Serious cutting problem with HDMI HD output a7s

Similar Questions

• call of hoax? -A received a call from Microsoft who said I had a serious internal problem with my laptop

  I got a phone call from someone who said yesterday that they were from Microsoft and I had a serious internal problem with my laptop. Would Microsoft ring blue like that or is this a scam call? Thank you

  Microsoft do never not solicited for calls.

  It is a common scam. Do not give them information, do not give them access to your PC and do not go to all the websites that they suggest. One moment. See:

  http://www.microsoft.com/en-gb/security/online-privacy/msname.aspx .

• Problems with HDMI output

  I have a HP G61 Notebook PC with windows 7 Home premium

  When I plug the HDMI cable into the laptop and connect it to display the output of the speakers or headphone stops. The bars of output on the mixer vloume display output from the HDMI device, but nothing independent headsets and headphones or speakers.

  What is the case can someone help?

  OK problem solved. I typed sound in the search on windows 7. Then went to the HDMI audio output and off the exit. I hope this helps someone the with this problem

• Strange problem with analog simultaneous output / input

  I use a card PCI-6221. I have an application which generates 2 waveforms (finished samples) and simultaneously records 4 channels of analog input. I am using the sample clock AO as the sample for the analog clock.

  As a test, I plugged in the first AO (AO0) all 4 channel inputs. What happens when I run the vi, it's that the first sample on the first string (AI0) has the value of the last sample that was out on AO0, of the previous generation.

  Example:

  AI0 AI1 AI2 AI3

  -0.369-0,001-0,001-0,001

  -0.001 0.062 0.062 0.062

  0.062 0,124 0,124 0,124

  etc.

  I understand that it is a problem with the relative time of update of the AO and sampling of IT.

  He has to go: AI0 read / write AO0 / read AI1 / read AI2 / read AI3.

  I use DAQmx Timing (sample clock) to specify the clock AO as the sample for the AI clock. I noticed that this has an advantage of input terminal called assets. Ah, I thought - if I put the active side to neutralize the AI always begins sampling half a clock cycle after the OD has updated. Evil. It makes absolutely no difference. Maybe the AO clock signal is a very short pulse?

  Is there a way to specify the order in which updated inputs and outputs analog / sample?

  Hi CDancer,

  Change analog output voltage is not instantaneous. It depends on the speed of scanning of the Council with the difference the tension of the previous.

  You're right that the AO sample clock is a very short pulse. As far as I remember, it is the order of 50 ns.

  Here are two ways to insert a break between the tasks of HAVE and AO:

  • Delay the first conversion of IA (AI0) regarding the sample clock HAVE: use DAQmx calendar > more > converted > sample clock delay > Delay and DelayUnits properties.
  • Delay the sample clock HAVE first with regard to the relaxation of beginning of AI: use the DAQmx > start > more > Delay and DelayUnits properties.

  Brad

• Satellite P300-150 - problems with HDMI output

  I recently reformatted my hard drive due to a nasty virus. I now put my old favourate XP Pro with service pack 3. Never had very well with Vista.
  I managed to find almost all the drivers, I think I need, but the HDMI does not work and I can't seem to find the HDMI for XP/Vista Manager only. XP is too old to support HDMI?

  Is their a fix or a piece of software that will lead the material in an XP environment?

  Hi markjj,

  Normally you n t need a special driver for the HDMI connection. It is only important to install the driver from Toshiba Web site viewing. After that, you can use the HDMI connection and switch between monitors when you press FN + F5. It s the same procedure as in Vista or other operating systems.

  So have you ever tried on XP HDMI connection?

  Test and give us some information. If it doesn't we can try to solve this problem. :)

• Toshiba 22L1334G problems with HDMI

  First of all, thanks to all for trying to help me :)

  Now let's make the problem: I bought this TV yesterday and I immediately connected on my PC (video card AMD R9 270 X) with an HDMI cable (the cable is Rev. 1.4 and less then 1,5 m).

  The global definition is very good, but I have in fact 2 problems:
  first of all, the colors are very saturated and can't do their natural even if the video card values.

  Second, the text with fonts bit if it's not black is very blurry pixeled, very difficoult to read.

  O Google searching I found similar problems for many people, but they have solved the problems, simply assign the HDMI PC input.

  Unfortunately, they used Samsung or LG screens and there in my Toshiba is not the parameter to indicate the HDMI signal PC.

  What can I do to use this device as a monitor in the right direction?

  Hello

  First of all I must say that this device isn t 22L1334G Toshiba PC monitor but it s a TV that can be connected to the computer via the available RGB (VGA) port.

  Thus, in case you want to connect a computer to this TV and want to use it as an external monitor, you should use the VGA port available

  I must say that I had the same problems in the past with blurry fonts using the HDMI port.
  I connected a device combined monitor/TV and connected my laptop to an external monitor s HDMI port.

  Blurry fonts were really a pain using office applications, but I found a solution; my device supported an additional DVI port and I was able to connect my laptop to monitor cable HDMI-DVI.

  My other monitor takes care of one other manufacturer supports additional parameters to change the sharpness of police so I can use the HDMI port.

• Problems with HDMI Port 3/4 on Toshiba 46xv733

  HY everybody,

  When I try to connect a device (PC, Xbox, or PS4) HDMI1 or HDMI2 (where everything is fine) for HDMI3 or HDMI4 I can't make them work properly. Resolution passes something a cable not only 30 Hz. When I try to change the resolution (on PC) the photo does not match the screen (for large or too small).

  I searched throu the documentation and the Web but can't find info HDMI3/HDMI4 are different from HDMI1/HDMI2.

  The TV is Toshiba 46xv733.

  Any suggestion on how to solve this problem would be highly appreciated.

  Thanks in advance

  Hello

  In [User Guide | http://www.toshiba-om.net/LCD/PDF/English/XV733-32374046-English.pdf] you can find some information that certain HDMI devices at the beginning may not work properly with your latest HDMI TV due to the adaptation of a new standard.

  In this case you must unplug your HDMI cable first, and then try the two options settings. INSTAPORT content type and turn off.
  You start HDMI source should work with your TV.

  The HDMI 3 seems to be a little different from the HDMI 1 and 2.
  3 HDMI supports digital and analog sound.
  HDMI 1 / 2 / 4 supports digital audio ONLY.

  The HDMI 3 must be used in order to receive sound from a PC connected (via HDMI to DVI cable).

• Satellite L670 - strange problems with HDMI connection

  Hello

  I experience problems when you use the hdmi connection:

  My computer: Satellite L670

  Scope: Watch movies on the LCD external (sony bravia) via hdmi

  Computer param: Clone computer - screen plugged - features full power - the screen of the laptop has been set in order to let the computer works normally when closed.

  When you play a movie with the laptop open screen, no problems. I have twice the movie, one on the computer screen and the clone on my external LCD. Perfect.
  But if I close the laptop screen (which would normally have no effect), lagging behind the film on the external display. He stops each 5 seconds for a few seconds and leaves, making it unreadable.

  Did someone had such a problem? Any suggestions?

  Your help will be appreciated.

  If you need to know everything, just ask; (o)

  Thank you.

  When this happens you noticed more often and HARD disk activity flashing LED of the HARD disk on your laptop?

• Problem with a digital output in the information of an analog input

  Hello

  I use a SCXI-1000DC module with a module of the SCXI-1600, SCXI-1531 module and SCXI-1163 module to receive an analog of an accelerometer signal and a digital signal.
  I claim that the accelerometer is constantly monitored, and the output is on when I want to, by an impulse that I comand in labview.
  I use a rate 25 k and a 12, 5K samples per channel on DAQmx Timing.

  I notice in DAQmx read, if I put a sample of hight by channel, the output is not there when I want to, and if I put a few samples per channel, I exit when I want to, but the program seems to be slow with the passage of time. I don't know how I can solve this problem!

  I'm sorry for my English, and I hope you can help me.

  Thank you

  Silvia

  Hello Silvia,.

  If you ask a larger number of samples, the labview diagram will stay longer in the DAQmx Read function, so the while loop runs slowly, and the digital output is updated less often.

  I suggest that you use 2 separate while loops: one for the analog input and the other for digital output, so that each loop might run at a different speed.

  Best regards

• New UCS-C210 problem with video monitor output

  Hi all

  We just bought a new Cisco UCS C210 M2 product for our CUCM migration to Virtual Machines. We plugged a HP monitor and a USB keyboard to start work with the UCS. Then we plugged the server to the power supply and turn on the server, the fan worked properly for his initial shot. However, I could not see the monitor up and I can't see if it boots correctly. We waited and notice that the keyboard seems to work as you can see the num and lock the scroll works.

  I unplugged the monitor of the connection of the console before the use of the foxconn connector that came with it and plugged into the DB15 port on the back. Same result the monitor does not display anything.

  So I went on the second UCS server using the same keyboard and mouse, everything works.

  Any who know this problem of the screen does not? If so, please share how to fix it.

  Otherwise, our conclusion would be that Cisco sent us a faulty hardware or it has become defective during the transport.

  Thank you best regards &,.

  Ramon

  OK fans turn upwards and then downwards with the lights on the front would indicate to me that the server itself is ok and boot up normally. The fact that you have used this monitor UCS one another in the same way seems to indicate that the problem is probably with this server and a video on the issue. I suggest to open a TAC case and include these steps you have taken. If you can, try reinstalling all your memory and boot up the server again.

  I hope this helps.

  Sent by Cisco Support technique iPhone App

• serious security problem with background app refresh (i5 - ios9.2)

  Just discovered that my iphone 5 (ios 9.2) do not listen to update background app at the level settings or individual app phone.

  In my case, "Whatsapp' application is able to bypass this setting (which is defined to restrict the level of the phone or app) but it is still able to download the messages as long as the phone is attached to wifi

  Please note: this is not a bug in whats app - it's a bug with ios 9.2 - that I can confirm with my phone and tested.

  I really hope that apple engineers are aware of this and put a fix as soon as possible.

  Another drawback of this is, it drains dough at least 30-40% more per day!

  Say to Apple.

  http://www.Apple.com/feedback/iPhone.html

• Problem with the conditional tags in printed output

  I write help files for different versions of our software - version 4 and 5 using Robohelp for HTML 5.0.2
  
  There is a large overlap of information between the two, so I use a help file joint with marked topics that are specific to version 4 or version 5.
  
  I went out and then use with 'NOT v4' or "NOT v5" as the conditional tags.
  
  It works fine in the HTML output. However, I encountered problems with the printed output.
  
  Ideally, I want the help file using the option "generate the single document" because it means that the document produced, without the single output field. However, when I do, the tags conditional build fail and I get a piecemeal result.
  
  If I generate the document by using the option 'generate individual documents' tags conditional build work, but I get the only field I want to avoid.
  
  Does anyone know how to get the conditional tags to work when the option "generate the single document" is selected?

  Pierre and HKabaker - thanks for your comments.

  I think I have the answer now.

  In the properties for the SSL Print dialog, the third screen is the dialogue of section layout. I had removed some sections in the right pane (for example, the default title page, glossary, and index) because I did not want them to appear in the final printed output. It seems that without these sections present conditional compilation tags do not work correctly when the document is released by using the option 'generate a single document ".

  I started again with a "blank" printing of SSL version. Conditional constructions using the "generate a single document" appear to work fine when I leave the dialog layout intact section.

  I can even do the conditional tags build an injustice because the option "generate a single document" (after that I made the changes in the dialog layout section) seems to be that some of the chapters in the table of contents and omitting others.

• Problem with the volume on Satellite Z30 control - A

  Hello

  I have a problem with the analog output sound on my A - Z30 (internal and line/headphone speakers). If for example I play music I see a clearly weak signal volume on the fader control of volume in my Win 8.1 source volume control. But on the master fader, I get a completely saturated and distorted signal. Even down to the time source and output does not help... it just sounds horrible.

  See: link: [https://dl.dropboxusercontent.com/u/30325547/SoundProblem.jpg] (sorry, it's a German system)

  Here we can see that the (extreme right) music player delivers a signal of low volume, while the master fader (left) receives a 100% volume distorted signal.

  If I use external speakers that connect via USB (Logitech Z305) it works perfectly.

  I have already uninstalled and reinstalled the latest version of the drivers for my sound card. But this problem is very persistent. It seems that something pulls the signal up, but I can't find any control that turns off.

  I'm not completely sure when that started, but it can be connected with the beginning of the use of a USB headset. But I already uninstalled this software once again, but that did not help as well.

  Any idea?

  Thank you very much

  PHILIPPE

  Hello

  According to the specifications of the laptop and drivers available on the Toshiba driver page, this laptop supports the Realtek sound card.
  That's why the Realtek HD audio Manager software should be available in the control panel.

  Realtek HD audio Manager provides different parameters as well as the speaker of the configuration options to get the best sound performance.

  In addition, computers laptop Toshiba are preinstalled with a sound tool DTS/Soft
  This software provides audio improvements in your computer.

  To be honest, I not quite sure what which could affect your sound volume, but the mentioned tools and configuration should be checked permanently m.

• Problem with first decoding or preview files using Canon DSLR on PC

  Use: First CS5.5

  Problems on laptops and desktop

  Laptop: 12 GB RAM

  Intel: i7

  1.5 GB of Nvidia

  Office: 16 GB of RAM

  Intel: i7

  SSD: 256

  GTX 470

  Is not all clips, but probably 1/5th clips will have 3 or 4 frames of the clamp of the screen randomly corrupt pixels.  See this gif (ignore the interlaced effect), on the lower part. http://i.imgur.com/Kx5Yb.gif

  It is with DSLR no transcoding to 1080 p, 23.976

  If I go into the source file, it plays fine on VLC and Quicktime.  If I delete and re-import the clip, it does the same thing.  If I delete, rename, import the clip, it does the same thing.

  Need help please, it is a puzzle to me.  Transcoding is not an ideal solution.

  Your file is broken. Despite having said that it plays in QuickTime, it does not work:

  

  It's a little more difficult to notice in QT Player, but it is there; It is easier to notice if you move through levels, frame-by-frame in the clip with the arrow keys left and right.

  So, it's not a matter of Premiere Pro; There is something causing your clips corrupted. My first guess would be a bad CF card, but it could be something as Benin as a copy process borked (CF on hard disk) to something as serious a problem with your digital SLR. I don't think there is anyway to fix these files; My usual stuff did not work, which suggests that it is not a problem of container, but a problem with the video stream itself real.

  Bad luck.

• 13 d-0016nl envy: problems with the HDMI audio

  Dear Sirs,

  Due to some problems with an engineering program I had to reinstall Windows 10 on my laptop. The version of Windows is the same of the one installed on the laptop when I bought it. Before the laptop with HDMI audio installation worked fine, but then, while the HDMI video continues to work well, the audio turns off directly from the laptop, such that the cable was not connected.

  I tried to activate the 'reproduction devices' HDMI connection, but I'm not able to do this because it's as if the cable is not connected, and the HDMI connection icon appears as gray.

  I tried to update the audio driver, but it didn't work, so I tried to download and install the latest version of these drivers from the hp site but neither this worked.

  Can you help me? The laptop is quite new and I would like to solve this problem without using 2 different cables to connect also a speaker with a cable to the because the HDMI does not work as it should.

  Thanks in advance,

  Martina.

  You are the very welcome, Martina.

  It would be the graphics driver you need install the HDMI audio driver...

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  http://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74569.exe