Repair service is very long

Similar Questions

• Repair process is very long

  Hey,.

  The problem is that ive given my computer for repair nearly two months ago and I still haven't received it back, even though I was told it takes about 3 weeks to fix it. Whenever I give the floor to the service center they say they expect the details arrive. My warranty runs out next month, and I'm obviously interested to get my laptop repaired before that.

  I was therefore wondering if the Toshiba company has no rule on how long the repair process may take?

  Thank you

  Hi mate

  First of all I have to say that my laptop has been fixed by the ASP in my country too, but the repair process went very quickly.
  I have called the ASP at Saturday, send Mobile Monday. Thursday, I received the message about the malfunction and the cell phone Monday was send back to me.
  The warranty covered everything.

  But I think it depends on the availability of the part.
  In some cases, the parties are not available for ASP and the needs of technicians to order these pieces at Toshiba stock head this may take some time

  But don t worry mate. its doesn't matter that your warranty runs out next month because the laptop has already been send to ASP and it it was done while the guarantee was valid.

• HP repair service question

  Hello

  So my laptop crashed the last time because of some power failure and because I couldn't charge more after that my house was without electricity, I sent my laptop back to HP repair service and they changed motherboard with cable charging within the insurance and all works again. I am very satisfied with the service and have no problems at all, but the question is that I wonder if they cleaned the fan after they fixed my laptop otherwise, I let someone clean from inside but I wonder if his need because it was just repaired but I don't know if they clean it by them self to HP repair service.

  If long story short, they clean the fan before and after they fixed my laptop?

  Thank you for the advice,

  Mitchell Jones

  They were probably reused the old fan and I do not know that they have cleaned before re-use. No technology worthy of his name would do otherwise. You could blow compressed air into the slot to aeration with a paper clip, stop the fan from spinning. I'm fairly certain that no dust will soar. If they do not have to clean the fan, you would see the dust.

• Palm repair service is TERRIBLE... I DO RECOMMENDED the USE IT if it can be avoided!

  Palm repair service is so terrible, that I wish I would have paid sprint to repair my phone in one of their service centers. I own a treo 800w on the sprint network and had no major problems on the phone nor my service provider.  I then noticed one day, my phone died while it was plugged into the charger even if the red light was on and the phone itself said: he was in charge. come to know this is a common problem with the phone and I thought I'd try everything in my power b4 I took it to be repaired. I done a hard reset and reinstalled the usb and charger for the phone patches, nothing helps. Sprint short long story said I was out of the 90 store warranty and they could fix it, but they would charge me $125 to do. Luckily for me I'm still covered by the manufacturer warranty 1 year palm so I called palm and they said they would have gladly fix the phone. they gave me all the information needed to send my phone.

  I sent my phone out Tuesday, July 21, 2009 using fedex shipping 2nd day. my phone has been received and signed for the Thursday, July 23, 2009 at 09:37 by one

  P.HERNANDEZ. I learned the turn around time is 5-7 business days and I should wait until my phone in my possession at the end of this period. repair self-service site reflects my phone had been received until July 27, 2009 and the status was "under repair" so I call to check the status and why the process takes so long and the first thing you notice when they answer the telephone is the center of calls extremely noisy which makes it very difficult for the representatives to hear you and vice versa.
  to make matters worse the guy I spoke to 27 told me oh your phone has been set and shipped the 20. and above to discuss with me when I told him that he could not have been fixed by then because it was the day before, I even sent to NASHVILLE, TN in PHARR, TEXAS and then he said, oh I made a mistake, we received it only, but it has not been shipped to you yet.
  Today, 3 August 2009 markes the end of the 7th day since I sent my phone and I have not yet received my phone or an email containing a tracking number at least let me know that my phone has been shipped, so I decided to remind. the guy today told me oh it has not received your phone until the 25 so call back tomorrow or the next day, I once again, politely explain him that my phone was signed on 23 July and he tells me he will check and give me a call to let me know if my phone has been shipped when it closes in 3 hours (23:00 central time) or the morning of Midi
  without a doubt, it's gotta be the worst experience of absolute customer service that I have ever been a part. I was reading a thread on the quality of the repair service offered by palm which was published by another user, almost 1 year ago and I seem to have the same experiece, palm needs to do some major update to accelerate the repair and return of the phones of customers. I seriously considered switching to blackberry. My sister has one and has had a problem with his phone, she received a replacement phone, prepaid box and labels for shipping in 2 days. This is what customer service should look like!

  Finally received my refund of palm, luckily for them I changed service providers of phone that I had planned to do so im still with sprint and I found a flight on the treo pro, cost me about total $ 185 and it came with a rigid protection case and Holster so I could not pass that so im bak on the team... I hope that we have no hardware problem out of this 1

• Tedious and complicated repair services in Hong Kong

  This is the first time I am very angry by using the Apple repair service in Hong Kong.  When my Iphone was mistaken, it was natural for me to search for if repairs in the web of HK of the Apple. In the web, he tries to separate the different types of repair services.  It took several minutes.  Then he asked me my position so that the service provider nearest could be located.  After finding the right provider, I stopped because I did not know that I must go to the web of the service provider to sign up again.  I just thought that I have completed my registration.  When I went to the service provider today and wait for an hour, I was told that I did not in fact any record.  What the * fact Apple?  How this can happen to a company as famous as Apple?

  I can't stop suggesting that the Apple CEO may revise its repair services, to make it easier and faster (at least in terms of recording time and the time of waiting to be served).  Why not show all possible repair the provider service at the very beginning and ask the customer to choose.  If possible, also to show what repair center will have faster services.  And there should be an indication clear to tell the customer if they have finished recording or not.

  Please improve your services.  Just don't know how to make your money from us.

  Thank you.

  Hello Monimok,

  This is not the place to post your concern.   Write to Apple HQ below.

  1 infinite Loop

  CUPERTINO,

  CA 95014

  We are just users like you, here to help with technical problems

• Homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using the homegroup.

  Group residential slow and other problems with it

  Hello!

  I have 3 Windows 7 PC-s (office #1, #2 desktop and laptop). I created HomeGroup and join all computers, so I can access the files on each of them. But my problem is the following: homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using homegroup, because it is slow and every two seconds of loading film. And also needed a few minutes to open the pictures (more than 10 GB in all folders) to a folder in the other PC. Why is this work so slow? I don't think there is a problem with slow wireless router, because I can replace my old Linksys WRT54GL Linksys E4200, which is able to transfer video HD 3D such as Linksys provide. What should I do to fix this? Should I change all the settings in Windows, perhaps in the router...?

  And why my laptop is not always visible to the other PC to homegroup? He see two others and two other sees, but they are not portable. This happens sometimes. But then I still share with homegroup libraries to my laptop and there still other computers see it and all shared libraries. Where is the problem? I also try to change the HomeGroup services automatically, but this does not solve the problem.

  If I forgot something to write, or you need more information, do not hesitate to ask.

  I'd appreciate any help really.

  Hello

  Manually check manufacturers sites WiFi because pilots offered through
  Updates Windows will most often not be later (MS is far behind certifying)
  drivers and many manufacturers do not quickly submit newer versions or not at all). See
  Manual driver update of the methods below.

  The question could be WiFi in fact however try to device (hardware)
  update the driver first.

  What antivirus/security is used? Some of those who will cause problems with the
  Homegroup. Since it happens more often on a single computer that on there
  a check.

  From this link:

  Homegroup: frequently asked questions (also shows how delete and remove homegroup)
  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

  "Only people who belong to the homegroup can see shared libraries. You can also share libraries or files and individual folders with specific people in your homegroup, rather than share them with everyone. For more information, see libraries with your homegroup sharing and keep files and folders to be shared with a specific residential group. »

  Share files with anyone
  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  ==================

  How to upgrade manually the drivers:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as windows
  7 love the updated drivers.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I can't update ipad. It only shows check updated very very long time. No change.

  I can't update ipad. It only shows check updated very very long time. No change.

  Show this message where? Put you up to date on WiFi? If you are, try to update with iTunes. If you don't have a computer and are based on the WiFi only, try this.

  Settings > airplane Mode > on. Who will sign you out of WiFi. Now, do a forced restart. No data is lost during this procedure. Hold on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen.

  Return to settings > airplane Mode > Off. That will reconnect to the WiFi. Try to update again.

  If this does not help, pwer cycle of your router. Unplug it from power for 30 seconds, plug back in and then try to update again.

• Auto update to 27.0.1 - right click menu shows all (very long)

  Firefox just crashed. I then opened it to the top, and it seemed that it was finish auto update to 27.0.1. Once on a page, I click with the right button on a link and found a list very very long scrolling even further. In addition to this, the functions do not work when I click on something I want. I tried to start in safe mode and it still does not work properly. I see for almost a year where firebug was a problem, but I've never had messages that plug in installed.

  As I mentioned in the first post, it was still divided into safe mode. I even restarted the computer and the browser several times with the problem still there. In any case, today it decided magically works properly. I have no idea what happened. I have not changed anything since I posted here.

• Right click menu was very, very long which it wasn't before

  After upgrade to version 20, made a right-click menu got very, very long that it wasn't before. That's happened? Therefore, it is easier to use. All my Add-ons are up to date, if it's important.

  Thanks, I did check the updates also from the page modules. I have Firebug 1.11.2.

  However, now it seems that the problem has been fixed when I started Firefox in safe mode, all modules turned off, then switced on one (try to find who was, I have not), then restarted Firefox again normally: bing, returned to the normal menu.

• 8 Firefox crashes when you click on a link that has a very long URL address

  I use Windows 7. I have locked only with links that have a very long URL, for example

  http://b.bm324.com/public/?q=ulink & fn = Link & ssid = 10573 & id = 50hf3f24ltqgsgf2l342rz7tdtugj & id2 = 4m0o6e8hmn9bixohu56j29j2ah0bf & subscriber_id = aiblbktoaociiexqfdaqifnfacgubpl & delivery_id = adspyssufmivdxikgbynsteprrknbpj & tid = 3.KU0. Bp_cqw.CXq9.MPvF... UDBh.b... l.ApvV.a.Tr8LdQ.Tr8LdQ. - KHXEw

  Can be a DDE problem.

  • http://KB.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

• Hello! Can someone help me with the address of repair service for Palm TX?

  Hello! Can someone help me with the address of repair service for Palm TX?

  Good luck and please, let us know here how it works for you.  We like to know current resources, which can help to solve the problems of people with these older devices.

• FF opens ok, but why is it so very long to load my homepage. I have new laptop, windows 7.

  FF opens ok, but why is it so very long to load my homepage. I have new laptop, windows 7. Can anyone suggest a solution please.

  This has happened

  Each time Firefox opened

  == yesterday to no apparent reason.

  Try running Firefox in questions to troubleshoot Firefox in Safe Mode

• My HP OfficeJet 6500 wireless printer prints slowly with very long breaks during printing...

  I saw a very old post on this but no solution so I'll try a new position.

  Also, I'm not sure I'm even barking to the top of the tree on the right.

  My PC is running Windows 7 Ultimate 64-bit and is up-to-date with all the updates.

  Recently my Officejet 6500 a more printer E710n-z began to print very slow with long breaks and, in some cases, falling output and in other cases simply do not print.  If I print the various printer and cartridge of test pages from the printer itself, they have long breaks but seem to finally print correctly.  I've been playing with that try to circumvent the problem as long as I'm not really sure print the (from the front of the printer) are always correct.

  I uninstalled the printer and all its associated and software reinstalled using the latest download available on the HP support site, but it made no difference.

  After sanding my teeth to a measure of costly troubleshooting, I bought a set of completely new and installed HP cartridges.  Once again, no difference.

  You don't know if it is a herring or not but when I printed him using both iPrint from my iPhone, as well as the HP ePrint feature email, while still having the very long pause he eventually print a text message only correctly.

  Finally, on the first time I printed the properties/test page it printed the HP, logo, displayed while the ink was drying for what seemed like a minute ago, powered form to another page, delayed for awhile and then printed broadband nonsense, form fed once again, and after another long break printed what appeared to be the upper third or the word Windows.

  Sometimes when printing from the iPhone, it will display a low ink message - even if it has a new set of cartridges HP - and sometimes the PC displays an error saying: he can't communicate with the printer.  Can I still access the printer with the function of Windows printer or HP web access so clearly the wireless network connection is still viable.

  What do you think?  This old printer a year and a half has simply turned into an opportunity to mimic the famous scene copied from office space?  Or has someone else observed or experienced this and knows how I could solve this problem?

  Thanks in advance for help you what can offer?

  Howard

  Redmond, WA

  Thank you.  The article that you included was one of the first I found when I started researching this issue.  I also found articles on other uninstallation methods, as well as to remove and clean the printhead - everything I tried.

  Only, the printer is connected to the wireless network.  The power is connected directly to a wall outlet that I follow for the level of tension and the power used.

  The problem seems to be resolved now.  If she does not return to its recalcitrant ways in a few days, I will consider this closed.

  Here's what I did...

  I was trying to uninstall from the control panel.  I noticed that when I would get the ini file, read all entries in the menu 'Start' mistake had been removed, but immediately after recognizing the error it would make it back to the starting point and put everything back the way he found.  I tried to use the Task Manager to kill msiexe point of error, but it could still roll back.

  Then, for who knows what reason, I tried running uninstall directly from the menu start.  This time, when he stopped and I killed the uninstall process, he stayed collapsed.  I then used the Fusion driver to remove any HP printer drivers that followed RevoUninstaller Pro to find and remove all files followed by CCleaner to clean the registry and associated registry entries.  I'm not advertising or advocating, these are just the tools I've used.

  After a reboot, the printer seems to be [finally] completely gone.  I installed the software again and this time it seems like it should be and [so far at least] works properly as well.  I do not think that I messed up [voluntarily] with this printer because I bought a few years ago.  I don't know what caused it, but it seems that I had several instances of competitors or software drivers in layers.

  I made a clone of the disc and then tried again to uninstall the printer.  Even if it was just after a successful installation and a reboot he would always leave with the same error "Unable to read" in the same place.  The error code in the case where the file is the same as that used by other systems for "not enough contiguous disk space.  I have 384 GB free on a 1 TB drive and Norton reorganizes the disk every week so that the error number can be a distraction, but I have yet to find something better to inform me.  What initially may also be why the restore will not complete successfully or the other.

  Ah the joys of PC ownership.  You have to wonder how many PCs get retired every year simply because the owner has not been enough tech-savvy and pay someone else's expensive with no guarantee of success.

  Sigh...

• Welcome screen very long

  Hello

  There is a problem with my laptop - HP ENVY 15-j001er: she starts off very long during the Welcome screen. And it can do not to start at all. I have to reload each time this happens. The laptop is new. I think that happens because of the slow HARD disk - only 5400 revolutions per second. Operating system is windows 8.1.

  What could be?

  Hello

  Good to hear, can I also recommend downloading Malwarebytes on the net (its free) search Google Malwarebytes download and install the program. Open the software and display the top click on "Refresh" once the update is done choose scanner and do a full scan of your system. When the scan is complete click "View the scan results" and nothing found will be listed, and then place a check next to detected objects and click on remove, you must perform a reboot once invited to remove completely all threats...  If you use malwarebytes alongside your Norton Anti virus (regular tests), your system will be initiated. Don't forget to update Malwarebytes

  Checkurtech

• Often quick book hangs for a very long time, when it is updated transactions in SQL Server

  Original title:

  SQLServer

  We have a network running MS Windows Server 2008 Standard R2.  We also have QuickBooks Enterprise V12 multiuser.  I understand that QB is running on a version of SQL Server.  Often it hangs for a very long time, when it is updated to the transactions (there are only 2 users and we rarely data at the same time).  If the problem be helped if we are running SQL server on the server?  Or maybe that we run already?

  Ask the question in the SQL Server forums:
  http://social.msdn.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  or in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer