Satellite L350D - crashes on startup repair screen

Similar Questions

• Satellite L350-262 - Startup Repair screen displays

  Can anyone help?

  I had a L350-262 only 2 days. Already, I've had the Startup Repair screen appears showing there is a problem and Windows will not work. When the system try to automatically repair it says that Windows cannot automatically repair.

  I have watched the tests diagnostic and repair details and the cause of found root shows that Startup Repair tried several times but still cannot determine the cause of the problem. Last night, I'm sure it says registry is corrupt, but I don't see something like that today? When I go to the advanced options for system recovery and support, I select UK as my keyboard entry method. He said then I must connect to access the system recovery options, and if I have problems logging in to contact the administrator of the computer. I can't seem to login screen if this proves difficult.

  If anyone has had similar problems and if so how did you get the problem solved?

  James

  Hello

  Your ad is somehow a bit confusing and not detailed. You want to say that this startup screen suddenly appears and you didn't change anything on the hardware or software?

  What happens if you try to start in safe mode? Is this possible?

  To be honest right now I think that it s time to reinstall Windows if Windows peut t solve the problem itself.

• I get startup repair screen when I try to boot my laptop from dell inspirion windows 7, I run the scan and detects any errors. When I ran repair usb key received the error 0x400110020000100A

  I get startup repair screen when I try to boot my laptop Dell Inspiron windows 7, I run the scan and detects any errors. So, I tried to use a USB repair for a laptop Dell Latitude Windows 7 pro and I still can't the computer to start. Tried to restore to the factory settings, can not. I have no image, backups, all missing, restore points?

  After that I tried to launch the USB repair I got 0x400110020000100A error code and I received error (0x8007027E) indicating the device will not start without a reboot.

  Anyone know how to fix this?

  Any advice would be greatly appreciated. I'm not computer illiterate, but am not pro either. Just use them not program them or even understand all languages!

  ____________________________________________________________________________________________________________

  Dell Inspiron laptop about 4-5 years.

  Running windows 7 Home Edition.

  Does not start little matter what I tried.

  If I remember correctly, I looked in MS-DOS mode and noticed that it said something like "x: win...» "that seemed strange to me because I thought that it should say"c: victory... "but as I said I am not a computer wiz so if anyone can help me, I would appreciate it.

  I'm about to rip the hair off my head with my laptop. My latitude was blue planned, surprisingly I fixed it (don't ask how, you couldn't tell). Then my dell inspiron would not start right after my dell latitude fell out of my truck and landed on the sidewalk, wanted to kill the person, the screen is broken. I can use it but it is very difficult, see a mosquito net and not perfectly clear, works well. lol someone knows somewhere or that would install a new screen for a reasonable price? I live in the Boston area.

  Back to the laptop won't start not, when I ran repair USB key received the error 0x400110020000100A

  Hello

  Thank you for the update on the issue. I appreciate your time and effort in resolving this issue.

  You can try the following methods and check if it helps.

  Method 1:

  You can use the Bootrec.exe tool in the Windows recovery environment (Windows RE) to troubleshoot and repair the following items in Windows Vista or Windows 7:

  • A master boot record (MBR)
  • A boot sector
  • A Boot Configuration data (BCD) store

  Note: When you are troubleshooting startup issues by using the Windows RE, you should first try the Startup Repair option in the System Recovery Options dialog box. If the Startup Repair option does not resolve the problem, or if you must troubleshoot more steps manually, use the Bootrec.exe

  Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  If the problem persists, proceed to method 2.

  Method 2:

  Please follow these steps:

  1. Tool command prompt open in the mode of the Windows recovery environment .
  2. You will see X:\Sources
  3. Type chkdsk c:\ at the flashing prompt to launch the utility Chkdsk. replace c:\ with the letter of the drive that you want to run the Chkdsk utility. If the hard drive is d:\, then type that instead.
  4. After the "chkdsk c:\. "insert \f command to fix errors on the disk volume or the \r to recover bad sectors and then press ENTER.
  5. Restart the computer once the chkdsk command has completed.

  Note: Running chkdsk on the drive if bad sectors are found on the hard drive, it attempts to repair this sector, if all available on which data may be lost.

  For more information: Please refer to the section of the additional If you can not boot into Windows at all stages in the following link.

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-in/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Satellite L350D - crash after update BIOS?

  Hey all.

  Put windows XP on my Satellite L350D, worked well, has all the drivers etc. and works perfectly. Returned on the toshiba site and saw there is an update of the BIOS for it, then downloaded and says to install. To halfway through she turned off the laptop (thin power supply and had a full battery, so must have been updating).

  Now it will not boot up what so ever. The power light turns on but nothing else works.

  Im guessing that he wiped or corrupted BIOS, is there any fix for this, I can refer to toshiba or am I out of luck?

  Hello

  The failure of the Bios is one of the most painful problem in this forum. Too many discussions on the failure of the bios posted and typical response is to contact the ASP. Read this, may be useful for you

  http://www.theeldergeek.com/forum/index.php?showtopic=21209

• Satellite A300 crash at startup

  Got an A300 - 1J1 which, at normal startup, hangs at the busy thing Green Windows with a damaged screen bar.
  Starts in SafeMode Ok. I tried to check the disk, but hangs on reboot.

  F8 computer repair breaks down.
  Have tried resetting the bios, always falls down.

  There are 2 sticks of ram, I tried one at a time, not good, always accidents.
  Tried to boot to recovery DVD, fails at the same point, with corrupt again screen.
  Tried to boot the disk replacement windows vista crashes, restarts.

  Memtest cd of ubuntu, tests ok.

  Something else I can check?

  > Tried to boot to recovery DVD, fails at the same point, with corrupt again screen.
  > Tried to start on the hot spare vista windows, crashes, restarts.

  Above all it s a sign of hardware problem if the system can be installed using the recovery disk.

  What about a HARD disk check?
  Drive HARD a fitness test a freeware tool that is good to get the HARD drive checked to malfunction.

• Satellite L505 Windows 7 startup error screen

  I had a problem on my Satellite L505 a few weeks ago and it keeps occurring during each startup.
  Windows starts as usual, but instead of loading blue screen, where you can choose username and password to type I get only a black screen with nothing on it.

  I can't see anything, except for the mouse pointer, which works btw.
  When I press ENTER and type my password to Windows load my desktop and everything works well.
  This problem occurs when you start upward only, once I am connected and I want to switch users there is no this problem.

  I get a blue screen with stupid windows 7 graphics and images of all accounts, so there is no problem choose a user.
  Have you seen such a problem? Or is there someone who knows how to fix this?

  Thank you for your response.

  > When I hit ENTER and type my password Windows load my desktop and everything works fine.
  What password do you mean? Maybe you have defined a passoword BIOS?
  The laptop would not boot until the BIOS password has been set and then the operating system should start.

• After Effects crashing on startup Mac screen

  Hello

  My After Effects (11?) cs6 won't open on my imac 2011 21.5 mid. I have been released, she and the rest of the production premium suite for about a year now and have no problems with them so far.

  Everytime I open it it quickly flashes on the splash screen for an alert based on the effects. The alert says

  Last log message was: < 140735312810768 > < GPUManager > < 2 > Sniffer result Code: 3.

  I am running osx 10.9.2 and Adobe cs6.

  I have an AMD Radeon HD 6750 m 512 MB graphics card (I think, I don't really know a lot about the components of the computer) and have not had a problem running AE on it before.

  I tried unistalling and reinstalling, but the program still does not work. I did the update for them and they do not always work.

  I don't know what could cause this problem because it was working fine on Tuesday last week, but when I came in Wednesday and tried to open it this message apperared. I didn't run some updates for what anyone all night.

  Thank you

  Justin Steunenberg

  I was see a lot of people with this error message after they tried to install CUDA on their AMD graphics cards. If you have done this, what is the problem. CUDA is NVIDIA technology and it will really screw with a computer that is using an AMD card. Read this.

  Also, what version of CS6 are you running? 11.0.4? all 11.0.2?

• Satellite A660-155 freezes and needs of startup repair or does not start

  Hello, in the middle of the month of August, I bought a satellite a660-155, PSAW0E-00U00DEN S/N 5A214647K.
  It is registered under warranty until the Aug2011.
  After less than a week, it refused to start.
  I rang support and they recommended that I use the recovery discs to restore to factory condition. I did and spent the next 3 nights reload software and my backup disk data.

  Since then he refuses sometimes to start the hard drive with a relative error that it cannot rfind and then ask which drive to boot from. If I select the hard drive, it starts later. Sometimes when running he crashes and then restarts.

  Last night, after that it had not been used for a few days, I woke up he "sleep" mode. I logged on okay, but then the blue logo 'circly' comes on, spinning away happily, and nothing else (just for logging on the text). After 30 minutes, I pressed the power button to turn off because the cell phone was totally insensitive.
  On commissioning, I got a white screen for 30 minutes, then the Startup Repair option.
  I launched it and check start lasted almost an hour and an hour, then he said, trying to repair. After a few hours, I left and went to bed. This morning, he showed the guest of logon and connected properly, as if nothing had ever happened.

  I lost confidence in Toshiba laptops, (I am responsible for computer SCIENCE) and I've never seen this problem before on a so-called quality machine. I only ise it fot simple e-mail/internet/word documents.

  All I can conclude is that there is little material defective (hard drive) that stops responding intermittently.

  I sent support at 07:00 this morning, but have not had a response.

  Can you help me? This machine needs ideally replace or repair collection, back in working condition 100% reliable. Could someone please contact me to see where I go from here?
  Under the law of consumption, you have a duty to rectify my sad situation, that the flaw exists again.

  Thank you

  Thanks for the info!
  Seems to replace the HARD drive would solve!

• Satellite U - crashes during windows startup and restore cannot fix

  Most of the time, but not whenever the laptop hangs when starting windows.
  I get a blue screen, a dump file is created and then it restarts and gives me the ability to start windows normally or by using windows recovery. The windows recovery can not solve the problem.

  When I select the option to open windows normally everything works fine without any problems.

  If I restart the laptop, it will never block.
  The problem happens about 90% of the time when he walks.

  The problem started shortly after the purchase of the laptop in October.
  Initially, it came with Windows Vista and I was wondering if the problem was with Vista so steeple I've upgraded to Windows 7, but it always freezes on most start-ups. Otherwise, the laptop works very well and I'm happy with it.

  I suspect that the problem might be with Realtek, but pilots seem to be up to date. My internet security is trend micro.

  I was wondering if it might be a hardware problem, when this happens on Vista and windows 7.

  Someone has any ideas on what could be causing the laptop to crash at startup?

  Hello

  To be honest, if this problem occurs on the version of Vista and Windows 7 too that sounds like a hardware problem and it s time for an authorized service provider. Technicians can check your laptop fix it. It of fairly new, so I guess that it s still under warranty and the repair is free.

  Here, you can get the closest authorized service provider:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Goodbye :)

• Satellite L350D - 11K: black screen after downloading the Tempro updates

  Hi Forum,

  yesterday, I admitted Tempro download several updates on my satellite L350D - 11K.
  During the last update, it was an update of the firmware, the system crashed, and it no longer starts.

  After removing the battery, the system starts up, but now it has a black screen and I don't know what to do.
  Pressing any key F doesn't show any results and I have no recovery CD.

  Does anyone have an idea what to do?

  Thxxx in advance

  Hello

  I don't know why it happened, but if the short workaround solution posted by boarder will not help, so I see good opportunities to contact the ASP in your country for assistance.

  > During the last update, it was an update of the firmware, the system crashed, and it no longer starts.
  You're talking about the firmware update
  Maybe it was a BIOS update which failed and so the laptop will not start again
  As already said in this case that only the ASP technician could help you.

• Satellite L350D - 12 M crashed

  We brought this laptop satellite l350D - 12M, two days ago and already there are problems with it.
  What we have done because we used first downloaded a complete software for anti virus and updated and updates of windows etc.
  We have not stored any other content.
  We also made the recovery disc.

  It crashed the first day and since then, we have had problems on the system. We had to close in now the switch nothing did, it then restarted asking us how windows (safe mode, etc.), we then started in normal mode as we force need to reopen the content of the loss.

  But it never loads, we get so far as to enter our password accepts it, he remains in the post windows loads.
  So we tried safe mode, we get all the loading files displayed on the screen, but then that never finshes either.

  Help, please

  Oh I forgot to say that we have tried to reformat with the recovery discs, but can't seem to get their work is not our week lol

• Satellite C650-17Z: (new!) startup repair problem

  A few weeks ago, I used the Toshiba restore disk to fix my laptop to its original state. However, I have now faced a similar problem. I have shut down prematurely on startup 'Starting Windows' screen, which then caused the Startup Repair to launch when I rebooted my laptop a few hours later.

  What could be the results if the startup repair does not fix anything, since there is no set system restore points.

  Hello

  Wait a second time: your ad is a bit confusing

  This means every time on starting Windows screen, the computer stops and the next time you get message startup repair or what exactly?

  Hmm, what other programs and drivers that you installed after recover installation?

  You can start Windows in safe mode?

• Satellite A300 - startup repair does not work

  When I went to use the Startup Repair option in the advanced boot options at startup that he told me that the application cannot run and shut down the computer.

  I have a laptop Satellite A300-1OM.

  As far as I know, this option has nothing to do with Toshiba and this is the Microsoft function.

  What is the problem with your A300?

• Crash on startup Satellite L500-128

  Hello

  Sometimes, when I start my Satellite L500, I experience a blue screen that says that the laptop restarts automatically to avoid damaging the material.

  It's coming fast, so I can't read all the text in the message. After auto restarts, the startup is normal.

  Problem solver of Windows gives me an indication regarding these files.

  060210-18657 - 01.dmp
  SysData. XML
  WERInternalMetadata.xml

  That this has something to do with a bios update?

  Kind regards

  JW

  Hello

  Usually, you can also check the BSOD code in the Windows Event Viewer but also turn off automatic restart in case of system error.
  If you know the exact code of BSOD, you can search in the Internet and the Knowledge Base Microsoft for detailed explanations.

  These bluescreens means generally that there is a driver or a hardware problem.
  Also the Toshiba Recovery disk can help you identify the exact problem.

• Re: Satellite L650 stuck Startup Repair mode

  Hello

  I was asked to look at the Satellite L650 laptop for a friend because they could not get going.
  Not sure they did before me do yesterday, as far as I know, it's that they couldn't turn it on. I wanted to get into Safe Mode, but it went to the Startup Repair Mode and is stuck in this at all times.

  It is currently running Windows 7 Home Premium 64-bit.

  Have you tried from the DVD player, but it is up to the use of the hard drive, even tried running in my network, but without a bit of luck.

  It does not go to the repair step because it gives me the opportunity to enter a password.

  Someone at - it ideas how I can work around this problem, you can.

  HAL

  Hello

  I think you have only two options here:
  (1) you are going to use HARD drive recovery options
  (2) or you can start the recovery using the recovery disk

  For HARD drive recovery:
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

  Recovery disk:
  A friend created one in the past?
  Isn't it? Well, the new disc can be ordered here:
  http://backupmedia.Toshiba.EU/landing.aspx