem

  Take it to an Apple store or an authorized repair center

• Re: Satellite L450D-11 X built in Web Cam has stopped working

  When I open the Toshiba Photo / Video software I just get a photo of clouds. The webcam led turns on but I have no image.
  I aircrcrack and installed the latest version of the webcam software, but have the same problem. I removed the Chicony usb camera from the Device Manager and rebooted.
  The pc has re - install the driver software, but I still have no picture.
  All of the suggestions.
  Thank you

  Hello

  Maybe you should try it;
  In Control Panel-> devices and printers, you will see the webcam listed as working device.
  We could remove the webcam and could attempt to reinstall the driver again.

  I'm not sure if it would make a difference because you have already tried to delete this device manager but it of certainly worth a try.

• laptop camera has stopped working!

  Skype was working well, but now it says that it cannot find my webcam! I don't have any other programs running. integrated sound to my laptop and I can't work, how to fix it! What should I do? im running windows xp, I think, tried to update. nothing works.

  You need first to update your installation of Windows 7 in the last Service Pack 1 (SP1) and update the drivers of the system.

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-7-Service-Pack-1

  I would also say to uninstall the ASUS Virtual Camera application.

• Bridge "get photos from camera" has stopped working and bridge no longer recognize my DNG files

  , I've got bridge set up to get the pics off mem.card whenever I have insert one in my laptop (win. 8.1). A week ago I installed PlayMemories from Sony. Without asking he hijacked the task of the bridge to get photos of my cards. What's worse, I tried to start the function "get photos from camera" manually from the deck. Bridge started working, but nothing happens. I uninstalled PlayMemories and reset the bridge, said to my laptop to run bridge as soon as I insert a card. Still nothing is happening and I still can't get the function "get photos" to run manually from the bridge. In any case, I can still rund the DNG Converter to get my photos, but today Bridge does not recognize my files DNG - a well brought yesterday. CS6 downloaded from this link https://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html and tried to run the Setup program, but it doesn't seem to do anything. Maybe I should do a full uninstall off CS6 for her to do something... ?  Anyway, if any of you guys could help me with my problems of bridge/CS6, I would be grateful.  I have 3 sets of photos together and a shoot of comp. of snowboarding I have to finish this week

  CS6 running windows 8.1

  Good point.

  Bridge was not integrated with CS6 to CC? I have a following if, uninstall/reinstall only for laughs.

• I have adobe CS3 installed on macbook pro, but he said that the license has stopped working... I then went to your website and he advised me to download the license recovery application, which I did, but then when I tried to run this app, it then came wi

  I have adobe CS3 installed on macbook pro, but he said that the license has stopped working... I then went to your website and he advised me to download the recovery of license application, I did, but then when I tried to run this app, it then came with the recovery of the license was not based... How can I get my CS3 works again?  Thank you, Glenn

  Hello

  Please check the help below documents depending on your operating system:

  Error: "License has stopped working". Windows

  Error "Licensing has stopped working". Mac OS

  Hope that helps!

  Kind regards

  Sheena

• import of vio - pov cam divx files hangs: "COM surrogate has stopped working".

  Windows vista 64 4 GB of ram, 2.1 mhz

  First elements 9

  Import divx .avi VIO pov camera file blocks adobe PE9 with message: COM surrogate has stopped working.

  If I uninstall divx then PE9 won't crash, but only audio is present.  VIO said correct codec must be obtained from Adobe.  Is there a fix for this so that my $100 is not lost?

  Unfortunately, DivX and Xvid are not well taken in charge, or not at all. Some have had better luck with pre 9.0.1, but they are few.

  In order to ensure that things are as good as they get, I follow the steps described in this ARTICLE and also make sure you have the latest version of the DivX CODEC installed.

  Of CyberLink PowerDirector seems better to work with images of DivX, than does any program Adobe NLE.

  Good luck

  Hunt

• Import media has stopped working

  All of a sudden my import media has stopped working.  I get the fine window, I select the video I want to import, the window closes, but the video does not matter.  Just before this happened he began to import some videos that I didn't, so I stopped the import process, transcode quit, etc..  So when I started to import the videos I want it only imported and copied one of the 5 but don't copy others 5 in FCP, just left them bound to the camera.  It's never happened before.  I have version 10.2.3

  Close the FCP X.

  Hold down the Option key as you restart FCP X.

  Create a NEW library.

  Try with your wanted clips import.

  Al

• iTunes has stopped working / Win10 64

  Hello

  I have a problem running iTunes on 64-bit Windows 10. (Lenovo Thinkpad Yoga 12)

  As soon as I click on the iTunes Store tab, the program crashes and I get the message "iTunes has stopped working, Windows is checking for a solution to the problem..." and after a few seconds he said "a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. »

  I have already tried:

  Complete uninstallation of all programs Apple, including the deletion of all files, and then reinstall it.

  If I do this, the installation fails. He tells me that the bonjour service cannot be started.

  That's why I opened archive installation with 7-zip and has just installed iTunes and support the application. That worked well, but I still get crashes.

  I don't know what else I could try and you'd be grateful for any help!

  Thank you and best what is the Switzerland

  Jonas

  The 12.3.3.17 version seems to cause problems for some people. It may be best to roll back to the last version of iTunes that has worked for you. then wait for the following. See the programs installation of iTunes to download links. If you're back from 12.3.3.17 to 12.3.2.35, then you must also restore the database of the library in the manner described in the empty/corrupted after upgrade/crash iTunes library.

  TT2

• Satellite T130: integrated webcam has stopped working

  Hi, I have the same problem of the bellows of the question, as I looked around and I was not able to find the answer I need.
  I have a Satellite T130 and, suddenly, the integrated webcam has stopped working properly. A blue light is on, but there is no picture. What can I do?
  Thank you

  Hi mate

  I have the same problem, sometimes using my U400.
  This happens if the room is dark for the camera.
  If something like this happens to you that I recommend that you keep your finger in front of the webcam for a short period.
  After that, the image of the webcam should come back again in my case it worked.

• Satellite Pro A300 - 2C5 has stopped working

  Hello

  I have a problem with my Toshiba Pro A300 - 2C5.
  It stopped working today.

  I have paid a top tea but removed is as fast as possible but a little water got inside my laptop.
  He worked for a while, I turned off and it works again an hour later, but unfortunately it has stopped working.

  When I try to turn it on, the syptoms are as follows:
  -the only light that shines is a power indicator light
  -l' screen does not work at all (it stays black and went offshore)
  -fan works
  -It seems hard disk does not work if Windows does not start
  -the keyboard does not work, when I hit tke keys nothing happenes, I tested the Caps Lock key, but not flashing
  -computer does not read my camera memory card

  What shoul I do to get it working again? :(
  Any help appreciated.

  K.

  Hello

  The anomaly can be related to different laptop parts in the worst case the liquid spill damage the motherboard and you will need to replace the part.
  In the best cases, it could be a RAM error as it happens to one of my friends.
  He spilled coke on the keyboard and after awhile the laptop could not turn on.
  We checked memory sharp and replaced both modules with new RAM modules and this fixed the problem

  You can try this also maybe it helps if all other parts should be checked by a technician of the ASP.