retina iMac with wireless mouse problems

Similar Questions

• Problems with wireless mouse when laptop computer HDMI is connected to a TV

  I have a HP Pavilion G series laptop PC, when I connect to the TV using the VGA interface I have no problem, when I connect to the TV via the HDMI so I have the problem. I use a Microsoft 2.4 ghz wireless mouse, laptop connected to an electrical outlet, new batteries in the mouse, if I move the mouse more than 1 foot of the tower top it becomes useless, erratic, moves 6 inches at a time, or not at all, totally out of control. The laptop is about 2 feet from the TV due to the length of the HDMI cable, and I am sitting about 12 feet out in front of the TV with the mouse. As I know, no problem if I find the mouse in 1 foot from the laptop and no problems even at 12 feet awy using the VGA interface. Production of mouse says that the mouse has a range of more than 20 feet. Someone has an idea of what might happen? Last note, I also lookes to the use of the processor at the time and it is only 8%. The mouse model number is 3500.

  Hello said,

  Thanks for the reply.  I'm glad that you were able to solve the problem by replacing the mouse.

  Good luck!

• wireless mouse problems

  My wireless mouse stops working in the middle of my work. I bought the last mouse thinking that would work did the same thing. I can move the cursor, but cannot get it right or left click, so I have to reboot. Often now. Any advise?

  Hello

  First you have listed iMac with iOS systems.  They do not go together.   Unless you use El Capitan with your mouse (which should be the mouse Magic mouse 2 by your description), it will not work properly.   Please update to help your mouse works.

  And when you have a moment, please, update your profile to show you have the devices and operating systems that you use for each.   We love to help, but if your information is inaccurate, life becomes very difficult.

  Thank you.

• Wireless mouse problem

  The cursor is keep to stop and go. Every time when I move the mouse.
  Are their option to downgrade the software?

  Hello

  Thank you for writing to Microsoft Communities. I understand that you are facing problems with the mouse cursor.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. What is the brand and model of the mouse?

  2. the problem occurs when you are working on all windows?

  3 have there been recent changes to the computer before the show?

  Please go ahead and follow the steps mentioned from the link and later a update on the State of the question.

  Mouse, touchpad and keyboard with Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Reference: Troubleshoot a wireless mouse that does not correctly: http://support.microsoft.com/kb/321122

  Please follow these recommended steps and post if you still experience the problem.

• System performance 'Windows' and wireless mouse problems

  I have a HP Pavilion dv7-3 with a mouse Microsoft Wireless Mouse attached model 4000.  So far it has been working well.  Now the top scroll button on the right will not work.  Down works great.  This takes place when I'm on the internet.   Brand x close tabs does not work.  The system seems to start ok but it is slow when loading startup programs.

  I have a HP Pavilion dv7-3 with a mouse Microsoft Wireless Mouse attached model 4000.  So far it has been working well.  Now the top scroll button on the right will not work.  Down works great.  This takes place when I'm on the internet.   Brand x close tabs does not work.  The system seems to start ok but it is slow when loading startup programs.

  Then. "so far"--> indicates the latter.  When he last work properly?  You can use a system restore point to return when he worked last to see if it's related software?

• 8 flow HP will connect with wireless mouse

  I'm 8 HP flow. I need to get a wireless mice for my (Windows 8.1) Tablet PC for an upcoming event.
  
  First of all, I need to know if the 8 workflow HP will work with a mouse and display (the mouse pointer) on the computer screen.
  
  Second, I need to know what kind of mouse will work with it (Bluetooth, wireless, wired, other).
  
  And finally, how do I connect the mouse with my Tablet PC.
  
  Thanks in advance for your help,
  John W
  
  

  I have 8 HP flow, recently I bought HP T800 Bluetooth Keyboard box. The only thing that was missing was the mouse. I tried to use the usb wireless mouse, but used only available for the receiver usb micro usb port mouse.

  The best solution for this is to buy the bluetooth mouse wireless, available with HP and Logitech M557.

• character controlled with the mouse problem

  I would like to make a game in which the character is controlled with the mouse exactly like this game: http://flashdo.com/item/asteroid-wave-game/1053/full_screen_preview

  I guess that the author simply used the code snippet that changes the cursor to an object. However, this causes a game to break the question; If the user makes the cursor off the screen flash and then come back somewhere else, the spacecraft will Warp to that location. Full screen, because the user cannot make the cursor off the screen, this problem does not occur.

  The code snippet using drag-and - déposer, when cursor the user comes out of the screen, the object did follow the borders of the screen Flash. However, given that the user has to hold the left button of the mouse and the cursor does not disappear, it is not very useful.

  Is there a way to control the character exactly as the game above, but when the cursor leaves the screen, make the character well follow the borders of the screen Flash like the drag and drop code snippet don't?

  Also, is there a way to make the box where the character can move smaller than the scene?

  Thank you very much.

  If you check the startDrag function, you will see that it provides the inclusion of the two arguments.

  startDrag (lockCenter:Boolean = false, limit:Rectangle = null):void

  The first is to have the cursor centered on the object or not, and the second is where you can specify a rectangle which limits the area of traffic allowing drag.  What to do in smaller just step specify a rectangle for your needs.

• Connection of the wireless mouse problem

  Hope this is the right forum section.

  in any case, I have a Microsoft Wireless Laser Mouse 8000 with a v3.0 transmitter/receiver for Bluetooth (usb of course).  Since I have a new laptop a few months ago, I had some problems with the use of this mouse.  It does sometimes not work when I turn on the computer, and sometimes at random, it freezes or disconnects, be it it works all of a sudden without reason.  All I have to do to remedy is cut to the mouse, unplug the receiver, then turn it on and plug it in again.  Sounds easy, but it's extremely irritating.  When I got to the laptop, I tried to install the mouse driver.  I always had a message saying "failed to install software" or something like that.  Once accidentally, I managed to get the combine usb configured as a general bluetooth receiver, who did my computer recognize it rather than the built-in bluetooth.  The mouse "works" with or without the installed driver software and with or without bed in the lit bluetooth receiver. With the random disconnects always, of course.  This mouse works perfectly with my old laptop and windows xp.

  News of the computer: Dell Studio, with Windows Vista home premium.  Built in bluetooth adapter (which apparently is a bad thing?).

  Anyway, how I have difficulty or prevent this happening?  Is there a way to get the driver to install properly and who's going to fix it? Better yet, is it possible to make my work bluilt bluetooth for this mouse receiver, so I don't have to use the usb receiver?

  Any help much appreciated.
  Thank you.

  Hi Android5,

  Thanks for posting on the Microsoft answers Forums.

  The following link is the site that shows you what all the hardware and software is compatible with Windows Vista: http://www.microsoft.com/windows/compatibility/

  Please do not hesitate to visit this site to see if your mouse is compatible with Windows Vista or not.

  Be you please perform a clean boot on your system to see if that helps to solve the problem? Please see the following link for steps on performing a clean boot on your computer: http://support.microsoft.com/kb/929135

  After you run the clean boot, please try to uninstall the mouse completely and then reinstall all the drivers to see if you still get the same error message or not.

  Thanks for posting to let us know if this information was useful or if you still need help to find a solution to your problem.

  Robyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP wireless mouse problems

  I bought the new mouse HP wireless, but after a few days it does not work. I changed the battery as well but still the same problem. Please let me know how to solve the problem?

  Hello

  Some mice have Sync buttons of the mouse or the receiver to check for those.

  Looks like the mouse is defective. Check with the seller and HP Support, online documentation
  and drivers, diagnostics and ask in their forums of known issues for the mouse.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Satellite 6100 with wireless connection problem

  I just brought a 6100 Satellite refurbished for children.
  I got a copy of xp pro installed on it and trying to access the Internet wireless, I asks me to enter my network key ect...
  After you enter it I get a pop up message that reads: "network password must be 40 bits or 104 bits according to the network config. This can be entered as 13-5 ascii characters or 10-26 hexadeimal"?
  IM with wide band of sky and the entire wireless on my other computer toshiba laptop was instantaneous. I can't help myself (novice).
  I contacted sky email waiting for response.

  I call (India) and was told that I need service Pack2? I m I downloaded only when getting microsoft updates.

  Hello

  You can check if you have servicepack 2 by right-clicking "My Computer". A window should appear with the 'General tab '. Under "system:" should be an entry with "Servicepack 2". Please check this and give feedback.

  Welcome them

• DV5-1235DX WITH IE MOUSE PROBLEMS

  I RECENTLY BOUGHT a laptop dv51235DX. I HAVE a QUESTION when the HELP of the INTERNET THE MOUSE POINTER SYMBOL CHANGES AND DO NOT WORK IN THE CENTER OF THE WEB page BUT I'm CAN USE IT OUTSIDE THE AREA IN THE ADDRESS BARETC. SO I WENT A BOUGHT A MOUSE AND I HAVE THE SAME PROBLEM. I DO NOT KNOW WHAT IS THE ORIGIN OF THE POINTER TO REPLACE A CROSSAIR AND DOESN'T WORK ON THE WEB PAGE. I PULLED OFF IE AND REOPEN DO WORK AGAIN. IT IS A REAL NUISANCE. Help

  What version of Internet Explorer. you use, or you use another browser, if so which?

  Is it at all sites or only some?

  The issue has happened right out of the box?

• a microsoft wireless mouse will support microsoft wireless desktop 800

  Hello

  I bought a Wireless Desktop 800 (keyboard and mouse). I lost my mouse with the bluetooth dongle. Right now, I have only the keyboard with me. If I buy a microsoft 1000 wireless mouse, bluetooth dongle will be communicating with my keyboard. I mean will work the keyboard with 1000 (dongle) wireless mouse?
  Thank you
  Sofian Manivannan

  Hello sofian,.

  Want to know if you can use the 800 with Wireless mouse 1000 wireless keyboard.

  There is a dedicated Department which deals with questions of Microsoft Hardware, please contact them.

  How to contact Microsoft if you have questions about your hardware device.

  http://www.Microsoft.com/hardware/en-in/support/contact-us

  Hope the above information helps.

• My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse.

  My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse. It runs OSX Mountain Lion (not sure which version) and is a model 27 inches.

  have you tried to change the batteries in the mouse?

• My Microsoft Wireless Mouse 5000 new scrolls only in one direction in Quicken. This seems to be the only program with problems. All the answers?

  My Microsoft Wireless Mouse 5000 new scrolls only in one direction in Quicken.  This seems to be the only program with problems. All the answers?

  Hi retiredinflorida,

  Welcome to Microsoft Vista answers Forum!
   
  It is a known issue using IntelliPoint from Microsoft and Quicken software drivers.  Both parties are aware of the problem and as soon as a hotfix or patch for this problem is available it will be displayed on the Quicken Web site so check with their website on a regular basis.
   
  However, if the Microsoft Wireless Mouse 5000 problems in other applications, you can check the links below.

  The Microsoft wireless mouse does not work as expected if:

  You may want to consider this link to fix the problem: http://support.microsoft.com/default.aspx?scid=kb; EN-US; 838398

  In the case want ot uninstall and reinstall the mouse drivrs use this link: http://www.microsoft.com/hardware/windows7/support.mspx

  Hope this information is useful.
  Let me know if it worked.

  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and let us know
  what you think

• Problem with a wireless mouse when laptop computer HDMI is connected to a TV

  I have a HP Pavilion G series laptop PC, when I connect to the TV using the VGA interface I have no problem, when I connect to the TV via the HDMI so I have the problem. I use a Microsoft 2.4 ghz wireless mouse, laptop connected to an electrical outlet, new batteries in the mouse, if I move the mouse more than 1 foot of the tower top it becomes useless, erratic, moves 6 inches at a time, or not at all, totally out of control. The laptop is about 2 feet from the TV due to the length of the HDMI cable, and I am sitting about 12 feet out in front of the TV with the mouse. Like I said, no problem if I find the mouse in 1 foot from the laptop and no problems even 12 feet away using the VGA interface. Production of mouse says that the mouse has a range of more than 20 feet. Someone has an idea of what might happen? Last note, I also looked at the use of the processor at the time and it is only 8%. The mouse model number is 3500

  I got it fixed. I replaced the HDMI cable, no change, I tried another TV, no change, I moved the feet 12 laptop away from the TV, no change, bought a Logictech M315 mouse, same technology as the MS3500 and everything's fine. Does a lot for the MS3500 mouse.