Satellite L500 - all phones connect fail

Similar Questions

• Satellite L500-128 - slow connection to wireless network

  I have a problem with my Toshiba Satellite L500-128.

  After I installed Windows 7 Ultimate, my laptop is very very slow at startup. He hangs on to my wireless network connection or non - wireless (no matter whether I am connected to a cable). At this point, Windows has already started, but has not loaded al my applications yet. After 1.5 minutes or so when it is connected to my network (or has decided that he cannot connect because I'm not connected to a network), it continues and all is well.

  I already installed the latest network drivers. I have a Realtek PCIe FE Family Controller and an Intel Wifi Link 5100 AGN.

  Is there anyone who has this problem and fixed it?

  Hello

  I had a similar problem on Windows XP... The problem is that I used my router DHCP service it takes up to 1 minute I could use the laptop. I searched a bit here in the forum and I tried to use static IP addresses instead of DHCP from my router service: the problem has been resolved! :)

  Please try static IP addresses and update the firmware on your router!

• Satellite L500 will not connect WIFI (Windows 7)

  I bought a Satellite L500-01W002 running windows 7 for my son for Christmas and it will not connect via WLAN. I use a Linksys WAG54g router/modem. It connects fine via LAN and can see the wireless network, but does not connect. I use WAP-personal security with pre shared key and TKIP. I even turned off all security on the router and he left as an open connection, and it will always just connect.

  I have two Compaq running does not connect Vista connected first to the wireless network, but this thing just. I have uninstalled/updated / re installed device drivers and still nothing, it will be not just connect wirelessly.

  Please someone help me! I know you're out there!

  See you soon

  Hello

  Hmmm strange
  First of all make an update of the BIOS, that this should be done if a newer version is available and you have any questions.

  You said you did a update check WLan if you used the latest version of the driver
  Here you will find the latest WLan driver versions:
  http://APS2.toshiba-tro.de/WLAN/

  You can also check WLan card settings in Device Manager-> properties-> advanced settings WLan card.
  The same WLan channel must be used for the local network and router WLan card.
  Check if the MAC address filtering is not enabled in the settings of the router.

• Satellite L500 - lost wireless connection

  My Satellite L500 recently lost the wireless connection. I looked towards the top of the Realtek wireless device in Device Manager and it says that the device is functioning properly. I tried to use "ping 192.168.1.1" join the router, and I get "error Transmit - general failure."

  Any ideas?

  Hey Buddy,

  And now Windows recognize some WIFI networks at your fingertips? Your validation lost wireless connection isn't very useful

  You should try a WLAN driver update that you can download from the official page of Toshiba:
  http://APS2.toshiba-tro.de/WLAN/

  If you can't find or connect to WLAN networks deactivate in the Windows of the WLAN power save mode power profiles. You will need to set for maximum performance.

• Satellite L500 - no wireless connection

  Hello

  I bought 2 notebooks to Christmas for children, but cannot get them to connect to the wireless connection.

  I contacted Toshiba helpdesk and they want to contact me my internet provider.
  I'm a bit confused at this but as I have other laptops and they had no problem.

  I can see the connection, but it wont let me connect saying something like "(Impossible de se connecter àle réseau local sans fil-c-15) '? '."

  Laptops are L500 and I tried to update the driver but there seems to be a problem with that too.

  Any help would be greatly appreciated.

  Hello

  First of all it is important to know if your router is configured correctly.
  The WLan router must be configured with all the data from ISP (internet service provider).

  You said that other laptops can successfully connect to the Wlan router, so I guess that the router is configured properly.

  Now, you should check the WLan settings books;

  -WiFi must be enabled. To do this, you need to use the FN + F8 key combination. The small Wlan icon will appear.
  -After that, you have to choose; you will use own WLan configuration options of Windows or you must use a third-party tool 3rd as utility of Atheros Wlan or Intel Proset wireless wifi connection utility.
  -WLan parameters must contain the right SSID (name of the Wlan), the right encryption and password.
  -In the WLan connection TCP/IP Protocol, IP and DNS settings must be defined to automatically get
  -The MAC address filtering should be disabled in the router configuration if you don t want to insert the available wireless network cards unique MAC addresses

• Satellite Pro C870 - Internet connection fails after a fashion 'sleep'

  SATELLITE PRO C870-19N. Internet through an ethernet cable. Windows 8.1

  Hello

  My problem:
  I turn on the computer. It recognizes the connection internet (Ethernet cable). I work without any problem... and I left (a few minutes)... I come back. Black screen, computer sleeps. I wake it up - I have to enter my password - and he says there is no internet connection... I have to stop it and restart it.

  Can you help me?

  Thank you.

  This problem occurs using only the LAN connection or have you noticed the same situation using Wireless LAN?

  In case this happens only by using the LAN connection, I recommend you to check if you can update the LAN driver.

  You can also right click on the network icon (in the taskbar) and could choose to diagnose and repair.

• Satellite L500-19Z - system restore fails

  I have a laptop running Windows 7 64 bit L500-19Z. A number of occasions, I tried to run the system restore but have so far failed. Any restore point that I select the system restore seems to work (initialization etc.), but when it restarts I get the message telling me that it failed with the proposal that he could have failed because of an antivirus running.

  I use Zone Alarm, but have turned it off when you try to restore but it makes no difference. Yesterday, I made a mistake one inadvertently lost my wireless network adapter. There is a restore point that I could use to recover, but as I said above it still fails. At least I can get the system restore works, it seems I have to re - install Windows which I am reluctant to do.

  Can someone help, please?

  Hi anicholles,

  In your case I would uninstall Zone Alarm. I didn t make good experience with this program and my firewall view integrated Windows is much better and doesn't make any problem for there part of the operating system.

  Also uninstall or disable the AntiVirus software before you start the system restore.

  To be honest I don t think you have a lot of options if it doesn t work. You can ask in the Forum Microsoft if it s a problem well-known but faster way may be reinstall Windows Toshiba Recovery disk I think ;)

• Cannot turn on by Satellite L500-14Z - BIOS Upate failed

  Hello

  I downloaded the latest BIOS update for my laptop.
  The update started, but after a while my windows 7 has been frezzed I think (do not answer on moving the mouse), and after a few minutes it powered by off.e

  Now I can not power on my laptop.
  I have more than 1 year warranty.

  What can I do now? Thank you and sorry for my bad language.

  Hello

  This s pity companion
  In your case there is no things to do
  You need a help of a technician of ASP.
  The ROM needs to be flashed again using BIOS crisis disk

  Good luck

• Satellite L500-13W - does not load correctly

  HI - he's two months bought new Satellite L500 - all wells and then last week began to have problems charging.

  As usual, I allowed the battery to run down to approximately 10% of capacity before plugging the power cable. While work noticed immediately that the load would stop for about 2 seconds and then reconnect. After a few minutes, he would do it again.
  It is the battery, but it is now flicking on and off quite frequently - 5 to 10 times per minute. Besides being boring as the screen dims, I am sure that this can only get worse on a regular basis.

  I tried another adapter - my son also has a Satellite, and the problem is still there, this isn't a problem with the cable.
  I would be very grateful if anyone has any suggestions. I can take it back to the shop where I bought it, but it is about 1 hour drive, and I need my computer every day, if I can't leave with them for a while, before driving another hour and return to perceive.

  Hi merriman.
  hope that is not related to a hardware failure...

  Try the following:
  -machine boot without a network, only battery
  -while booting press F8 and choose no matter what option, the screen will remain (better is to do it with a startup back disc but..)
  -Leave the empty battery
  wait about an hour and go through the same procedure
  This period of time should be much shorter!
  -Plug the and leave it 24 hours without using the machine, do not turn on battery charge (I think that 12: 00 will also be long enough)
  After this execution machine without power until the system requires 'more power'
  avoid loading in short cycles, each charge cycle decreases the capacity of the battery
  allways ac-power: each 2 minutes battery is checked and reloaded, that means in a year, the charge cycles are lost...

• 12 c em connection failed.

  All users connection failed. I have connection the use of success of the same repository user name and password database, but failed to connect on em.

  eMoms.TRC shows that:

  2015-03-19 15:42:44, 173 [ExecuteThread [ASSET]: '21' for queue: "(self-adjusting) weblogic.kernel.Default"] WARN auth. EMRepLoginFilter doFilter.450 - InvalidEMUserException taken in EMRepLoginFilter: failed to connect using the repository for the user authentication: SYSMAN

  oracle.sysman.emSDK.sec.auth.InvalidEMUserException: failed to connect using the repository for the user authentication: SYSMAN

  at oracle.sysman.emSDK.sec.auth.EMLoginService._performLogin(EMLoginService.java:1289)

  at oracle.sysman.emSDK.sec.auth.EMLoginService._doEMLogin(EMLoginService.java:710)

  at oracle.sysman.emSDK.sec.auth.EMLoginService.doEMLogin(EMLoginService.java:640)

  at oracle.sysman.emSDK.sec.auth.EMLoginService.doLogin(EMLoginService.java:215)

  at oracle.sysman.emSDK.sec.auth.EMLoginService.doLogin(EMLoginService.java:261)

  at oracle.sysman.emSDK.sec.auth.EMLoginService.doLogin(EMLoginService.java:268)

  at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:427)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.sysman.eml.app.MBeanServerConnFilter.doFilter (MBeanServerConnFilter.java:43)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:561)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.adfinternal.view.faces.caching.filter.AdfFacesCachingFilter.doFilter(AdfFacesCachingFilter.java:137)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)

  at java.security.AccessController.doPrivileged (Native Method)

  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)

  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)

  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)

  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)

  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3730)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3696)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)

  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)

  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Hello.

  + Has been the changed sysman password recently?

  + Ensure job_queue_processes parameter is set to non-zero, ideally, it should be a value of 1000

  If the value is 0 or low then proceed as follows

  + stop the SGD

  OMS_HOME/bin emctl stop who-all

  + Connection to the database of rest as a SYSDBA user and set the job_queue_processes for a value of 1000:

  SQL > ALTER SYSTEM SET job_queue_processes = 1000 SCOPE = BOTH SID ='* ';

  + Start the SGD

  OMS_HOME/bin emctl start SGD

  + Check the connection to the console.

  Kind regards

  Rahul

• Satellite L500 connection ok but no Internet after upgrade to Windows 7

  Hello
  I just upgraded my Satellite L500 to Windows 7 everything is fine except that I have no internet access. I have a strong connection to my wireless home network and can connect to other wireless devices to the network ok. I also tried to connect using cable, but I have the same problem - connected but no internet access.

  I ran ConfigFree utility and it does not find a problem. I ran the troubleshooter in Windows and it is unable to solve the problem but tells me that the wireless network doesn't have a valid IP configuration.

  I have reset the modem and the router, without effect.

  I checked all the drivers and BIOS are the latest versions.

  I tried to enter an IP address manually rather than get an automatically. Still no luck.

  Any ideas I can try? I hope someone can help.
  Thank you.

  Hello

  For me it sounds like that the problem is the router, and not the laptop because you wrote that with cable connected even happens on WLAN connection.

  If you go into the menu of the router, what is the status of the internet connection? Your router has a connection or not?

• Satellite L500 - failed to initialize webcam

  Webcam always worked... all of a sudden, it will not open and I get the message:
  + "failed to initialize the webcam." Please check your device and restart the application or computer. » +

  The device is what is installed on this Satellite L500 laptop.

  No indication on how I can check (diagnose) the camera

  Can someone tell me how I can check the camera, or its driver, or something else to make it work again?

  Your contribution is appreciated.

  PS: there is no indication below all if I'm going to be notified of responses. If moderators can report what it is a small consideration for those of us who are not technically minded.

  Hello

  I think you should first update / reinstall the driver for the webcam / software.
  You will get the webcam software / driver for Win 7 of the Toshiba UE driver page:
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp

  before you would be stars the webcam driver installation, I recommend you to uninstall the pre-installed software (Control Panel-> programs and features)
  Then restart the laptop and install the new downloaded drivers

• Satellite L500 - 19 X - HDMI to TV connection

  I am a beginner with it, wanting to watch iplayer on a larger screen. I have connected a Satellite L500-19 X theToshiba VGA cable to the TV - fine image, no sound, but I realize that an audio cable is required as well.

  I decided to try a connection HDMI cable instead, but I can't get it to work. The FN/F5 keys have four possibilities. I tried all the and had to do a restore of the system at any given time, because the PC kept close when I plugged the HDMI cable with one of the four choices.

  The TV (Finally, I tried two Sonys) is set to PC, but it does not recognize the device. Is - this drivers?

  Hello

  > The TV is set to PC, but it does not recognize the device
  Well, usually it s according to the TV but normally and on my TV, PC connection means the TV VGA input.

  If you use an HDMI cable, you have to select the HDMI port on your TV instead of PC port.

• Satellite L500-1WG WLAN WNAP A-Link connection gives 'blue screen '.

  Hello!

  OS: Windows 7 / 64-bit.

  I try to connect my Satellite L500 to WNAP A-Link 802.11n WLAN AP 3 G ROUTER via WIFI (Realtek RTL8191SE). Connection is established, but after a few seconds, I'm going to 'blue screen' and restart the laptop.

  A-Link WIFI connection works very well with my Nokia X 6 phone (S60).

  Any help?

  Sitiper

  Hello

  BSOD code, you get exactly?

  Have you tried to update the driver WLAN? You can find the latest version on the Toshiba WLAN Portal:
  http://APS2.toshiba-tro.de/WLAN/

• I can't connect my Satellite L500 WLAN

  Laptop:
  Toshiba Satellite L500, windows 7 Home premium

  Problem:
  Something wrong with the wireless adapter, where it works very well for 30 minutes after the start of the computer, but all of a sudden, it is is turned off by itself and I couldn't allow it without having to restart the system. I tried to adjust the properties of power management of the adapter wireless, but for some reason that I could not reach it (tab power management in the adapter properties window is not there!)

  The problem is not because of the router because my other devices has no problem with the WiFi connection.

  Help, please

  Have you noticed this problem with the power supply batteries, power supply or using two of them?