SanDisk sansa e280r

Similar Questions

• How to move files to support 8 GB SanDisk Sansa Fuze player to the computer?

  How can I move audio files of SanDisk Sansa Fuze 8 GB Media Player from my computer using Windows Media Player 10?  I did it in the past with the previous versioins of Media player, but this version does not offer this option.

  Have you checked the web site of Sandisk?  http://KB.SanDisk.com/app/answers/detail/A_ID/389

• When I connect my SanDisk Sansa Clip MP3 player Zip I get Code 10 device cannot start

  Original title: Code 10

  When I try to plug in my SanDisk Sansa Clip Zip MP3 player I get the device Code 10 cannot start.  I have XP.  The MP3 came with a 2.0 USB.  I don't know what the USB on my computer.

  Hello

  First of all, thanks a lot for taking the time to help me.

  After having tried everything you have suggested and have no chance and then by searching the Microsoft sites, Dell and SanDisk, I finally found a very simple solution that worked.

  Thought I would pass it for any future reference.

  The SanDisk site said to try this:

  Activation or forcing MSC mode on the Sansa player

  How to connect my Sansa in Mode "MSC" player or forcing MSC mode on my Sansa player?
   

  The steps below will force your readers Sansa Connect mode MSC on your PC.

  Sansa Clip Zip
  1. turn off the device.
  2 hold down the central button while connecting the device to the computer.

  Thanks again.

• No sound on computer, using SanDisk Sansa Fuze 8 GB Media Player Silver

  MyComputer has no sounds

  original post: SanDisk Sansa Fuze 8 GB Media Player Silver

  Hello

  • You receive an error message?
  • What were the changes made before the show?
  • What player you use to play?

  You can check this link:

  How to troubleshoot sound problems in Windows XP

  http://support.Microsoft.com/kb/307918/en-GB

• Cannot format or reset Sandisk Sansa Sport

  I tried to erase this player under linux

  and then Linux says:

  org.freedesktop.UDisks.Error.Failed: error creating partition: helper came out with exit code 1: in part_add_partition: System = / dev/sdb, start = 0, size = 4081057792, type = 0x0c
  Entry parser for MS-DOS (offset = 0, size = 4081057792)
  MSDOS_MAGIC found
  looking at the part 0 (offset 0, size 0, type 0x00)
  new entry of part
  Watch part 1 (offset 0, size 0, type 0x00)
  new entry of part
  Watch part 2 (offset 0, size 0, type 0x00)
  new entry of part
  looking at part 3 (offset 0, size 0, type 0x00)
  new entry of part
  Analyzer of MS-DOS that exists
  Detected MSDOS partition table
  schema of table containing partition = 0
  I have it
  got the drive
  Error: Can't have a partition outside the disk!
  ped_partition_new() failed

  Then after that the player says: file system error.

  drive format or reset.

  Windows will not fit. It detects sandisk as a hard drive, but

  won't fit. So it is now frozen.

  This same phenomenon occurs with sandisk sansa Jam.

  Then I also had the Sandisk sansa clip and it worked

  always well with Linux (xubuntu).

  It is likely? Thank you

  How to get a useless Sansa Clip works again

  user XSCD, 16/10/2008

  http://forums.SanDisk.com/T5/Sansa-clip-Sansa-clip/need-tech-help-restore-partition-s-filesystems-et... ghlight/true #M8170

  1. Reformat Sansa Clip flash memory and install a FAT32 file system. You can reformat in Linux using Gparted, but the Clip still won't work because the Clip wants the exact settings that Windows uses when it formats a blank disc. However, reformat the Clip in Gparted will serve to ensure that it will not work absolutely nor be recognized by a Windows machine. So go ahead and this once if you wish. Then connect the Sansa Clip USB2 to a computer running Windows or Vista. Then use Windows File Manager (Windows Explorer) to try to open the drive letter of the USB Windows detected device. Windows will give you an error message saying: the drive is not formatted and offer to format it for you. Choose the FAT32 file system and uncheck "quick format". Then let Windows format the Sansa Clip flash memory.
  2. Once the Clip is in the Windows format, delete ('remove hardware safely' icon in the system tray, then unplugging the USB cable). Then go to SanDisk.com and download the "Sansa Updater." This application is update the firmware for the Sansa Clips that are already working, but believe it or not, it can also completely restore the firmware and de-structure of directories and files including the Clip needs to run. After downloading and running or installing the update for Sansa, close the program. Then reconnect the Clip on Windows. It must be recognized and the Sansa Updater program may start automatically. If not, then find the Sansa Updater in the start menu, run it and follow its instructions. It will get your Sansa Clip, then download the latest firmware, then restore your Sansa Clip used-to-be-there's no need to Virgin State, approved, completely updated

  Here is a link to the software update Clip Sport: FW 1.29

  http://forums.SanDisk.com/T5/SanDisk-clip-sport/SanDisk-clip-sport-firmware-1-29-released/TD-p/35208...

• Can the Sandisk Sansa Fuze 4 GB MP3 read podcasts one after the other

  For health reasons, I need to take a long walk after each meal.  For many years during my walks that I listened to podcasts on my wonderful old Sandisk sansa, who plays a podcast after the other without action from me until I have stop.  It's perfect here in the North when I walk in 30 below zero weather. I mean that I don't want to open my parka and out the player to move to the next podcast.  If I had to do, they would find me lying in the snow, Frost, like all the rest of those poor Devils who bought the wrong MP3 player.  Anyway, after years of using the plug-in on my old Sansa fuze is pretty much exhausted and the player must be replaced.  I buy a sansa clip, but had to return when I discovered that he has not played podcasts one after the other, automatically. (And it's also too small for my needs).  Before you buy a new 4 GB sansa fuse, so I need to know if this greatest player will play my podcasts consecutively and one after the other.  Your advice would be much appreciated.

  MrHat wrote:

  I currently use the Sansa e250 2 GB MP3 Fuze player Walkman.

  There is an e250 (2 GB) and a rocket. They are 2 totally different players. The "rocket" (original) replaced the e200 series model.

  But if your podcasts are placed in the Podcast folder (or even record Audio books) and then ranked in the same "Album" folder, they must play consecutively without stopping, regardless of the model of reader.

• SanDisk sansa m230 Initialize fail

  Hi, I have a Sandisk sansa M230 and updating of software found new firmware for my device. As soon as I installed the update of the firmware, the software told me to remove the usb connection and restart the device. Now it tells me failed to initialize of the screen and not detected by windows. Any help to solve this problem. I don't know why this update of the software ruined my mp3 player which was working fine until yesterday.

  Update on this subject. I managed to connect in usb mode and was able to solve the problem. A little hactic to reprogram but good.

• Will be for Sandisk Sansa E250 travel charger / E260 / E270 / E280 also charges the "rocket" SanDisk?

  Will be for Sandisk Sansa E250 travel charger / E260 / E270 / E280 also charges the "rocket" SanDisk?

  Thank you

  Yes.

• SanDisk Sansa 1 GB

  How to transfer music from the sandisk sansa 1 GB to the computer?

  How to transfer music from the sandisk sansa 1 GB to the computer?

  =========================
  The following steps may be worth a try:

  Insert your memory card into your Media Player...

  Close all windows that can be opened...

  Reach... Start button / computer...

  What is the memory card show as a drive letter? (if your Media Player)
  has several slots, there will be several removable disks listed... the
  SD card will be one of them)

  If_Yes_right click on the drive letter correct and in the menu... Choose...
  Explore... now you should see the directory of the memory card.

  From there you should be able to drag and drop or copy and paste the
  files in a folder on your hard drive.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Cannot download SanDisk Sansa Clip 4 GB Media Player

  Original title:

  SanDisk Sansa Clip 4 GB Media Player

  not able to download help

  Hello

  Thanks to community Microsoft can help you with you about Windows!

  You are not able to download SanDisk Sansa Clip 4 GB Media Player.

  What exactly happens when you try to download?

  You can contact SanDisk for assistance:

  http://www.SanDisk.com/products/music-video-players/clip-plus/

  I hope that helps!

  If you need help on Windows, please keep us informed.

  We will be happy to help you!

• SANDISK Sansa Clip Zip not recognized by WIN 8

  My SANDISK Sansa Clip Zip MP3 player is not recognized by my WIN 8 machine when I connect it via USB.  It works fine on my other machine WIN 8.  Technical support SANDISK told me that the MTP drivers are missing or corrupted.  How do I find, download and install these drivers from the Microsoft site?  Is it also possible to copy these out of the installation of WIN 8 disk I have?

  OK, so I found that this worked for me on win. 8

  1st: hit 'Windows key' 'X', then click on Device Manager.

  2nd: once it go to Universal Serial Bus Controllers, find "USB Mass Storage Device".

  3rd: hit search and edit the material (something like that)

  4th: there are 2 categories, the first to find the driver automatically, and the second looking for your pc.

  5th: click on the first then wait it should work and then it will say that it is recognized and you can sync your Media Player!

  I hope this has helped! :)

• SanDisk Sansa Clip silver 4 GB Media Player

  I lost the voice function on my computer and I need to install that

  Hello

  1. what exactly is the problem?

  2. you do not receive sound sansa or your computer?

  If you get no sound from the player, then I suggest you to update the drivers from this link and check if that helps:

  http://www.SanDisk.com/SanDisk-support/driver-download-wizard

  It will be useful.

• SanDisk sansa e280 V1 keeps looping (stucks) on the spalsh screen

  Hello

  I had a serious problem with my Sandisk e280... The other day I was listening to just when all of a sudden my mp3 restarted without any warning... now it's keeps looping on the home screen (black screen and "Sandisk" in white letters). Normally after the splash screen, you will see the main screen (menu), but my screen goes white then leaves (splash screen).

  Someone at - it suggestions?

  Thankss!

  Try:

  1 - holding the power button for 20 seconds to "reset". (and then turn it on)

  2 - take the battery for 30-60 seconds, then put the file in

  3 - switch to recovery mode, create a folder called "Sansa.fmt" and drop it onto the Sansa. It reformats itself when you turn it off. (DO NOT NEVER FORMAT the disc "16 MB format"!)

  4-if those who do not work, sometimes the 'Chip RAM' wiggles loose. Please dissamble it, push it in firmly and try again. Photos and instructions are HERE.

• SanDisk Sansa e260 4GB Media Player

  How can I reverse sync files voice of my Sansa e260 in my computer, i.e. upload voice files from the Mp3 player to the computer?

  Thank you

  Mel

  HI Mel,

  If you want to sync (upload) the mp3 files from your sansa sandisk to windows media player / (computer)... Follow this link...

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-device-to-sync-in-Windows-Media-Player

  and if you have a vice versa... Here is the link...

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/sync

  hope this works for you :)

• SanDisk Sansa Clip + 4 GB MP3 player with FM Radio

  Hello-

  My new sansa clip + out of the box and I'm not able to do Radio FM works.  Battery is charged.  All I get on screen is a set of headphones and the 'music '.  I do not expect to play music because I have not yet loaded, but I expect to be able to get FM radio but can't seem to get there.  Any suggestions on how I have to happen?  Thank you.

  Please note that I do not see a menu of items to select from the MP3 player.  I do not see a "lock" or "unlock".

  My computer recognizes the drive as a new piece of hardware.

  The reader does not recognize the software on the CD when I put the CD in the computer.

  The player does not allow me to make the software what I t hink is the "root directory" for the player.  I guess tha the directory "root" is the "Sansa Clip + 4 GB" or the "internal memory".  It allows me to copy in one of these.   Appears as:

  + The Sansa Clip + 4 GB

  -Internal memory

  + Albums

  + Audio books

  + Music

  + Playlists

  + Podcasts

  + Records

  + Service

  My D drive that reads the CD has these files it contains:

  Autorun.inf and sansa - install .exe and one other file that reads:

  fscommand with these files it contains: dloadrhap.exe, dloadrhap.txt, proxy.bat, proxy.exe

  If I do not have need of these, please let me know.  I don't want to stuff more then I need to run the player.

  I'm assuming that I need only the files autorun.inf and the sansa - install .exe.

  I do not understand what is Rhapsody or why I need.

  Thank you.

  Bonnie

  Now, don't laugh at this suggestion, but: when you get the player, there is a transparent plastic sticker that was placed on the screen of the player, which has a screen simulation showing the items that describe you see on your screen - have - you, you take off the sticker? (It generally is a small tab on the right side of the tile to help with that.) Once you do this, the player I hope will begin to operate as expected. On the CD, you don't need at all! The CD is required to use the separate music Rhapsody and optional subscription service (for which you pay every month, after a free trial, usually). If you do not want the service, go to the CD. Finally, you should check and see if your drive is the latest firmware - look under settings to the player and to compare this version number firmware recent listed in the upgrade thread Firmnware sticky at the top of this forum. If the thread here has a more recent version of firrmware, recommended that you upgrade to it-, it is very easy to do. I hope this helps!