Satellite A100-523: I do not mean the bottom during audio playback

Similar Questions

• Satellite A100 (PSAARA) - I can not use the remote control

  I used Toshiba A100 PSAARA, but now I can not use the remote control to operate all things?

  Thank you!

  If the remote control suddenly stopped working trying to restore the operating system to an earlier time using System Restore tool.
  If this does not help please let us know.

• Satellite A100 - 166 PSAA9E will not charge the battery

  Hello

  My laptop will not charge the battery.
  Although Windows Xp recognize the battery and says loading, the battery does not charge.
  I tried with a spare battery that I thought that the battery was faulty, with the same results.

  Strange thing is, when I turn off the laptop the power led remains lit and the blue, even without the power supply attached therefore discharge the battery.
  The battery led is still orange but not load!

  What is the problem with the laptop?
  Thank you

  Hello

  Generally, there are three possibilities;
  (1) the adapter is faulty
  (2) the battery is faulty
  (3) the logbooks electronic malfunctions (ESF)

  So now he of needed to check all these steps to find the fault.
  You said you've tried different batteries and AC adapter works too.
  So it is possible that there is something wrong with the electronic power supply

  In this case there is not much to do to contact the ASP in your country. Technicians should check the portable and should run diagnostics tests

  I recommend contacting the guys and ask for more details and manipulation still good luck and happy new year.

• Satellite A100-033 - ODD does not read the CD but DVD

  My CD player has started giving me problems.
  He doesn't read any CD I put in (particularly the CD Audio).

  It plays DVD fine.
  I am also unable to burn CDs that the system does not detect a CD.

  Any suggestions on what I should do?

  Hello

  May be there is dust on the lens of the CD/DVD drive so I recommend cleaning the lens.

  Further, you should try to remove the upper and lower filters in the registry. Is often solved with the CD/DVD drive to check workaround on the Microsoft Web site:
  http://support.Microsoft.com/kb/314060

  In the worst cases, the CD/DVD drive must be replaced :(

• Satellite A100-062 psaane: can not get the card reader to work

  Hiya... Please can someone help?

  I try to use my card reader with a Pro duo stick.
  I put it in the Pro duo adapter and when I put the card in the slot of the card reader that nothing happens...

  Thank you in advance if you can help.

  cordially imalive

  I use the memory stick duo adapter and when I on it on the inside of my Satellite in Windows Explorer is happening again drive (F) and symbol that shows Memory Stick.

  Try to please several times to put inside. I remember that in my case it worked after the third time I put it in the slot.

• Satellite A300-20 q are not on the tech support page

  Satellite A300-20 q are not on the tech support page. I can see 20 p, 20R, but not 20 q. Even a model automatic detector cannot find it in a database. Correct this error.

  Hello

  I don't know which pages or the database, you are meaning, but the Satellite A300-20 q is not available in all countries!

  This model was released for the Russia market.

  Other models of Sat A300-xxx are avaialbel on the other countries of South-East European/medium.

  Welcome them

• Satellite A100 - multimedia keys do not work correctly with Win XP

  Hello

  I use a Satellite A100 with Xp sp3.
  Recently, the media keys did not work properly.

  When I open the Windows media player 11, I can go to the previous song, but I can't stop, pause, or skip to the next track by pressing the keys.
  Is this a hardware problem?

  Any help? Thank you.

  Hello

  I doubt that its material related question I think that its software I m thinking: Reinstalling Drivers and tools

  First install the common Module. This should me installed initially.
  Then, install the tool called controls.

  All these applications can be found on the European driver Toshiba page.
  You must choose the right model number!

  Check it!

• Satellite A100: Media buttons do not work

  Hello!

  I have the Satellite A100, Windows XP SP2. All the media buttons on the left of the keyboard has stopped working. They worked yesterday, I did not install anything or even shut down the computer since then. They just stop working.

  Can someone help me to fix it?

  Thank you!

  Hello

  I think you should first of all, clean the registry.
  You can use a freeware tool called CCLeaner. It s great. I also use it.

  After removing the old Toshiba control Utility and cleaned the Windows registry reboot once more and install first the common Modules!
  After the installation of common Modules install Toshiba controls.

  Good luck and feedback would be highly appreciated.

  Good bye

• How right message pane of is not on the bottom?

  I like to see the message on the right side of TBird... not on the bottom. Is it possible to move the e-mail message pane?

  In the menu, see. Page layout

  Looks like you want to view "vertical."

  No menu? Under Linux or Windows, press the < alt > key to see the menu.

• Grammar red line will only appear on the words misspelled on the half top of my document, but not on the bottom half how to fix this?

  Grammar red line will only appear on the words misspelled on the half top of my document, but not on the bottom half how to fix this? I am writing an essay and I know I misspelled words it contains, but the red line will not work. What should I do about it?

  Hi Brittany,

  You use Microsoft Word?

  If you use Microsoft Word, you can post your request in the Forum Office for assistance.

  Microsoft Office Forum

• Windows Experience Index problem: could not measure the performance of video playback

  My pc is not yet rated. When I click on rate appears on this computer, a msg error saying that Windows Experience Index for your system could not be calculated, could not measure the PERFORMANCE of VIDEO PLAYBACK. What should I do. Help, please

  Hello

  Here are a few things to check before launching performance index Windows (WEI).

  • Quit all running programs, and restart the computer before running the assessment (WEI).
  • Check with the manufacturer of the computer or the motherboard manufacturer for BIOS updates.
  • Make sure you have the latest Windows 7 compatible drivers for the graphics device installed (video card).
  • If you have any third-party media players installed, uninstall them until the end of the evaluation of the WEI.
  • If you have installed any third-party Media Codecs, try to uninstall them until the end of the evaluation of the WEI.

  Open Windows Explorer and navigate to the folder C:\WINDOWS\Performance\WinSAT .

  You should see the following 8 videos.

  2 files with .mp4 extension.

  3 files with the .mpg file extension.

  3 files with .wmv file extension.

  Double-click each of these files. They should open and play in Windows Media Player. These are the files that WEI runs video performance.

  One thing to remember is that the WEI score is only an indicator of the ability of the main components of hardware on the computer. It has no effect on the performance of the system.

  Tell us what you find.

  Concerning

• Problem with WEI: could not measure the performance of video playback.

  Hello, Microsoft

  First of all I'm new to the forum, Please warn me if I posted in the wrong section, or did something wrong.

  I have a laptop, (x 86) Win7 Home Premium. Before posting, I tried everything Microsoft sugguests and nothing will do, as the update of the graphics card, etc. WEI did not work as usual today, I got the problem said: could not measure the performance of video playback.

  Here is the winsat.log

  180337 (1304) - winsat\logging.cpp:0815:-BEGINNING 2014\1\23 20:20:42 -
  180337 (1304) - winsat\main.cpp:4301: command line = "C:\Windows\system32\winsat.exe" formal - CancelEvent 0f602be3-3268-4fb8-be81-0ebe47022e9b
  180337 (1304) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occurred
  180352 (1304) - winsat\main.cpp:4474: > IsFormal is TRUE IsMoobe = FALSE.
  180399 (1304) - 4585: Watch dog system active
  180399 (1304) - winsat\main.cpp:4600: watch dog timer 600.0 seconds hand
  181491 (1304) - winsat\main.cpp:2505: > DWM doesn't work do not.
  181491 (1304) - 2470: > EMD service will be restored to the exit.
  181507 (1304) - 0983: > read the active power as «381b4222-f694-41f0-9685-ff5bb260df2e» mode
  181507 (1304) - 2793: > power policy saved.
  181928 (1304) - winsat\syspowertools.cpp:1015 >: 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c value of the power system active"
  181943 (1304) - winsat\main.cpp:2814: > policy set to maximum power.
  183020 (1304) - winsat\logging.cpp:1763: ERROR: phase enter/leave imballance
  183020 (1304) - winsat\main.cpp:0948: > IsOfficial = TRUE IsFormal = TRUE IsMoobe = FALSE RanOverTs = FALSE RanOnbatteries = FALSE
  183035 (1304) - winsat\main.cpp:1775: > Run Assessment features
  183566 (1304) - winsat\main.cpp:1775: > Run Assessment dwm - aname DWM-time 10 - fbc 10 - disp off - normalw 12 - width 1280 - height 1024 - winwidth C (1144) winheight - C (915) - rendertotex 6 - rtdelta 3 - nolock
  184190 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  184190 (1304) - winsat\processresults.cpp:4018: > wrote bandwidth video memory to register 0
  184190 (1304) - winsat\main.cpp:2037: > DWM Assessment results treatment SUCCESS
  184190 (1304) - winsat\main.cpp:1775: > Run Assessment d3d - aname Batch - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 300 - batchcnt c, point 10 objs - C (26) - rendertotex 6 - rtdelta 3 - texpobj c (1)
  184767 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  184767 (1304) - winsat\main.cpp:1775: > Run Assessment d3d - aname Alpha - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 300 - batchcnt C (75) - C (26) objs - rendertotex 6 - rtdelta 3 - texpobj c (1)
  185344 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  185344 (1304) - winsat\main.cpp:1775: > Run Assessment d3d - aname Tex - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 500 - batchcnt C (125) - C (20) objs - noalpha - texshader - totaltex 10 - texpobj c (4) - rendertotex 6 - rtdelta 3
  185906 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  185906 (1304) - winsat\main.cpp:1775: > Run Assessment d3d - aname ALU - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 500 - batchcnt C (125) - C (20) objs - noalpha - alushader - totaltex 10 - texpobj c (1) - rendertotex 6 - rtdelta 3
  186467 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  186467 (1304) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname Batch - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 300 - batchcnt c, point 10 objs - C (26) - rendertotex 6 - rtdelta 3 - texpobj c (1)
  187013 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  187029 (1304) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname Alpha - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 300 - batchcnt C (75) - C (26) objs - rendertotex 6 - rtdelta 3 - texpobj c (1)
  187591 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  187591 (1304) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname Tex - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 500 - batchcnt C (125) - C (20) objs - noalpha - texshader - totaltex 10 - texpobj c (4) - rendertotex 6 - rtdelta 3
  188168 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  188168 (1304) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname ALU - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 500 - batchcnt C (125) - C (20) objs - noalpha - alushader - totaltex 10 - texpobj c (1) - rendertotex 6 - rtdelta 3
  188730 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  188745 (1304) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname GeomF4-time 7 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 150; 200; 241 - batchcnt C (50); C (200); C (300) - objs C (12); C (26); C (45) - noalpha-geomf4shader - texpobj C (0) - rendertotex 6 - rtdelta 3 - tierframes 60 - tiertime 1
  189291 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  189291 (1304) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname GeomV8-time 7 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 75; 100; 120 - batchcnt C (25); C (100); C (150) - objs C (8); C (17); C (29) - noalpha-geomv8shader - texpobj C (0) - rendertotex 6 - rtdelta 3 - tierframes 60 - tiertime 1
  189868 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  189868 (1304) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname CBuffer - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 75 - batchcnt C (25) - objs C (8) - rendertotex 6 - rtdelta 3 - texpobj c (1) - cbuffershader - cbufa 2 - cbuff 5 - cbufp 6
  190430 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  190430 (1304) - winsat\main.cpp:1775: > Run Assessment mfmedia-input C:\Windows\Performance\WinSAT\winsat.wmv - nopmp
  190804 (1304) - media\mediaerror.cpp:0151: mfmediatest.cpp @ 445: 0 x 80070070 == ERROR_DISK_FULL
  190804 (1304) - media\mediaerror.cpp:0095: error: failed to start NT Kernel Logger.
  190820 (1304) - winsat\main.cpp:2056: > assessment mfmedia FAILED because of an error
  190836 (1304) - winsat\processresults.cpp:4018: > wrote bandwidth video memory to register 0
  190836 (1304) - winsat\processresults.cpp:1274: not limiting DWM Score 1.0 - no DWM performance score
  190836 (1304) - winsat\processresults.cpp:1405: this WDDM, considering D3D score 2.0
  190836 (1304) - winsat\processresults.cpp:1480: > partition disk writes in register 0
  190960 (1304) - winsat\syspowertools.cpp:1015 >: 381b4222-f694-41f0-9685-ff5bb260df2e value of the power system active"
  190960 (1304) - winsat\main.cpp:2855: > state restored power.
  190960 (1304) - winsat\main.cpp:2870: > Successfully reenabled EMD.
  190976 (1304) - winsat\main.cpp:2896: > SystemRoot Composition
  190976 (1304) - winsat\watchdog.cpp:0311: Watch dog system shutdown
  190976 (1304) - 4909: > exit value = 1.

  Please help, THX 1 billion

  Hello Derek,.

  Please keep us updated on the status of the issue.

  I'm sorry for the late reply.

  The IFE can be used to show what part of the system should provide the largest increase in performance when it is upgraded. For example, a computer with the lower under-score in his memory, would benefit more than an upgrade of RAM to add a faster hard drive (or any other component).

  Also see this article:
  What is the Windows experience index?
  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-experience-index#what-is-Windows-experience-index=Windows-7

  I hope this information helps.

  Thank you

• 500 Dignostics Performance event. could not measure the performance of video playback

  Hello

  Could someone help me with the problem of (the windows experience index) when I run the assessment I get the message (could not measure the performance of video playback).

  Hello

  ·         You have made no changes to the computer until the problem occurred?

  ·         What is the full error message or code that you get?

  Event ID 500 is mainly caused by the excessive use of graphical subsystem, which is controlled by the process dwm.exe. DWM.exe is a Desktop Window Manager and is responsible for the graphics effects in Windows operating system such as 3-d effects, previews of windows and transparencies to windows live.

  I suggest to disable all of the features of "Aero", such as the use of classic Windows rather than the Windows Aero feature, stopping using 3D desktop and so on, in order to reduce excessive system resource occupancy rates. If possible, you could develop RAM to increase performance of the system to check if the event has not changed.

  You can also try to update the graphics driver and check if it helps. To do so follow the link below:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• I had a note at the bottom right, saying that my Windows 7 was not authentic.

  Corner of Windows 7

  I got a note on the bottom right saying that my Windows 7 was not genuine... what he speaks and should I worry.

  Here's what you asked for.

  The Windows tab:
  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-* - 73CQT - WMF7J-3Q6C9
  Windows product key hash: RmurcM3ZxzWyfEP9WtPUJw = + KaFG
  Windows product ID: 00359-OEM-8992687-00010
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {3754BDE1-7941-4E28-9FD6-78E99D9E9B3C} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.120503 - 2030
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {3754BDE1-7941-4E28-9FD6-78E99D9E9B3C}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-3Q6C900359-OEM-8992687-000102S-1-5-21-1573336260-1148118520-3100803624Hewlett-Packardp6604fAmerican Megatrends Inc.. 6.02 20100721000000.000000 + 000C6F73307018400F410090409Central Standard Time(GMT-06:00)03HPQOEMSLIC-CPC109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800010-02-1033-7600.0000-2052009
  Installation ID: 011014254221589280652336857063574575147061894094927390
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 3Q6C9
  License status: licensed
  Remaining Windows rearm count: 3
  Trust time: 31/07/2012 21:07:13

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000000
  Event timestamp: 7:31:2012 06:14
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current Hash HWID: KgAAAAEAAQABAAEAAAABAAAAAQABAAEAonaCsi7gIJEo + FTIAqiWPhh5

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  HPQOEM APIC-SLIC-CPC
  FACP SLIC-CPC HPQOEM
  SRAT HPQOEM SLIC-CPC
  HPET SLIC-CPC HPQOEM
  MCFG SLIC-CPC HPQOEM
  SLIC SLIC-CPC HPQOEM
  LASRYVITRAGE HPQOEM SLIC-CPC
  SSDT HPQOEM SLIC-CPC
  SSDT HPQOEM SLIC-CPC

  When I check the properties of my computer, it says
  Windows is activated and gives a product ID.

  Not sure why I would have gotten that message.
  Thanks for any help.

  I don't see any problem in your report. It shows that activated and validated.

  The notice showed that when you ran the report?

• scrollbar thumb skin does not reach the bottom of the track

  I have a Flex 4.1 application when there is a vertical list, related to a table. As long as the list scroll bar is not skinned, everything is ok, the thumb oscillates up and down the track. But after the addition of a skin, it fails. The thumb never goes all the way down the track when scrolling, but blocks somewhere between the two. For the very long list of items, it even stops at halfway.

  Despite this behavior, the list is actually scrolls to the last item - so the problem is not with some elements at the bottom of the list being inaccessible, but only on the thumb not reaching the bottom of the track, which looks as if the list was stuck at halfway. The skin is very simple and it is pretty much set a picture for the track and the thumb. Is there a method to make sure the thumb always goes to the bottom of the track, the size of the list without worrying?

  Try fixedThumbSize = "true" on the VScrollBar. In addition, it can help to add constraints to the fxg. For example:

  I would like to do the same for the track to make sure that the dimensions of each component is correct. The Scrollbar skin itself seems correct.

  -Kevin