Rename "home pc" on Network Magic

Similar Questions

• Network magic pro v5.5.9118.2Pure0 & windows home server

  Network Magic Pro v5.5.9118.2Pure0 will run on a Windows Home Server without interfering with the normal operation of the servers?

  I've tried it on Windows Home Server (which is actually a hybrid version of Windows 2003 Server) and it works fine without any interruption. (Noted however, if you connect a second NETWORK adapter to a separate router, you will lose the network card)

• Not like Network Magic more

  I installed Network Magic on all my computers.  Yesterday, one of the computers is indicated as being on the network, but when I try to limit internet access I get a message saying that he must be upgraded to 5.1.  Why is it so before yesterday, the computer has the latest version? And when I checked the version of the software it doessay 5.1

  I'm also posting this question some time ago, but I have not received a response:

  Hi I have questions activate my license for Newtwork Magic on one of my computers in the home from the office.  I use 5.1.9005.0 - Pure Network Magic Pro ver. 0 there are a total of 3 computers on the network.  2 are laptops Dell with Vista Home.  The third computer is a desktop Dell Precision 330. The office is currently running Windows XP Pro SP3 of worm of 2002, Pentium 4 1800 MHZ.  I have cable internet, surfboard modem, D - link DIR-655 router.  The Office has a D-Link DWA - 552 XtremeN card.

  I installed and uninstall Network Magic 4 times but I still got the same message and yes I ran a clean disk, manually the files deleted and restarted the computer each time. The message I get is: "the license server could not be contacted.  Please make sure you have internet connection and try again. »

  I am currently using the Office to send this message then yes I am connected to internet but Network Magic is not recognizing the connection. On my computer, a laptop, Network Magic says the Office is located on the network, but an alert indicates that Network Magic is not installed.

  Hello

  See this post: http://forums.linksysbycisco.com/linksys/board/message?board.id=Network_Magic&thread.id=18

  You did not include information on your software firewall used on each computer.

  Chiangel wrote:

  I installed Network Magic on all my computers.  Yesterday, one of the computers is indicated as being on the network, but when I try to limit internet access I get a message saying that he must be upgraded to 5.1.  Why is it so before yesterday, the computer has the latest version? And when I checked the version of the software it doessay 5.1

  I'm also posting this question some time ago, but I have not received a response:

  Hi I have questions activate my license for Newtwork Magic on one of my computers in the home from the office.  I use 5.1.9005.0 - Pure Network Magic Pro ver. 0 there are a total of 3 computers on the network.  2 are laptops Dell with Vista Home.  The third computer is a desktop Dell Precision 330. The office is currently running Windows XP Pro SP3 of worm of 2002, Pentium 4 1800 MHZ.  I have cable internet, surfboard modem, D - link DIR-655 router.  The Office has a D-Link DWA - 552 XtremeN card.

  I installed and uninstall Network Magic 4 times but I still got the same message and yes I ran a clean disk, manually the files deleted and restarted the computer each time. The message I get is: "the license server could not be contacted.  Please make sure you have internet connection and try again. »

  I am currently using the Office to send this message then yes I am connected to internet but Network Magic is not recognizing the connection. On my computer, a laptop, Network Magic says the Office is located on the network, but an alert indicates that Network Magic is not installed.

• Network Magic is not updated in the computer security software.

  I decided to standardize my security with Microsoft Security Essentials software.  I uninstalled the previous security software (CA Internet Security Suite) and installed Security Essentials on two laptops.  Now, when I look at the Map Network Magic, I have 3 alerts.

  My router is D - Link DI - 624 Rev C Firmware 2.70.  Network magic is c. 5.5.9195.0 - PURE0, version of the 11.2.9195.1 platform.  My cable modem is D - link DCM-202.

  When I discover the details and alerts from a computer, running Vista Home, SP2, it shows that there is no antivirus installed, the spy software is the defender of widows, and firewall Microsoft Windows is installed.  Alerts that I receive from this computer are that the Antispyware is turned off and the Antivirus is not installed.

  When I discovered the details and alerts of yhe other computer, running XP, SP3, it shows that the Antivirus is CA-Anti-Virus, installed no Antispyware and firewall Microsoft Windows is installed.  The alert for this computer, it is that there is no antispyware installed.

  I removed the two computers to my network card, rebooted and re them connected to Network Magic, but the sill of alerts are displayed.

  How can I get Network Magic to report the correct security software installed on both of these computers?

  Hi, MSE was released after 5.5 NM.  Wait for the next update for full support.

• Network Magic cannot discover a "BEFSR41" router behind a "WET610N" wireless bridge

  Just upgraded to a WRT610N 2 version in my office.  He pulls an IP address from my cable router and distributes IP addresses (this is setup for DHCP) without problem.  I need to extend the home network to another part of the House so I took 2 x WET610N wireless bridges.  Since many devices will have to use the bridge I'll recycle my BEFSR41 as a switch.  I have the router configuration and bridge; the bridge connects to the port "uplink" on the router, and the DHCP has been disabled on the router.  But when I run Network Magic BEFSR41 router cannot find the other side of the bridge.  Any ideas?

  You need this post in the section Network Magic from this forum.  If the router acts as a switch, it will be transparent and not e seen.

• How unibstall Network Magic

  I want to uninstall Network Magic that I installed by mistake.  When I followed the instructions to click Uninstall for it in the programs, I get a pop-up window asking if I want to leave the site add updated softwear. When I type no., nothing happens - Network Magic is still installed on my computer.  If I hit YES, it attempts to add the new version of software (incompatible).  Any suggestions on how to get rid of Network Magic?

  Hello

  Read this:

  http://www.ehow.com/how_5835686_remove-Network-Magic.html

  And use this free version of Revo Uninstaller:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  See you soon.

• Try to uninstall Pure Networks Network Magic, platform Assistant works, how can I get rid of it, can not find in my system

  Have left nmrsrc.dll and 2 files nmspce2.dll.  Tried to delete it tells me that they are protected and hidden, do not know how to display them, nothing doesn't show in Add/Remove programs and windows search can not find them.

  PFure networks Platform Wizard keeps saying it has encountered a problem and needs to close, have removed the remaining files, but cannot get rid of these two.  What should do?

  Hello

  To view the files in XP follow these steps:

  a. in desktop screen click Start, then Control Panel, Panel Options.

  b. click on the view tab and check the box "see the hidden files and folders" and press OK.

  c. you will now be able to see all files and folders hidden on your computer. You can do a right click on the hidden folder and uncheck the hidden box and apply the changes to display it.

  See this article on how to uninstall Network magic: http://www.purenetworks.com/support/faq/13.html

  http://www6.nohold.NET/Cisco2/UKP.aspx?pid=104&VW=1&articleid=21926

  If you cannot uninstall the program, contact support for Network Magic team.

  Thank you very much for trying to help, find the files I had to remove, they do not delete found files in Mode safe and they deleted properly.  When I cliked show hidden and program files did not see them, Safe Mode works perfectly.  Good job!

• Network Magic pro 5.5

  ICH habe computer neue, ich möchte meine Network Magic 5.5 pro konfigurieren, bereit habe ich die von Network Magic Pro license, mein Windo ist 8 Windo

  Network Magic ist already seit zwei Jahren nicht mehr im Handel und matrix server last year often wurden, da Linksys completely auf Smart-Wi-Fi-software (exklusiv as Linsksys Smart-router) umstieg

  http://store.Linksys.com/Cisco-Software_stcVVcatId553232VVviewcat.htm

  Weitere Information können Sie auf der American Forumseite find, deren Mitglieder interesting Hilfsvorschlage veroffentlich haben

  http://community.Linksys.com/T5/Network-Magic/activation-of-Network-Magic-Pro-5-5/m-p/698185#M4484

• Can not activate my Network Magic software after reinstalling

  After a clean install of Windows 8 Pro I installed my Network Magic Software. After installation, I tried to activate my legal version, but it will not accept a connection to save and activate. I discovered that Cisco supports more Net Magic then activation is not possible in the Netherlands. Cisco said that there is no other tool network of Cisco for my WRT-320N replacement and other Cisco devices. Is it possible to activate my Network Magic software in another way (in the United States or in the registry of Windows or Network Magic)? THX Martin

  One of the reasons why software cannot be installed are because of the firewall on your computer or antivirus software. Try to disable the firewall or disable your anti-virus temporarily and activate Network Magic again.

• Activation of Network Magic Pro 5.5

  A few weeks ago my computer crashed and I had to reinstall Windows 7 and Network Magic Pro 5.5. However, it is impossible for me to activate my license.

  After the reinstallation of Windows 7, I reinstalled Network Magic Pro 5.5 and tried to activate it until I reinstalled my firewall and antivirus to Panda Internet Security 2013.

  When you try to activate Network Magic, I said (in translation) that:

  "The license server could not be contacted.  Make sure that you have an active Internet connection and try again. »

  In the last 3 or 4 weeks, I tried several times a week, but not successful.

  Please tell me what to do.

  Thanks for the information, dadayzee and scot2205. One thing is certain, Linksys has lost a potential customer.

• Network Magic

  Where and how can I get a serial number for network magic v5 9195.

  Tank You for any help you can give Me

  Rickie white

  [email protected]

  If I'm not mistaken, it is no longer possible to obtain a license key as the software is no longer sold and is already end of line.

• Network Magic and Cisco router EA4500 UID and password

  I use the 5.5.9150.0 version of the free product. I had my last router, with a WRT400N. Since then, I have installed an EA4500 router to replace the WRT400N. I'm glad that Network Magic works with my new router, but I have a problem: I can't connect to my router via Netowrk Magic.

  Protection status/Wireless / Wireless Protection settings brings up a window that asks you the router user name and the password. I went to the page "Setting Up: Basics" guide of the user EA4500 (page 13) and tried all the values that I had copied in when I installed the router.

  I tried the SSID of the router and the "Linksys Smart Wi - Fi Username ' in the user ID box.

  I tried the "Linksys Smart WIFI password", the network, the Guest network password password and the router password (same as the network password).

  Nothing has worked. I've only connected to the EA4500 using the Linksys Smart WiFi, username and password, so I'm stuck trying to figure what values to use.

  Please help me understand what I am doing wrong. Thank you!

  I stumbled in the response:

  1. start Network Magic and display the network map.

  2. click on the name of the router (just under the router icon).

  3. click on Set Up or manage the device.

  4. the Linksys WiFi Smart Sign In (to the router) window appears.

  5 connect to the router by using the credentials of Smart Wi - Fi that you set up when you have installed the router.

  Now, all router commands will work from within Network Magic.

  :+)

• Delete "Network Magic Folders" from my office?

  Is there a way to remove the icon "Network Magic Folders" from my office?  I don't see what there is need and don't like a cluttered Desktop.

  Thank you!

  Madrona wrote:

  Is there a way to remove the icon "Network Magic Folders" from my office?  I don't see what there is need and don't like a cluttered Desktop.

  Thank you!

  Hello Madrona,

  Yes, open Network Magic. Click on tools. Click on Options. Enter the password. Check the icon of hide folders Network Magic desktop (Windows XP and later versions) and click OK.

• Network Magic and a network printer

  Hello world.  I have a printer in network (wired, not wireless) and Network Magic (5.5.9195.0 - Pure0) shows this device as something totally different.  See screenshot.  The information is reflected is a laptop that I had before.  The IP address is newly affected (was not in the past).  The printer is a Photosmart Premium printer.  I tried to change the NETWORKLIB. XML file (the entry does not disappear), but the wrong information still appears in the network map.

  Any ideas?  Thanks in advance!

  

  Looks like the NIC may have been impossible to remove the information from your old computer from the network and he attributed wrongly to the printer. to correct the problems of network card, see the article on the basis of knowledge of cisco: of Article ID: 19407.

• Network Magic is dead as a product?

  I noticed a lack of support and maintenance of the information of Network Magic.  I also noticed that there have been no updates or upgrades for quite a while.

  Network Magic is dead as a Cisco product?

  Cisco please answer!

  Yes, Network Magic is DEAD!

  any request in this Forum of simple reading.

  no response for a long time, no support no update... NOTHING... He's dead