Receive messages sent no message when the e-mail message is sent

Similar Questions

• Windows 7 ultimate has received 29 updates today, now when the user icon, click on do not see the field of password for sign on

  Windows 7 ultimate has received 29 updates today, now when the user icon, click on do not see the field of password for sign on

  Hi Richard,

  Thanks for posting your query on the Microsoft Community.

  Thank you for details on the issue and we are happy to help you.

  I suggest to refer to the following article from Microsoft regarding Solutions to problems with the Windows logon and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-problems-with-logging-on-to-Windows

  Please let us know if you need help with Windows. We are happy to help you.

  Thank you.

• There was formerly a progress bar for when the e-mails were being downloaded. It has now disappeared. What happened to him?

  My e-mail provider does not always play nice. There has always been a progress bar in the status bar to indicate that the emails were download correctly. If I don't see the progress bar, I knew to check with the provider. Recently, the progress bar went, and I have no way of knowing whether or not the emails are downloading. They appear any kind of surprise. In addition, I used to send a message that there is no new messages availalble to download (if there is no message to download) on the status bar even. He went as well. I have so no way of knowing if I get no messages because there is no, or if I don't receive messages because the provider did something. So my question is: is this an error with Thunderbird or was there an update which resulted in a loss of function that I relied on? If it's an error, what should I do about it?

  Good to know. It has been long since this problem was asked about. I thought Ad Blocker had fixed their add on.

  You mark this as resolved if it is satisfied? Thanks for the update of the question in order to help the next user of Thunderbird.

• How can I cancel my Windows Live ID account when the e-mail account used to open it is closed?

  When I closed my account "comcast.net", I didn't know Windows Live ID he always used as my username. I tried to cancel, but insturctions are sent to the e-mail address that was cancelled and there is no way to change my email address. Windows Live ID Solutions does not provide a way to contact someone directly, at least as far as I could see. At anyone who will meet thiis situation?

  How does this relate to the features of Windows Update?

  See...

  HOW to close a Hotmail account
  http://liveunplugged.WordPress.com/2011/05/23/Windows-Live-Hotmail-how-to-close-a-Hotmail-account/

  And maybe http://windowslivehelp.com/solution.aspx?solutionid=d18cf147-9867-49de-a60c-aae81982a54e

  Post questions in this forum-online http://windowslivehelp.com/forums.aspx?forumid=d3fda415-1e53-4007-8e0c-2a77180ffb1d

• How can I change that contact appears when the e-mail?

  I have more than my wife's iPhone Contacts listed under his name and surname.  I also did a called ICE (emergency contact) so numbered. Whenever I want to send him a message and begin to enter the name or number, ice shows up instead of its name. Is it possible to change things so that his name appears instead of ice? (If it's important, his name starts with Y and his last name begins with H)

  May I suggest another approach?

  Like you, I wanted to make available ICE contact in case it is needed.  For years, I had an iPhone app specifically for this purpose.  However, since iOS 9, there is a new effective way to do it.  If adapt you this method, you will be able to provide much information on the ice if you want (things such as the number of telephone of the doctor, medications, allergies, etc.) and you won't have an ice entry in your contacts list.

  Please consider this option.

  Set up your medical ID in the application of the health on your iPhone - Apple Support

• Trigger an email notice when the workflow mailer service is down

  Dear all,
  
  We can trigger an email automatically from the operating system, if the Workflow services mailer goes down?
  
  or which is the best method to notify when services are down. Please update...
  
  Thanks in advance...
  
  Kind regards

  We can trigger an email automatically from the operating system, if the Workflow services mailer goes down?

  Yes, by checking the OS workflow services - see (Note: 1054215.1 - how to check if the sender of Workflow runs) for more details.

  or which is the best method to notify when services are down. Please update...

  You can also use Oracle alert (use of the query in the same doc) - you can find the manual Oracle alert at http://www.oracle.com/technetwork/documentation/applications-167706.html

  Thank you
  Hussein

• talk to the sender when the e-mail is available in

  I love Eudora because my computer speaks of the sender and the subject. Thunderbird can this do?

  Thanks for any help!

  Thunderbird does not have recognition of text to speech.

• Smartphones blackBerry torch freezes when the e-mail account configuration icon engaged

  I'm under bundle 2647 - platform version 6.0 6.6.0.223

  While in the editing and try to open "email accounts" unit freezes or does not allow me to open the program

  Yes, I did. I called my service provider and they have crossed a new configuration

• 68th character of the subject always a whitespace character when the e-mail through Pre

  No matter who has noticed the 68th character is ALWAYS a space? It seemlingly inserts a space as the 68th character, even if it must be a non-whitespace character.

  This issue was addressed with webOS 1.4. Please advise after you download the update, if the issue is still ongoing.

• The E-mail Message body dynamics PowerShell/PowerCLI

  Hello, do not know if I am in the right place to post my question on PowerShell/PowerCLI

  I have a powershell script that will send an e-mail message to an outlook client.

  The body of the msg will have two things-related values: Snapshots Active in the virtual environment and CD-ROM attached to virtual machines.

  Let's talk when the e-mail reports more than a CDROM attached, how to increase or decrease the msg body according to results from the virtual environment?

  So far, I have this code:

  if (($Snapshots -eq "yes")  -or ($cdroms -eq "yes")) { 

  $array0 = @() 

  $array1 = @() 

  $array2 = @() 

  $array3 = @() 

  start-sleep 1 connect-VIServer $vcserver 

  $array0 += Get-VM | get-snapshot | %{$_.VM.Name} $array1 += Get-VM | get-snapshot | select-object -expandproperty Name 

  $array2 += Get-VM | get-snapshot | select-object -expandproperty Created 

  $array3 =@(Get-VM | where { $_ | Get-CDdrive | where { $_.ConnectionState.Connected -eq "true" } } | Select-object -ExpandProperty Name) 

  $i = 0 

  $j = 0 

  Do { 

  $msg.Body += "<FONT COLOR=black>VMware HealthCheck vCenter2</FONT><BR><BR>"  + ` 

  "<B><FONT COLOR=black>Snapshots Active</FONT></B><BR>" + ` 

  "<B><FONT COLOR=black>VM Name</FONT></B>"+` 

  "<B><FONT COLOR=black>                                      ` Name</FONT></B>"+` "<B><FONT COLOR=black>                                      ` Created</FONT></B><BR>"+` "<FONT COLOR=Red>"+$array0+"</FONT>"+` "<FONT COLOR=Red>                                    "+$array1+"</FONT>"+` "<FONT COLOR=Red>                                    "+$array2+"</FONT><BR><BR>"+` "<B><FONT COLOR=black>CDROMS Connected (Bad Habit)</FONT></B><BR>"+"<B><FONT COLOR=black>VM Name</FONT></B><BR>"+"<FONT COLOR=Red>"+$array3+"</FONT>" 

  $i++ 

  $j++

  } Until (($array0[$i] -eq $null ) -or ($array3[$j] -eq $null))

  The result I get is:

  From: VMware Healtcheck

  Sent: Thursday, June 20, 2013 13:26

  From: me

  Re: VMware health UPIvCenter2

  VCenter2 VMware HealthCheck

  Active snapshots

  Name of the created virtual machine

  VEEAM1 VEEAM1 Test1 Test2 20/06/2013 09:06:09 06/20/2013 09:31:15

  Connected CDROMS (bad habit)

  Name of the virtual machine

  MAILGATE

  And I would like is:

  From: VMware Healtcheck

  Sent: Thursday, June 20, 2013 13:26

  From: me

  Re: VMware health UPIvCenter2

  VCenter2 VMware HealthCheck

  Active snapshots

  Name of the created virtual machine

  VEEAM1 Test1 20/06/2013 09:06:09

  VEEAM1 Test2 20/06/2013 09:31:15

  Connected CDROMS (bad habit)

  Name of the virtual machine

  MAILGATE

  NOTE: I have multiple snapshots or multiple virtual machines with CD-ROM connected. Thanks for your help.

  You see not all snapshots is because the loop stops when the snapshots or the cdroms are done.

  Assume that you have 3 entries for snapshots and 2 for the cdroms, you will get only 2 lines each.

  I would do something like that

  if (($Snapshots -eq "yes") -or ($cdroms -eq "yes")) {   $array0 = @()   $array1 = @()   $array2 = @()   $array3 = @()   start-sleep 1   connect-VIServer $vcserver  $vms = Get-VM  $snaps = $vms | Get-Snapshot  $array0 = $snaps | %{$_.VM.Name}  $array1 = $snaps| select-object -expandproperty Name   $array2 = $snaps | select-object -expandproperty Created   $array3 =@($vms | where { $_ | Get-CDdrive | where { $_.ConnectionState.Connected -eq "true" } } | Select-object -ExpandProperty Name) 
  
  # Header  $msg.Body += "VMware HealthCheck vCenter2
  
  "# Snapshot header  $msg.Body += "Snapshots Active
  "  $msg.Body += "VM NameNameCreated"# Snapshots  0..($array0.Count-1) | %{    $msg.Body += "
  " + $array0[$_]    $msg.Body += "" + $array1[$_]    $msg.Body += "" + $array2[$_] + "
  
  "  }# CDRom header  msg.Body += "CDROMS Connected (Bad Habit)
  "# CDRoms  $array3 | %{    $msg.Body += "VM Name
  "+"" + $_ + ""  }}
  

  Note that I don't check if spacing HTML and page layout is as you wanted. You may need to add some spacing.

• My out going to send show a slow time - when the I send email it displays the correct time

  Hello

  I have a vista home Prieum system... .the problem is that email when time which is recorded on the email before it is sent a slow time... shows when the e-mail is received, it displays the correct time... How can I recrify it, you can

  Jeff Matthews

  Hi Jeff Matthews.

  Thanks for posting in the Microsoft Community.

  I understand that outgoing emails are incorrect time, he would be grateful if you could answer this question more answering the question.

  1. this happens with a specific e-mail program?

  2. are you faced with the question of the webmail like Hotmail or Yahoo, or with any client e-mail like Outlook?

  3. have you made a recent software or hardware changes to the system?

  It seems that you have to change some settings in the email program itself to change the time.

  You must get in touch with the email service provider for assistance.

  If you use Hotmail or Outlook, you can post your query in Windows Live or Office Outlook Forum to get help.

  If please reply and let us know if you need help to solve the problem and we will be happy to help you.

• Is there a signal when the user clicks the overflow (3 points icon) on the actionbar button?

  Hello world

  Is there a signal when the user clicks the overflow (3 points icon) on the actionbar button? I would like to receive this signal (and signal when the overflow menu is closed) in order to modify the list of action items.

  Thank you very much

  -tom

  actionMenuVisualStateChanged is what you are looking for

• How can I get help outlook express? When I send a mail, I get an error message indicating the e-mail was sent not.

  Had problems with Outlook Express.  When I send a mail, I get an error message indicating the e-mail was sent not.  The e-mail has been sent, but it never leaves the output area.  I have to go and delete the e-mail.  Then I don't have a folder of e-mails, except in my deleted file.
  Any help would be appreciated.

  You have apparent dbx file corruption.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• When answer us e-mail, punctuation change another channel of the alphabet, when the other person receives the message.

  When answer us e-mail, punctuation change another channel of the alphabet, when the other person receives the message.

  When they reply to the message, foreign brands are repeated to us. I find no access in the program to fix this problem.

  original title: problem with punctuation

  Guessing that you use Windows Live Mail 2011, take a look at this page: Why do I see strange characters in messages? It can explain your situation and offer solutions.

  Noel

• Windows Mail I have 83 message unread, but when I press on send and receive blocks of system after / during the 20 message, no clue how to move...

  Windows Vista, windows mail system, the operating system is internet Bt, their Guys tell me that there must be an email with lots of pictures including the too large to download but they can't tell me how to remove to allow all messages arrive - my ipad seeps all the but the hardtop does not...

  Hello

  1. You did it all changes before this issue started?
  2. Do you receive an error message/code?

  In order to offer appropriate workaround solutions, let me know if you

  always send home (and if so, which is the home ISP), or if

  you use a laptop to a fixed location (i.e. your desktop) or more

  different places.

  Method 1: Disable Antivirus program to check if its competitor

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: To check it y it conflicting programs, try mode safe mode with network and clean boot:

  Step 1: Start your computer in safe mode with networking

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Note: Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed

  If the problem does not occur in Mode safe mode with networking, we can use the approach 50 / 50 to narrow down the root cause of the problem.

  Step 2: Refer to the section below for instructions on how to start your computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Method 3: Follow the steps described in the article below:

  Solve problems with Windows Mail

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  It will be useful.