Satellite M30-344: Mat * un UJDA750-> DMA Mode?

Similar Questions

• How to change the cooler on Satellite M30-344?

  Hello

  IA´m lucky enough with my Satellite M30 - 344, but 2 months the cooler starts to become stronger every day. Is it possible to change the cooler on mine and how expansive is the original cooler? Do you know anything as a tutorial for the change process?

  Originally from 2 256 parts MB of Ram is installed. Now ia´m think about a bigger total RAM. As far I know are only 2 slots for RAM, or I'm wrong. Is it possible to install two 1 GB RAM pieces?

  Thank you very much for your help!

  Hello

  The replacement of internal devices is not easy and a little risky.
  I wouldn't recommend replacing the cooling module yourself.
  You might damage it something on the map and as you know the motherboard is costly parts of the laptop. The manuals are not published because these documents are only for technicians and service partners.
  So I think you should ask a service partner to help him because these guys have more experience in these procedures.

  I found a site online with the memory modules for Satellite M30 344
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=6958&ft=m&St=3

  It is said that it of possible to upgrade memory to 2 GB max. That's why I think that it of possible to use module 2 x 1024 MB.

• What kind of RAM I should buy to Satellite M30 - 344?

  Hello

  I want to upgrade the ram in my satellite m30-344. Should what kind of ram I buy? I don't know, but I think that the "PA3312U - 2M 51-512 MB memory pc2700 sodimm (333 mhz)' is the right? is it at?

  Thanks in advance

  Greetings
  s. haug

  Hi Steffen,

  The part number I found for a 512 MB module for your laptop is PA3312U - 1 M 51

  HTH

• Satellite M30-344 would not start

  Hello!

  I have a Toshiba Satellite M30-344.
  I have use Notepad for several weeks. Now, whenever I start the laptop computer, an error message appears: "0203: failure IDE #2 - you want to start the installation.
  Since the last use, I has not changed anything on the configuration.
  The only problem there is that I forgot to turn it off, and he continued to run under my table for more than 2 weeks.

  Is there a way to fix this?

  Thank you for your help.

  Greetings from the Germany!

  Hello

  .. Oh dear, you're not kidding? You forgot to turn it off and kept under a table? Man, that s REALLY weird. :)

  And now, to help you with your problem:
  IDE #2 means the DVD player, if you have a few options to bring your machine to life, because your DVD player might be defective.
  First of all, try to enter the BIOS and do everything by default. If you didn t get results, then remove the disc by unscrewing the screw under the drive and gently pulling the drive out
  THA machine. Alternatively, after you unscrewed, gently open the reader and then pulling it by the internal transport of the reader.

  In case of doubt, how or afraid to damage something, then bring your machine to a local ASP and they will help you with your problem.
  So, I think, your drive is probably faulty.

  Welcome them

  P.S.: And try to remember next time when what you keep under your table such as notebooks, animals, humans, gremlins... ;)

  Beautiful weekened

• Satellite M30-344-CPU cooling fan noise

  Hello world...
  I have a satellite m30 344... it is 1 1/2 year... and now, I had a problem with my cpu... fan is making a horrible noise... and the air flow is not good...

  I'm looking for how clean my fan... I removed the keyboard and I also took into consideration... but could not find any access to the cpu fan...

  can someone make a suggestion how to clean the fan to the processor in my laptop?

  THX
  ascorbin

  Post edited by: ascorbin

  Hello

  In my opinion, it's a very bad idea to open Notepad on your own. As you know that books are very sensitive units and if you have no experience you shouldn't do this. I guess that the guarantee is valid for two years and open Notepad, you can void your warranty.

  I'm sorry, but I put t see any means cleaning without dismantling because there is no cooling grilles of ventilation and air in the lower corner. On some laptops from Toshiba, the of cold air is visible and the cleaning procedure is much easier.
  Before doing something wrong contact partner in your country. It is also possible that there is a problem with the CPU fan and it can be exchanged.

  Good bye

  Post edited by: Barrie

• Satellite M30 - 344 - USB 2.0 no longer works

  Hello

  Since 2004, I have a Satellite M30-344. Some time ago, I changed my system from XP home to XP pro and my USB 2.0 no longer works since. I need to use XP pro because XP home does ' t run some CAD software that I use. Can I do about this problem? I could not find the USB drivers in the Toshiba downloads.

  See you soon,.

  Kat

  I agree with Sascha.
  But you also need to install SP2!

  This is necessary and important. I put t know if you already use the SP2 or not, but it must be installed on your laptop to get the USB ports work!

• Need new optical drive for my Satellite M30-344?

  Hello

  the original optical drive in my laptop no longer works.

  So I want to change it (CD - RW / DVD-ROM) in a new with DVD/CD-RW.
  I read, that the optical drive CLS or master/slave adjustment und normally with software, I can change that.

  Use adjustments CLS or master/slave and that drive a market adapts the SM30-344?

  THX and sry for my English

  Greetings

  BOA

  Portable players are always on the CSEL parameters. There are no jumpers to master or slave.
  But it true s not all slim drives are compatible with the Satellite M30 laptop.

  I found these compatible discs:

  Drive_ _Cd-RW/DVD-ROM
  * Matu * a * G8CC0001C210

  _DVD-R/RW_
  * Toshiba * SD-R6112

  Drive_ _DVD-Multi (DVD-RAM/R/RW, CD-R/RW)
  * TEAC * G8CC00013210
  * Matsu * a * G8CC00019210

  You can also contact the ASP in your country to ensure the compatibility of disks

• Upgrade memory on Satellite M30 344

  Hello
  I upgraded my memory from 2 x 256 MB to 2 x 512 MB, but nothing works. I bought the ram modules compatible to pa3312u - 1 m 151.
  This system does not start, nothing happens. After reinstalling the old module, the system boots normally.
  What can I do?

  Hello

  If the unit doesn't start correctly it is probably because the new modules are not compatible with this device.
  According to the specification you need PC2100 module of RAM of 512 MB (PA3164U - 1 M 51). Please bring your back and buy PA3164U - 1 M 51. Those who are tested and they should work fine.

  Good luck!

• Satellite M30-107: Mat * a UJ - 820 s read burn CDs

  Someone knows why. I tried different burning programs made no difference. Works on any pc/laptop on the planet except this laptop! It shows up as a blank cd!

  any ideas?
  Thank you

  Hello

  On this path, it is not easy to talk a lot. You have the same problem with the original audio CD?

  By the way: what kind of data is burned CD (just the film data, audio CD),?

• Where to buy the upgrade of RAM for my Satellite M30-344?

  Hello

  I want to upgrade my RAM from 512 MB to 2 GB memory. After reading in the nets, he would say the PC 2700 DDR SODIMM (33135 PA-2MIG) would correspond to my laptop. Anyone know where to buy it? could not find it on ebay and other suppliers of portable... Is it too old and trade off already?

  See you soon,.

  Kat

  Where to buy?

  Hey buddy don't you hear something on the shops online, amazon, ebay, etc.  ;)

  If you know what Rams are compatible, then simply google for some nice offers.

  You can also buy it at a computer retailer in the city center

  As you can see, you have more options.

  Good bye

• Satellite A100 - Questions about slow start, not in the DMA mode CD drivers

  Hi all

  as you can see I have 3 questions:

  1. my Satellite A100-153 starts very slowly (current running avira antivir and sunbelt pfw only like on my other laptop which is older than this one, but not slow start)-anyone has any idea why (I would be very gratefull because I don't have reinstall win and all my stuff)?

  2 Nero tells me that my CD is not running in DMA mode - where can I check and fix this?

  3. drivers - am I forced the drivers supported on this site or can I use the drivers directly from the manufacturer (ATI for my graphics card, Intel for my chipset realtek for my sound and so on)?

  Help is welcome!

  Hello

  For me, it will be interesting to know what operating system you are using. Anyway, I'll try to give my short opinion on your questions:

  -many other factors may be responsible for slow start. It is usually the OS configuration. I'll try to find an interesting article, how to make faster starting and I will post it here for you.

  --entrer enter in the device IDE ATA/ATAPI controllers Manager, enter the properties for secondary IDE chanel and open the Advanced Settings tab. Is under transfer mode DMA if available? If this isn't the case, set it to please and after reboot check if the problem persists. DMA if available is usually defined as a default value.

  -In general, you can use it but it is well known that manufacturers of graphics card don't support mobile graphics cards and laptop manufacturers are responsible for.

  I recommend you to use the Toshiba drivers only. All of these drivers are put to the test.

  Good bye

• Satellite Pro M30 - 344 recovery disk availability?

  Toshiba dear owners,

  Someone has in stock / on sale... The recovery disk
  the value of the M30 344 in English. My game is only
  in German. (Win XP Home / Pro)

  Thanks in advance,
  Antti

  Hello

  As Feliks said installing WXP Microsoft version full English and use the drivers from the download page. You can find them in all languages.

• Satellite M30: Mat * a UJ - 820 s read DVD but not CD

  I have a Toshiba Satellite M30 and I have problems with my carpet * CD/DVD UJ - 820 s player.

  I had to do a full restore due to a virus problem, and now the reader can not read any CDs.
  I can read movies DVD and load/use of programs to DVD but when I try to use any media CD (load programs, play music CD, burned CD playback) it gives me the error "D:\ is not accessible. Incorrect function. »

  I looked on the forums and have tried to remove the drive from the hardware Manager, tried to change control of the IDE and have downloaded the latest orders that I could find.

  Any help please!

  Hello

  tried a Firmwareupdate for the reader? At this address you can get the latest update if it is not already:

  http://Forum.RPC1.org/dl_firmware.php?category=15&manufactor=18

  So if the problem persists, then your only option would be to contact a local service partner. They will probably check your disk for physical errors.

  Welcome them

• Satellite L300-01:00 - DVD in PIO mode, cannot activate DMA mode

  Hello everyone,

  Recently, I have a laptop Toshiba L300-01:00 and I have a little problem with the DVD-ROM drive. Maybe some of you can help me with their knowledge. So here's the problem:
  The DVD runs very slow, I guess in the PIO mode. I can't switch to DMA mode because there is no options.

  On ' Device Manager / IDE ATA/ATAPI controllers ' options are a single - 'Intel(r) ICH9M-E/M SATA AHCI Controller' where you cannot activate DMA mode.

  I have WinXP SP2, SATA and all the other drivers installed.

  So my question is, how can I enable the DMA mode for the DVD player?

  Thank you very much.

  Hello

  I have a laptop with installed U400 XP OS and I the primary IDE channel entry into the IDE ATA/ATAPI controllers.

  Main channel that you can switch to the PIO or DMA is available in IE.

  Now the question is; How do you install XP on your laptop?
  Usually, the SATA mode must be set to AHCI in the BIOS, and you must include the SATA drivers to install Win XP on this laptop.

  Then a primary IDE channel should if poster in devices and the PIO or DMA settings manager should be there.

• Satellite M30, partitioning

  After that I got some error messages and viruses so I had to format my laptop the Satellite M30.
  I used the recovery CD Toshiba 2 and the only option for me was Option 1 Option 2 is reserved for specialists, and I'm not familiar with all the terms it. In any case, the formatting not only formatait the C:\ but D:\ thus merged the formerly 2 x 30 GB in a single C:\ partition, I had no option to stop this.
  How can I split my C:\ drive again into 2 partitions of the same size?

  Sorry, but the only way with the delivered software on a M30 to create partitions is the expert mode.
  As far as I know.

  But I have a proposal.

  Tomorrow I'll do a recovery on my M30 will inform you as soon as possible.

  Good bye