Satellite A-L50-1F2 - screen resolution

Similar Questions

• Satellite L500-1WP - higher screen resolution than HD?

  Nice day!

  I use Toshiba Satellite L500-1WP. I bought a new monitor Dell U2711 with max resolution 2560 x 1440. I tried to connect this monitor to my computer using a HDMI cable, the video card identifies the monitor as a HDTV and made max resolution 1920 x 1080 possible.

  Is it possible to do these 2 works as well as the resolution, I need (2560 x 1440), or I have to buy a new computer with DVI-d port?

  Hey Buddy,

  You should check the user manual here, I founded an information that the computer can display up to 2048 horizontal and 1536 vertical pixels at up to 16 million colors.

  So for me, it looks like you can use the native screen resolution of your external display t but normally 1080 p should be pretty good. :)

• Re: Satellite L40 - 14 G - screen resolution to 640x480pix after Win XP instal

  Hello

  When I installed Win Xp on laptop & installed resolution of display drivers the screen changed to 640-480 with 4-bit color and can I change it.

  I reinstalled Windows XP for 7 times, update the BIOS to 5.50, different versions of the driver installed, but have the same problem.

  I found 2 of the same subjects, but they have no answer... :((

  Please, reply & help me.
  I need to reinstall windows for my work as soon as possible.

  PS. Sorry for my bad English.

  What is Device Manager?
  Have you seen a yellow exclamation next to the graphics card?

  Graphics card is listed in the Device Manager?

• Satellite L500-1TE - wrong screen resolution - 1280 * 800 with black bar

  Toshiba L500-1TE PSLS0E-06J01LG3

  I have a problem with the video driver, because he does not recognize big screen and watch only 1280 * 800 with bar emty black on the right (same here http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=55762 but without luck hapy-end).

  tried to install a lot of drivers and I tried to use the system recovery - but nothing changes with this bar

  vary - vary the rare computer start with good resolution

  Can anyone help?

  Hello

  Are you sure that the right settings has been selected in the Intel graphics and Media Control Panel?

  In my opinion, you should check this:
  Under general settings, it is necessary to choose: + scaling-> scale full screen +.

  Here's a nice youtube video explaining this step:
  http://www.YouTube.com/watch?v=w7LYyIy8cYw

• Satellite Pro A200 - external screen resolution

  Hello

  Is the integrated graphics card Intel GMA X 3100 in my satellite pro A200 computer laptop can support resolution 1920 x 1200?
  I want to buy a monitor external 24 ". It will work in the native resolution?

  Thank you!

  Hello

  That means the Satellite Pro A200 manual says?
  Have you checked it?

  I checked it (you can download from the Toshiba page) and there is an info.
  The laptop supports these resolutions on external TV CRT:

  -800 x 600
  -1024 x 768
  -1280 x 800
  -1280 x 1024
  -1600 x 1200
  -1920 x 1440
  -2048 x 1536

  But note; some of these resolutions may be not supported if the installed graphics driver doesn t supports!

• Re: Satellite Pro L300 - screen resolution maximum?

  I just bought an external monitor for my L300. The screen resolution is 1920 x 1080, but the maximum available on my L300 is 1280 x 800. The utility Service Station tells me that all my drivers are up to date - is there a way I can increase the graphics resolution? Any suggestions much appreciated!

  Details: Running Windows 7 Pro SP1 on a satellite Pro L300 PSLB9A - 02K 002

  Hi PeterSouthon,

  Need to unlock the other screen resolutions. Simply uncheck the option Hide modes that this monitor cannot display as you can see on [THIS | http://blog.wildvista.com/wp-content/uploads/2009/12/Lightroom_hide_modes-340x400.png] photo.

  After unchecking this box, you should be able to use the native screen resolution of your external display.

• Satellite A200-1AX: Win7 has very limited screen resolution

  ?:| Can someone help me please?

  I have a SCREEN RESOLUTION (1280 x 800) after that I went to w7, before I can get about 1600 x 1280 when I was in very limited vista. I lost my vista recovery disk so I decided to go with w7, but after that I did some installations/updates to update for all my drivers again my screen resolution gives me the size 1280 x 800 maximum.
  Anyone? Please? I need your suggestions...

  -J' have a Satellite A200 1AX (recently moved from vista to w7)
  -Screen: 15.4 "
  -My graphics card is ATI Mobility Radeon HD2600.
  -I just downloaded the latest driver from ATI.

  Please tell me what I'll do.
  Thanks in advance guys...: D
  Jeje

  > Until I can get around 1600 x 1280 when I was in vista
  I can't believe that why?
  Because the screen internal 15.4 "WIDE XGA supports a maximum resolution of 1280 x 800.
  Max which is possible on the internal display, and as a result, you will not be able to choose a higher resolution on the internal display.

  The resolution of the external display may be higher but not the resolution of the screen internal.

• Satellite M100: Cannot set the resolution 1368 x 768 on external LCD screen

  Satellite M100-179
  Graphics - ATI x 1400 card.
  Cannot set the resolution 1368 x 768 on connected usung Sub - D LCD TV Samsung 32R72
  There is no resolution 1368 x 768 in the available resolution list.

  The graphics card hardware support different screen resolutions, but if the driver doesn't contain this resolution of the screen so that you cannot choose it.
  I think so you re not able to choose this special resolution on the external display.

  In my opinion it has nothing to do with the graphics card or with the screen, but only with the graphics driver.

• Satellite U200 - 1920x1080@64Hz on the external LCD screen resolution problem

  I am the owner of a SATELLITE U200 and I would use it with an external LCD display.

  The external monitor supports up to 1920x1080@64Hz.

  When I select the 1920x1080@64Hz option in the properties of the screen, I get an image enlarged and out of range of the scale. However, by selecting 1400x1050@60Hz seems to work very well.

  My question is: is there anyway I can get the 1920x1080@64Hz option working properly?

  Some info about my following system:

  Version of the OS Microsoft Windows XP Professional 5.1.2600 Service Pack 3
  Version of the BIOS Version 3.70
  Video Mobile Intel (r) Express Chipset Family worm = 6.14.10.4631 945GM (* even if intel provides versions of this driver newwer, this is the last custom by toshiba *)

  Intel(r) Graphics Media Accelerator Driver for Mobile report

  Report date: 13/03/2009
  Report time [hr:mm:ss]: 11:24:18
  Driver version: 6.14.10.4631
  Operating system: Windows XP * Professional, Service Pack 3 (5.1.2600)
  Default language: Spanish
  DirectX * Version: 9.0
  Physical memory: 1015 MB
  Minimum graphics memory: 8 MB
  Maximum graphics memory: 128 MB
  Used graphics memory: 14Mo
  Processor: x 86 family 6 model 8 Stepping 14
  Processor speed: 1828 MHZ
  Vendor ID: 8086
  Device ID: 27A 2
  Revision of the device: 03

  _Accelerator Information_
  Accelerator in use: Mobile Intel (r) Express Chipset Family 945GM
  Video BIOS: 1358
  Graph current mode: 1920 x 1080 True Color (64)

  Connected to the graphics Accelerator_ _Devices
  Active monitors: 1
  Active screens: 1

  _Monitor_
  Name of the monitor: Plug-and-Play monitor
  Display type: analog
  Gamma value: 2.20
  DDC2 Protocol: support
  Maximum Image size: Horizontal: 20.0 inches
  Portrait: 11.0 inches
  _Monitor Modes supported: _
  640 x 480 (60 Hz)
  640 x 480 (67 Hz)
  720 x 400 (70 Hz)
  800 x 600 (56 Hz)
  800 x 600 (60 Hz)
  1024 x 768 (60 Hz)
  1024 x 768 (70 Hz)
  1152 x 864 (75 Hz)
  1280 x 1024 (60 Hz)
  1280 x 1280 (60 Hz)
  1440 x 1440 (60 Hz)
  1920 x 1080 (60 Hz)
  1920 x 1080 (64)

  _Display power Management Support: _
  Standby mode: not supported
  Standby mode: not supported
  Active off the coast of the Mode: supported

  _Notebook_

  Name of the monitor: Plug-and-Play monitor
  Display type: digital
  Gamma value: 3.54
  DDC2 Protocol: support

  _Maximum image Size_
  Horizontal: Not available
  Vertical: Not available

  _Monitor Modes supported: _
  1280 x 800 (60 Hz)
  Display Power Management Support:
  Standby mode: supported
  Standby mode: supported
  Active off the coast of the Mode: not supported

  Thank you in advance!

  It s nice that your monitor supports the screen resolution 1920 x 1080, but you should check your owner's manual.

  On page B-4, you will find a list of the supported screen resolution and I must say that the resolution 1920 x 1080 is not taken in charge.
  You can select 1920 x 1440 but not 1920 x 1080.

  Sorry, but the material doesn't supports his screen resolution.

• Satellite A200 - 14 d: how many times can I change the screen resolution

  I would like to ask if often resolution change may damage the screen of my Satellite A200 - 14 d?

  Because now I'm programming in Assembly in resolution 640 x 480, and whenever I run a program, the screen should change its 1280 x 800 to 640 x 480 resolution, and it takes 1-2 seconds: it is empty, the backlight turns off, then the new resolution appears. I would like to ask if it permanently (often) could damage my LCD?

  Thank you.

  Don't worry man, it will not damage the screen ;)
  You can change the screen resolution often unhesitatingly ;)

• Satellite U200 - 10 H - how to use the screen resolution 1600 x 900?

  Hi all.

  I have a Toshiba Satellite U200 10 H. Recently, I bought the Samsung SyncMaster 2033 1600 x 900 monitor.
  The graphics card doesn't support 16/9 1600 x 900. I insall alternative graphics (intel gma 945) driver ([http://www.intel.com/support/ru/graphics/sb/cs-028366.htm]), but it did not help. Now on toshiba 1440 x 900 necessary 1600 x 900. Help, please!

  Features of the laptop; Win XP Professional
  graphics card; Intel gma 945
  monitor; Samsung 2033sw 1600 x 900

  Hello

  In the worst case the screen resolution is not supported :(

  But you can check the following:

  Go to settings of display properties (right click on desktop > properties > settings). Click Advanced, and then select the monitor tab. * Uncheck * the box Hide modes that this monitor cannot display.

  After this check again the screen to external monitor resolution.

  I hope that helps! :)

• Satellite A300-18 has: how to increase the screen resolution

  I have recently buy a Toshiba Satellite A300-18 a, and I want to increase the resolution of the screen.
  Currently the max resolution is 1280 x 800.

  Does anyone know how to increase the resolution?
  Where can I find the drivers to increase?

  Thank you

  Henrique

  Hello

  I don t think a new graphics driver would allow a higher screen resolution on your laptop A300.
  Have you checked your manual for more details?

  I downloaded the user manual of the Europe of Toshiba page and discovered that the display is a 15.4 WXGA 16Mill colors with the following resolution: 1280 horizontal and 800 pixels vertical.

  It seems that you are already using the highest available resolution and therefore you will not be able to wear to higher values.

• Satellite L650: Is it possible to get the higher screen resolution?

  L650-1CH 15.6 ", 1366 x 768.
  ATI HD5650 1 GB

  Passionate about hardware, so please don't feel expected excessive things for me.

  Is it possible to get a screen resolution higher than stock, or better with the color / contrast?

  I was always annoyed how to wash the stock on my watched Toshiba screen. Recently the screen is cracked, so I figure now is the best time to look at the options.

  Google gave me very little information so far. I checked prices on replacement of the screen, with the part about being 60 and part + service with an average of 120, but that most likely leaves me with the same or lower screen quality.

  I hope to find something more suited to the movies / games and in 1600 x 900 if possible.

  Indications as to where I should start my search?

  Hello

  > Is it possible to get a screen resolution higher than stock, or better with the color / contrast?
  Yes, this should be possible since the graphics card should support a higher resolution.

  The laptop supports display TFT 15.6 "(HD).
  You certainly have the same screen size.

  Found some spare parts to the page + + pchub.com

• Satellite M70 - screen resolution on gets of websites, bigger and bigger

  Eventhough my screen resolution is set to 1280 x 800 (I have Windows XP) when I use mozilla internet resolution (photos of letters all) is blondelot as it used to be for a reason that I do not know...

  Input and advice most welcome!

  Hello!

  I m not sure, but as far as I know this can be changed easily if you hold down the CTRL key and use the roller depending on the keyboard or external mouse.
  So, you can change the description of the websites.

  Check it!

  Good bye

• Satellite A - wrong screen resolution in games

  Hello

  I change the operating system from Windows Vista to Windows 7 64 bit home and I download the driver for Windows but when I play games, it seems 1024 * 768 pixels and my laptop has 1366 * 768 pixels.

  So anyone who has a solution to this problem please help

  Hello

  Unfortunately, I think you have to offer more details on your problem as the number of exact model laptop and all the games that you play.

  Important point is that the game must support the native screen resolution of your screen, otherwise, you are not able to use 1366 * 768 pixels. You should check this first!

  Also make sure that this new Toshiba display driver is installed and update your DirectX version.