Reflecting display Quosmio G10-124?
I made very good experiences with all portable Toshiba before and I think the new book of Quosmio might be one good idea for another.
But in some German testreports could be criticized, Quosmio G10-124 have a reflective display (Stiftung Warentest 5/2005). Is this true? Have all laptop Quosmio those reflective screens? Or y at - it an improvement? Thank you!
Hello
Since last week, I got a new Qosmio F20. In my view, the screen is brilliant. Screen is bright, clear and graphic illustration is very well defined. Little time: the display is perfect.
Good bye
Tags: Toshiba
Similar Questions
-
I need an extra Baterry my g10-124. Oheard there's an akkupack where I can just take my dvd player and just put in some kind of battery that expands battery working time!
(1) anyone know something?
(2) what type of second battery buy for my g10-124? I know it's the Li - ion battery but what type?Hello
Sorry, but know there is no extra battery for this camera. Some units have an extra-large battery or select Bay components but not Qosmio. DVD player is fixed mounted and there is no way to put a battery inside.
-
Qosmio G10 124: GPU overheating if disabled tuner
My G10-124 with: replacement card with nvidia go6600 and 915 PM Chipset works well.
But if I disable Tuner, to get more autonomy the fan doesn't work properly and the GPU gets over-heated (> 100 degrees).
Does anyone know about this problem and a way to get the Fans work properly?
What is the Tunerdeactivation effect? I can't understand.
I found your other thread:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=50736Seems that you have updated the DMI himself. This could affect the BIOS information and info table cooling in the BIOS.
This can affect the performance of the cooling modules and can lead to the highest temperatureSecond reason could be the use of non-Toshiba graphics cards drivers
3rd party drivers graphics don t support protection against overheating and this leads to better GPU performance and at a higher temperatureWhat I recommend to check the unit by an ASP. Guys should take a peek at the DMI information.
-
Qosmio G20 screen is comatible with display Qosmio G10?
Hello
Dose anyone know if the screen Toshiba Qosmio G10 is compatible with the Toshiba Qosmio G20?
Thank you guys
Of
SweetHello
I think display of the G20 should be compatible with the Qosmio G10 display.
I searched a bit and found that the Qosmio G10-100 PQG10E was fitted with the 17 "WIDE XGA LCD.
The Qosmio G20-101 PQG20E supports the same 17 "WIDE XGA display.Therefore, it seems that both units use the same screen.
-
Quosmio G10 stopped recognizing that Memory sticks
My G10 Quosmio ceased to recognize them as cards Memory sticks. I can't find a driver or a solution.
When I insert the memory stick it offers you to format reports more often or that there is no disc in the drive
Is there a driver who disappeared?
SteveHello
System Restore tool is a good toy for the restoration of the BONE to this early time.
But you can also try to remove the USB ports on the Device Manager.
Then after restarting again the operating system should recognize the USB ports again.
Then you can try to plug in the USB key and check if it works. -
Blank CD is not recognized in a Qosmio G10 124
Hello, my g-10-124 plays CDs and DVDs but not to burn or recognize empty CD.
Answer check activate/properties of the database does not work like Windows XP MCE German does not have this tab.
Any ideas for Novice?Thanks in advance.
Hey Buddy,
When did the error first appeared? Installed software at the moment? Perhaps burn some new software or something else?
Sometimes, a recently installed program may be the reason for these failures with ardour. Another suggestion is to update the firmware of the CD/DVD driver if possible, then check if the same problem persists.
So, if this is not enough, you can try to reinstall your system and then then just by installing a burning program to see if you have the same error.
Alternatively, you can try to burn a CD using "UBCD4WIN" (http://www.ubcd4win.com/).
It s a windows live cd which give´s you the opportunity to test your system without modifying your system. With this tool you can know if it is all relative, or rather a hardware problem.
Just burn it to a cd, run it and then try to burn a cd with the system which is then loaded into RAM.Good luck
Welcome them
-
Computer freezes (no blue screen), but on reboot displays error code 124.
More than 3 months my computer froze at random on 5 occasions, sometimes all this idle and sometimes browsing the internet.
After reboot, windows tells me that he has recovered from an unexpected error.
It's information:BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8007CD88F8
BCP3: 0000000000000000
BCP4: 0000000000000000
OS version: 6_1_7601
Service Pack: 1_0
Product: 768_1I also downloaded the minidump file on my skydrive:
https://SkyDrive.live.com/#CID=F3389EB25ED220A7
No information about the cause of the problem would be highly appreciated.
Thanks in advance,
Elliot.
Original title: Windows 7 freezes and the error code is: BCCode: 124
There are two main problems. I am not sure of the third.
Log name: System
Source: Application Popup
Date: 23/09/12 19:23:08
Event ID: 1060
Level: error
Description:
\SystemRoot\SysWow64\drivers\tandpl.sys has been blocked by a loading due to incompatibility with this system. Please contact your software vendor for a compatible version of the driver.It could be malicious.
I recommend that you run Disk Cleanup or cCleaner to remove temporary files as this will reduce the time to scan security software.
Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
http://www.computerhope.com/issues/chsafe.htm
http://www.Malwarebytes.org/products/malwarebytes_free
Download and run SuperAntiSpyware (Free Edition)
http://www.SUPERAntiSpyware.com/download.htmlI suggest that we check if the two errors are still happening after that we dealt with the foregoing
Log name: System
Source: Service Control Manager
Date: 23/09/12 19:23:15
Event ID: 7000
Level: error
Description:
The AODDriver4.1 service failed to start due to the following error:
The system cannot find the specified file.Log name: System
Source: bowser
Date: 23/09/12 19:24:13
Event ID: 8003
Level: error
Description:
The master browser has received a server announcement from VICTORIA-PC computer that believes it is the master browser for the domain of transport NetBT_Tcpip_ {CB46FB47-59D5-4BC9-A10A-C4E6EC721082}. The master browser stops or an election is forced.
\Device\LanmanDatagramReceiver
VICTORIA-PC
NetBT_Tcpip_ {CB46FB47-59D5-4BC9-A10A-C4E6EC721082} -
Hello
I have a 2.5 years quosmio G10.
It won't start more (black screen, no more sound at startup...)
I have seen a lot of post on the web, it seems that my motherboard is dead!...
The cost to fix ix unaffortable (above the price of laptop!...)
Do you have any information on that?
I can't believe, this laptop is a laptop upscale, it cost me about 3000 euros. For only 2.5 years of use moderate!Hello
I think that is not just to sell a supposed "quality and solid" product, if it is still supposed to last more than three years.
A friend of mine a year ago, Mercedes ML, and in one year he was already three times in service due to various malfunctions. Now I ask you: do you really new ML is assumed product robust and quality? So much about the quality of the product.
For expensive products, it is always recommended to buy an extended warranty. On the duration of life, we can discuss but I think sometimes we just have a chance with the things we buy.
-
Scratches on the Macbook pro retina screen.
Hello
I bought a Macbook pro 13 "in may 2015 Retina. In the last six months, I've noticed there are scratches that are developed not the screen. I do not use a cleaning on the screen lotion and dust with the brush dusting given to me by the retailer. He started with the corner of screens and finally spread on the screen.
As such, there is no difference in the resolution of the screen, but I was wondering if the surface of the screen will crumble over time. Please let me know the solution for the same thing.
Put the guard of screen help?
There's this problem:
http://www.MacRumors.com/2015/10/17/Apple-MBP-ar-coating-quality-program-stainga you.
retina of anti-reflective display on the glass screen problem
This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.
-
Question about viewing on Tecra W50-A-104
HI, I red a good review on the Tecra W50-A-104 on notebookcheck and they say it rises from this Panel and it is a very good display:
* 15.6 grips 16:9, 1920 x 1080 pixels, TOS508F, IPS LED, 92% sRGB, brilliant: No. *.
But if I go to the Toshiba.de I see that specifications are:
* type: anti-reflective display eDP Toshiba Full HD TFT high brightness with backlight LED, 16: 9 aspect ratio *.
A TFT instead of IPS
They are the same characteristics as the W50-A-116, which is available in my country, the Italy. I am interested in the W50-A-116 of course and I want to know if the 116 and 104 times the same mount slab IPS as says the review.
Thank you
Haitham JaberBoth Tecra models have the same part number - PT640E then I'm 100% sure that both models have the same display. It is 15.6 FHD 300 SFCL LD-DISH EDP (TFT Color LCD IPS) Full HD.
I can imagine that the description on the Toshiba and some independent Web page is not the same.Tecra W50-A-116 with PT640E-06603KIT part number is available in Italy.
-
Change screen on HP dv6 four edition 6153cl
Hi guys,.
I have a quad edition 6153 cl Dv6 and I start to notice a few very white dots (3 or 4) on my screen. I can only see them when I open a page that has "white". Does this mean I have to replace the screen very soon?
Also if I need to replace the screen it'll work if I replace it with a 1080 p resolution screen? (720 p now there).
Thank you
Hello
The screen cannot die, but if you want, here's a list of screens supported. You may need to buy more pieces, not just the screen:
Display Kit hinge (including the media and the hinges of the screen left and right) 665313-001
(4) ' ' ' ' Billboard ' ':
15.6-inch, FHD, LED, anti-reflective display panel 665335-001
15.6-inch, HD, LED, display panel BrightView 665334-001
(5) kit cable view (including the display panel cable and cable webcam/microphone module)
For use only with models of computer with a FHD display Assembly 665305-001
For use only with models of computer in the shadow dark and grey steel finish 665304-001The next book will help you if you do it by yourself:
h10032.www1.HP.com/CTG/manual/c03015537.PDF
Kind regards.
-
Pavilion dv6 6153 cl: refresh your screen 1366 x 768 to 1920 x 1080
I looked into getting a laptop with a 1080 p screen when using ArchiCAD, but before tightening of my 4 years old HP, I thought I'd give the upgrade of the screen one go.
I did some research and found HP Pavilion dv6 Notebook PC Maintenance and Service of Guide for my model, where I found a few spares FHD numbers that are easy to buy from HP on Amazon.
Namely:
15.6-inch, FHD, LED, anti-reflective display panel 665335-001
Display cables 665305-001
However, I know that the Pavilion dv6 6153 cl has never been offered in FHD. Parts are really it interchangeable?
An upgrade of the screen is possible? I've seen a lot of questions like mine asked but no confirmation it is possible. Do I need anything else (such as a new bezel) other than the cable kit and display panel?
Thank you.
Hi there @itamspada
Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.
In response to your question, yes it seems to me that you won't need these parts, and yes the parties within the series are mostly interchangeable.
Assuming that there is no damage to the connector for the Billboard, the parties should work.
-
Interface great Illustrator 18.0 CC 2014
Interface of illustrator of size is too large.
The interface seems optimized for touchscreens (my screen is touch), but I want it to look like Photoshop (in the attached picture, they are both and their differences of Interface).
Any suggestions?
Hi LeonardoGuzman,
Solutions of two to this.
1. set your BONES less than 125% scale display, for example, 124% or
2. define a UI_SCALE_FACTOR = 1 environment variable
Sanjay.
-
Failure to display on Qosmio G10
Hello
I use a Qosmio G10 for 4 years now. I just got a new motherboard installed 2 months. This morning the display begins to act weird.
When starting the laptop, windows, start symbol appears almost normal colors, but when the windows desktop is running for 2-3 seconds, the picture becomes bright. The text of the desktop icons is not sharp, and half lower of the screen there is a fine glitter mesh. Although the colors are abnormal on the entire screen: (to be determined with paint)
-Black is black and white is always white
-light gray (hue 120, saturation 0, RGB brightness each 192 181) seems normal but dark gray (hue 120, saturation 0, 120, RGB brightness every 128) is represented white.
-brown (0, 240, 60 128 red brightness saturation hue) and the red light (0, 240, 120 red 255 brightness saturation hue) are represented as the same light red.
-too dark and clear (yellow, green, turquoise, blue and magenta) are represented as the same color on the screen.
I look at the picture you see immediately that the colors are not properly represented.
When the screen is off, and then it shows colors initially normal, but then (after 2-3 seconds) everything becomes brighter and the colors become indistinguishable as described.If a 2nd screen is used each colors appear normal.
I tried the new display driver: no improvement.Please give me a diagnosis which component is defect. Do I need a new display or is the new mainbord fault (guarantee).
> If a 2nd screen is used each colors appear normal.
According to your description it takes the laptop display problem.
On the internet you can find many free tools for the control of the display. Try to test with these tools. -
Satellite C660D-124 cannot display Web pages, but connected to the internet
Hi all
This is my first post and I hope someone can advise me.
I have a Satellite C660D-124. running win 7.I have a netgear router on my pc and the laptop is connected to my home network.
I'm hosting wifi using the mac address of the laptop to access control on the router.
I turned it on and off the power, but nothing helped.When I click on the wifi down icon to the right it says that I'm connected to the network.
When I select the network connection, it says excellent signal.When I open google I get a white screen saying loading tool bar, but it never loads.
If I plug in an Ethernet cable, nothing happens.
I run AVG Security, I tried to disable the firewall and nothing happened.So basicially my laptop says I'm connected but... I am not connected. !!
all responses appreciated
Donal
Donal salvation
If I understand you right you have the same problem using a LAN and WLAN connectivity. Is this good?
If so, I think that there is a problem with your router. Reboot the router and check all the settings there.
In the worst cases it set to the factory settings and basic stuff just for the Internet without playing with other settings there.
Did you maybe test it connect your laptop to another router?
Maybe you are looking for
-
Re: Touchpad gets blue color and everything works on Satellite
HelloI would like to ask you something very annoying. It happens several times while I use this mousepad on laptop - all of a sudden it is blue in color and everything stops working. Is there something I can do to remedy this?
-
Added value package new updated day on Tecra A8 - PTA83E
Hello I searched the site of updated drivers from Toshiba here and I found the update of the package of value added on Tecra A8 PTA83E on Windows Vista Business 32 bit and the name of the files that I downloaded from this site for this added value Pa
-
Permutation of Interfaces of child object in a sous-schema control
Greetings! I'm working on a project where I am trying to use a LVOOP magic. My code is still a mess and accountable, so I'll try and keep this post direct and precise. My class tree is farily simple. A parent class holds all the screws needed to re
-
Windows 7 64-bit to 32 bit__.
I saw several computers that ship with win 7 64, I see that win 7 is installed with 32 or 64? It is easy to switch to 32?
-
Hi, someone who can help me with the following BSOD: I've unlocked just my PC with the password field, and after 3-4 then got the BSOD. I use the docking station. My pc is DELL Latitude D630. Mini051311 - 01.dmp 13/05/2011 11:12 KERNEL_MODE_EXCEPTION