s3620f flash drive problem.

Similar Questions

• USB Flash drive problems

  I have a USB key that does not work. It's a drive 8 GB flash USB 3.0 which has been formatted and works on my Macbook Pro. The problem comes when I try to use it on a Windows device.

  When I format it under OSX Extended it appears under Windows but is empty.

  When I format it in FAT, under Windows it says that the device must be formatted first

  Either way, when I go to format the device on Windows it says that is only 200 MB space

  Any help would be appreciated.

  If you want to use a USB flash drive on the cross-platform (Win, Linux, OSX) computers you have the next chance:

  -MS-DOS (FAT) format:

  

  If you want to start the drive on a PC or use it with older versions of Windows, you may also need to set the partition to the Master Boot Record (MBR) for full compatibility Windows scheme:

  • Click the drive, and then select the tab "partition".
  • In the "Layout of the score" dropdown, select "1 Partition".
  • Click on 'Options' and choose "Master Boot Record" as the type of partition, then click 'OK' and 'apply '.

  Format discs very quickly, although the total time required will depend on the size of the drive.

  The file system resulting is compatible with all versions of Mac OS X, Windows 95, 98, Windows XP, Vista, 7, Windows 8, Windows 10, is one of the most widely recognized and usable file system formats. What makes FAT ideal of the file system to use for external hard drives or USB flash drives that are designed for use in environments with multiple operating systems.

  ATTENTION! The main drawback to the use of FAT32 is the file size limit, which limits the files on the drive to be 4 GB in size or less. If you need single files to be larger than 4 GB, use exFAT, even if you lose compatibility with older versions of OS X and Windows.

  -Format in NTFS and use a program like Paragon NTFS on your Mac ($ 15/20).

• ScanDisk USB Flash Drive problem after upgrade to El Capitan

  After the upgrade to El Capitan, I can't access the vault secure on my USB Cruzer facet flash drive. I have Plug and display files as usual but when I try to open the safe, I get the message ' Scan Disk Secure Access V 2.0 requires San Disk USB Flash Drive. Please insert one. »

  The Flash Player has worked fine before the upgrade to El Capitan and I can still use the files outside of the secure vault but, basically, I cannot now access the secure vault. I'd appreciate any thoughts on how this can be resolved. I only am not an expert so please, keep it pretty simple.

  Sounds like a problem of compatibility with the Secure Access software and the OS X El Capitan of SanDisk.  Try download and install the latest version of Secure Access of SanDisk.

  It seems also be other users having the same problem, you may get better assistance with this through SanDisk.  Someone else said that upgrading to the latest version of Secure Access has solved the problem.

  http://forums.SanDisk.com/T5/SanDisk-SecureAccess-2-0/SecureAccess-2-0-and-El-CA Dube/td-p/347378

• USB Flash drive problem

  My USB FLash drive is a Transcend JF V30 4 GB, the problem is when I connect it, it shows the safe removal icon in the system tray, but don't show as a removable disk in "Cpmputer. I've included a screenshot.
  

  If the screenshot isn't visible, click here

  It is probably a case of unassigned drive (USB key).

  1. right click on my computer icon

  2. click on manage.

  3. go in "Disk management" / removable devices and assign a drive letter it manually.

  4. right click on the drive without letter & click on "change drive letter and paths...". »

  5. click on 'change '.

  6 assign an alphabet.

  7. click on OK.

  There should be an unassigned drive exists in the disk management table. I'm so sure because your USB 'plug & play' detects the drive & drive (Hardware) is also correct on the other machine.

  S.Chatterjee

• SanDisk extreme 64 GB usb 3.0 flash drive problem

  Hi, my sandisk extreme USB drive is recognized as a hard disk, which appears in the section hard drives instead of the section of removable storage. I wonder how to solve this problem. Although it does not use normal with this drive, but it's just strange.

  PS. I am using windows 7 ultimate x 64

  SanDIsk was fixed drives and non-removable for awhile when he tried to support Windows 8 MS Go features.  There is no fix or the possibility to design autour.

• BlackBerry Smartphones Flash drive problem

  Some web pages need flash player to work, as far as I know, BB propely don't support, how can I solve the problem

  It's just not possible to view these pages.

  You might ask the administrator of the site to put at disposal a mobile site optimized, since most mobile devices do not support Flash.

• Flash drive problems

  Hi, there is a setting somewhere in the settings of the flash that once verified that it causes movies to hand and pad every 20 to 30 seconds.  I found front and unchecked it but movies are suspended again and I was wondering if the system ticked the box... Any help is appreciated. Thank you

  Original title: there is a setting that when checked it causes movies hang... the setting is in flash affecting somewhere...

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing. I would like to ask you:

  • What browser do you use to watch movies?
  • The problem is specific to one Web site?

  You can check the following items to help Flash Player and check if it helps.

  Steps to troubleshoot Flash Player on Windows 8

  Flash Player Help

  Hope this information was useful.

• Removable USB Flash drive problem

  When I try to copy the document on USB removable Flash disk, then suddenly a display showing: failed to copy... (name of the file). Failed to create the directory or file.

  I'll aprecite your help.

  Looks like you are trying to copy a folder in a location that is marked as a system file.  Try to make a folder inside your "My Documents" folder, and then copy into that.  If this does not work, please indicate the details of what you are trying to copy and where you try to copy in.

  I hope this helps.  Good luck.

• After fake antivirus AVG flash drive problem

  Hello

  I've seen several posts for the same thing but have not seen the instructions to fix. I think I deleted manually malicious software AVG with the instructions I found on the web. I uninstalled and reinstalled Flash Player. However, it does not work. If you look in Add/REMOVE programs Adobe Flash Player appear but there is no match to him. I am running Windows XP Media Edition with IE8 (32-bit). I was using the latest version of Flash Player.

  Thanks for your help.

  Check if you have the "kill bit" for the game of Flash Player:http://forums.adobe.com/message/3432049#3432049

  Change nothing manually; If you find that the "kill-bit" is set, remove it with the download at the bottom of this post http://forums.adobe.com/message/3434922#3434922

• does not recognize the flash drive. I get a code 28, pilot not available and the code 19 registry damaged. How to solve this problem?

  Original title: Pny flash drive problems

  I used my flash drives on my pc with xp as os without problem. I then took the same flash drive for my laptop with the windows operating system 7, I opened the files. Then I went to the computer with xp, and the pc does not recognize the flash drive. I get a code 28, pilot not available and the code 19 registry damaged. How to solve this problem?

  Hello

  Do you see these error codes in Device Manager?

  Plug the flash drive and run the Fixit of the article below and check out them.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  See also the section below, which might be useful in solving the problems of USB devices.
  Advanced troubleshooting tips for General USB for Windows XP problems
  http://support.Microsoft.com/kb/310575

• Flash drive is not detected

  Original title: Flash drive problem

  I got my player wiped clean flash caused by a virus. Now, when I insert the disc nothing happens. I am not very informed when it comes to these things, but I thought that my data would be entered on the drive again, just like the first time around. Made null and void by car when I had the deleted info?

  I have a laptop Compaq Presario with Windows Vista Premium. Also, I just had the motherboard replaced, but I don't think it would have something to do with it. I appreciate your help!

  Thank you
  Elda

  Hi Elda,

  Thanks for posting the question in the Microsoft Community!

  The USB is not detected.

  1 have you tried in different ports?

  2 are you able to use other devices USB?

  I suggest you follow the steps:

  Method 1: Run the fixit

   

  See the site:

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Then, as all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.

  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the steps:

   

  a. click Startand then click Control Panel.

  b. click System and Maintenance, click System and then click on Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, double-click on to expand Bus USB controllers, right click on the controller host, click on uninstall and click OK.

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  d. repeat the substep c to uninstall all items under Bus USB controllers.

  Now, restart the computer, and all USB controllers will be installed automatically.

   

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

• Windows 7 USB Flash drive - if I click on Scan and difficulty after you insert the disk, it erases my files

  Original title: Windows 7 USB/Flash drive problems

  In Windows 7, if I plug in my USB drive, the message box appears titled ' do you want to scan and difficulty of removable disk (e :))?»  If I click on Scan and Fix, he deletes my files (or so I thought).  I hope that the files are still there and I have simply can't see because the drive is FAT32 and not NTFS (it says that most of the drive is NOT of free space, so I assume that the files are still there).  What should I do to see / access files?

  Note: A reader, I never selected "Scan and repair"... so I can still see/access files.
  On the other drive, however, the first time I plugged it on Windows 7, I clicked Scan and Fix and it erased all the files on this drive (I guess).  This of course got me very angry.

  Hi MichaelGramm,

  It seems that the file format has been corrupted. You might consider formatting the drive in NTFS file system and check if this solves the problem. For Windows 7, the best choice for hard disks is NTFS.

  Note: Make sure that you back up the data before formatting the disk.

  See these articles for more information on formatting disks and flash player:

  Create and format a hard disk partition

  http://Windows.Microsoft.com/en-us/Windows7/create-and-format-a-hard-disk-partition

   

  Formatting disks and drives: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/formatting-disks-and-drives-frequently-asked-questions

   

  Caution:

  Formatting erases all existing files on a flash drive. If you format a flash disk that has files on it, the files will be deleted.

  Hope this information helps.

• Problem with OTG USB Flash Drive - Lenovo a7000

  Hello
  I recently baught a Lenovo A7000 and it's great. I've set my default storage in the form of SD card and many applications are installed on the same, but the problem I am facing is when I connect to the USB OTG flash drive (it works fine). When I take it apart all the applications on my SD card are not visible on the home screen. However, girls are on the only sd card, but the just icons are not displayed. Whenever I connect OTG all apps are visible again after removing the OTG same problem each time.
  Please help me solve this problem. I want my apps to install to sd card, but not on the drive Flash OTG.
  What should I do? Thanks in advance

  Well, the problem is solved only when restart us the machine, but it's still
  not convenient to reboot each time that you insert an OTG. He really needs a
  Difficulty again.

• Problem with 2 USB flash drive in Windows XP sp3.

  I have a USB 2 pci card - USB 2 card, with the hub 7 ports (powered) USB. Sometimes, everything works fine. Most of the time I can't access flash USB dirve. Printer, scanner, camera, photo, mouse, all connected work very well. Plug the flash drive and errors occur. The flash player works fine in laptop (Win xp sp3). Difference between the two machines, the laptop has only 2 USB ports. Have tried to uninstall the USB controllers and re-setup. Flash drive works fine in the desktop integrated USB 1.1. Have checked with Kingston USB drive flash technical support without success.

  When dirve flash does not, Device Manager displays the flash player at the top of the page section of controllers USB bus, as well as generic USB (USB 2?) hub. When the flash works do not drive, hub Generic USB appears in the second USB bus controllers.
  Someone help? Please, I beg you.

  Hello

  Tried your suggestions, without success.

  Have now connected powered hub USB 2 on my edge USB 1.1, with all devices USB works fine.

  Probability of problems seems to be my pci - USB 2 card.

  Being disabled, it is very convenient for me to have the hub USB 2 powered on my work surface to facilitate the connection of my devices.

  Thanks for your help anyway.

• Problem with 32 GB cruzer flash drive

  Hi all

  I recently created a ubuntu USB - HDD with persistence on a 32 GB cruzer USB flash drive.

  The installation goes very well, the operating system started, and he was save the changes.  I proceeded to install all the recommended updates as well as a lot of packages I wanted.  I got a warning that the aircraft was running out of space.

  It has been partitioned with 2 GB (FAT32) for the OS and the remaining 30 for persistence (ETX2) (where all data and changes are written in)

  I used Gparted to remove the persistent partition so I could extend the main operating system partition.  Once I did, I've recreated the persistent partition.  Who had done the flash disk unbootable.  No problem, I thought, I could start all over again.

  However, I was wrong.  I'm unable to format the drive now at all.  I get an error message saying it was write protected.  I tried vista windows, format win7 and Linux to try.  Ive used the tool of HP and Gparted or Fdisk disk under linux.  Same dd on linux does not work.

  Is there a way I can force the write protection off?  Or use a brute force tool format?

  There is no hardware on the device switch entry switch protect on or off.  I'm afraid I might have permanently damaged the drive.  Any help?

  Thank you

  "Any help?

  There is no solution for this problem.  Return it to SanDisk for a replacement.

  http://KB.SanDisk.com/app/answers/detail/A_ID/5232/~/return-material-authorization-(ARM) - process