Report on the health system, access is denied.

Similar Questions

• An error occurred applying attributes to the file. Access is denied?

  Hello

  I use Windows 7. I reinstall my Windows 7 and since then, most of my file become encrypted (Green shows in Explorer).

  I came across a strange behavior where I am not able to use or to decrypt files. I dint knew the encryption.

  I am the administrator on my computer running Windows 7. I get the following error
  --------
  An error occurred applying attributes to the file.
  
  Access is denied.
  --------

  I have no key encryption nor do I created everything.

  I tried the following:
  When I right click on the file > properties > go to advance > uncheck the encryption > apply changes > continue (user account control) > I get this...

  "An error occurred applying attributes to the file:

  C:\Program Files\Windows Collaboration

  Access is denied.

  Ignore. Ignore everything. Try again. Cancel. »

  It is a small very annoying problem that I need to have go further, any help would be appreciated!

  Points to note:

  Safe MODE does not help.
  I am logged on as administrator, what makes it more frustrating.

  I do not know of the all other folders that Act up like this.

  Please let me know what happens! THESE FILES ARE VERY IMPORTANT

  Hello

  1. what security software is installed on the computer?

  2. what version of windows 7 is installed on the computer?

  3. of what exact file you try to remove the encryption?

  4. have you installed windows on the C partition or another partition?

  Method 1.

  To resolve this issue, give the system security principal of full control on the System Volume Information folder.

  NOTE: The System Volume Information folder is a hidden operating system folder. To display the folder in Windows Explorer, follow these steps:

  1. in the Tools menu, click Folder Options.

  2. on the view tab, clear the Hide protected operating system files check box.

  Follow the steps in this article and give full control permission to the folder. Appropriating a file or a folder: http://technet.microsoft.com/en-us/library/cc753659.aspx

  Method 2.

  I would like to create a new user account and check if the problem still persists.

  Create a user account: http://windows.microsoft.com/en-IN/windows7/Create-a-user-account

  If the problem does not occur in the new user account, you can transfer the files from the damaged to the new user account by using the article user account "difficulty a user profile is corrupted.

  Difficulty a user profile is corrupted: http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Method 3.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  For more information: the file must be decrypted by the user who encrypted the file. The files are encrypted using the Encrypting File System (EFS) are accessible only to the person who encrypted the file, regardless of the other permissions on the file.

  I suggest you to visit these links for more information:

  http://Windows.Microsoft.com/en-us/Windows7/encrypt-or-decrypt-a-folder-or-file

  http://Windows.Microsoft.com/en-us/Windows7/use-a-smart-card-for-file-encryption

  http://Windows.Microsoft.com/en-us/Windows7/what-is-encrypting-file-system-EFS

  I hope this helps.

• Permission error - impossible to enumerate the objects in the container. Access is denied.

  I'm changing my library to my current user permissions and although some of my files are fine, a bunch of them throw the error message: "Permission error - impossible to enumerate the objects in the container. Access is denied. "When I try to change them. I can go in files and folders manually and edit them correctly, but it's a pain in the buttocks seen there are literally the * hundreds * of files that it is coming on.

  Any ideas on how to fix?

  I'm having the same problem, but try to include a file folder on a hard drive support separate than where I had installed windows 8. There are literally thousands of files. To your question:

  1 Yes

  2. Yes, and any other folder on the drive.

  3. to access the folder, I need permission!

  Thanks for your help, it is very frustrating.

  Here's how I solved my problem-
  1. on the root folder, right click, select Properties, select Security tab.
  2. click on advanced
  3. the window that opens should indicate to the current owner. Click on 'change '. Him "select user or group" pop up box appears.
  4. in the text box, type your user name (you should be an admin) and click the button "check names". Your name is replaced by the name of 'official' system (i.e., preceded by the name of the computer and the backslash).
  5. click on OK
  6. the box disappears, sending you back to the advanced security settings window.
  7. a new box appears under ownership, with the text 'Replace the owner of subcontainers and objects' check this box.
  8. I also selected the checkbox "Replace all entries authorization child object with entries permissions inheritable from this object", but I think that I had to run this twice - once with this checked and one without.
  9. make sure that 'everyone' appears in the Permission entries, if not, click Add. The same box that is displayed in step 4 appears again. Type everyone, click on "Check names", then "OK".
  9 valve apply

  I see also folder property can be changed to "everyone" - I have not tried to change all owners of my file to this, but doing so may eliminate the problem altogether if the drive is moved to another computer.

  I hope this helps someone, this problem and the lack of documentation has been quite aggravating.

• Windows cannot connect to the printer. Access is denied.

  From: Steve

  Desperately, I try to print from my laptop Windows Vista Home Premium to a shared printer on my home wireless network.  The shared printer is connected to a XP Home machine.  This machine is wired (via a LAN cable) to the wireless router.  I can 'see' the printer that I want to use but trying to to connect to it. I get the error message "Windows cannot connect to the printer.  Access is denied. "I would be grateful for any help.

  Kind regards.

  -Steve

  From: Alan Morris [MSFT]

  Since the XP machine is HOME, I don't think that the permissions dialog box is accessible.

  Run the XP network sharing wizard again and see if it affects safety correctly on sharing.

  Is the printer you share one that has drivers provided with Windows XP?

  In the meantime we will at least get the printer works for you.

  Create a local printer on Windows Vista; Creation of a Local Port in the form \\XPMACHINE\Printsharename (this will send the files by using the redirector instead of the RPC service).  Install the Windows Vista driver for the device.

  You can print because print$ access is required for printer drivers.

  -Alan Morris

  Windows printing team

  Another response of the community of Windows Vista discussion groups

• Compatible Windows Vista backup the failed 0x80070005: access is denied

  I am more able to backup my PC.  It fails with a 0 x 80070005 (access) refused.  I carefully watched the backup trying to glean what file fails when it tries to read it for the backup.  It fails on a file on the C: drive, but it happens too fast.  I can't determine the file name and THE EVENT LOG IS NOT THE NAME OF THE LOG FILE.  I have no idea how to solve this problem. My last successful backup was dec 2010.

  It would be a great start to save the file whose access is denied when the backup fails.  then we can proceed.

  Hi MickyLee3

   

  You can check if the problem occurs in a clean boot state. You can check if no service interferes with the backup. To perform the clean boot follow step 1 mentioned in the article below, and then try again check in the clean boot state -

  http://support.Microsoft.com/kb/929135

  If the problem is resolved check which service non-Microsoft is the source of the problem; referring to article and following the other steps.

   When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click on restart.

  I hope this helps.

• Add Printer__ Windows cannot connect to the printer. Access is denied

  Laptops have just loaded with Windows 7 Pro on my domain. Try to load printers to a print server. Print server running Windows 2003 R2.

  When I log in with a user profile, I go to devices and printers------click Add a printer-network printer select------I see a list of printers on the print server - choose the printer that I want to load------asked if I have confidence in this printer - click install drver------opens window files Coping - green bar moves as if it were loading drivers------then just before you get to the window asking if you want to make a default printer. open window that says - Connect Add Printer (X RED) for printer Windows cannot connect to the printer. Access is denied

  Changes to device settings to allow the user load the drivers. Check the security access (everyone has permissions) for this printer on the print server.

  Disable UAC control on the laptop. Group Policy has changed restrictions point and print.

  But this same user can log on to another computer on the network, which has loaded XP Pro and can load the same printers that are denied with windows 7 pro

  As a network administrator, I can log on to laptop computers and load A B and C printers.

  So I can log on as a user and then I can load A B and C printers, but as a user I want printer D I get the same message as above.

  Thank you in advace for your help

  This is the solution I received and seems to work.

  You have to go into the local group policy on Windows 7 computers, and not on the server.

  Go to the Group Policy:

  Computer Configuration\Administrative Templates\Printers\Point and printing Restrictions ss SET TO OFF

  User Configuration\Administrative Templates\Printers\Point and printing Restrictions ss SET TO OFF

• Impossible to find information of the domain in the database and access is denied. (Exception from HRESULT: 0x80070005)

  Configuration of the VM Windows 8 of my model fails and causes the following error in log audit Broker rd.

  I'm running vWorkspace 8 with different Hyper-V hosts (without SCVMM).

  clues?

  Broker - INFO - CVdiMachineHyperV::startHyperVClone: cloning xxx, try = 1...

  Broker - INFO - CVdiMachineHyperV::buildParentVHDPath: entering, the folder path is "D:\". ', file name is "xxx.vhdx".

  Broker - DEBUG - CDbManager: Re-use of conn = 0x038215c0 (50)

  Conn CDbManager:keeping broker - DEBUG - = 0x038215c0 (50, lastCount = 49)

  Broker - INFO - CDbManager:connection held 0MS

  Broker - INFO - CVdiMachineHyperV::buildParentVHDPath: the Final folder path is «D:\Quest VMs\ParentVHDs\ vWorkspace»

  Broker - INFO - CVdiMachineHyperV::buildParentVHDFilePart: Extension, part of parent's name is "xxx".

  Broker - INFO - CVdiMachineHyperV::buildParentVHDPath: Final full path is «D:\Quest VMs\ParentVHDs\xxx-20130927090200.vhdx vWorkspace»

  Broker - INFO - CVdiMachineHyperV::startHyperVClone: Call to CHyperVClone::doClone...

  Broker - INFO - CVdiUtils::pnGetDomainControllers: entering, strDnsDomainName is "xxx".

  Broker - INFO - CVdiUtils::getDnsServersForManagedDomain: entering, strDnsDomainName is "xxx".

  Broker - DEBUG - CDbManager: Re-use of conn = 0x038215c0 (50)

  Broker - INFO - CVdiUtils::getDnsServersForManagedDomain: ERROR: could not find the domain managed in the database information for xxx

  Conn CDbManager:keeping broker - DEBUG - = 0x038215c0 (50, lastCount = 49)

  Broker - INFO - CDbManager:connection held 0MS

  Broker - INFO - CVdiUtils::pnGetDomainControllers: WARNING: could not find the domain information managed in the database for xxx

  Broker - INFO - CVdiMachineHyperV::startHyperVClone: domain name into IP [xxx] [xxx]

  Broker - INFO - CHyperVClone::doClone: taken exception. Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))

  Broker - INFO - CVdiMachineHyperV::startHyperVClone: took CJvmErr during the CHyperVClone::doClone call.

  Broker - INFO - CVdiMachineHyperV::doVdiAction: ERROR: create failed.  Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) - call stacks - to System.Management.ThreadDispatch.Start)

  Hi Freek,

  I think you have a support case to open to this question as it seems similar to the one I was talking to Sam earlier, is that correct?

  Thank you

  David

• Unable to start the service to install under Windows 7, get the error 5 access is denied

  THIS PROBLEM IS RESOLVED (PLEASE READ):
  There was NOTHING on the internet that has helped me. While I thought, on the permissions, and I thought of my C:\ (main one with what you have).

  Here's what I did to fix (this applies to all versions on Windows):

  (1) right click on C:\ (or E:\ whatever one holds your stuff)

  2) go to properties

  (3) under Security, click SYSTEM

  (4) ensure that the SYSTEM has all the permissions on ALL

  NOTE: When you do that on that day will be "cannot give permission to C:\boot (for example)" that's fine, just click continue until it's over

  And I'll put the first response as response so that when people search he said answered

  =========================================================

  I went to Serives.MSC and noticed that my Windows Installer service is not started. When I pressed 'Start' (manual, automatic and automatic (delayed start) to start the service, it said 'error 5 access is denied' I'm an administrator, but it did nothing.)

  I tried many things

  I tried 'net user administrator /active' then go to the administrator (the account) and did the same thing, but he did nothing.

  I tried to make another administrator account, and then did nothing.
  When I type "net start MSIServer" in command prompt (ran as administrator), but it says "error 5 access is denied."

  Hello

   

  Thanks for posting the question in the Microsoft Community!

   

  You cannot start the Windows Installer service and get error Error 5 access is denied.

   

  Have you tried to install or uninstall any program?

  The problem may occur may be corrupted Windows Installer engine.

   

  I suggest you follow the steps mentioned below

   

  Method 1: Re-save the installation service

   

  a. click Start, type MSIEXEC /Unregister. in the search box and press enter

  b. Click Start, type MSIEXEC / REGSERVER in the search box and press on enter.

   

  Method 2: File system (CFS) Scan Checker

   

  SFC scan will find all missing or incorrect system files and repairs them.

   

  See the site:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

• Why is-BI Publisher creating reports on the file system in the wrong directory?

  In my Administration of BI Publisher Server, my tabling of report is set to this:
  
  / U02/Oracle/BI/user_projects/Domains/bifoundation_domain/config/bipublisher/Repository
  
  but it's actually create all new data models, reports, etc., in the following directory:
  
  / U02/Oracle/BI/instances/Instance1/bifoundation/OracleBIPresentationServicesComponent/coreapplication_obips1/Catalog/SampleAppLite/root/Shared
  
  I worked for a week full redesign and development of new reports only to find out they're all to another location. Is BI Publisher an example application

  Hi Multiverse,

  Did you select the catalog type "Oracle BI Publisher - filesystem" when cofiguring your repository? If not; Please select it and enter in the desired directory. It seems that the BEEP is now to save your reports / datamodels to OBIEE catalog location. You can copy / paste you are reporting to the new location.

  "SampleAppLite" is the default catalogname in OBIEE when no a vacuum is created.

  Kind regards

  Machiel

• How to solve the problem of access is denied. (5) on win 7 with shutdown command

  I want to stop my second PC using the shutdown command, but I get the access denied message. (5).

  Hi, Carlos.

  Try the solution given here by Ken Warren

  http://social.Microsoft.com/forums/en-us/whs2011/thread/06ad3ab3-AF10-45B7-9042-89df1e0d1bfb

• Trying to install Zune. I get an error message 'cannot create the folder' and access is denied. Why.

  I just installed window7. reloaded many of my programs, but I am unable to load the Zune because it cannot create a folder. Why.

  [Moved from comments]

  I tried your suggestion. However, it did not work. I also did a disc clean after loading Win 7 32 bit and which did not help either. I solved the problem by creating a new folder in the program folder has no name but the left is like "new folder" Zune then installed in the folder. Trying to rename the new folder, it would not except Zune so I just named it 'Phone' Zune works well, thank you for your help.

  David

• Error Control Manager service in the management console "access denied." How to remedy the situation?

  Event type: error
  Event source: Service Control Manager
  Event category: no
  Event ID: 7006
  Date: 15/09/2012
  Time: 20:59:56
  User: n/a
  Computer: RICHARD-PJG4Q7K
  Description:
  The ScRegSetValueExW call failed for ImagePath with the following error:
  Access is denied.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Hello

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums

  MSDN forums

  http://social.msdn.Microsoft.com/forums/en-us/netfxbcl

• Error: Access is denied, cannot delete the printer and also impossible to install programs

  Original title: access is denied cannot remove the device

  my Canon MX340 printer worked fine until the scanner stopped working advises by canon for uninstall programs / drivers and icon / as asked today did nothing working and used to install programs / drivers and can not remove the icon from the Control Panel, access is denied. Clues

  THX

  Hi Tony,.

  Please help me with the following information pricing to this question:

  1 is your computer and the printer connected to a network or domain?

  2 are logged in as an administrator on the computer?

  3. What are the programs that you are not able to install on your computer and provide also us whne exact error that you are trying to install programs?

  I suggest you refer to the suggestion provided by Waseemulla Shariff said on March 17, 2012 in the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/i-can-not-delete-a-printer-from-devices-and/c0d72c68-0387-45ff-b47d-38318b2090b5

  Once you remove the printer successfully, you try to install the printer drivers from your printer manufacturer's website and check the functionality. Consult the following link:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx340#DriversAndSoftware

  If you are not able to install any program on your computer, I suggest refer you suggestions provided by Sandeep Dsouza said on June 13, 2012 in the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/access-is-denied-unable-to-remove-device-HP/1a45f1dd-ba47-47af-90E7-00310a988fcb

  Please answer us on the State of the question to help you further.

• BlackBerry Smartphones the current record access denied on synchronization

  I have an 8330 with OS 4.3. When I try to synchronize with MS Outlook 2007 address book and calendar, I get the following message: "the current record access is denied. Validate your permission to access the folder.

  How do I do that?

  Hello

  Knowledge Base:

  http://www.BlackBerry.com/BTSC/articles/510/KB14749_f.SAL_Public.html

  Please let me know if it helps!

• When I try to reduce my main hard drive in disk management, I get an error: "access is denied".

  Separated from this thread.

  I also have the problem of access is denied.  I use an admin account in Vista Home Premium.

  Separated from this thread.

  I also have the problem of access is denied.  I use an admin account in Vista Home Premium.

  Other attempts reveal:

  Despite the informed retractable utility Go 70 was available for this operation, when I tried 65Gb, 60GB etc. the message was 'Access denied'.  However when I asked only 50 GB the process completed successfully!

  If 70 GB information (in a partition which was ~ 200 GB free) was available was false or error message should have been some such more meaningful instead of "Access denied" or "ask too much."