Reinstall the scanner

Similar Questions

• ENVY 4500: Lack of scanning for HP ENVY 4500 software after reinstalling the laptop

  Dear support,

  I got a HP ENVY 4500, installed on a laptop with Windows 8.1 and the HP Software scanner worked fine.

  I have recently reinstalled the same laptop but with Windows 10 Pro: the printer works fine but the scanner software HP is not available! I can't use all the features of the printer this way...

  My question is: why the HP scanning software is not available for Windows 10 Pro? I used the original CD.

  Where can I download the (new) 10 Pro software for Windows?

  Please help me solve this problem.

  Kind regards

  Carmine

  Hi all

  now, I have solved my problem: I install the Windows 10 soft "HP Scan and capture" from the Microsoft Store and it works very well with HP ENVY 4500 printer / scanner!

  Concerning

  Carmine

• HP officejet Pro 8600 cannot connect to the scanner

  HP Office jetPro 8600 NG11a, Windows 7 OS, connected to the network via an ethernet connection

  I've only had the printer for a few months. Initially, had problems with the network connection that has been resolved by manually inserting the IP address outside the DHCP range.

  I now keep getting a scanner mesagesaying is not available. I try and turn it back on, but it does not work

  I have run the analysis doctor and followed the instructions but it is unable to solve the problem.

  I uninstalled and reinstalled drivers and who does not.

  Here is mention of the IP address, but as I had all the problems before I am reluctant to interfere with the IP that the printer itself is OK.

  Nothing has been changed on my system, I have not actually used the scanner to date but notice all of a sudden the error message on my toolbar and then found that the scanner will not work.

  I would be grateful for any help.

  Much thanks 2DX

  2DX

  Thanks for responding.

  I worked my way through all the suggestions and nothing worked.

  For the moment everything is OK, I've installed a new driver of network and turn on the printer before starting the computer well.

  I cross my fingers, but it is very worrying that I had all these problems of network with a new printer.

  Cordially 2DX

• OfficeJet 6600. Works as a printer, but not able to start the scanner.

  OfficeJet 6600. Works as a printer, but not able to start the scanner.

  I am facing a strange behaviour of my camera. I tried to find similar problems on the forum, but did not succeed.

  I started it 2 days (near my 5610 old which seems to have problems of aging). I use a Sony VAIO PC, OS Win7-Pro, updated.

  Running the appliance following the instructions of the poster. Presents the installation CD. Wireless net was successful and the screen of the device is to give the corresponding IP address.

  But this IP has realized the configuration SW is not recognized. I tried thousands of times, switching and on different devices (router, printer and pc) in the order required, uninstall and reinstall the device.

  However, despite the property intellectual not recognized the device functioning as a "printer".

  But I need to use it as a scanner.

  Procedure by selecting the "scan to PC" screen of the device (only available as an option) I get the message "to ensure that the feature is turned on" and I am prompted to 'open the printer HP SW,... '. ».

  Go to Windows and by clicking on "HP SCAN" in the HP/HP Officejet 6600 directory I get the a warning window stating "HP Officejet unidentified 6600.

  Can someone, please?

  Thank you in advance.

  Hey,.

  Try this document! A "no computer has detected" or "Connection error" message when scanning for HP Officejet 6600 e-all-in-one and 6700 Premium e-All-in-One Printer Series (H711)

  Have a great day!

• Unable to launch programs error: could not open rtl120.bpl file is not found, try to reinstall the program

  Original title: difficulties to open programs

  I keep trying to open different programs but get a message that says "could not open rtl120.bpl file is not found, try reinstalling the program.»  My problem is that some of these programs came with my package on the computer and if I uninstall it then I have to pay to re install a new program.  How can I solve this problem?

  Hi JenniferAS,

  1. is the issue limited with a particular program?

  2. what operating system is installed on the computer?

  3 did you changes to the computer before the show?

  It is a file associated with a program called Tune Up Utilities 2010.

  Tune up Utilities is a suite of utility software for Microsoft Windows designed to help manage, maintain, optimize, configure and troubleshoot a computer system.

  Method 1: Uninstall and reinstall Tune - Up Utilities 2010 and see if that helps.

  Step 1: Uninstall tune-up Utilities 2010.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

   

  Step 2: Re-install tune-up Utilities 2010.

  Download tune-up from here:

  http://download.tune-up.com/TUU2010/TU2010TrialEN-GB.exe

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Let us know if that helps.

• ArcSoft media crashed when attached to the scanner

  When using media and try to acquire the program film scanner crashes when the scanner is connected or not.  Scan has been checked by the manufacturer and passed as ok.  Thishappenned during the scanning of negatives and initially worked but then crashed and now leads the fact

  Hello

  ·        You did changes to the computer before the show?

  ·        What operating system is installed on your computer?

  Method 1: Put the computer in a clean boot, and then check if the problem occurs:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. Click Start and then click Run.

  b. type msconfigand click OK.

  c. the system dialog Configuration utility appears.

  d. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.

  e. When prompted, click on restart to restart the computer

  Method 2: You can also try uninstalling and reinstalling the software and check if this may help:

  Reference: Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  You can also post your query on ArcSoft forum to get help:

  http://www.arcsoft.com/forum/default.asp

• DeskJet F380 diagnosis reports that I have to reinstall the software, but I already did twice.

  DeskJet F380 / Windows XP / previews of Scanner, but when I accept the preview, it does not complete the scan. I have reinstalled the legacy, installed all updates, but the diagnostic report indicates that I have to reinstall.

  Hello _Lois_

  Try the following procedure and let me know if something changes or if you encounter any problems. It will help to uninstall all printer software and should allow a clean install. This can solve the problem.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.bat6. Once the uninstall is complete, reboot the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  DeskJet F380 Software

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.bat

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  DeskJet F380 Software

  10. run the download to reinstall the printer

• HP ENVY 7640: Connection to the Scanner error

  I recently installed a new WANT to a new Mac printer/scanner. The print/scan function worked correctly during installation. After the upgrade to Yosemite, however, whenever I try to open the scanner, I get the following message: 'pending to scan' > ' year error occurred while communicating with the analytical engine. " I removed the printer and reinstalled, but keep getting the same error message when you try to open the function scan my computer. I'm albe to open the scanner of the printer itself, but not the computer. Any advice?

  Hello @spinsd , welcome to the forums!

  I saw your post, and I hope that I have a fix for the problem you are having with the scanning on Yosemite. Here are the steps that I recommend that you try and also perform these tasks in the order they are written.

  1. Mac OS X: how to reset the printing system
  2. Repair disk permissions
  3. Restart the Mac.
  4. Download and install the full functionality driver here - which contains the scan software: 7640 ENVY HP e-All-in-One Printer full feature software and drivers series
  5. In addition, to download this Apple driver: HP v3.0 for OS X printer drivers

  Try scanning from the HP software and you should be able to scan, fingers crossed!

  Let me know what happens!

• Because I upgraded my Mac OS Yosemite, the scanner on my MX920 no longer works. I just get a questio

  Because I upgraded my Mac OS Yosemite, the scanner on my MX920 no longer works. I just get a question mark in my garden of Image. It was working fine before the upgrade.

  Hi lalyc,

  Reinstall the printer using the latest drivers on the Canon USA site should get the operational scanner.

  Please click here to access the drivers and software page for the PIXMA MX922.  Once the initial download to your model page, follow these steps:

  1. check that the operating system detected in the "OPERATING SYSTEM" drop is correct and if this isn't the case, please click on the drop down menu to select your operating system.

  2. then please click the red arrow next to the "RECOMMENDED FOR YOU" section and click on the CUPS driver file. When you do, a red DOWNLOAD button will appear. Please click the box below the button DOWNLOAD, and then click DOWNLOAD to start the download. The time for the download process can vary depending on the speed of your Internet connection and the size of the file being downloaded.

  Once you have downloaded and installed the driver of CUPS on the site file, please install also all other elements of the section RECOMMENDED for YOU and the DRIVERS from the Web site.  To install the rest of the software which comes with the printer, please follow the steps above, except for step 2, you can click the red arrow next to the 'SOFTWARE' section instead of the RECOMMENDED section to locate and download the software.

  Once all items have been downloaded, please double-click on each of the items on your Mac to install. If you plan to use the printer wireless, please make sure to install the Canon IJ Network Tool changed after installation of all other software; It should be the last item installed.  Once all items have been installed, please restart your Mac and try to scan.

  I hope this helps!

  It has not responded to your question or problem? Please call or write to us at one of the methods on the page contact us for further assistance.

• Application has failed to start because msa32dl was not found, reinstalling the application may fix the problem

  How can I fix it?
  application has failed to start because msa32dl was not found, reinstaling the application may fix the problem

  First make sure that your system is clean in:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  http://www.eset.com/us/online-scanner/ eset online scanner

  Then answer the following questions:

  brand and model of the pc

  current antivirus

  Operating system and service pack

  What application fails to start?

• This application has failed to start because uncdms.dll was not found. Reinstalling the application may fix this problem. How can I fix it? Kathy

  This application has failed to start because uncdms.dll was not found.  Reinstalling the application may fix this problem.  How can I fix it?  Kathy

  The above explains the problem, my problem is I don't know what it's etymology comes.  Is this windows software, or software from Microsoft or both?  What is the name of the Application?  Help, please!  Thank you, Kathy

  Hi Kathy,

  1 have you made changes to your computer recently?

  2. When you get this error message?

  The uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

  I suggest you to follow the steps and check if it helps.

  Method 1: Uninstall and reinstall Windows Desktop Search

  The uncdms.dll file is installed on your PC when you download the Windows Desktop Search application. Problems with this application's files can cause a missing uncdms.dll of error appears on your system.

  To uninstall the Windows Desktop Search from your computer, you must complete the following two tasks:

  Step 1: Remove Windows Desktop Search from the boot sequence

  To do this, follow the steps below:

  a. click on the start menu, click Run.

  (b) in the Open box, type msconfig and press ENTER.

  c. in the System Configuration Utility dialog box, click the Startup tab.

  d. search and clear the check box for any option that is related to Windows Desktop Search or uncdms.dll.

  e. restart your computer.

  Step 2: Uninstall Windows Desktop Search applications

  To uninstall the Windows Desktop Search using the Add / Remove Programs, perform the following steps:

  a. click the start menu and select Control Panel utility.

  b. double-click the icon Add / Remove programs.

  c. in the Add / Remove Programs, locate and select the Windows Desktop Search.

  d. press the button Delete.

  e. restart your computer.

  Method 2: I suggest do you an online scan and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• How to: format and reinstall the operating system

  Original title: is there a virus that downloads all the images that appear on windows xp family within 24 hours, I have acquired 17 000 images and used to my PC I want to enter windows in any mode

  I can't navigate what whether in safe mode with or without networking. How to flatten the system, which dates back to the original state that I'm not bothered about registering files images etc want just my PC to work

  Hi wendyspeariett,

  1. you receive an error message when you start in safe mode or normal mode?

  2. did you of recent changes on the computer?

  If you have access to the internet in safe mode with network, then you will need to scan the computer to remove all infections from the computer and check if that helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx 

  You can also use Microsoft Security databases to scan your computer

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

  If you want to format new Windows XP installation, you can move forward.

  A new installation is to remove all data from your hard drive repartition and reformat the hard drive and reinstall the operating system and programs empty (clean) hard disk.

  How to install or upgrade to Windows XP

  http://support.Microsoft.com/kb/978307

  How to partition and format a drive hard using the Windows XP Setup program

  http://support.Microsoft.com/kb/313348

• HP5520 - an error occurred during communication with the scanner

  A HP5520 for a few months and all were working well. But today does not scan wireless.

  I'm on a Mac OSX 10.9.2 imac and have reinstalled just the last bundle of driver on the HP website but no joy. The HP scanning utility will show the printer in the list, but throws up this error message:

  "HP Photosmart 5520 series-AirPrint is currently unavailable. Please check if it is connected and turned on, or try again later. »

  If I try to connect through system preferences printers and Scanners it throws up to the following error:

  "Year error occurred while communicating with the analytical engine."

  Any ideas?

  Don't worry, I've now solved with a stop down / reboot everything after you have reinstalled the drivers. I think that, maybe, last week cut off was to blame reboot on the mac has rebooted without the scanner is powered and the scan of the computer had not been activated. A restart of the mac corrected it.

• Solutions of J611 HP 3051 icon disappeared and can not handle the Scanner

  I looked for a solution online. I called HP Support and they are not helpful at ALL. I uninstalled and reinstalled the whole program by using the original CD.

  The HP icon shows only a few items online.  There is no scan option manage AT ALL.  How can I enable and disable the scanner option if there is no evidence to do so.

  The OS is Windows 7.  On another computer with Vista - there is an icon together with solutions and management options to scan.

  What is the problem and why can one person apparently get a response on this forum?

  Hello

  Please try the following package:

  http://ftp.HP.com/pub/softlib/software12/COL37193/al-109013-2/DJ3050A_J611_1315.exe

  Kind regards.

• When using windows scan & fax tool I get: _ 'network processing timed out. Check the scanner settings & network"error

  I am running Vista ultimate on 64-bit computer with a Linksys WRT310n router in LAN mode. I also have a Canon MF4370dn printer that prints screen & documents ok. I can see the printer on the network.

  I'm mainly interested in the function of scan here.
  With the mf scanner set to scan mode of network (according to Canon), I opened the Windows scan & fax tool, I select the WIA Canon scangear printer/scanner/fax to network & I get a panel where you select dpi/jpeg/bmp etc. When I select the function preview or scan I get an error message that says "network timed out treatment. Check the settings of the scanner & network.

  I read a lot of sour comments on the analysis of the network of this machine. It's a shame, because it is a machine of great, fast & compact mono laser. I have disabled the firewall of the router, still no go. I also tried the rout USB with software to reinstall with network for others, printing & for my machine but italways deferred to the network on mine with the same error message.

  I also read where it analyzes only at 300 dpi... so with all these pros & cons I decided to get a good, dedicated, scan that will probably better results of the scanner anyway.

  Thank you for all the good sites & info you have provided.

  Newbie.