Satellite C850D-115 - problem with USB 3.0 port

Similar Questions

• Satellite M70-190 - problem with USB

  Hello!
  After you uninstall Windows XP and BIOS update, I have a problem with the USB ports. My work does ' t of USB flash drive. Windows also find a USB flash drive, but I can't find it in "my computer".
  If anyone idea about this problem?
  PS, External HARD drive works perfectly, as the USB mouse and USB WiMax modem.
  I m hoping someone out there can help with this problem.

  If I understand you well you don't have problem with USB port, but with a single USB device. Right?

• Satellite C850D-M0010 - problem with graphics card

  Dear team,

  Please ask you to solve this problem.

  I have laptop Satellite C850D-M0010 (64 bit) with me. I recently made a new image on my system as the system was very slow due to the attack of virus.

  After formatting, I'm not able to run that bubbles from the screen saver on my system.

  Is showing, «screen saver can't run because it requires a more recent or Direct 3D-compatible video card»

  I downloaded the display driver toshiba site 'view AMD driver - 8.942 - 120213 a-134211C-Toshiba'.

  After extracting and running the pilot, there is no change.

  Screenshot of the same is attached.

  Ask that you get me a solution for this.

  Kind regards
  Ruggeri.

  Guys!!!!!!!!!!!!!!!!!!!!!!

  Can someone help me on this problem?

  Kind regards
  Ruggeri

• Re: Satellite U500-115 - problem with the bluetooth mouse

  Hello everyone,

  I use a bluetooth mouse Saitek mouse with my Satellite U500-115 (OS: windows 7) and a have a real problem that is boring:

  Every time that I do not use the mouse for 10 or 20 seconds the pilot (or what ever) rocking in a kind of 'sleep', and it can take up to 1 minute until the mouse is available again. It is defenitely is not a mouse problem. I tried the mouse with a laptop LG and a windows xp sytem and it worked perfectly.

  I tried the following:

  1 put in place the current on the site of Toshiba bluetooth stack--> having not caused no difference in behavior.
  2 put the mode to 'Full Power' energy saving--> that seemed to have some positive effect, but not always. Sometimes the time until the sleep mode begins seems to be a little more but not always. In the "Full power" the mouse seems to go back a little more quickly when he woke from the mode "standby mode".

  Test: as I wrote this text, the mouse driver began the "sleep mode", now I'll move the mouse and take the time needed until the mouse will respond again a moment):
  45 seconds

  Is it possible to put the bluetooth HID in some sort of "permanent way"? At least the touchpad also reacts independable mode of energy of the laptop; This is why I think that it should be possible to use a bluetooth HID in the same way.

  Thanks for any help!

  Michael

  Hello

  Go to Device Manager, click Bluetooth radios and choose the generic bluetooth adapter. Then, right-click and select power management properties, umark, allow the computer to turn off this device to save power and press Ok.

  I don't have a bluetooth mouse, so I can't check if works. Just assume...

• Satellite P300D-14F - problem with USB

  Hello

  I want to make a USB to boot, but the laptop does not recognize (I mean in the bios)

  For example, when I connect the external hard drive (1 TB, Hitachi HDT721010SLA360) I can see it in the Start Menu (http://s017.radikal.ru/i432/1202/20/b7b7edd221f9.jpg)

  But when I connect my USB drive (Transcend JF V30 / 4Gb, JetFlashTS4GJFV30) I have not even USB option in my Menu of Boot (http://i021.radikal.ru/1202/67/6bae3812f88c.jpg)

  Have problem in my USB?
  If so, could you please tell, what are the usb key properties must work properly, so that I could do the usb startup key.

  P.S.: on the first time 1 TB of HDD and USB connected photo (also connected SAMSUNG HD501LJ 500 GB), the second peak connected the USB _only_

  Hello

  To my knowledge, it there has not of special requirements to the USB flash key, a common USB should be recognized correctly as boot device.

  Of course, it might be possible that there is a problem with your USB key
  On the other hand, it might be possible that your USB drive is not formatted correctly.

  I think you need to format the Flash DRIVE to FAT32 standard and need to make it bootable.
  If this does not help, try another USB flash memory.

  Good luck

• No drivers BUS SM for Satellite C850D-115

  Hey,.

  I have a problem:

  On my Satellite C850D-115 is a missing driver. BUS SM driver. I can't find it on the Toshiba support site. This part of the chipset driver driver? I can't find whether :(

  Model number: PSC9UE
  Serial number: 1D41499R

  Thanks for the help,

  mrz_

  Post edited by: mrz_

  For AMD chipset driver machines is not available. Make sure that you have installed all the stuff offered on the Toshiba download page.
  Have you installed the card reader, USB driver and display driver?

• Big problems with USB devices

  Since I upgraded to El Capitan I have several, serious problems with USB devices:

  1 USB hard drive: everything by watching a video from an external hard drive, the hard drive will be to disassemble all the minutes, the video will be of course hang and it takes 45-60 seconds until the drive reconnects. I also can not boot from any external hard drive more. Booting from a USB key works fine.

  2. I can't transfer my Sunny BT11 of beam data more. The Sunny Beam is a device that records the data of my photovoltaic plant. The overview of the system he sees when connected via USB, however he is not recognized and so I can't transfer data files. Also, it makes not a difference if it is connected via a USB hub or directly, the two versions do NOT work. In the Finder preferences, all devices are controlled to display on the desktop.

  The two scenarios always perfectly work with my Mac mini that has not been updated and uses Mac OS X 10.10.

  Hello Gulliver,

  It seems that if you live with loss of connection of your USB devices since the installation of Mac OS X 10.11 El Capitan, is that correct?

  I suggest that you are troubleshooting by following the steps in this article - OS X El Capitan: If a USB device does not work

  Thank you for using communities of Apple Support.

  Sincerely.

• Problem with USB HUB using Windows 7 on Bootcamp

  I have an iMac when I installed Win 7 with Bootcamp. I have problem with USB hub. If I connect USB devices (printer, iphone... etc...) directly to my computer, it works without any problem. But if I connect them through USB hub, that they do not work properly. The sound instantly invites you, but certain peripheral functions partially and some not at all. I tried several USB hubs... same problem for all. Any solution? Thanks a lot for your answer.

  Hello

  I suggest you to see link and check.

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  I also suggest you to contact the apple support and check.

  http://www.Apple.com/support/

• Tecra S5 - slow ethernet with USB 2.0 Port Replicator

  Hello

  I have a Tecra S5 with USB 2.0 Port replicator II. I have 3 ethernet connections all together on my PC: LAN on motherboard, WiFi and the other on the USB port replicator.

  At home, I use WiFi for internet connection and USB to Ethernet to a wired connection to devices with built-in web server.

  My problem is that when the WiFi and USB to Etherenet is active the internet and the connection to the web server works but vey slow.
  If I turn off the WiFi and connect to the web server works properly.
  If I disable USB for Ethernet internet connection works correctly.

  Anyone has same problem and suggestion how to solve?
  I downloaded the latest drivers from the Toshiba support page.
  My OS is XPSP2.

  Concerning
  jballa

  Hello!

  It looks like a network configuration problem. Check the network addresses and configuration in command line with the command ipconfig/all.

  Try using static IP addresses. I think that the DHCP server takes a long time to go send an IP address to each laptop.

  Good bye

• Satellite A300-y00 come with s-video output port?

  Satellite a300/y00 come with s-video output port?
  Where can buy the cable to this port, or I can buy anywhere or buy from toshiba dealer?

  Hello

  This seems to be an Australian series for Toshiba laptop so it was designed for the Australian market. I'm not very well if this series of portable supports the m s-video output port.
  The point is that there are different models A300 and the s-video output port has not been installed in all mobile phones of the A300.
  I found a manual and it says that the s-video, put it port depends on the model you have purchased.

  Usually, it should be placed on the left side between the vents and the output HDMI port. Check it out.
  If there is no s-video output port then the laptop does not support it.

  Good bye

• Problem with usb boot on Satellite A-50

  Hello
  I had a problem with a usb tip. When I insert a usb key, I can't start my computer by usb. I selected the option of a disk boot, but doesn't run. I have a "Satellite A-50-522. I have to update the bios?

  Greetings,

  Hello

  You can try to press F12 when the Toshiba screen! A small start menu appears. Choose USB - FDD and then it should work.

  Campino Bye

• Satellite L870: Problem with USB to serial interface with FTDI chipset

  Hi all

  bought a L870 year last to run software amateur radio via USB to the serial interface.
  Interface uses the FTDI chipset.

  The problem I have is that the switch on the led on the interface flashes green to red several times to indicate that it works, but then must remain on green but task on every minute she goes through the same process again.

  All the controls on the drivers and the Manager of devices indicates that everything is ok. No problem with interface on computers laptops happens or advent.

  Is there anything on the Toshiba laurys usb ports every minute.

  Thanking you in advance for any ideas

  First of all, I must say that there are different models of L870 Satellite on the market supporting different hardware and software. Some are preinstalled with 8 and some Win with Win 7.

  In addition the L870 supports USB 2.0 and USB 3.0 standard.
  If you recommend to check the different USB ports and check if your software works correctly with the USB 3.0 standard.

• Satellite C650 problem with USB ports

  Hello

  I have a problem with my laptop, with my USB ports.

  A few days ago, I plugged my mp3 to charge its battery. I did when system Windows began and after a few ports seconds has stopped working. They work for one to five minutes after starting my computer, but only after my laptop's turn off for a few hours at night for example.

  They work fine and all of a sudden we hear the sound of a disconnected device and usb ports turns off. I tried many solutions but nothing worked. I removed all the USB ports in Device Manager.

  I checked in the BIOS, but everything seems to be okay. I tried to disable the disconnection of usb ports to save energy, nothing. Tools that have been provided by Toshiba to check hardware see as usb ports work correctly. Only usbdview program sees as unknown device, I tried to uninstall it through this program but still nothing.

  You have an idea, what could happen? Or if there is no possibility to fix without service visit?
  I would appreciate your help.

  Hello

  Have you tested these ports USB plug a USB mouse or a USB keyboard?
  These devices work properly?

  I don t think you need a visit to the service.
  I think that it s just a software problem
  Given that the USB ports are controlled by the chipset, I would recommend reinstalling/updating the chipset driver

  The alternative is a bit drastic, I think about the recovery of the laptop...
  It might be possible that the registry has been confused upward or some 3rd party software preinstalled on the laptop could affect the USB ports.

  I remember that my USB ports do not work after installing iTunes.
  I had to reinstall the operating system once more to get the USB port work even more funny is that I installed iTunes once more and USB worked correctly

• Satellite C660-1PH - problem with Chicony USB 2.0 camera

  Hello.

  I recently purchased satellite C660-1PH and I have a problem with my webcam. When I use Skype the image of me is blurred.

  Any ideas? I looked fot the webcam settings and these are all the default ones.
  What do I have to uninstall and reinstall the drivers from scratch?
  Lia

  Hello

  * @ economid *.
  How did solve you this?

  In my case, the protective film has been mounted on the front of the cam.
  I removed it and the photo quality was much better.

• Satellite L670-1HD - problem with audio interfaces USB 1.1

  Hello

  I have a Toshiba L670-1HD with an Intel HM55 chipset, and an Intel Core i5 460M processor. I use this machine for my music software and that's why I use different audio interfaces external and USB-MIDI-Controller with build in audio interface like Mixvibes U - Mix Control Pro (http://www.mixvibes.com/content/u-mix-control-pro). These built-in audio interface are connected via USB 1.1. Always when I use this audio interfaces interfaces crash audio internalt - the sound is cracked very hard and there are noises in. The controller of all crashes sometimes too.
  When I use another interface audio as an audio interface Hercules DJ Trim 4 & 6 (http://www.hercules.com/uk/DJ-Music/bdd/p/102/deejay-trim-4-6/), which is a USB 2.0, everything works fine. No crashes, no cracks and no noise.
  You could say now that there is no problem and I should stick to the Hercules interface if it does no problem. The problem is that the Hercules is an audio interface only, there is no controller in it with which I can control my music software.

  I've updated all the drivers from the support page of this site without success. Is there a solution available or the Toshiba knows this subject? Am I the only one having this problem?

  Would be nice if a Toshiba official support employer could respond to this message. But this does not mean that I don't want to read somethng submitted by the user for which an index - all Board/Council/recommendation is welcome.

  Thanks in advance for the help!

  See you soon,.

  Stefan

  Hello Stefan

  In my view, you see the problem from the wrong point of view.
  Toshiba and each laptop manufacturer offer product and hardware and software support. So if there is a general problem with the functionality of the material you are by Toshiba on the right address.

  You use a third party and that you have some problems. Do you really believe Toshiba should support you and help to get this external peripheral work? In my opinion not. On the market, there are thousands of different devices and laptop computer how of the manufacturer must be able to test each of them and offer a solution?
  Something like that is definitely not possible.

  In my opinion, you should communicate with Mixvibes and ask for help. They have the best experience with own product and I presume that they are testing the features on different PC/laptop platforms.
  They should know how the device should work on new laptops with USB 2.0.

  It seems silly now, but Toshiba has nothing to do with it. If you have a general problem with the USB ports and they don t work with different devices that Toshiba should ask for help.