Sansa Clip bottom screen SanDisk MP3 Zip

Similar Questions

• Sansa Clip: Loading screen saver: can manually enable us to extend the life of the screen?

  What charge the Sansa Clip: after an hour, the screen turns white (a screen saver, I guess).

  I would like to activate the screen saver immediately, to extend the duration of the display.  Is it possible to do?

  Or maybe in a version of firmware future, so a sequence button turn it on.

  Unless the life of the screen is much longer than the lifetime of the unit in general...

  Thanks for your time.

  As far as I know, you can't do it manually now.

  This is the reason why some people with an adapter for recharging: when charging via AC, the display shuts off after setting the time of the backlight of your display.

  Indeed, even if it bugs some of us, it is likely that display time of 1 hour during USB charging will not significantly affect the ultimate lifecycle of the screen, in the end; If I remember correctly, the screen has a life expectancy of 5000 hours or something like that (sorry, it's been a while) - it is 208 days of fulltime show all day/night long.  By the time you reach this point, probably, if ever, the battery life may have been reached, or you probably may have gone to another player, as technology improves over time.  But it's all unique to each user (if you are more rare than the user who guard 8 hours per day, life of the screen display will be reached about 1.7 years; if you use your player lot every day and are charging every day, charging via AC could save you 365 hours of projection of the time per year (, the equivalent of almost a month of 1.7 years screen time), and so you can recharge via AC just to cover as much as possible.  (More realistic, if your screen is on for 2 hours a day, which is still a lot, unless you really keep your screen on a lot, the screen should last for about 7 years or more - think where you will be and what technology you are using maybe at this time.)

• Sansa clip froze screen message says "disconnected".

  My machine went on mode standby mode when it is connected with the Sansa clip. I grew up my machine and unplugged the USB Sansa, since then clip shows a message "disconnected." Even if I'm trying out or other options it still shows offline message. I tried the firmware update, but it says that no product can be updated sansa is recognized.

  I hate it when this happens.  The Sansa off, slide the switch to the position IT and hold it there for 10-15 seconds.  This will be a soft reset of the device.

  It should now light up normally and will be recognized by the computer again.

  You can prevent this catastrophe wee by configuring the USB to stay in standby mode. With the trendy Sansa, in Device Manager, go to Bus USB controllers, and expand that.  You will see a list of ads from hub USB root at the bottom of the tree.

  Starting at the bottom, click twice on each one and select Properties.  The Sansa is hidden in this point of view, but it is be clicking on the current tab.  When you have found the position of hub with the Sansa listed, click the power management tab, and uncheck "allow the computer to turn off this device to save power".

  Please note that the Sansa Updater will modernize only the firmware currently installed the latest version, but it is not designed to reinstall the same version, as in the case of a repair.  To reinstall the same version, you must follow the instructions to install the firmware manually.

  In this particular case, I don't think it will damage your firmware.  The soft reset should do the trick.

  Bob

• Sansa clip cracked screen and need help turning repeat stop

  My screen is cracked and I can not afford a new mp3. Unfortunately, it's the repeat mode 1 song when he cracked.  I just need a procedure step by step to how to repeat offshore.  I don't see any of my screen. I would also like to know how I could put it on playall instead of just a song mode.  I tried to reset it but it doesn't work. I'll be away from my own computer for a few months, so I would rather not format because I lose my original songs that I have on this subject.  I also have an audio book on it then a procedure step by step on access which will be useful also.

  Hmmm I don't know how useful it will be: do you see anything on the screen?

  My version of firmware on the clip is: 01.01.30a

  Starting point:   When I turn on my video it automatically starts playing my last song and obeys the shuffle / repeat options.

  By pressing the menu key small I will be positioned on the music

  Music (headphone icon) ... If I click the bottom , I get the following menus:

  FM radio

  Voice

  Parameters

  Music (back to music again)

  If I click Select on the music , I get the following features:

  Play all

  artists

  Albums

  Songs

  Kind

  My best rated

  Playlists

  Podcasts

  Audio books

  records

  Music options

  Play at all (and back to play at all)

  If I'm playing together and the song: each arrow pointing down will give you the following:

  Back to the list of music

  Add song to Golist

  Rate song

  Shuffle (stop / market)

  Repeat (All, Off, song) *.

  Music EQ

  Clear Golist

  Delete the song

  Back to the list of music (then return to the list of music once again)

  If in this menu, I click on the right arrow on repeat * for every time I press the right arrow key, I turn the 3 following options

  All the

  Off

  Song

  Allows you to start with the Clip off: so: If your clip is on... turn it off...

  If your clip is now disabled, start by putting on:

  then click on the small menu button

  then click Select

  then click Select again to play all the music

  Wait a few seconds and the songs should begin to play.   or if its on UN-pause pause, there click on place

  To change the repeat function: while playing a song...

  Click Select

  click the bottom 5 times

  then to change click on repeat right options will be all out, song and start over with all, off, again song.    This will start with whatever the currently set option.

  So if his game to repeat the song. click on the right change to repeat all, right click to change to repeat Off

  Click Select = the middle button on wheel

  Hope this helps, reply back if it did.   and I'll look audio books, the next time or someone else could

• When I connect my SanDisk Sansa Clip MP3 player Zip I get Code 10 device cannot start

  Original title: Code 10

  When I try to plug in my SanDisk Sansa Clip Zip MP3 player I get the device Code 10 cannot start.  I have XP.  The MP3 came with a 2.0 USB.  I don't know what the USB on my computer.

  Hello

  First of all, thanks a lot for taking the time to help me.

  After having tried everything you have suggested and have no chance and then by searching the Microsoft sites, Dell and SanDisk, I finally found a very simple solution that worked.

  Thought I would pass it for any future reference.

  The SanDisk site said to try this:

  Activation or forcing MSC mode on the Sansa player

  How to connect my Sansa in Mode "MSC" player or forcing MSC mode on my Sansa player?
   

  The steps below will force your readers Sansa Connect mode MSC on your PC.

  Sansa Clip Zip
  1. turn off the device.
  2 hold down the central button while connecting the device to the computer.

  Thanks again.

• Sansa Clip Zip battery does not charge, goes directly to the screen of the song

  It's my third Sansa MP3 players.  The first was a Sansa Fuze with the round button.  Like that one but my husband needed more that I did it I gave it to him.  He is old, but the player is still so today.

  The second was a Sansa Fuze + with the touchpad.  The touchpad has been way too sensitive but I need to play only two songs for sleep therapy while I was fine with it until the battery suddenly stopped charging a few months ago, I posted my problems in the Sansa Fuze + forum.  After trying a few suggestions, I finally accepted that he was a Goner.

  I bought this Sansa Clip Zip 4 G, thinking that should last at least for a while because I use every day.  In fact, I needed only when I had disorders of sleep during the night;  I probably used it once every two weeks or more.  I used my cell phone to the device, had no problems until now.

  The last time that I loaded it was 2 weeks, to 98% full - the thing never indicated 100% while it was a little weird.  In any case, I had problems sleeping two nights ago so I took out the Clip Zip and noticed that the battery still had plenty of juice left.  This morning I checked the battery, he had 68%, but I thought I needed could again tonight so better it load up, just in case where.

  I connected it to my computer, but it did not show "connected" screen  Instead, he went straight to the last song I listened to.  I thought it was weird so I turned off the player then tried again.  Of course, he went directly to the screen of the song.  I noticed that the battery icon was showing 'filler '.  I thought that if I left it connected to the pc long enough IT would eventually deducted.  Two hours later, I checked the computer and it says that the drive battery was dangerously low.  I disconnected and then reconnected and this time he said 98% charged.  I loaded a bit more just in case so I used the player for about 15 minutes and the player turns off.  Plugged into the pc and now it says battery is extremely low, while the last hours do not charge the battery, but it drains pretty!

  My last attempt was to plug into a wall charger and guess what?  He went directly to the screen of the song once again.  Contrary to connect to the computer, I could actually turn off the player but this way does not charge the battery, or.   It's exactly the same problem as my second player, the Sansa Fuze +.

  I bought the last two players from Sansa, simply because I really liked the first which of course had been abandoned a long time ago.  I don't know if I have bad luck or it is just an issue joint Sansa players but one way or the other I don't buy any Sansa more in the future.  He is a big name that comes with the big disappointment!

  You can also try a reset by pressing and hold the power button for 20-30 seconds. Release it and then turn it on normally and see how it behaves.

  By your description of the message "dangerously low" you get then plug it into your computer, which tells me that you use MTP mode on the player (or default automatic default, MTP). MTP mode can be pretty weird; better to use MSC mode unless you have need to PSG for "protected" content or DRM files such as Rhapsody or audio in your library or Audible books. The small "crirically" message is a bug in Windows 7 (using MTP mode) that Microsoft did not consider important enough to fix.

• SANDISK Sansa Clip Zip not recognized by WIN 8

  My SANDISK Sansa Clip Zip MP3 player is not recognized by my WIN 8 machine when I connect it via USB.  It works fine on my other machine WIN 8.  Technical support SANDISK told me that the MTP drivers are missing or corrupted.  How do I find, download and install these drivers from the Microsoft site?  Is it also possible to copy these out of the installation of WIN 8 disk I have?

  OK, so I found that this worked for me on win. 8

  1st: hit 'Windows key' 'X', then click on Device Manager.

  2nd: once it go to Universal Serial Bus Controllers, find "USB Mass Storage Device".

  3rd: hit search and edit the material (something like that)

  4th: there are 2 categories, the first to find the driver automatically, and the second looking for your pc.

  5th: click on the first then wait it should work and then it will say that it is recognized and you can sync your Media Player!

  I hope this has helped! :)

• SanDisk Sansa Clip + 4 GB MP3 player with FM Radio

  Hello-

  My new sansa clip + out of the box and I'm not able to do Radio FM works.  Battery is charged.  All I get on screen is a set of headphones and the 'music '.  I do not expect to play music because I have not yet loaded, but I expect to be able to get FM radio but can't seem to get there.  Any suggestions on how I have to happen?  Thank you.

  Please note that I do not see a menu of items to select from the MP3 player.  I do not see a "lock" or "unlock".

  My computer recognizes the drive as a new piece of hardware.

  The reader does not recognize the software on the CD when I put the CD in the computer.

  The player does not allow me to make the software what I t hink is the "root directory" for the player.  I guess tha the directory "root" is the "Sansa Clip + 4 GB" or the "internal memory".  It allows me to copy in one of these.   Appears as:

  + The Sansa Clip + 4 GB

  -Internal memory

  + Albums

  + Audio books

  + Music

  + Playlists

  + Podcasts

  + Records

  + Service

  My D drive that reads the CD has these files it contains:

  Autorun.inf and sansa - install .exe and one other file that reads:

  fscommand with these files it contains: dloadrhap.exe, dloadrhap.txt, proxy.bat, proxy.exe

  If I do not have need of these, please let me know.  I don't want to stuff more then I need to run the player.

  I'm assuming that I need only the files autorun.inf and the sansa - install .exe.

  I do not understand what is Rhapsody or why I need.

  Thank you.

  Bonnie

  Now, don't laugh at this suggestion, but: when you get the player, there is a transparent plastic sticker that was placed on the screen of the player, which has a screen simulation showing the items that describe you see on your screen - have - you, you take off the sticker? (It generally is a small tab on the right side of the tile to help with that.) Once you do this, the player I hope will begin to operate as expected. On the CD, you don't need at all! The CD is required to use the separate music Rhapsody and optional subscription service (for which you pay every month, after a free trial, usually). If you do not want the service, go to the CD. Finally, you should check and see if your drive is the latest firmware - look under settings to the player and to compare this version number firmware recent listed in the upgrade thread Firmnware sticky at the top of this forum. If the thread here has a more recent version of firrmware, recommended that you upgrade to it-, it is very easy to do. I hope this helps!

• SanDisk sansa clip mp3 player +.

  I just bought a sansa clip mp3 player + and it seems that the language is Arabic, or something like that.

  one can tell me how to change to English because I can't read the screen says

  Thank you

  1. Select settings (image of an equalizer).

  2. Select the last item in the list.

  3. 4th option should be the language if I'm not mistaken

• How can I me floor device works with my sansa clip zip 4 GB mp3 player?

  Device stage seems to be a nice software to sync music from computer to my new mp3 player, but it doesn't seem to be in my new Windows 7 software? What should I download it?

  Or what I need to download (also) on the Sansa Clip Zip?

  Help please..!

  Thank you

  / Leif

  Read here.

  See you soon,.

  Jerry

• Play OGG tracks, freezes my Sansa Clip Zip

  Hello

  I tried that twice add files ogg to my card 32 Gb microSDHC SanDisk Ultra that I use with my Sansa Clip Zip, and the two times my player froze when he tried to play.

  I simply copy/paste ogg files, so I did not use any software to manage the upload. When I download mp3, I usually use the Winamp player.

  Ogg files are soundtrack of games shipped with my purchase on www.gog.com.

  I do something wrong when I download ogg files? Music plays without problem in VLC media player.

  Thank you.

  The Ogg decoder in the sandisk firmware is pretty buggy and really inefficient power. I talked to them years sending a few corrections (they use the standard decoder open source, just a version older and without much optimization), but who worked all the time, they stopped really about adding new things never happened. If you use multiple Ogg files, you should probably watch using Rockbox. I think the battery life is 2 or 3 times longer due to optimizations, and compatibility is much better.

• Windows 8.1 not see sport clip sandisk mp3 player

  How can I get Windows 8.1 to see the Sandisk Clip sports MP3 player?

  Hi James,

  Thanks for posting your query in Microsoft Community Forum.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. Do you have an error message when it is not detected? If YES, what is the exact and complete error message that you receive?

  I understand that the Sport Clip Sandisk MP3 player is not detected by your computer. The question may arise if the currently loaded USB driver has become unstable or damaged or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit provided below which will help you solve common problems related to hardware and devices.

  Hardware devices do not work or are not detected in Windows

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open the device by pressing the Windows key + XManager, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.
  5. Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, try the following method.

  Method 3:

  Updated with the latest firmware Clip Sport. Check out the following link to download and install the latest firmware.

  Updating the Sansa Clip Sport / Zip Clip / Clip + / Clip firmware

  Check if your computer is able to connect with the media player.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Transfer from Windows Media Player to Zip Sansa Clip

  In the end, I am creating playlists on my Sansa Clip Zip. So I think THAT I have to create a playlist in Windows Media Player and then sync my Sansa Clip Zip. For some reason any I am only able to see 5 playlists, but I know that I have created several of them. In fact, if I try to create a new play list using a name I know, I created, it is said that there are already. How can I see ALL my playlists?

  Also, if I click on playlists for the Sansa Clip Zip it shows I have 9 playlists, but I can't see what they contain!

  Hi Nymickey,

  I suggest you to contact the Sansa Clip Zip support for better support associated with Sansa Clip Zip and check if it helps.

  http://KB.SanDisk.com/app/ask/session/L2F2LzEvdGltZS8xMzM4MDA4NzQ5L3NpZC90QmxJQjJaaw%3D%3D

• Work of the trouble on Sansa Clip Zip

  Hi - I have problems with the work on my Sansa Clip Zip.  Work does not show for each song.  For songs ripped in the Zune software will show the work.  However, for the ripped songs in iTunes does not show the work.  I tried to put .jpg files in the folders with the songs, make sure they are of size less than 100 KB and even tried to resize one at 200 x 200 pixels (though the size was too large of pizels overall size was fine).  Any ideas?  Thank you.

  Use 'album art.jpg' (without the quotes and with space, not a line of underscore) or "folder.jpg" (again, without the quotes).

  I'm not 100% sure, but I think .m4a files Apple 'protected '. The Zip will not play them. They would need to be converted to a type of file supported as .aac (Apple DRM-free format) or .mp3 (universal format).

  You can use MP3Tag above (free to download) software to incorporate images of cover art in the "extended" part tag. Note that you need to do this for each (long) file rather than the image one (album art.jpg) for all files in the folder even the opposite effect.

• Sansa Clip + with Sandisk Micro SDHC

  Hi, I want to buy the Sansa Clip + and Micro SDHC 32 GB class 10 cards (specifically Sandisk MicroSDHC Card Ultra 32 GB class 10).

  Someone can confirm the compatibility of these things or give me advice on the card should I buy 32 GB class10 because I read here Sansa Clip + have problems with class 10 cards.

  just bought the hat card this week and it works very well for the me... until now.

  The player is the Zip Clip. I have not yet tried in my Clip +.