Satellite A80 - DVD burner does not

Similar Questions

• Of Satellite A200 DVD burner does not work

  The engraver of DVD of my Satellite A200-130 is not written at all. He reads everything and plays videos but it will not write anything even if the program, nero works and displays a message saying "burn successfully the process" in particular, but when you try to read the disc, Virgin sound.

  Is anyone out there who has the same prob as me?

  need help...

  Try to use it with the Windows option. For data burning, you don't need additional software.
  Can you use the format option and clear the contents of the CD/DVD-R/RW?

• Satellite C - DVD tray does not open properly

  My Satellite C DVD tray does not open properly. It opens only after several times.

  Can someone help to solve the problem?

  Thank you very much
  Dalug22

  Please check this thread:
  https://Forum.Toshiba.EU/showthread.php?82344

  The ODD (optical disc) contains a small ejection hole. You can insert an object like a paper clip to open the ODD plateau

• I installed plusv15 of real players and the dvd burner does not work. It freezes and told him to put in a disc.

  I bought plusv15 real player and it has been installed. for some reason any dvd burner does not work. A pop up comes up saying wrong disc record and replace it with a new drive. I did it three times. Real player support me staff referred to you. Windows dvd burner does not work.

  Hello

  I suggest you try to execute this fixit and see if it helps:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  I would also ask you to contact the manufacturer of your computer to check the updates of the firmware of your CD/DVD drive.

  It will be useful.

• Error message: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged" and dvd burner does not

  Original title: dvd burner does not work can not load the driver

  I get this message "windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged.

  Can someone help me?

  Hi Garry_x,

  1. were you able to use the DVD burner before with no problems?

  2. you remember to make changes to the computer recently?

  This can occur when more than one service is defined for a device, if there is a failure at the opening of the service registry entry, or if the driver name cannot be obtained from the service registry entry.

  You can check out the following link and check for the resolution:

  http://TechNet.Microsoft.com/en-us/library/cc772156 (WS.10) .aspx

  You can also read the following article and check if it helps:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Hope this information is useful.

• DVD burner does not recognize blank dvd inserted

  DVD burner does not recognize blank dvd inserted into the pc

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• CD/dvd burner does not

  CD/dvd burner does not, tried to download the driver but nothing is made, when I try to burner anything or cd playback, nothing happens except when I try to burn a drop of water comes on saying connect burner and try again. the cd itself is rotating in the machine but it is not read then I can't play any CD at all even the drive to reinstall the driver for the cd/dvd drive. can anyone help please

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Double layer DVD burning does not

  The double-layer DVD burning does not work on my XPS420 w/vista.  The drive reads everything good and burns only 4.7 GB very well.  When you try to burn to a disc double layer blank he Burns half of the project (probably a layer), and then gives me an error message.  This happened with two different software.  Once with Roxio 10.1 included with the system and once with DVD Shrink.  I use an ISO image file appropriate.  My Player recognizes a disc blank double layer with 8 GB of free space.  During the burning process is when all else fails.  I downloaded the update of the firmware as well.  My thought is that it may be a media problem.  I virgins, disc double layer 8.5 GB DVD + R DL.  It's a brand off I've not heard of, but that was all that was available at the store.  It is a toshiba player, not sure of the model number.  16xRW +-.  Note: the front of the drive said no DL.  If all goes well they installed the correct drive.

  any thoughts?

  Thank you.

  Message edited by voiron on 2008-05-15 10:45
  
  

• HP pavilion dv6 notebook (my dvd burner does not work

  I have a hp pavilion dv6 laptop. my burner does not work. I went to the Device Manager I uninstalled, shut down the computer, restart the computer, the device mgr.enable the writer went I have little yellow guest. still, the writer does not.

  I perform a driver update, the response was: the driver is already installed is to this day. My dv6 is 28 months old.

  need some advice.

  under Device Manager.  CD-ROM/DVD-rom readers

  HP cddvdwsn-208bb

  "device usb HP dvd writer 940D thank you billy'g"

  Hello

  Try please run now from the following link:
  
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Kind regards.

• Satellite A300 - DVD player does not

  Hello

  I wonder if someone can help me my dvd drive does not work.
  The little green light does not light and it does not open.

  I used the PIN on the side to open and put a disc in but still nothing.
  I also looked in device management, but he says that the driver is working fine

  Please help im totally stuck

  Dean of the thanks

  Hello

  It seems that your drive is defective and must be replaced. If he doesn t open more you can nothing do I think.
  But you can open the drive if you go into the BIOS?

  If this isn't the case, you should contact the service provider authorized in your country. They can replace the drive of your. If it of under warranty, the repair should be free for you.

  Good luck! :)

• On Satellite L500D DVD player does not work - Code 39

  my dvd driver does not work it says driver may be corrupted or missing (code 39) I got it 3 days new

  read here:

  http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

• Satellite A200 - DVD player does not open

  Hello

  I had no computer laptop withmy problems so far and my DVD/CD does not open. I'm not savvy in same computer so bear with me! There is no lights there at the moment and when I turn on the laptop it does not sound like he used to. I looked on other forums and tried things like access to the Device Manager, but it says that it is on it - any other suggestions would be welcome.

  Oh, and I get no error message and in Device Manager its says that "the device works correctly.

  See you soon

  Hello

  You can try to open the CD/DVD drive using something small and thin. Near the eject button, you should find a small hole.
  You have to slide - in the little thing and should manually open the CD/DVD drive.

  Then try to insert a CD or DVD disc and close the CD/DVD drive.
  Check if the drive can read data from the disc.

  I would recommend also check if the CD/DVD drive would eject the disc by pressing eject button check different opportunities.

  Welcome them

• Satellite A200 - lack of icon DVD and DVD burner does not.

  Hello

  I have a problem with my laptop Satellite A200 series. DVD/RW icon disappeared from my folder on the computer. I looked into the system folder and it says:-

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I've been on the Microsoft Web site and who said to delete the driver and them click on check for changes on the hardware and it should find the new driver, but it still does not work...

  Any ideas?

  Hello

  Maybe this will help.

  [ME KLICK | http://aps2.toshiba-tro.de/kb0/TSB7801XL0000R01.htm]

• HP Probook s 4540 DVD burner does not recognize blank disc

  Hello

  I have a 4540 s HP's Probook.  Windows 7.

  When I insert a CD or a blank DVD, it no longer recognizes.

  The Player keeps just ROAR and stop.

  Windows Media does not see disk space either.

  I downloaded and ran this fix attempt

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  And I get

  Problems found

  Matthewf

  Please see the document

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/troubleshootDisplay/?sp4ts.oid=5229455&spf_p.tpst=psiContentDisplay&spf_p.prp_psiContentDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c03280697-3%257CdocLocale%253Den_US&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Update Sofware reboot and try burning again

  Application CyberLink PowerDVD

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64647.exe

  Software CyberLink Power2Go

  FTP://www.Compaq.com/pub/SoftPaq/sp64501-65000/sp64740.exe

• DVD burner does not appear.

  List of burner windows dvd maker, no burners are shown. my cd - rw drive does not work properly.  Creation of dvd uses a different burner? How I'd get it in the list of burner?

  I have a dvd - rw drive.  It does not work properly.  On the creation of dvd, where it says choose a burner, burner was initially.  I deleted it by mistake in the list.  How can I get that back on the list so I can burn?  Thank you for answer

  ==================================================
  Sorry... I don't know exactly how to get the DVD Maker to recognize an optical drive.

  Might be interesting to try to go to Device Manager and uninstall the drive in
  issue and restart the system to see if it would reinstall it.

  Windows Vista-
  Open the Device Manager
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.