Same code in two documents 1 works 1 does not work? Help

Similar Questions

• How I fixed my USB ports not working not problem. Two ports left side previously does not... HP Dv7

  So I do not know what is not "where it will honestly, but put there just to try to help someone else who has struggled with this as long as I did it...» I ended up having my two USB ports on the left side (turned out to be my 3.0 ports) working again when they recognize nothing. I could use the USB 2 on right 2.0 ports, but the transfer rate was terrible.

  My answer on another question where someone had a similar problem... good luck!

  'Hi. '

  Not sure if this will help, but I had the same problem, the two ports on the left did not work on my Dv7. All this time I thought that the USB on the right were my 3.0 ports so I thought that would be nice, but it's been over a year that I initially had this problem and made a bunch of maintenance of the system meant that I would look through it again. In any case, I went to the Device Manager through the computer management tool. I know that you can go straight to the Device Manager, but just give you exactly how I did it. You can search just to start computer management.

  So I chose Device Manager in the menu on the left side and it looked like ordinary Device Manager. Went down to Universal Serial bus controllers... at this stage, I watched the action menu on the right and select more actions, opinions and you click Show hidden devices. After that I went through my USB controllers one by one as I had done many times before and checked them, tried the update of drivers, etc... Under the USB controllers Section, I noticed something like xHCI Host controller of compliance Test... I right click it and went into its details, I tried the driver updated and installed the new driver. 2 new USB controllers immediately arises: Renesas Electronics USB 3.0 Host Controller and root hub.

  Switched on a test drive from the right thumb to the left and the computer instantly recognized and installed the driver for the stick.

  And that was all... hope it helps even if this is later. "

  Hi @klark1kent,.

  Thank you for visiting the Forums Support HP's, welcome and thank you for the important information.

  Have a good week.

  Thank you.

• My documents and photos library does not open, he said that he is no longer works.

  Original title: why is not open my documents?

  My documents and photos library does not open, my photos will only be ope if I go to the photos app. Regarding Documents, when I try to open the files it wont open and it says that he is no longer works and that it can be safely removed from the computer and will not affect the files that are included.

  Any help will be appreciated

  Hello

  It seems that the library settings are corrupt. Delete us the current settings and restore them to their default values.

  Refer to the steps suggested by Ronnie Vernon on August 24, from this link.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-files/get-message-documentslibrary-MS-is-no-longer/cb7500b1-201C-4269-8e07-d5c4ce472bae

  Hope that the information provided is useful. If the problem persists, answer here and we will be happy to help you.

• First and After Effects crashed. Uninstalled is not for them. Use the cleaning tool. I deleted everything else. Tried to install CC again and it fails. 201 error code, I followed the steps and it does not work.

  Hello team,

  First and After Effects crashed.

  I tried to uninstall the utility (Mac OS). Uninstalled is not for them (which has worked for other applications).

  I used the cleaning tool. It seems to work, but the uninstaller for first and AE in the utility remained.

  I deleted everything I found CC remaining manually.

  I tried to install CC again and it fails. 201 error code, I followed the steps and it does not work.

  I don't know what to do anymore.

  Could someone help me?

  Virginia

  I got the help of Adobe support, they sent me another link to download Adobe App Mgr It was apparently a network problem but, and it was resolved after a few re-tent.

• How to display two documents side by side - PDF not stacked?

  How to display two documents side by side - PDF not stacked?

  In the Acrobat preferences turn off the display of the tabs.

• Printer print, when I print documents to the right side of the document gets cut it does not finish what was on the screen.

  When I print documents to the right side of the document gets cut it does not finish what was on the screen.  This happens on all documents.  I don't know what to do.  I got a HP Photosmart Premium and he did it so I thought it was defective and bought a HP 7520e all in one and it does the same thing.

  Hello

  All changes made to the computer before the show?
  Method 1:
  See the link, run the Fixit and check.
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/en-us
  Method 2:
  If the methods above do not solve the problem you can check this link and follow the steps.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  Method 3:

  Try to adjust the alignment on the other side. Follow the steps.

  1. Click Start.
  2. Choose Control Panel.
  3. Choose a printer.
  4. Choose preferably to the printer.

• code 511 undetected fan and the fan does not turn or unraced where do replacement or is this question solfware

  code 511 undetected fan and the fan does not turn or did not run where do replacement or this question solfware please help

  [Moved from the community centre of Participation]

  Fan errors are usually hardware problems. There is a fan in the case including detector does not detect that it is available or spinning. This could be a problem with the real fan or the fan sensor.

  Does this have to do with? Are you talking about an error that is displayed by a Windows machine? If so, what version of Windows? When the error take? At boot time? Before or after that Windows allows you to open a session? When you provide no details, it is almost impossible for anyone to help.

• Printer all-in-one HP 5520: document in the queue does not print

  Printer all-in-one HP 5520: Document in the queue does not print

  Hi Anita,.

  Welcome to the Microsoft community where you can find all the answers related to windows.

  According to the description, you are having problems with printing.

  1. do you get an error message when you try to print?

  2. is the problem with offline or online printing mode?

  Perform the steps in the link and check.

  Why can I not print?

  Meet us if you encounter problems while printing or any other problem of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• Good afternoon. I bought a creative cloud subscription (one year) with a virtual prepaid credit card. I remembered renew two days later, but Adobe does not accept the new card. I don't know what I'm doing. Help me please

  Good afternoon. I bought a creative cloud subscription (one year) with a virtual prepaid credit card. I remembered renew two days later, but Adobe does not accept the new card. I don't know what I'm doing. Help me please

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• For about two weeks the right click does not work in firefox, how to solve this?

  I have always used the Nightly of Firefox version, so I thought it was a bug in the new update. But now I have completely removed nightly and installed the normal Firefox, but still nothing happens after having right in the screen > in, for example the bar bookmarks, it does not work properly, but not anywhere while browsing!

  The application databases

  Name: Firefox
  Version: 32.0.3
  User Agent: Mozilla/5.0 (Windows NT 6.1; rv:32.0) Gecko/20100101 Firefox/32.0

  Reports of incidents for the last 3 days

  All Crash reports

  Extensions

  Name: Download YouTube videos to MP4
  Version: 1.7.28
  Enabled: true
  ID: {b9bfaf1c-a63f-47cd-8b9a-29526ced9060}

  Name: DownThemAll!
  Version: 2.0.17
  Enabled: true
  ID: {DDC359D1-844A-42a7-9AA1-88A850A938A8}

  Name: Clear Cache button
  Version: 2.7
  Enabled: true
  ID: {4cc4a13b-94a6-7568-370d-5f9de54a9c7f}

  Name: SoundCloud Downloader - Technowise
  Version: 0.87
  Enabled: true
  ID: {c8d3bc80-0810-4d21-a2c2-be5f2b2832ac}

  Name: convenience store
  Version: 1.1
  Enabled: true
  ID: [email protected]

  Name: avast! Online security
  Version: 9.0.2021.112
  Enabled: false
  ID: [email protected]

  Name: F.B. purity - cleans Facebook
  Version: 9.3.2
  Enabled: false
  ID: [email protected]

  Name: gTranslate
  Version: 0.9
  Enabled: false
  ID: {aff87fa2-a58e-4edd-b852-0a20203c1e17}

  Name: Lightbeam
  Version: 1.0.10.2
  Enabled: false
  ID: jid1-F9UJ2thwoAm5gQ@jetpack

  Name: TinEye Reverse Image Search
  Version: 1.1
  Enabled: false
  ID: [email protected]

  Graphics

  Description of the adapter: ASUS AH3650 Series
  Drivers: atiumdag atiumdva atitmmxx
  RAM card: unknown
  ClearType settings: Gamma: Structure of 2200 pixels: ClearType R level: 100 improved contrast: 100
  Device ID: 0 x 9596
  Direct2D Enabled: Blocked for your version of the graphics driver. Try to update your driver graph version 9.6 or newer.
  DirectWrite Enabled: false (6.2.9200.16492)
  Driver date: 01/09/2008
  Driver version: 8.452.0.0
  GPU #2 Active: false
  GPU accelerated Windows: 0/2 base (OMTC) blocked for your version of the graphics driver. Try to update your driver graph version 9.6 or newer.
  Vendor ID: 0 x 1002
  WebGL Renderer: Blocked for your version of the graphics driver. Try to update your driver graph version 9.6 or newer.
  windowLayerManagerRemote: true
  AzureCanvasBackend: skiing
  AzureContentBackend: Cairo
  AzureFallbackCanvasBackend: Cairo
  AzureSkiaAccelerated: 0

  Important change preferences

  accessibility.typeaheadfind.flashBar: 0
  Browser.cache.Disk.Capacity: 358400
  Browser.cache.Disk.smart_size_cached_value: 358400
  Browser.cache.Disk.smart_size.first_run: false
  Browser.cache.Disk.smart_size.use_old_max: false
  Browser.cache.frecency_experiment: 4
  browser.places.smartBookmarksVersion: 7
  browser.search.useDBForOrder: false
  browser.sessionstore.upgradeBackup.latestBuildID: 20140923175406
  Browser.Startup.homepage: topic: Home
  Browser.Startup.homepage_override.buildid: 20140923175406
  Browser.Startup.homepage_override.mstone: 32.0.3
  Browser.Tabs.Remote.AutoStart: true
  dom.mozApps.used: true
  extensions.lastAppVersion: 32.0.3
  font.internaluseonly.Changed: false
  make. Name.sans - serif.x - West: Cambria
  make. Name.Serif.x - West: Cambria
  GFX. Direct2D.disabled: true
  GFX. Direct3D.last_used_feature_level_idx: 0
  keyword. URL: https://www.google.com/search
  layers. Acceleration.Disabled: true
  Media.GMP - gmpopenh264.lastUpdate: 1405814443
  Media.GMP - gmpopenh264.path: C:\Users\Ramon\AppData\Roaming\Mozilla\Firefox\Profiles\cflwd3c1.default\gmp-gmpopenh264
  Media.GMP - gmpopenh264.version: 1.0
  Media.GMP - manager .lastCheck: 1411894750
  network.cookie.prefsMigrated: true
  places.database.lastMaintenance: 1411894888
  places. History.expiration.transient_current_max_pages: 33538
  plugin.disable_full_page_plugin_for_types: application/pdf,application/vnd.fdf
  plugin.importedState: true
  plugin. State.npezffpi: 0
  plugin. State.npovshelper: 0
  Print.printer_Foxit_Reader_PDF_Printer.print_bgcolor: false
  Print.printer_Foxit_Reader_PDF_Printer.print_bgimages: false
  Print.printer_Foxit_Reader_PDF_Printer.print_colorspace:
  Print.printer_Foxit_Reader_PDF_Printer.print_command:
  Print.printer_Foxit_Reader_PDF_Printer.print_downloadfonts: false
  Print.printer_Foxit_Reader_PDF_Printer.print_duplex: 1515870810
  Print.printer_Foxit_Reader_PDF_Printer.print_edge_bottom: 0
  Print.printer_Foxit_Reader_PDF_Printer.print_edge_left: 0
  Print.printer_Foxit_Reader_PDF_Printer.print_edge_right: 0
  Print.printer_Foxit_Reader_PDF_Printer.print_edge_top: 0
  Print.printer_Foxit_Reader_PDF_Printer.print_evenpages: true
  Print.printer_Foxit_Reader_PDF_Printer.print_footercenter:
  Print.printer_Foxit_Reader_PDF_Printer.print_footerleft: & PT
  Print.printer_Foxit_Reader_PDF_Printer.print_footerright: & D
  Print.printer_Foxit_Reader_PDF_Printer.print_headercenter:
  Print.printer_Foxit_Reader_PDF_Printer.print_headerleft: & T
  Print.printer_Foxit_Reader_PDF_Printer.print_headerright: & U
  Print.printer_Foxit_Reader_PDF_Printer.print_in_color: true
  Print.printer_Foxit_Reader_PDF_Printer.print_margin_bottom: 0.5
  Print.printer_Foxit_Reader_PDF_Printer.print_margin_left: 0.5
  Print.printer_Foxit_Reader_PDF_Printer.print_margin_right: 0.5
  Print.printer_Foxit_Reader_PDF_Printer.print_margin_top: 0.5
  Print.printer_Foxit_Reader_PDF_Printer.print_oddpages: true
  Print.printer_Foxit_Reader_PDF_Printer.print_orientation: 0
  Print.printer_Foxit_Reader_PDF_Printer.print_page_delay: 50
  Print.printer_Foxit_Reader_PDF_Printer.print_paper_data: 9
  Print.printer_Foxit_Reader_PDF_Printer.print_paper_height: 11 h 00
  Print.printer_Foxit_Reader_PDF_Printer.print_paper_name:
  Print.printer_Foxit_Reader_PDF_Printer.print_paper_size_type: 0
  Print.printer_Foxit_Reader_PDF_Printer.print_paper_size_unit: 1
  Print.printer_Foxit_Reader_PDF_Printer.print_paper_width: 8.50
  Print.printer_Foxit_Reader_PDF_Printer.print_plex_name:
  Print.printer_Foxit_Reader_PDF_Printer.print_resolution: 1515870810
  Print.printer_Foxit_Reader_PDF_Printer.print_resolution_name:
  Print.printer_Foxit_Reader_PDF_Printer.print_reversed: false
  Print.printer_Foxit_Reader_PDF_Printer.print_scaling: 1.00
  Print.printer_Foxit_Reader_PDF_Printer.print_shrink_to_fit: false
  Print.printer_Foxit_Reader_PDF_Printer.print_to_file: false
  Print.printer_Foxit_Reader_PDF_Printer.print_unwriteable_margin_bottom: 0
  Print.printer_Foxit_Reader_PDF_Printer.print_unwriteable_margin_left: 0
  Print.printer_Foxit_Reader_PDF_Printer.print_unwriteable_margin_right: 0
  Print.printer_Foxit_Reader_PDF_Printer.print_unwriteable_margin_top: 0
  privacy.sanitize.migrateFx3Prefs: true
  Storage.vacuum.Last.index: 1
  Storage.vacuum.Last.places.sqlite: 1411212643

  JavaScript

  Incremental GC: true

  Accessibility

  Enabled: false
  Prevent accessibility: 0

  Versions of the library

  NSPR
  The expected minimum version: 4.10.6
  Version: 4.10.6

  NSS
  The expected minimum version: 3.16.5 based ECC
  Version: 3.16.5 based ECC

  NSSSMIME
  The expected minimum version: 3.16.5 based ECC
  Version: 3.16.5 based ECC

  NSSSSL
  The expected minimum version: 3.16.5 based ECC
  Version: 3.16.5 based ECC

  NSSUTIL
  The expected minimum version: 3.16.5
  Version: 3.16.5

  Experimental features

  You always use the same profile folder you used with the Nightly build (35.0a1)?

  If you do, then you must create a new profile.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting more problems.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  With the decommissioning of a Nightly build might be unstable, you should be still more restrictive with what to retrieve.

• Query to find the match on two areas where the third does not work...

  Faced with this one...
  
  Light of the example data
  

  SECTION     GROUPID     SUBGROUPID     COMPONENT     PNUM     USERNAME
  HVAC     AC     MOTOR          HOSE          111.1     BOB
  HVAC     AC     MOTOR          HOSE          111.2     BOB
  HVAC     AC     MOTOR          HOSE          111.3     JIM
  
  HVAC     AC     MOTOR          BOLT          411     BOB
  HVAC     AC     MOTOR          BOLT          411     BOB
  HVAC     AC     MOTOR          BOLT          411     BOB
  HVAC     AC     MOTOR          BOLT          (null)     (null)
  
  HVAC     AC     MOTOR          CLAMP          211.1     BOB
  HVAC     AC     MOTOR          CLAMP          211.2     JIM
  HVAC     AC     MOTOR          CLAMP          211.3     BOB
  
  HVAC     AC     MOTOR          STRAP          611.1     JIM
  
  HVAC     AC     MOTOR          BELT          811.3     BOB
  HVAC     AC     MOTOR          BELT          (null)     (null)
  
  HVAC     AC     MOTOR          DISC          (null)     (null)
  HVAC     AC     MOTOR          DISC          (null)     (null)
  HVAC     AC     MOTOR          DISC          (null)     (null)
       

  What I need is a list of records where the GroupID and component matching, and where they had a PNUM who were not all the same
  
  So in this case I would like to only these returned, Section/SubgroupID/username are not required to match on anything whatsoever, but here to view the
  additional data that may be there. Items that have PNUM which IS NULL should be ignored? Example would be the example above where the PNUM
  for a record was 811,3 while one below is null, which should not return. Its considered to be 'ok' and does not need to be reported.
  
  

  SECTION     GROUPID     SUBGROUPID     COMPONENT     PNUM     USERNAME
  HVAC     AC     MOTOR          HOSE          111.1     BOB
  HVAC     AC     MOTOR          HOSE          111.2     BOB
  HVAC     AC     MOTOR          HOSE          111.3     JIM
  
  HVAC     AC     MOTOR          CLAMP          211.1     BOB
  HVAC     AC     MOTOR          CLAMP          211.2     JIM
  HVAC     AC     MOTOR          CLAMP          211.3     BOB

  Hello

  To identify all incompatible groupid/component combinations:

  SELECT       groupid, component
  FROM       table_x
  GROUP BY  groupid, component
  HAVING       COUNT (DISTINCT pnum)     > 1
  ;
  

  To view information on all lines with these groupid/component combinations, use the query above in an IN subquery:

  SELECT  *
  FROM     table_x
  WHERE     (groupid, component)  IN
       (
            SELECT       groupid, component
            FROM       table_x
            GROUP BY  groupid, component
            HAVING       COUNT (DISTINCT pnum)     > 1
          )
  ;
  

  I hope that answers your question.
  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) and also publish outcomes from these data.
  Explain, using specific examples, how you get these results from these data.
  Always say what version of Oracle you are using (for example, 11.2.0.2.0).
  See the FAQ forum {message identifier: = 9360002}

• Code 19. My CD/DVD readers does not

  Code 19. My CD/DVD readers used to work properly. After that some windows updates, my CD/DVD drive is not listed or recognized. I tried the Auto Fix It utility, but always by car is not recognized. Help, please.

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Code sample NFC in the development guide does not

  Hello.

  I just wrote a quick Hello world app for reading and writing NDEF records, based on the code provided in the development Guide.

  I use the MiFare Ultralight tags. However, it does not work.

  I could write NDEF only once during the tests, but after that I was unable to write the tags again or delete them using my application. However, the application of NFC demo included with the BB is able to write.

  Thinking that the tag doesn't have enough space to store the nested NDEF message of the dev guide, I changed the code (reader and writer) use only a title and url records, without success.

  I also tried to change the parameter listener of NDEFRecord.TNF_WELL_KNOW to NDEFRecord.TNF_ANY, so read the labels already written with the demo included in the BB application, but it has no effect. I have read that sporadically with the two types, but most of the time the BB does not detect everything just the tag.

  Now, I know that:

  • The tag is readable and writable, because I read and written in the plain format ISO-14443-3 and the BB demo readings and Scripture in NDEF.
  • The tag is unlocked and able NDEF (inspected a target using DetectionListener object)
  • A few times I was able to write an NDEF tag, but then it is not readable by my application nor by BB demo group.
  • I have read several times, but most of the time it fails.
  • Tried to erase the label before writing, but does not work.

  I use exactly the same code that appears in the development guide and a BB 9360.

  Finally, I solved the problem. It turns out that my tags (Mifare Ultralight) have only 64 bytes of total storage, so the example NDEFMessage in the development Guide (root NDEF Sp record with two folders nested inside) is too big to be stored when the text exceeds a few words.

  With regard to the NDEFTagConnection class, I found that the erase method throws exceptions, and that the append method is problematic. The only method that worked for me was the write method (who wrote the entire tag).

• 7510 Photosmart HP e-All-in-one: Photosmart 7510 does not, tech help links not working no more.

  My 7510 Photosmart was working fine just a couple of days, but suddenly, I have a problem: he will pretend to be printed, but there are only a few weak gray lines (which do not match with the document being printed).  I tried the links online to HP technical support, but they all fail, with messages such as:

  Internal Server Error - read

  The server has encountered an internal error or misconfiguration and was unable to respond to your request.

  Reference #3.9733fea5.1428886261.1ce573bc

  The ink cartridges are all quite complete, except for the small black - the big one is full.  I got no error message.  I have reset to factory settings, without success.  I was printing a PDF file.  I don't think that the problem is with the computer, because I tried to print with another computer, with the same result.  The computer is a PC, in Windows 8.

  Help!  I need to print an extension with the IRS!

  Hello

  Please try the steps below...

  1 > while the printer is turned on, open the cartridge door. Check if the ramasseherbe moves automatically.

  2 > wait until the printer goes into silence.

  3 > try to manually move the carriage.

  4 > if the carriage does not move, it could be a ramasseherbe jam. You may need to check if there is a paper jam in the field of transport.

  5 > remove print head, close the printer cover. Unlug if power cord back of the printer.

  6 > wait 30 seconds, and then reconnect the power cord to the back of the printer.

  7 > install the print head and cartridges when prompted.

  If you the problem persists, please call HP Tech Support for assistance because he clould be a problem with the print head.

  If you are in the United States, the toll free # is 1-800-474-6836.

  If you're not in the United States, and then connect to www.hp.com , bottom left it is an icon of the world map, click it and then select the region that you belong to, which would then provide the support options for you for this region.

• Red Apple icon shown when loading the software containing the two Vista and Apple software - does not recognize Windows

  I recently bought 2 bits of software that contain the Apple and Microsoft (Vista) versions on one CD.  When I insert the CD into my Vista PC, it can not find or load the installation files.  Instead, if I look at what is on the drive, I see an icon of the Red Apple.  If I put the same CD on Vista PC to my wife, it loads correctly.  If I load the version of WIndows 7 software, it loads correctly and run the program until he acknowledges that the operating system is Vista not Windows 7.  Something triggered something on my Vista PC to do brand new loading on my CD player program needs to ignore files in vista and show files apple as if they were independent.  Is there a toggle for this problem?  If I run the software of Microsoft ' Fix It' - the solution that I see on most boards, it does not.  As far as I know, other Vista users are facing this problem without solution by MIcrosoft or any other tech tips.

  The problem is with a program from Mediafour.  It's called xplay 3.  If you uninstall this program, everything works fine.