Satellite A10-S167 failed to connect with a wi - fi connection

Similar Questions

• Need driver modem Satellite A10 - S167 PSA10U

  Need drivers for modem build in A10-S167 (PSA10U-01MJ67).
  Thank you!

  This laptop seems to be designed for the American market, and that is why you should visit the Toshiba driver page to download the compatible drivers:

  Check this site:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_modSel.jsp

  Goodbye :)

• Satellite Pro A200 failing to connect with iphone via wifi hotspot

  My apologies if I get some of the jargon wrong, but I'm pretty useless when you want IT emits.

  I have a Satellite Pro A200 and had problems connecting to various wifi connections.
  The computer could see the wifi connection and connect to it, but I wasn't able to connect to the internet.

  The question of the Office was arranged by our IT support guy (security settings on the new router we too complex for my PC or something like that), but he has not been able to solve the problem of not being able to connect to my iphone to use the 'hotspot' via the wifi function.

  Someone there knows a way to solve this, or is it a simple fact of the laptop is too old and really need to update?

  Thanks for any help that anyone is able to give.

  > Someone know a way to fix this or is it a simple fact of the laptop is too old and really need to update?

  This isn't a question of the age of the laptop
  As far as I know not that support all mobile operators
  You should first ask your mobile operator if you can use the tethering service.

  If this would be supported in my mobile operator, then connect the iphone to the laptop first
  So that you have two options: you can use the BT connection (in this case check if computer laptop also supports BT) or via a USB cable that came with the iPhone.

  (PS: as far I know to attach is supported by iOS3.0 and higher)

  After that the iphone was connected to the laptop, you must activate the tethering on iphone.
  Under settings of-> network, you should see the option internet tethering it must be enabled.
  Now you should be able to see that in the Network & Center sharing control panel.

• Satellite A300-1J1 fails to connect WIFI

  I have a Satellite A300 1J1, purchased in September which I use in college.
  At home I have Virgin Broadband and my laptop is easily connected to it.
  When I get home I can not connect to broadband home.
  I put in all the correct passwords (it uses 3com) but my phone just crash log.
  It is not the home network, because my brothers laptop computer running smoothly at home. The problem is my laptop.

  I could buy a separate connect package and a dongle, but it seems stupid when I should be able to connect automatically.

  Can someone tell me what I could do to please which is not too difficult technically?

  Hello

  You should first check if your wireless network card has been recognized and properly installed.
  I noticed that in very rare cases the WLan driver was not installed correctly and there was a yellow exclamation point next to the WLan card.

  The WLan driver correctly installed is essential to connect the laptop wireless.

  Welcome them

• Satellite Pro A60 failed to connect to the network after the fashion watch

  Satellite Pro A60 running XP Home.

  When I close the lid it goes mode 5000mAh as set upwards. When I lift the lid, I find that I have to restart to re-establish the connection to the internet through the wireless router. When this happens other computers using the same router not disconnected.

  I've heard talk about this but I got lucky and on my Satellite WIFI connection works after minutes again. Have you tried to deactivate and activate the WLAN using FN + F8 key combination?

  Maybe after short toggle the WiFi works again.

• Tecra A10 with Intel WiFi 5100 running Vista 32 bit fails to connect WiFi

  Hello

  a whole new Tecra A10 with buildin Intel 5100 WiFi fails to connect to the Wlan router, using the pre-installled Vista Business 32-bit. Vista has always said: wrong password.

  Yes, Wifi hardware is enabled, of course. And Tecra WiFi OK MAC is stored in the config of the router. Also the WiFi settings were correct (wpa2-psk aes), corresponding to the Wlan router. Password WPA2 is 13 characters. Connect all the other machines with a Wlan successfully turns a working Wlan configuration and use of the correct password.

  I installed the latest driver on the Toshiba site - without success. I also installed the version of the driver from the Intel site will, too--without success. Doesn't matter what tool I used to connect, Vista itself, or the specific tool of Toshiba (Radar), choice to get an encrypted Wlan connection.

  WPA2 and WPA or WEP can be used. I can't get a Wlan connection when encryption is totally * disabled *! Currently, I use a * clear * Wlan to use this Tecra A10 in the network. Real gross and no solution for more than a few days.

  All other devices in the same network can connect the router Wlan with WPA2-PSK and WEP, no problem. Only the A10 / WiFi 5100 fails.

  Searching the Web I found really many reports all issue of WiFi with a WiFi 5100 devices, so it seems to be a generic material or / and driver issue.

  How can I correct this Wifi 5100 connect problem and use encryption WPA2-psk on Tecra A10 and WiFi 5100 with Vista? If this is not possible, I have to return this laptop and get another model with a working Wifi / Wlan Hardware.

  Thank you.
  -Thomas

  Hello Thomas

  Have you tried to connect your laptop to another router by friends or elsewhere?
  It is really strange that you can use any of the WIFI ciphers available.
  Have you tried to reboot your router?

  I have Satellite A300-1LI with the same card, WLAN, preinstalled with Toshiba recovery WXP image and I use it sometimes linked to the WLAN with WEP encryption.
  Have you tried to contact Toshiba or your local dealer for advice?

• Satellite P200 - failed to connect to the Windows Services

  After starting Windows Vista on my Satellite P200, I received a message: failed to connect to any Windows Services.The event notification system file are not available.
  Use restricted to the mode of administration.

  No network supports either (wifi, Ethernet,...). At least I can use the PC in batch mode!
  Unable to retrieve a previous saved file system.

  I need to restore my Toshiba restore disk Win Vista?

  Do you offer a lighter solution?

  It's strange, but what you mean with batch mode?
  You can start in safe mode?

  I think the best way is to reinstall Windows with the recovery disk. It only takes a few minutes and then you have the new installation of Windows with all the drivers and tools of Toshiba.

• Drive not work in IE and saying failed to connect with fingerprint sensor

  Hi all

  I purchased a Qosmio x 500 10 t a couple of months back. For the first two weeks, I had no probs using the fingerprint reader to log on windows and connect to Web sites in Internet exploer.

  All of a sudden it would not work on any website that is stored. The Green banner was shown in the upper part of the site and asked finger drag, but nothing happened when I slipped. I rebooted and it worked again but not for long before failing. This time a restart didn't work so I deleted my fingerprints and Web sites and started from scratch. It worked for a few attempts before probs started. And to try to enter the utility of fingerprint it says the connection of sensor failure. So, I did a system restore. He worked for some time yet and then same probs. So I found the update utility software, uninstalled the old and put on the new. Even once worked for a couple of times then failed.

  I couldn't find anything about it is stuck in the registry but to be on the safe side I did a full system own return to the original using disks of backup configuration. Hey presto, I thought that he had worked. Everything goes ok for the first 24 hours and then same problems start to occur. Only this time it's also prompting me to register fingerprints even if I already have. And when I try to enter the utilioty it says cannot read the sensor again.

  The fingerprints for windows log still works as long as I do not close the utility of fingerprinting before stopping. If I quit the utility I can't reopen it as it says failed to connect to the sensor only. And then I have to uninstall and reinstall the utility software. Aty at the time where he occasionally works on sites stored Web, but most of the time it does nothing.

  Help, please. I have to return Toshiba laptop?

  Have you seen this FAQ?
  + Log on to websites with Authentec Fingerprint Software (TrueSuite) and Internet Explorer 8 +.
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=62

  I recommend looking in the forum and read the HowTo and FAQ section in this forum
  Could still be interesting

• I am not able to connect on my Satellite A10

  I left my Toshiba Satellite A10 at home and a vacation for about a month and a half, but when I came back and switch on my laptop I can't spent the ctrl + Alt + Delete at startup. If anyone has the delicacy to this, could you please let me know.

  Concerning

  HI Kepueli,

  Please could you giove us a little more information about your problem? What OS do you have? What happens exactly when you will start and try to connect?

  Kind regards

• Satellite A10: Cannot recover system with recovery CD

  Hej everyone!

  I was struggling with a strange problem lately, I can not understand yet, so if anyone has any ideas so pls...

  I have 2 laptops Satellite A10. I lost the CD of recovery to one of them, so when I tried to reinstall the laptop I decided to use the other one recovery CD to do that because they are the same... at least I thought they were...

  I repartitioned the laptop with fdisk and made the partition active, formatted and then when I boot with the recovery CD, it began, began to dump files, but about 20%, he just say 'impossible recovery' or something "partition is not active" and restart. When I rebooted, it saw that the format of the C partition was gone (he said unformated or damaged partition).

  Now, I tried 1 partition, 2 partitions, FAT32 and NTFS, no joy... I think you must have some special configuration of partitions to ensure the success of the recovery, but I don't know how.

  I have not tried to reinstall the other laptop with the recovery CD because I'm afraid that it's too bad...
  Can someone help me pls?
  BR
  / Linus

  Hello Linus

  Before you begin the recovery procedure, it can't do anything. Simply start the recovery procedure. I don't really know why the recovery procedure stops after 20%, but please do not prepare HARD drive before using the recovery procedure delivered.

  If I remember well you have two options before the start of the recovery procedure: standard and expert mode. If you use the standard mode is wiped the entire HARD drive and recovery image will create a partition (the whole HARD disk capacity). Using expert mode you can create a clean partition and later in management of the disks (under WXP) create the second logical partition.

  Please try both options. If the recovery CD is not damaged I really don't see any reason why the recovery procedure can be done successfully.

• Broken screen, external display mode standby with Satellite A10 S203

  Of my Toshiba Satellite A10 S203 screem is broken, it's all guts, the colors and the black spaces. I plugged the laptop with an external display, but as soon as Windows starts the external display is in stand by. How can I change this?

  Hello

  I had this problem as well before. After Windows starts the video reset Resets the video output to LCD screen instead of external monitor. Once this is the case try to use the Fn + F5. If this does not work, you might be able to start and press F8, once it gives you the windows selection menu go to safe mode. Once there go to video properties and change the default settings for the external monitor and try to restart normally. Should do wonders. Hope this helps, if not let me know.

• What CD/DVD drive is compatible with the Satellite A10 S103

  I use the laptop Toshiba Satellite A10 S103 and I am about to replace the CD/DVD-ROM drive of origin by a new who can also write CDs and DVDs.

  However, I got a notice, that after the installation of the new DVD to drive the "IDE #1 error" message may appear. According to my knowledge, this error can be avoided by replacing the old disk with a new one which requires the same Primary/Secondary Master/Slave/cable select settings like old.

  Can you recommend a drive of DVD - RW which could replace the old DVD - ROM drive and would work without any additional adjustment of HW?
  The new DVD - RW drive should be similar to know
  [http://www.sonynec-optiarc.de/en/exhibits/slim-line-drives/ad-7540a.html].

  However, I was not able to decide that if this device will be or does not work in my computer that I don't know the parameters of the original DVD.

  My original Toshiba DVD drive information as follows:
  ' 1. ' "model SD-C2612
  2 "ROM worm." 1315
  3 'serial No.' 394N002659
  ' 4. ' 302 ' version number.

  The computer is already out of warranty

  Thank you.

  > However, I got a notice, that after the installation of the new DVD drive "IDE #1 error" message may appear. According to my knowledge, this error can be avoided by replacing the old disk with a new one which requires the same Primary/Secondary Master/Slave/cable select settings like old.

  You are right. FDI #1 error is displayed because the BIOS doesn't recognize the new internal CD/DVD drive because of the wrong master/slave/c-salt settings.
  Usually, these settings are fixed and cannot be changed on the external sides with another position of the rider.
  The firmware controls the notebooks internal parameters ODD.
  The use of ratings taken in charge and compatible is so very important.

  Sorry, but I didn t find details of compatible CD/DVD players.
  Did you look in the user manual of your laptop series?

  In my manual, I found some info on my laptop-compatible players.
  So maybe you are a lucky man and your owner's manual will provide useful information.

• "Device Failed to Connect" sound notification with no popup at startup once the desktop appears

  When the desktop appears, I sound "dududu" with no popup. I had to look it up in the audio file and the explanation next to it said noise "device failed to connect.

  I currently have no device attached except speakers and keyboard and mouse. I bought a HP Phopsmart printer and installed but it does not work well, so I uninstalled it. I left the USB cable connected to the computer after disconnecting the printer after reboot several times, and then disconnected. At this time the sound notification has begun.

  I don't know if the printer had nothing to do with it. What should I do to fix this? Help, please. Thank you.

  Hello

  Have you tried to remove your printer as described in the article?

  If no, then try and see if the problem still occurs.

  Also check if the answer given by SpewHole (published on Thursday, April 1, 2010 04:51) helps you in the thread/link below.

  http://social.answers.Microsoft.com/forums/en/vistahardware/thread/c5737e52-b7a7-4c68-B27B-89adb8343716

  Check back for red or yellow bangs in Device Manager and post status.

  Steps to open Device Manager:

  1. click the Start button, type devmgmt.msc and press ENTER.

  You can also check if the problem persists in safe mode and post back with the State, so that we can help you better.

  To use the safe mode option, follow these steps:

  1. reboot your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.
  2. use the arrows to choose appears in the Advanced Options in Windows Safe Mode menu and press ENTER.

  http://Windows.Microsoft.com/en-us/Windows7/what-is-safe-mode

  Kind regards

  Umesh P - Microsoft Support

• Failed to connect with the user name "Administrator".

  Hello

  I want to configure vCD in VCO, but I am faced with error. I'm by train through the configuration of the vCO.

  I get the error message https://10.99.133.212:443 , Failed to connect with the user name "Administrator". And the description of the error is: "the API version information could not be obtained for the host https://10.99.133.212:443 () (administrator@System)!'."

  Here are the entries I provide:

  Host: 10.99.133.212

  Organization: System

  Authentication: basic

  Session: shared

  and name of user and password.

  What could be the error here? My vCO has IP 10.99.129.33. And I imported the vCD also SSL certificate.

  Kind regards

  Bethy

  You must first remove the new plug-in...

  VMware KB: Uninstall a plug-in for VMware vCenter Orchestrator

  Remember that you use step 6.3 in this article to delete the contents of the package as well. To verify that the workflow and actions have been removed, check that the following workflow category (and all children of it) no longer exist:

  / Library/vCloud Director

  And all related Action modules should have disappeared as well:

  com.vmware.library.vCloud. *.

  Once you have completed all steps of the KB, install version 5.1 of the plugin, configure and restart the vCenter Orchestrator Server service, once again to complete the installation.

• Satellite L855 - 11 p: Win 7 - user profile Service failed to connect

  Can not connect. The message reads user profile Service failed to connect. User profile cannot be loaded"

  Y at - it a bypass key?
  Ideas please.

  Fine machine when I logged out/shut down last night but can not pass this message today.

  Hello

  Please take a look here in this Microsoft Knowledge base article:

  [You receive a "the user profile Service has no logon error message:"] http://support.Microsoft.com/kb/947215]

  There are different ways to fix it.

  Your comments would be appreciated.