Run a full system restore

Similar Questions

• Error of full system restore VAIO FZ-430E/B 35 323

  My laptop Vaio FZ-430E/B has been does not start. I replaced the hard drive (500 GB SATA) and used my recovery discs - full system restore. I received the following error message: 323: 35. I watch all the sony Web page and internet, I don't know what means this error message.

  I ran the Vaio hardware diagnostics: no error

  I can't run the Windows Memory Diagnostic tool. I just doesn't work.

  What does mean 323: 35?

  I installed 4 GB (2 x 2 GB) of RAM Corsair. I used the Ubuntu Live CD Memtest. No errors.

• Find files and etc after a race a full system restore.

  I had problems with my computer and I ran the "full system restore" (with backup). How to make the backup of files, etc. back to where they were? When I go to search and type something in this use to be on my computer, I see a file or several files that say MyBack and the file I'm looking for, but I do not know how to restore it back to where it originally was.

  hamntre,
  Thanks for posting.  It sounds like you have used the restore\backup OEM utility to restore the system.  If that is correct, then you will need to check with the manufacturer to learn how to restore your files from your PC.  If you used the backup utility built into XP you just run it again and follow the steps to restore your files. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• full system restore

  I have the system recovery disc four HP and an extra drive (not sure the supplemental what). I need to do a full system restore. When I insert CD 1 of 4
  Need me just a screen with four folders; Preload Boot, EFI, hp, and files:
  bootmgi, bootmgi.efi, PreloadSize and SetInfo.
  I can't do anything with the disc so he could get it back?

  Registration of HP 120-1333w; Model name H3Z76AA; SER. NO. [edited by moderator serial number]; Recorded 16 FEB 13

  I tried immediately press it the ESC and F9 key.  Nothing works for a full recovery.

  I am one of those seniors, 75, people and not a computer expert, so be gentle.  I'd appreciate any help

  to resolve this issue.

  

  The additional disk is unimportant, unless the restoration process he asks.

  You have changed the boot order in the BIOS that the DVD starts first?

  Watch this video about how to perform a factory restore, you don't have to remove the graphics card:

  https://www.YouTube.com/watch?v=dFBWPmy32ms&index=2&list=PLnsZC48QebLpS0g2Ak-yHB6PnPV2PLkZq

• How to recover programs and files that have been written too by a full system restore?

  Original title: data recovery

  Is there a program that will allow me to recover programs and files that have been written too by a full system restore?  I had to do a complete system restore, because the computer has been locked up in a start of the closed loop cycle.

  Hi Apmech9,

  1. don't you restore the computer to factory settings?
  2. do you just restore the computer to an earlier time by using the system restore feature in Windows XP?

  If you restore the computer to its factory settings, you will then get in touch with the manufacturer of the system for more support options.

  If you had just restored the computer to an earlier time using System Restore, you can undo the system restore to revert back the changes.
  See the article "How to undo a restoration of the system after performing a system restore" in this article of the

  Visit our Microsoft answers feedback Forum and let us know what you think.

• NTI Backup Now EZ - full system restore restarts to black screen with blinking cursor

  My Dell Inspiron has recently crashed after installing the last "update automatically", and I had to do a full install of Win 7 OS from a disk Dell provided. I had to go as far as deleting all partitions to get the Win 7 OS to install. Once which was completed, I then tried to do a full system restore using my NTI Backup Now EZ 320 on a Toshiba Canvio 2.0. When he is finished with the restoration, I disconnected the HD and restarted my system... as stated. The system has rebooted and returned to the top with a black screen with a blinking cursor. What happened to the EZ installation?

  Any help would be appreciated.

  Hi David

  You will need to contact support for this product.

  Here are a few links.

  NTI - Support - official website:
  http://www.nticorp.com/en/us/support/contact_tech.asp

  NTI FAQ - Official Site:
  http://www.nticorp.com/en/us/CMS/FAQ.aspx

  Concerning

• How can I find the file that is missing that prevents me from doing a full system restore and stop my security seal glue

  I recently discovered that I have a missing file that prevents me to do a complete system restore and also I

  think it prevents my security seal doesn't stick to connect to Yahoo! How can I restore it?

  Hi Christine,

  Welcome to the Microsoft Community and forums thanks for posting questions.

  Looks like you are unable to run the system restore and unable to connect to Yahoo. Please answer a few questions to refine the question.

  1. What is the file that you are talking about?
  2. What is the full error message?
  3. what happens when you try to connect to Yahoo.com?
  4. Once you get this file missing error message?

  Please visit the following link to ask a question on help forums http://support.microsoft.com/kb/555375

  I would be able to guide you in the right direction, once I get the above information.

• The created performance problems running in XP system restore

  I ran the XP system restore after installing new software for my dsl modem. Now many programs do not run, my computer is continually updated and some updates fail and my computer is slower than ever. My Zune is not yet recognized. What can I do?

  Hello

  · Why do you run system restore after the installation of the DSL modem?

  · What is the number and the model of the computer?

  · What is the service pack installed?

  · You receive an error message or error code when you use programs?

  It will restrict the issue by following the steps below:

  1. check if the error codes and error message appears in Event Viewer: how to view and manage the event logs in Event Viewer in Windows XP: http://support.microsoft.com/kb/308427

  2. search for the installation error code that your computer has saved when the installation failed. To do this, follow these steps:

  a. Click Start, click all programs and then click Windows Update or Microsoft Update.

  b. on the Windows Update Web site or on the Microsoft Update Web site, click on view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.

  (c) in the status column of this window, find the failed to install update and then click on the red X.

  (d) a new window opens that displays the installation error code.

  3. you can follow the procedure of the link below to improve the performance of the question: how to make a computer faster: 6 ways to speed up your PC: http://www.microsoft.com/atwork/maintenance/speed.aspx

  You can also check: your Zune player is not detected by your computer or the Zune software: http://support.microsoft.com/kb/944909

• System not start normally and unable to run chkdsk and system restore.

  Original title: impossible to plan

  I'm doing a system restore because my computer refuses to boot into normal mode, ONLY in safe mode.

  When I go through the process of system restore, I tells me there are errors on my C: drive and I need to check my drive. I try to do it and I said that I have to plan a which runs for the next time my computer starts up, and I can't because my computer does not start normally. Is there a way to get around this to force chkdsk/r?

  Hello

  You can try to perform a checkdisk boot from the Installation of Windows Vista disk and check.

  a. Insert the installation disc.

  b. restart your computer.

  c. click on the Start button, click the arrow next to the button lock and then click on restart. If you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings.

  d. choose your language settings, and then click Next.

  e. in the System Recovery Options menu, click command prompt

  f. at a command prompt, type the following command and press ENTER

  Chkdsk /f /r X: (drive letter)

  g. press y when you are prompted to check the drive the next time the system restarts.

  h. restart the computer and check.

  Note: When you run the disk check, there is a chance of losing the data that you can take a rapidespour of important data before you run checkdisk.

  Hope this information is useful.

• Virus will not let run me the system restore, and I can't understand how to run a system recovery because there is no return upwards for this computer. It's a basic vista.

  When the computer starts, it must choose to leave a program unknown to the system access everything else it shows is a black screen. When you click on allow, he pulls up a virus scanner that says he has all sorts of viruses, but the program is the virus itself, because this virus program is not really on the computer. When you try to run the system restore, it says that this option has been disabled by the administrator. Also, I can't find how to run a recovery of the system and start the computer to its original settings. Help, please. It's not my laptop which is having this problem, but my roommates computer. Thank you for your time, I've ran out of ideas and was seriously in need of a little help. I tried to repair the system running through prerssing F8 in the boot menu and has not worked. also try the system restore via the SafeMode command prompt does not work either.

  Download Malwarebytes' Anti-malware using another machine. Install it in the
  your roommate infected computer in safe mode and run. Accept all default settings.
  Don't forget to do a backup when offered. I hope you find and
  eliminate the infection.
   
  "crashbbandicoot" wrote in message
  News: 351ebb9b-60aa-47 d 2-9b 13 - e309f4ee035b...
  > When the computer starts, it must choose to leave a program unknown
  > access the system all that it shows is a black screen. When
  > you click on allow, he pulls up a virus scanner that says that there are all kinds of
  > but the virus program is the virus itself, because this virus program is
  > not really on the computer. When you try to run the system restore it says this
  > option has been disabled by the administrator. Also, I can't find how to
  > system recovery and boot the computer back to its original settings.
  > Please help. It's not my laptop that is having this problem, but my
  > computer of roommates. Thank you for your time, I'm out of ideas and
  > seriously needed a little help. I tried already running
  > repair system through prerssing F8 in the boot menu and has no
  > work. also try the system restore via the SafeMode command prompt has no
  > not work.
  >
   
   

• Vista not startop after full system restore

  I had a few problems with my computer and decided that I had to do a full restore to the factory settings.

  Seemed to go well until two days.  I just installed Chrome, Vista and AVG updates.

  The comp would not boot, would not repair, do not go to safemode etc...   I did a full second restore, nothing else that factory settings have now on the comp.  Now, I can get it to the password screen / logon, but it will hang there forever.  I can use safe mode with network and I'm trying to understand what should be my next move.

  You mention that you see a blue screen when you start normally.  It might be interesting to analyze the minidump file to see if it has led to what could cause this problem.

  SpiritX MS MVP has a great guide on how to analyze your blue screen of minidumps on this thread.  If all goes well it can help identify you the culprit behind this startup problem.

  I also had some problems after the update to a new generation of OS.  What worked for me is not godly on the list of updates from Windows Updates After you installed a clean OS, update rather than half of the found list, or even less depending on the size of each update selected.  Download updates in small increments seems to have helped me overcome this several times.  It might be interesting to try whenever you decide on the fight against this problem again.

• When I try to run the Vista system restore, I get the message that the restoration of the system is 'off', and there is no screen to turn it back on.

  The message said that "the system protection is turned off. "Turn it on again you can use system restore. The screen that is supposed to appear when I 'click' to enable system restore, does not appear and I get no options of system restore turn it on again. I don't know how he got off in the first place.

  Hi Rod,

  Let's start with a clean boot.

  Note that it is very important to "Hide all Microsoft Services" so that we do not destroy our restore points:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Best regards

  Matthew_Ha

• HP Pavilion dv9330us STOP: 0 X 00000116 (0X872C4AB0, 0X8A9C30, 0x00000000, 0x00000002)... Could not load even windows in safe mode after full system restore.

  I have a Pavillion dv9330us laptop.  My computer crashed after an update has been installed automatically.  I did a complete system restore.  After completing the restoration I was downloading all updates.  after SP2 updates are available.  The computer crashed again after the installation of one of the most recent updates.  The update was probably an update of graphs, I have done research.  Now my computer does not load windows.  I get the BSOD and cannot access the windows at all, not even in safe mode.  I can't do anything for drivers or anything else because I can't even access my computer in cmd mode.  The error code is STOP: 0 X 00000116 (0X872C4AB0, 0X8A9C30, 0x00000000, 0x00000002)...

  NVLDDMKM. SYS - address 8A9C30 base at 8A9C0000, DateStamp 4578eca9

  Help, please... HP says they can do a refurb more money that the laptop is worth.

  Hi Volatus,

  I would say lets you do a system restore using the Windows Vista DVD to one hour before the update that has the problem of the installation and check if you are able to boot.

  What are the system recovery options in Windows Vista?

  I hope this helps.

• Unable to find a way to do a full system restore

  I'm trying to do a complete system restore on my computer but may not know where to look for it. Everything that I keep finding is check the restore points, I need to get my computer back to factory settings. Does anyone have any ideas on how to do that?

  You do not do so by restoring the system.

  Read the info below:

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Photosmart Premium C309a series: full system restore fails to translate by scanning HP operation

  I've had recently have my drive hard iMac replaced. After performing a full restore of the Time Machine backup system, I found that HP Scan does not at all, despite the printer itself its other tasks normally. This means that ABBYY Fine Reader also does not work with HP Scan as his "calling application.

  I use Mac OS X 10.6.8 and run Apple Software Update and downloaded all outstanding HP software. Before my drive failure hard HP Scan worked fine. The complete restoration has installed the version that I have been ongoing now, 2.4.1.

  In order to get the Scan software of course I downloaded originally the complete package of HP in order to configure its features-however, the current version of the printer driver is 4.1.2.

  In the error window that appears when I try to start HP scanning, it seems that the problem may relate to profiles of scanning HP is not loaded into the library folder. However when I look I am not able to determine if something is missing. I suspect that they are there, but is not being recognized.

  As I already have all the software to operate the printer features, why should I repeat the download for the HP scan and the scan function operate again?

  Hi again Gemini02,

  And thanks for your tips.

  Since your post, a new range of printers HP software update became available through Apple Software Update: version 2.16.1

  I don't know what it was, but I am now at a point where all the functions of printer that I trust work once more... In the case of HP scanning, maybe it's my imagination, but it seems with a slightly better interface than before. Still I had to push it in service by going to Mac OSX system preferences / Print & Fax / Scan / open route Scanner; because initially he said he was not available because he was using another application it - but once I did it, HP Scan can be launched independently and worked well.

  Also printing black text seems to behave normally now - also PDF files.

  I'll click on "Accept as Solution" so thanks for seeing me through this issue.