Satellite P L50-B-1 1 - mSATA?

Similar Questions

• Satellite Pro L50 - load capacity of low battery

  Satellite Pro L50, I got a warning box will appear from the Toshiba PC Health Monitor, who said

  "Your battery charge ability is relatively poor.
  After a period of time, the battery will lose its ability to perform in the max capacity & will need to be replaced. This is normal for the batteries. Click the help button for more information on the State of charge 'poor'. »

  By clicking on the help button, said the State of the battery to a third load capacity.

  Is this an indication that I need a new battery?
  The laptop is only 4 months old & I have a few concerns. Comments appreciated

  Best regards, mrpringle.

  If the laptop is 4 months old I recommend you to contact your dealer or directly the closest Toshiba sevice provider and explain the situation.

  You should clarify this with them and maybe you will get new battery free.

  Addresses and phone numbers, you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/
  Don't wait. Call the Toshiba service as soon as possible.

• Satellite Pro L50-B05D - need driver for Windows 7 WLan

  Hello

  I bought a * Toshiba Satellite Pro model L50-B05D psktaa - 001 05d *.
  I needed a new machine because I was starting a new job the next day.

  During an installation out of office 2013 the machine in one of its discounts to zero was a catastrophic error... and has refused any attempt of recovery. around 7:00 in the night...

  I needed an operational machine for work... the next day

  I took out my Windows 7 and proceeded to reconfigure the computer and install Windows 7... Machine is operational, BUT I can't get the Wireless LAN works... for the model I there doesn't seem to be a wireless lan driver...

  The functions of network card BUT not wireless LAN...

  Please can someone tell what is the right driver LAN wireless to the machine...

  Thank you

  Harpoon2222

  Hello

  Your laptop satellite L50-B05D belongs to the PSKTAA series and this series was only released in Australia.

  But the similar series of portable Satellite L50 - B PSKTAE is released in Europe.
  The drivers of the EU Toshiba driver page should be compatible.

  Visit this page:
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp
  Choose here.
  Laptop
  Satellite
  Satellite L
  L50 - B satellite
  PSKTAE
  Win 7 64 bit

  Note: there are three different Wlan drivers: Intel, Broadcom, Atheros

• USB 3.0 does not work on my Satellite Pro L50

  Hello boffins.

  I have a problem with the driver for the Intel USB 3.0 eXtensible host controller on my L50 (running Win7 64 bit).

  I recently took my L50 Pro Satelite (PSKK3A-001001) to the repair shop because the blue ports were not running at speeds of USB 3.0 when I plugged a USB 3.0 compatible device (a WD 1 TB HARD drive). When I looked in the device tab "Display connection" Manager, HARD drive showed as connected to the ordinary C220 USB hub which is for USB.2.0. USB 3.0 eXtensible Host Controller has been inactive.

  The technician in the repair shop said:

  + I tested your machine with a new installation of Windows 8 and have been able to achieve speeds to 180 MB/s of my FlashDrive USB 3.0 without problem, which indicates that it is a matter of faulty software. We can improve your Windows 8 machine free of charge if you prefer, but I'm unable to solve the problem in Windows 7. From what I can tell, and what you have experienced, no published 3.0 for Windows 7 USB drivers can recognize the 3 USB ports installed as a USB 3 connection. If you are wanting to stick with Windows 7, I can't guarantee that you will reach speeds of USB 3.0 by using these ports. +

  It's not really good enough, Toshiba. Now, I bought this machine specifically with pre-installed Win7 (because Win8 is rubbish) that I wanted a machine Win7, including USB 3.0 ports. This machine has been published as such, having Win7 installed with 2 x USB 3.0 ports and 1 x USB 2.0. This is confirmed by the page of the specifications of Toshiba here: [http://www.mytoshiba.co.nz/support/computers/satellite/pro/l50/pskk3a-001001/specifications].

  So, my question is this: why this machine is the drivers needed to run it as advertised (i.e. under Win7 with 2 ports USB 3.0 x and 1 x USB 2.0) and if there are drivers for this device available, where are they? I tried and tried the repairman (I guess) but I'm still without a driver to run my USB 3.0 clocked ports. I tried age for the files to be transferred between pending devices.

  Maybe someone can help me find a driver that works or Toshiba will clean up their act and produce a.

  But you have installed Intel USB3.0 driver 2.0.0.102 version, right?

• Satellite Pro L50 - B - unable to connect at 5 GHz Wi - Fi

  Hello

  I just bought a new Satellite Pro L50 - B and it is unable to connect to the wifi of my company 5 GHz network. It connects well to the 2.4 GHz network, but poor performance on network thaat there.

  Is it possible to get the L50 - B to work in the 5 GHz range?

  Thank you

  Martin

  Frequency of 5 GHz is supported by 802.11 A and 802.11 N
  But if the WLan module is not compatible 802.11 A, then the standard 802.11 N will operate at 2.4 Ghz

  The question is: what are the standards WLan are supported by the integrated WLan module?

  Which module WLan is integrated?

• Satellite P L50-B-1 1 - wireless and video questions

  Hello

  Yesterday I bought a Satellite P L50-B-1 1. It came with Windows 8.1 preload. I shot this Windows 7 Ultimate.

  However, I can not the wireless to work. I downloaded the drivers from the site of Toshiba, but so far without success.

  The laptop has an AMD Radeon R7 M260 2 MB of graphics card in it, but I can't get that to work either. Yet once I downloaded the latest drivers from the AMD website, but no luck!

  Does anyone have any suggestions?

  Mike

  Hi again,

  Problem solved!

  I did a search on ther two elements criminalised and discovered that the wireless card is an Intel Dual Band Wireless-AC 3160. After google, I got a set of drivers and a right form of installation package Intel sorted the problem.

  Once I got the laptop online, he then install updates 133! I guess one of those sorted the problem of videocard because I have now no yellow triangles on the Device Manager window :)

  All's well that ends well.

  Mike

• A Satellite L50-C-1ZG free mSATA?

  Hello

  L50-C-1ZG has free mSATA add an additional SSD?
  And if not, what model having this prepared you will recommend?

  Kind regards
  Roman

  Wow, this forum is really something, Toshiba.
  Test program with 30 days, I can give back the laptop.
  Appreciate your support dudes.

• Satellite Pro L50 - A does not illuminate

  Hello

  I took a few steps on this forum but no luck so far...

  My L50 - A Satellite Pro was working fine up until yesterday, but today, only it just won't turn on. A small orange led light appears when I connect to the power cable...

  That's what I've done so far-

  1 power cable removed
  2. using a needle, pressed force shutdown (stop) at the bottom for 10-12 seconds
  3. then I pressed the start/power button on the front for 60 to 70 seconds
  4. I have connected the feeder and then to new press button start / stop at the front for 60 to 70 seconds

  Yet the laptop does not start!

  any suggestions?

  Thank you

  Hmmmmmm... It is not easy to say what the problem is here.
  Have you used your computer laptop usual ot, you might update something?
  In general, there are steps that you did which could be responsible for your problem?

• Satellite A-L50-19N - improved Audio Toshiba fails to execute - 0 x 05162010

  Hello

  If I try to run the development of Toshiba utility, it gives this error message and exits:
  Audio driver not installed correctly. Install the audio driver.
  Error: 0 x 05162010

  Please for the resolution.
  My audio driver is IDT Audio driver 6.10.6491.0 24 / 09 / 2013. [This one | http://cdgenp01.csd.toshiba.com/content/support/downloads/tca0104800e.exe]

  Seems to be the latest version of the driver for my sound card for Toshiba Download Center Driver.

  There are however other audio drivers, do not know if I use the right one.
  AIDA64 reported but my onboard audio chip as [IDT | http://content.screencast.com/users/uu1qKRgw/folders/Default/media/6b5c90dc-2d45-4151-930e-145311937ed4/01.22.2014-09.png]

  IDT High Definition Audio Codec "this device is working properly", said the Manager of Windows device (no warning about it).

  Then what is problem Audio Enhancement have?

  Hello

  L50-A-19N satellite belongs to the series of PSKK6E.
  I have no idea what system you use, but the driver Toshiba UE page provides different audio drivers for this series: Realtek sound driver and driver audio Toshiba.

  But I couldn't find the driver (IDT Audio driver 6.10.6491.0 24 / 09 / 2013) which you published in the message. So I guess that you have installed the wrong driver.

  Page of the Toshiba UE driver once more for the pilot of his right!

• Satellite A-L50-M6S - question SSD

  Recently purchased by Satellite L50-A-M6S computer laptop. It worked well on standard included HDD.
  I decided to replace the HDD with SSD (Intel SSD 520 Series), previously used in an another Toshiba laptop.

  After the replacement, in the first instance, I can't boot from SSD, proved that the SSD is not detected correctly when the SATA in the BIOS settings are defined in performance, ok, Perfomance mode cut mode, but it's strange in my opinion.

  Then during work, I decided to take a walk and closed laptop cover (configured to display mode "Eve" near the coverage). After I have opened and BSOD occurred. Later that day, same sequence of actions - an another BSOD.

  I analyzed superficially minidumps windows:
  1 dump:

  KERNEL_DATA_INPAGE_ERROR (7A)
  BUGCHECK_STR: 0x7a_c00000c0 (STATUS_DEVICE_DOES_NOT_EXIST)
  DEFAULT_BUCKET_ID: CODE_CORRUPTION

  ...
  MODULE_NAME: memory_corruption
  Nom_image: memory_corruption
  FOLLOWUP_NAME: memory_corruption
  DEBUG_FLR_IMAGE_TIMESTAMP: 0
  MEMORY_CORRUPTOR: LARGE_4096
  FAILURE_BUCKET_ID: X64_MEMORY_CORRUPTION_LARGE_4096
  BUCKET_ID: X64_MEMORY_CORRUPTION_LARGE_4096

  2nd dump:
  KERNEL_DATA_INPAGE_ERROR (7A)

  ERROR_CODE: (NTSTATUS) 0XC000000E
  DISK_HARDWARE_ERROR: Error occurred with disc material
  BUGCHECK_STR: 0x7a_c000000e (required device is Inaccessible)

  ...
  even

  So, as you can see there is problem with SSD. I tried to test this on another computer portable Portfolio, not such a problem.
  Just in case where tested PC memory with memtest86 - no problems found. BIOS update - nothing has changed.

  Any suggestions?

  Thank you.

  P.S. Minidumps - http://www.sendspace.com/file/fff2qg. Are there developers of Toshiba or someone who can redirect this question to them?

  At first, I must say that it is user forum so I don't think someone developers Toshiba can get this question and contact you directly.
  I also use the SSD (non-Toshiba one) with my camera and to be honest, it's a little strange to me to have this kind of problems.

  Can you please tell us which OS you have installed on it? Have you installed original recovery image that you got with your laptop?

• Satellite Pro L50 - a: how to replace the memory, HARD drive and battery

  I just uploaded 2 new video from Youtube on the L50 - A. Satellite Pro

  The first is a tear down showing how to replace the memory, hard drive and battery (you can also clean the fan if it detects overheating).

  http://www.YouTube.com/watch?v=IG0lW7t92bI

  BTW why they made it so difficult to get just to the battery in this model?

  WARNING - proceed at your own risk and don't forget static precautions!

  Hope they help and if you have any questions let me know.

  + The message was edited: link has been removed ad channel may not +.

  Thanks for these videos. It may be useful to replace the memory, but I think that the owners of the laptop should not open the case. This may void the warranty.
  Be careful about this.

• Satellite Pro L50 does not start with 8 GB

  I have a brand new L50 Pro of Satellite (PSKK3A-001001)

  Config of RAM is default of 1 x 4 GB memory DDR3 12800 1 use slot 1 slot free
  I removed 4GB and install 1 DDR3L 12800 8 GB but it does not start.
  The form of State capacity 16 GB so with 2 slots logically, that means 2 x 8 GB cards.
  He also said DDRL, which I assume is the correct type.

  The 4 GB mark was Hynix and the 8 GB is Apacer.
  Anyone have a resolution on this or know what the problem is?

  On this forum you can find many threads where people describe similar problems. In most cases the problem is compatibility modules, especially if Ram needs to be upgraded with modules produced by different manufacturers.

  According to the specifications of the laptop you need DDR3L memory (1600 Mhz).
  Talk with your dealer and ask if there's Kingston compatibility module. Kingston offers high quality and 100% compatible memory modules.

• Satellite Pro L50 - A - does not function keys

  Hello

  I just bought the L50, but the function button did not work. I tried to reboot, reinstall the utilities, but it did not help.

  I couldn't find the "restart flash card" also. Can anyone help?

  Thank you!

  > I just bought the L50, but the function button didn't work

  What system do you use or what system was preinstalled on this laptop?
  As far as I know a few L50 - A Satellite Pro have been pre-installed with Win 7 and Win 8 DVD could be found in the package

  The fact is that Win 7 and Win 8 are two different systems and different Toshiba tools are needed to get the FN button work.

  Your comments would be appreciated.

• Satellite A-L50-18r - WiFi 802.11n standard is not available

  I have a Toshiba Satellite L50-A-18r with a Qualcomm Atheros AR956x Wireless Network Adapter wich suports wifi 802.11 b/g/n, but no more than 15 to 20 Mbps to 50 Mbps, I can't send my router.

  Also, in advanced options for the wireless adapter there are 802. 11B only option.

  How can I activate 802.11n to get faster.

  What operating system do you use?

  Have you tried to update the driver WLan?

• Satellite A-L50-1DF - sound distortion using HDMI connection

  Hi all

  Recently, I bought a new laptop, a Toshiba Satellite L50-A-1DF.

  From the beginning, I experienced problems with the HDMI connection.
  When I connect my laptop to another monitor via HDMI more often than not, the sound is tinny and slightly distorted.

  When I unplug the cable and put it in a few times, most of the time solved the problem.
  I used different HDMI cables and different monitors with the same effect.

  Other laptops work fine with these cables and monitors.
  I reinstalled the drivers to display without a bit of luck and will eventually be sent my laptop in for repair.

  Unfortunately, the problem was not found when they looked at it and I'll it back without a repair.

  I have no idea what could be the problem, because it is not found by the repair team.
  The customer service is unfortunately reluctant to me more help.

  Can anyone think an explanation to this problem?

  Thank you very much in advance for your comments!

  Kind regards
  Natasja

  > I have no idea what could be the problem, because it is not found by the repair team.

  This means that the technician did not notice the sound distortion.
  I think that it s very difficult to solve a problem that is not reproducible.

  In my opinion, you should check exactly when this question appears and must try to reproduce the HDMI sound problem.
  You should concentrate on the audio source and the software that runs when you connect the laptop to the external monitor TV.

  Also I recommend that you perform the tests after the system has been recovered to factory settings.