repeated paper & transport jam on officejet 5510 error messages

Similar Questions

• All-in-one HP Officejet 6500 has: paper size or the type of error message problem

  I have a HP Officejet 6500 all-in-one a and am running Win 7 on a desktop computer.
  I get a paper mismatch (type and paper size is incorrect) error message.
  The printer is not connected to the internet, but it is connected by a USB cable to the computer.
  I look at the instructions to make an internet connection and they were just too complicated. So I download the update of the firmware and ran to the computer. He would not go beyond the area of printer selection where no printers were found. Clicking Refresh has not helped.
  This update of the firmware seems to have solved the problem for some users, but I need to know how you install it.
  Thanks for your help.

  17/03/2015 #2

  I think I solved the problem. I went to the website to download drivers, etc., and, rather than to specify the printer, I clicked the button to let HP identify it. It came with the correct name (see post) preceding. Then, I downloaded and installed the full feature software and driver. The first attempt to print from Excel led to the mistake of page size, but, on a whim, I tried twice and had two successful prints without error. Until further notice, I mark this as solved problem.

  Thanks for your help,

  LK

• PIXMAMX410 model of printer. Received paper jam message. No jam. Still the error message.

  Received message for paper jam / transplanted paperless. Check it, nothing found.  Cannot remove the error message, and I am not able to print anything.  It is my business.

  Fixed me the problem.  Using a piece of cardboard that has been rolled, fed through the printer rolls and discovered a small piece of paper that was filed here.  Problem solved, and I am able to print again.  : - )

• HP officejet 4500: error message always saying load paper in paper on hp officejet 4500 using 10 64-bit windows

  I using hp officejet 4500 10 windows, printer. error message saying "load paper in paper," but I have papers

  NEED HELP! IMMEDIATELY

  Hi donj1,

  I have provided the reset of the printer try to please.

  Please take a moment to read the privacy policy of HP to

• Officejet J6480 error message

  The other day, I started getting the error message following on my Officejet J6480 printer each time that turn it on;  Solution Center: Please wait while Windows configures Solution Center.  After hitting cancel, then get the following error message; The feature you are trying to use is on a CD-Rom or another removable disk that is not available.  After hitting cancel, then get the following error message; Could not find an installation package for the product Solution Center.  Again the installation again using a valid copy of the installation package "Solution Center".  Yet once I hit Cancel and am able to use the printer.

  After getting these messages whenever I turned on the printer, I finally uninstalled and reinstalled the printer software.  It worked for 2 days and I get once more these same error messages everytime I turn on the printer.

  It can be the cause of these error messages?  Other that the uninstalling and reinstalling the software, is there something I can do to solve the problem and make sure it doesn't happen?

  Thank you!!! Steven

  Hi Steven,

  Please, try the following steps and let me know if this is useful:

  1. Insert the printer installation disc or find the installation folder if you installed the software on the web.
     You can find the installation folder by clicking Start > run, and then type % temp % (Windows XP or Vista) or you are looking for a folder in the Windows 7 start menu search box.
  2. Locate the HP installation folder, which will begin with the characters of 7Z.
  3. Enter in the installation folder.
  4. Enter the folder of SolutionCenter.
  5. Find SolutionCenter.msi file (can be easily identified by the different icon)
  6. Right-click on this file and then click on repair
  7. Confirm any warning or any message of error and restart the PC.
  8. Now try to start the center of HP solutions again and check fo any change.

  Kind regards

  Shlomi

• OfficeJet 4620: Error Message

  The splash screen has a message that reads "turn power off, t" is anything that shows, given the size of the screen. The on off button isd does not if you can disable it by disconnecting him. When you reconnect, the return message. Cannot get printer to respond.

  Hello @JustinMurphy ,

  Welcome to the HP forum.

  I understand that you get an error message on your printer, and that the device is not responding.

  I want to help you with this.

  When you unplug the printer, try quitting that it disconnected for more than one minute. Also press and hold the button for 10 seconds (while the unit is unplugged).

  When you plug the printer in, I hope you've had the message.

  If this is not the case, try to remove the ink cartridges.

  I hope we can take the error message.

  If the printer gives a message about lack of ink carts you can try semi full reset the printer.

  I'll send you the steps for a full semi, via private message.

• HP Officejet 5510 all-in-one: HP Officejet 5510 off message paper

  Yesterday, my printer jammed because the paper was not properly in the tray. A message appeared on my 'Out of paper' computer, which was OK, but did not disappear when I put on the new stack of nice white paper properly into the tray. I've tried several things on the internet but nothing works. Strange thing is that the copy function works normally with the samen paper, so I think that the heads of cleaning is not a useful.

  I continued the search for a solution and found one to use printing HP and doctor Scan. The doctor finds errors and to repair the. This resulted in the message of cleaning paper and printing can continue.

• Install the driver for the E704a Officejet 6500 error message

  I get the message: ENUM registry key HKEY_LOCAL_MACHINE\System\Current Control Set\Enum

  Manufacturing: Microsoft

  I have no idea what that means or how to cope. I just want to have a printer on my computer!

  Any help out there?

  Hello Clickmaster,

  Welcome to the Forums of HP Support! I see that you are running an error while trying to install your HP OfficeJet 6500. After some research on the page of Support technique Microsoft , I found this possible solution, that worked for others as well. When you get the error I would you hold down CTRL SHIFT and click Cancel, the installation should continue.

  Please let me know if this succeeded, if you get the error, we will have to look at other solutions. I'll watch for your reply.

  Thank you

• HP Officejet 7612: Error Message: ion of wireless communication has been disabled - HP OfficeJet 7612

  Trying to put the printer on the wireless network, but I keep get message that implemented has been blocked on this machine, please contact your administrator or the person who set up the printer.

  Hey @pennysem,

  Welcome to the Forums of HP Support!

  I understand that your HP Officejet 7612 Wide Format e-all-in-one seems to have a blocking administrator on what prevents you to set up a wireless connection between your printer and your computer Windows 8.1. I would like to help you today with this problem of locking administrator.

  Now I will send you a private Message with instructions on how to perform a Semi full Reset programming on your printer. Please check your Private Messages for instructions.

  If you reset that I have as much solves this problem, please indicate my post as a Solution for other users of the HP Support Forums can easily find these steps. Good luck!

• HP Photosmart C4180: B82C3ED8 Error Message

  My printer has stopped printing and displays B82C3ED8 error message.  Cartridges seem to be stuck more to the left.  I tried to turn off for a while the freezer, then switching all under tension, but nothing's changed.  I can't find any references to this error message - can anyone help?

  Hey there @Eriskay , welcome to the community!

  I understand your Photosmart C4180 has a carriage jam and I wanted to reach and help. I found a troubleshooting guide for you to try below we hope to get the transport unlocks.

  A 'transport Jam' or 'carriage blocked"Error Message is displayed for HP Photosmart C4100 Series all-in-One Printer

  If the jam in transport is not resolved by train to solve the problem, contact us directly to see about a replacement or option trade.

  To send me a 'thanks' for my answer, click the "thumbs up" button at the end of this post!

  Join our technical support to the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  Have a great Friday!

• HP 8600 over Error Message: paper detected does not match format of paper or type selected.

  HP Officejet Pro 8600 more

  Windows XP Pro, Windows 7 Pro

  Error message: paper detected does not match format of paper or type selected

  This error message appears on the printer display panel any time a custom paper size has been set up in Word (or any other application) and the format of paper & type was inserted in the Officejet Pro 8600 paper tray.  This error is generated by the printer regardless the orietation or margins or paper size settings in the document to match the paper size in the paper tray.  When you press 'OK' on the printer display panel, the printer ejects paper correctly.  Because this printer lacks a manual bypass tray, the custom paper is always inserted in the Tray1 and is the only book in this tray 1.  It's a simple tray 8600 more.

  What I am doing wrong?

  Your help is greatly appreciated.

  Unfortunately, you cannot print on a paper size "undefined" with printers. While the functionality is available in word, our printers do not recognize that the sizes of the main paper (these changes according to the country sometimes).

  The reason for this is because undefined paper sizes open the printer and the print job to a certain number of risks, including jams paper or misaligned printing. This is why the function is no more on HP printers.

  I recommend to find a type of traditional paper which is close to the size you want to print on and select in the layout of the print job as a workaround for this problem.

  I hope this helps!

• HP Officejet 4500 failure Analyzer error message.

  HP Officejet 4500 error message when turned on reads scanner failure. Impossible to scan, copy or send a fax! Printer is over 2 years old and was working fine before.

  I've included a link with some troubleshooting steps that may solve this issue for you:

  http://support.HP.com/us-en/document/c00587971

  If none of these steps resolve the problem, I would recommend the HP call to discuss upgrade options. Here is a link with directions to contact HP:

  http://WWW8.HP.com/us/en/HP-information/summary/WW-contact-us.html

• HP 5610 error message

  HP officejet 5610 - error message on the computer says 'unable to communicate with HP scanning software. Please make it was installed properly... etc"I used it to scan last wek and nothing has changed. What should I do?

  Hello

  What is the operating system?

• OfficeJet Pro 8600 false jam transport error messages

  I have two circular messages on my 8600 Pro. The first is that there is a jam in transport. "The print carriage cannot move", it is said. "Open the door ink cartridge access, varnish any jammed paper or obstructions and selec OK." But there is not any paper jam. I checked all sources of paper and they are clear. I also tried to remove one of the ink cartridges, how the cart moves happily all the way to the right and go back to the change cartridge position, with no problems at all.

  Erase this message and you get a cartridge problem... Blah, blah, blad... one or more cartridges is damaged. No they are not. Remove them and replace them all with new, same error message.

  Erase this message and you are to the cartridge jam.

  I tried the 15 second cord reset and remove the printhead (which seems very well). Any other suggestions?

  I love this printer - best thing HP produced in ten years - and I don't want to go back to work!

  It was the black cartridge. First of all, the one I tried. So the good news is, now, I have two of my favorite printer...

  Can't believe that no one else has had the same problem!

• OfficeJet 4620 - stall of transport: transport Jam

  HP Officejet 4620 error: transport Jam. The print cartridge will not move...

  I get this error message, and the printer does not work.

  I watched the video of support, and there is no paper stuck or blocked anywhere, or any obstacle that I can find. I unplugged the printer, etc., as suggested. I can't always the printer to work. The carriage move not left by itself when I open the lid. I heard a noise of rattling after printing... I know that the video States if all else fails it may need service. But I was just wondering if there may be a few other simple fix, I forgot? The White Ribbon seems intact at both ends. The transport does not seem to move at all. I pull it to the left, and he stayed there after the closing and reopening of the coverage. I also removed all cartridges and reinstalled them.

  I called technical support... a new printer is shipped to me... thanks...