required boxes

Similar Questions

• [ADF, JDev12.1.3] Attribute of EO: uncheck the required box does not reflect on VO (here, it is necessary to change the prop in the bat VO XML). Why?

  Hallo,

  I noticed that when in an OE I uncheck the required box for a field...

  

  ... do not reflect the changes on the ground of the VO...

  

  As in the definitions of the VO, the check box is cleared, the only way to make the non-mandatory field is manually change the scope of the definition XML VO...

  

  I would like if this approach is normal.

  Thank you

  Federico

  I can reproduce this behavior. Fortunately, it is only a display bug. When you run the application the object entity attribute cancels the incorrectly set required field of the VO.

  A user may be confused by this setting, even if it is only a Visual problem, I will file a bug on the ADFEMG issue tracker. WARNING: this incident handler has no attached SLA. If you need a patch for this that you must file a SR with support.oracle.com (paid the necessary support contract).

  Timo

• Do all click on the required boxes before moving on to the next slide

  I created a screen with three areas of click and the next button. The learner will need to click on all three before click boxes he can click next to move to the next slide. If they do not click on all three boxes, that they must get a message saying: they need to view all content before continuing. Does anyone know how to program the next button to require the three click on boxes to be clicked before proceeding?

  Thanks in advance,

  ~ A

  Issue has been addressed several times in this forum. You don't need to program the next button, but click areas. I guess they don't have to be clicked in order? In this case:

  1. create three user, for each box click variables: v_one, v_two, v_three and give them a default value 0
  2. hide the next button (in the Properties Panel - since I don't know the version, wrong in detail)
  3. for each button click on create an advanced conditional action with two decisions:
     • First decision is a standard simulated action "always."
       IF 1 is equal to 1
       Assign the v_one with 1 (change of variable in the actions for the other boxes two click v_two, v_three)
     • Second decision checks the value of these three variables
       IF v_one is equal to 1 AND
       v_two is equal to 1 AND

  v_three is equal to 1

  See the Bt_Next

  Be sure to have the suspension of the next key point later that the point of putting paused click boxes. This means that we need to shorten the timeline of the boxes to click and check the properties of the button sync

  Lilybiri

• The "Master Password Required" appears whenever I run Firefox, even if it is not needed. How can I stop it comes back every time?

  When I run Firefox (it goes to the Firefox default page) the 'Password required' box came to have the password for the software security device entrance. This default page does not require a password to enter.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• require external dll function prototypes

  Greetings,

  in the compilation of the CVI Options, I checked "function prototypes require" because I think it's a useful security measure. The project includes about 30 files that all work fine except one that relies on the functions provided by an external DLL.

  As a result, these function calls are not prototyped and I get the error 'missing prototype.

  I could imagine two solutions:

  -find a way to functions external prototype

  -exclude a file of this compilation option

  I prefer the first version and doubt that the second option is possible.

  So here's how to use the DLL:

  a typical function call looks like this: (* ext_dll_Continue) (instrument);

  where the address is obtained through ext_dll_Continue = GetProcAddress (ext_dll, "Continuous");

  and ext_dll_Continue has been defined as

  FARPROC ext_dll_Continue = NULL;

  Help how prototype such a function call would be most welcome - thanks!

  Wolfgang

  I do this kind of thing all the time in the CVI. I use the following general method:

  typedef __declspec (dllexport) int (* pfint1) (int); This definition corresponds to that in the .h file

  pfint1 continue;                                    This will be our reference to the external function

  Continues = GetProcAddress (pfint1) (dllHan, "Continuous"); dllHan presumed valid here

  Val = continue (param);                             Call the function in the dll

  Presents all works without warnings. (Prototypes required box ticked.) Of course, you can present different typdefs for the various models of different prototypes that you plan to use.

  JR

• Required user prop in IC field BC

  Hello
  
  I have a problem with Siebel 8.0, I hope someone can help me to understand and solve.
  
  What I have:
  -1 IO_out with some IC including 'IC_One' and 'IC_Two '.
  -1 BC (used by the two IC) with some areas whose
  -> Name
  -> Lnk_Name
  -> Lnk_Type
  -> Top_Expat (which contains a conditional 'necessary' user)
  -1 link between this BC and him more name and Lnk_Name using a table inter on technical Id field
  
  In IC_One, all four fields are declared; in IC_Two, only Lnk_Name & Lnk_Type are reported.
  IC_Two is a child of IC_One.
  
  IC_One 'Name' is created in the process while IC_Two 'Name' was created before. I made sure, it exists and contains all required fields before you call the process.
  
  The question is this:
  When I call the process, an error pops up saying that for the IC_Two instance, the mandatory fields cannot be empty.
  The process should create the new object corresponding to IC_One, then choose IC_Two and create a link between them using the table of inter.
  
  I am sure that the issue is around the BC "expected" prop domain user, for the purposes of testing I inactivated this prop user and check the necessary in this area. It worked well.
  
  I do not understand why Siebel verify user prop on this field when it is not declared in the IC and does not check the required box.
  
  Obvious notes:
  -I have to use the pillar of the user "mandatory." So using the checkbox instead is not an option
  -J' simplified BC and ICs description for the purpose of easier understanding
  -If you think that this description has no information or you need further explanation, I would gladly give information/explanations
  
  Thanks :)

  Ultimately, the incoming data through the IC, is saved in the BC layer.
  If you need to add something to the expression to make sure that it does not raise the necessary clause.

  In some projects, we have a dedicated for interfaces connection, so you can check that in the necessary clause.
  But maybe you have something else that is different between the web service and the rest of the application.
  I think that there is some properties to see if you are working in a context of the user, or in a context of server, but don't remember off the top of my head.

• 2SV v. 2FA for Auto unlock with Apple Watch

  Try to set up the auto unlock with Apple Watch on my MacBook Air (fall 2013) after the installation of Sierra. Get this message:

  

  Off the 2SV using applied.apple.com

  

  ... and still get the same message "2FA is required" box "Security & Privacy".

  What I am doing wrong?

  P.S., rescue email Apple ID has not yet been verified, because it belongs to my sister who lives in a very different time zone, but I don't see how this should matter for the automatic implementation of release.

  The message is mainly to tell you that you must enable two-factor authentication, is not that you should disable 2SV. You will need to disable 2SV before you can activate 2FA.

  You should always activate 2FA it to AppleID.apple.com

  I don't know why you don't see the option to activate 2FA here on the Security section. You have a device running El Capitan or later, or a device running iOS 9 or a later version in your list of devices?

  For Apple ID - Apple Support two-factor authentication

• Aero Peek Thunbnails appears not.

  HP Pavilion P6230Y

  Windows 7

  Mirror drivers do not support Aero effects.

  A running program uses a mirror driver that is not compatible with the Aero desktop.

  HP following Diagonstic tools ran with the error message:

  Memory test failure VC-316-6W video. Device Manager indicates the software and drivers are installed, correct and updated.

  HP support assistant says that aero is disabled. Impossible to activate on screen required box is grayed out.

  Resolution 1600 x 900

  refresh rate 60

  Driver 8.862.3.0 (20110629)

  Uninstall the device driver of miror from Device Manager.  The mirror unit will be another thing that your series ATI Radeon HD 4200 integrated in the maps section. After you have done this, exit Windows, restart your PC.

• Impossible to apply an ICC profile to display. can not understand instructions for color management

  I just upgraded again own computer with Windows7 from my old XP machine.  I have icc profiles for my two monitors.  Under XP, I had nothing wrong with 'apply' or 'associate' or 'use' of these profiles by using the MS color, and both monitors would change appearance when starting a State fully calibrated and profiled.

  Now, in Win7, I followed fairly confusing instructions, go to the color management / devices / select one of the screens / click "use my settings for this device" / add a profile box "Profiles associated with this device" using the add"" button.  Then I click on the correct profile in this box and click "Set as default profile".  Nothing happens.  I can put any weird profile as a default, and nothing happens.

  I don't even know instructions during the effective application of this profile is supposed to happen, but guess it is when you click on "set as default profile."

  "It may be a clue that the color management dialog box fails to identify my poster other than in the form ' generic PnP monitor - NVIDIA GeForce 9800 GT" while the control panel NVIDIA and Windows 'Screen Resolution' box both manage to identify the poster correctly and use their own name i, e, Eizo L768 and Samsung SyncMaster.

  In addition, 'Identify display' in the dialogue box CM works exactly the opposite of how it works in the other two boxes that is Samsung (left) is number 1 in color Mgmt, but number 2 in the control panel Nvidia and Windows 'Screen Resolution' box.

  I'm stuck until I can address this issue, so would be very grateful for any help.

  Thank you

  Thanks the geek for your help.  No thank you somehow to anyone from Microsoft.  None of this reflects well on Microsoft; No to the current Windows 7 CM interface design, not the fact that after years of complaints and messing around with color management that they could have finally gotten the mechanics in place, but still cannot explain, or make it possible for mortals to use it, and certainly not the fact that they create these monsters and offer no support to any well-founded None.  Not a response to a MS person here, not a good answer to similar questions scattered throughout the Web, no after sales support during any period after the purchase of a new operating system of MS qualified (it's supposed to be provided by the OEM, but of course, none of them knows this kind of thing, how can you keep waiting if Microsoft don't?).  So - NO support.

  I can't believe I fell for the hype and purchased a new Windows System.  I swear to you that this is my LAST purchase of windows.  Microsoft, despite the amazing improvements in Win7, still do not understand.

  Here's the answer to my problem, thanks to some photographers and no thanks to Microsoft...

  1 ASSOCIATE YOUR PROFILES WITH DISPLAY AND SET as a DEFAULT value
  
  To apply an existing ICC profile (ICM file created by any process of calibration), follow these steps.

  Control panel / display / change display settings / advanced settings / color management / color (new!)  / Devices / select one of your displays * 1 / click "use my settings for this device" * 2 / if necessary adds profile applicable to the area of "Profiles associated with this device" using the "Add" button (if your profile is not already listed but is available somewhere on the network or the computer) / click on the correct profile in this box and click "set as default profile."

  * 1 the dialog boxes CM do not label your displays just like the other dialog boxes, they seem to lose the manufacturer and the model number information that is available elsewhere, so your display ABC model nn appears as display: 1. Generic PnP monitor .  Also note that at least on my system, display "1" was in fact display '2' in the other dialogs settings display and vice versa.

  * 2 that could think by selecting 'Use my settings for this device' would mean the Windows using your settings for this device (screen), but apparently it isn't.  That means... Well, I don't know what that means.  Perhaps it means that if you do select not her, even the next step (see below) will not help you.

  Good work so far - unnecessarily complex - and tortuous, but has a certain logic.  Unfortunately it is not nothing at all, until you train the secret key.  Well it seems that the above should do what you want, you need to do something that is quite obvious and not mentioned at all in the General discussion of the help and apparently not known by the 67 people who have read my question.  In fact, it is listed in the section to help Ms... at the bottom of the "Description of the color management settings" and after a largely incomprehensible mass of things that appear not to be relevant, there is a link that is not listed in the content at the top and almost impossible to see... To enable or disable calibration loading Windows

  2 ACTIVATE THE CALIBRATION BY WINDOWS LOADING

  Here's the little hidden from the help file...

  1. To enable or disable calibration loading of Windows, you must be logged in with an account of a user with administrator privileges.

  2. Click to open color management.

  3. Click the Advanced tab, and then click change system default values.

  4. Click on the Advanced tab in the color - default system, dialog management, and do one of the following:

     • To allow Windows to load and display calibrations, check the box use Windows display calibration.

     • To prevent Windows from loading screen calibration, clear use Windows display calibration check box.

  5. Click Close in the color management - default settings dialog box of the system.

  6. Click Close in the color management dialog box.

  Not only it obscure, it confounds even by the fact that you are in the same dialog twice, but the second time is the reference color - default system management instead of the color management as it was the first two times.   But only on the second time is the required box enabled to allow you to check or do a system wide setting.  Easy to miss.

  Experts of either MS doesn't know about it and can not find in the help files or the other, or that they couldn't be bothered to answer my question.  In any case a) I hope this helps someone else, and b) I hope that Mrs. lift their game to support and actually meets the future to frustrated and powerless people that I was.  Thanks Microsoft for losing a day of my life.

• Cisco 877W router + wireless WPA

  Hi all.

  I configured the part my 877W router wireless. Right now I use WEP only, but I want to configure WPA (with shared key before) for more secure access. I'm a noob with wireless and I don't have much knowledge about this configuration process / options.

  Please can someone me the correct procedure to configure a work of authenticated with a simple key WPA - PSK WPA Wireless LAN (no beam)?

  I was working with Web interface (option Express Wireless the wireless WEB application security) for setting commands not IOS CLI.

  Thank you very much.

  Set security | encryption | TKIP + AES encryption algorithm

  Set security | SSID Manager | Methods for 'Open' (only)

  Check the 'required' box for key management

  Check the box for WPA

  Enter a key

  As with WEP, keys on the AP and the keys on the clients must match exactly (case, spaces, everything).

  Good luck

  Scott

• CallManager connected to Alcatel via SIP

  Hello

  We plugged a CUCMv10.5 to an Alcatel PBX with a SIP based on this document:

  http://www.Cisco.com/c/dam/en/us/solutions/collateral/Enterprise/Unified-MeetingPlace/1001103.PDF

  (ALCATEL) == sip trunk == CUCM == h323 trunk == Cisco vgw - (PSTN)

  Thing more fine, except two:

  -Ministry of health

  When a call is go Alcatel and SIPUA side of Cisco agent it is queued, the side Alcatel cannot hear the music.

  CUCM inside it is work, work too is when the call is from a H323 gateway.

  -Forwarded calls (see call2.png for call flows)

  The biggest problem is rerouting calls. When the call goes to Alcatel, and the CUCM there is worth a call to mobile numbers (via h323 gw), the call is off, ring once (or shorter), and the call is terminated with the normal call clearing. Tried to debug the sdl, but can't find any error. What has caused this? Some call timeout?

  -Forcing PSG is possible by activating the required box of PSG in the trunk configuration page.

  -Can attach you CCM newspapers covering a test call?

• [ADF, JDev12.1.3] Mastering the form with detail tables: questions about Insertion/deletion, commit / rollback, primary key, handling,...

  Hallo,

  I have a panelTabbed with 4 tabs. In the 1st tab, there is a master form while each of the other tabs, there is a secondary table. Each tab "reads" vo.

  Please see here http://digilander.libero.it/flattit82/OTN_FILES/VoInTabs.png

  I created the graphichs/layout and now it's time to take care of the management of the transaction.

  In the master tab / form

  1)

  Here, I would put a button to remove the master record.

  When I delete a record in the primary table an automatism in the database (MS SQL Server) will automatically delete any registration which are linked to it in the detail tables.

  Could the automated system as this causes problems?

  In the Details tabs / tables

  2)

  I would put a button in each row to delete the line delivering. Can I just drag-and - drop, like button, af line: table the operation "Delete" of the VO istance detail used to create the af: table?

  3)

  If Yes, by clicking on the button performs the default delete operation. But if need to perform some actions before you run the deletion (or, in General, any other operation), how can I do?

  4)

  To create a folder that I use Create or CreateInsert? And what are the differences between them?

  5)

  When I create a new record I need set the value of a field of the VO on which is based the af: table. He filed, let's call it RowDetNumber, is not displayed in the af: table, because it doesn't have be filled in by the user. Mut value is calculated and set "secretly" before posting the new line to the database table. In particular, its value must be calculated as

  Select max (RowDetNumber) + 1

  of table_on_which_VO_is_based

  where some_conditions_on_fields_of_the_same_VO

  
  

  For example

  The VO selects all of the records that have FkId =: value. If value = 3, VO selection records:

  ID RowDetNumber OtherFields FkId

  1   3     1             ...

  2   3     2             ...

  3   3     3             ...

  4   3     4             ...

  The new record must be RowDetNumber = 5.

  I would like to know how permorm this.

  In general

  6)

  If the database tables have 1 or more triggers I have to take care of something?

  7)

  On the book "development of Web Applications with Oracle ADF Essentials - Sten E. Vesterli", I have read it could be problems when you use tables of database non-Oracle with auto-increment fields.

  The advice of author uncheck the 'Required' box in the model.

  All tables in my database have a primary keys that are auto-increment... so I uncheck the "mandatory"?

  8)

  In general how do I set these fields? I have to put in OT, VO or both?

  

  Thank you

  Federico

  Hello

  (1) you will need to re - question child iterators so that they do not look stale data

  (2) Yes. Ensure that the table is PPRed after deleting the line (should happen automatically if ChangeEventPolicy on iterator is set to ppr)

  (3) double click on the button and it creates a bean managed for you. It allows you to check a box to generate the code he would run to remove the line. Everything you put in front of the generated code is your code before

  (4) in the case of tables, use createInsert as it adds the new line to the rowset (transaction)

  (5) suggest to do this use a database trigger and the data attribute value DBSequence VO type

  (6) do not 'drop table' issue in SQL (sorry, couldn't resist ;-))

  (7) If you follow the advice of the author, Yes. What it does, I have it does not throw an exception if a value is missing in the validation of the line

  (8) usually you set whatever it is at the level of the OS and put only things on VO if you want to override the default value for a specific behavior

  
  

  Frank
  

• Identity columns Oracle 12 c in the entity of the ADF

  Hello

  All the PCs in my diagram have their values provided by the new identity column feature in Oracle 12 c. Previously, during backup with sequences and triggers, I would choose the DBSequence type for the attribute PK in my ADFBC entity.

  I can leave Type BigDecimal, uncheck the required box and check "Update on insert", and then the PK is filled in the DB and the entity. However, it is a desirable solution at least.

  How can I tell ADF 12.1.3 I use identity columns, so that I can undo a mistake 'attribute is required?

  User, this feature is not currently supported in 12.1.3. As you have already discovered, you can create a table in 12 c with IDENTITY and use it in ADF (g 11 or 12 c). To some extent, this works. However, you cannot define a relationship master detail using the IDENTITY as PK feature will be created in the DB only after insertion. So in the EO attribute PK remains empty until you at least have published data and refresh the attribute to get the DB assigned ID.

  For an insert master detail, this would mean that you must wait until the parent gets his id before you can set the necessary FK in detail. You can do this, but it's the work you have set yourself.

  ADF uses the DBSequence data type for this kind of work. Here a negative number is assigned to the new line of master and as FK details until the transaction is committed. Then, negative numbers are exchanged by the framework with the now valid PK and FK.

  Timo

• Problem with the Search Page

  Hello

  I'm building a SearchPG. After you have created the VO object and view criteria I drag the view to the SearchPG criteria. When I run the search page I have two questions

  1 > I get 2 fields, i.e. If I search based on a work table and I created a variable binding to JobTitle (i.e. jobName) I see the JobTitle areas (from the select clause) and jobName (variable binding in the search box. I guess I should get only the jobName (bind variable) in the search box.

  2 > the bind variable is necessary. How can I do this as an option

  snaggy - paste pictures!

  Can someone help me with this.

  Thank you

  What creation Bind variable to use in ViewCriteria, uncheck the required box (in the tab dialog box Bind variable Variable) and tab control indications, make index screen to hide

• Validation problem Spry with button "submit"

  Hello

  I'm new to Spry but I encounter a problem, do work at all.  I created a very simple form (table with text Spry field and submit button).  I have read many articles and visited several forums, but I can't seem to find the problem I encounter.  Basically, when I go to preview the page in a browser, the table with the field button and submit the spy text just fine, but when I hit the button send, I see the page refresh and the values that I had in the text box disappear, but nothing ever comes by saying "a value is required. which is what I'm looking for. This happens even if I have not all values in the text field.  Here are the images of what I describe and also the code.  I checked the 'Required' box is checked in the SpryTextField and the action of the submit button is selected for "Submit form."  My setup is Windows 7, DW6 & XAMPP.  You can provide any help would be greatly appreciated.

  Before pressing the button submit:

  

  Browser after pressing the button: (same as above but no message, 'a value is required.')

  

  Code:

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"

  < title > Untitled Document < /title >

  < script src = "SpryAssets/SpryValidationTextField.js" type = "text/javascript" > < / script > "

  < link href = "SpryAssets/SpryValidationTextField.css" rel = "stylesheet" type = "text/css" / > "

  < / head >

  < body >

  test

  < table width = "600" border = "1" >

  < b >

  < td > < form id = "form1" name = "form1" method = "post" action = "" >

  < span id = "sprytextfield1" >

  < label for = 'test' > < / label >

  < input type = "text" name = 'test' id = 'test' / >

  < span class = "textfieldRequiredMsg" > a value is required. </span > < span class = "textfieldInvalidFormatMsg" > Invalid format. </span > < / span >

  < / form > < table >

  < /tr >

  < b >

  < td > < table >

  < /tr >

  < b >

  < td > < table >

  < /tr >

  < b >

  < td > < table >

  < /tr >

  < b >

  < td > < form id = "form2" name = "form2" method = "post" action = "" >

  < input type = "submit" name = "submit" id = "submit" value = "Submit" / >

  < / form > < table >

  < /tr >

  < b >

  < td > < table >

  < /tr >

  < /table >

  < script type = "text/javascript" >

  var sprytextfield1 = new Spry.Widget.ValidationTextField ("sprytextfield1", "email");

  < /script >

  < / body >

  < / html >

  Do yourself a big favor and don't waste time with Spry Validation.  Most modern browsers support HTML5 forms with the required attribute.

  If you need calm older browsers, use jQuery script validate.  It is lightweight and works when the HTML5 support is missing.  You can see an example below. If you press on submit with empty form fields, required fields in pop - up with messages.  View source in the browser to see the code.

  HTML5 form with jQuery Validation

  Nancy O.