Satellite Pro A120SE and Dynadock (PA3541E)

Similar Questions

• Cannot start the Satellite Pro A120SE-180

  Support the necessary computer startup.

  I have a Satellite Pro A120SE-180. I took out the RAM to check how much I had. Then, I opened the battery compartment without thinking about the consequences. Now I get just a power indicator and that it will not start at all.

  I can't open the disk drive or get any life out of it. I was running an upgrade of Vista, which was available as a cheap option when I bought with Windows XP.

  Hi Rob,

  What might have happened, is that the operating system and a hard drive can have erased himself when the RAM and battery have been removed at the same time!

  The only way to fix and doing things is again to send it to a Toshiba service center and get them to look! Also, do not upgrade to Vista - I'm using XP and it seems to do the job the way it was supposed to! I intend to switch to another Satellite Pro, an A300 running Vista, but I will look for someone who can replace XP on it!

  Joe

• Satellite Pro A60 and Port Replicator

  I JUST BOUGHT A SATELLITE PRO A60 AND USB2 PORT REPLICATOR. WHEN I ATTACH MY LASERJET 1100 AND PRINT A TEST PAGE IT PRINTS WELL BUT IF I PRINT A WORD DOCUMENT IT RELEASED FOR EXAMPLE GOGGLEDYGOOK. CAN YOU HELP ME?

  Hello

  I understand your problem in this way.

  You have connected the printer via Port Replicator ports for the A60 SatPro.

  Œuvres driver and so on correctly because the test page can be printed. But when you want to print from Word the printer isn't or what do you mean by "GOGGLEDYGOOK".

  Could you describe a little more detailly and give us some more information like Toshiba shipped OS or MS based installation, Service Pack installed, the name of the printer and so on...

  When you want to validate this information, it would be easier to help you!

  Bob

• Satellite Pro L40 and it crashes and freezes

  Hi guys

  I have a Satellite Pro L40 and it crashed on me a few weeks ago.
  It will turn upward, but everything freezes.

  They gave me a copy of Vista to friend, but this only loads until it said 74.5 MB necessary and only 74.4 on the partition so I guess it does not load the full program of vista.

  I don't have the original backup drive so cannot use it.
  Is my only need to get a new hard drive and if what kind do you recommend.

  Sorry if I have'nt it explains very well

  Derek

  In my opinion, it is always good to have original Toshiba DVD facilities. If you want to order a visit https://backupmedia.toshiba.eu/landing.aspx, and how much you should pay for it.

  As Akuma wrote before starting installation Vista delete existing partitions, create new and install Vista on it. I don't think that you need a new HARD drive.

• Satellite Pro 6000 and Windows Vista

  I bought a Satellite Pro 6000 and I want to put Windows Vista on it. I did an Upgrade Advisor and I was told that this graphics card will not work. Is this true?

  Thanks, Nick

  I'm afraid that's true. Satellite Pro 6000 is old enough for laptop and it will not supported in Vista. Install Windows XP Home edition and enjoy your life.

• The maximum size of HARD drive the BIOS sees in Satellite Pro 4200 and 4300 series systems

  I want to switch the HARD disk in my Satellite Pro 4340. I know the 4200 and 4300 SP series can take at least a 20 GB HARD drive that I've already updated a SP4270 and SP4280 drives from 20GB already.

  I did a search on assignments earlier re. Satellite Pro 4200 and computers portable 4300 series as various other contributors of this forum had already asked this question. A respondent suggested that they had installed a 60 GB HARD disk without problem.

  Someone at - it else mounted a big HARD drive (or more even) in these notebooks series 4200 and 4300 and managed to do work OK and had the BIOS to recognize the total size of the HARD drive?

  What is the largest swap HDD that someone did with success on these machines of 4200/4300?

  Unfortunately, you will not be able to find accurate information about it. All you can find are reports from other users. I am really interested about other views.

  By the way: 60 GB HARD drive is not sufficient for you?

• In UK buy Satellite Pro M40 and restore it

  : ^ 0 Hi everyone!

  Anyone know of any where in England who would buy my Toshiba Satellite Pro M40 and rehabilitate it and then sell it on?

  Thank you :D

  Want to sell your laptop Pro Satellite M40?

• Satellite Pro 4200 and wrong screen resolution

  OK, so I have an old Toshiba Satellite Pro 4200 and I m running windows xp professional on it and I ve been wondering because many programs do not work on it because of the resolution of the screen I want to know if there is a way to change.
  I know usually you access properties etc but when I try to drag, he does not slide remains at 800 x 600.

  So if anyone can help me on what I d really really really appreciate it.

  I'm pretty sure you don't l l install the display driver. It is necessary to use solutions above 800 x 600 screen.

  The drivers, you can download a Toshiba site but don t forget to look in the * Archives * because your laptop is not the most recent:
  http://EU.computers.Toshiba-Europe.com

• What is the difference between the Satellite Pro 4200 and 4300 series?

  As mentioned in another thread, I have a SP4220XCDT that died on me.

  I bought a mobo on ebay which was a 4290 and today it happened, but the problem was that there was an apparently fixed CPU, which stands out much less of the Council than that of the Board of Directors 4220 and therefore does not connect with my 4220 cooling mechanism.

  At least something comes on when I start now, but unfortunately he has passed the Toshiba screen that tells you to press F2 for boot sequence.

  Having also spent money on a new CPU and memory, I don't want it let go and I've seen a motherboard available suitable for a 4320/40/60 - does anyone know if it will agree with the rest of my 4220? It doesn't have a cpu so presumably will have the same mechanism as the motherboard 4220.

  I'm assuming that these may be compatible since I managed to find a pdf of a service manual that covers both the 4200 and 4300, although unfortunately the first page is missing, so I don't ' know if that highlights any differences.

  It's frustrating that there's no PDF for these older models, at least with the plug on them, and it is very difficult to find info.

  As usual, thanks for any help!

  Hello

  As far as I know the two series using the Intel Mobile Pentium III with MMX microprocessor? Technology.

  I discovered these details:

  Satellite 4260 series: Mobile Pentium III 450 MHz
  4270 satellite series: Intel Mobile Celeron 500 MHz
  Satellite 4280 series: Mobile Pentium III 500 MHz

  Satellite 4320 series: Mobile Pentium III 600 MHz with Intel SpeedStep technology
  Satellite 4340 series: Mobile Pentium III 650 MHz with Intel SpeedStep technology

  Portable measures should be also the same. So in my opinion, it should be possible to use the same motherboard for Satellite Pro 4200 and 4300.

• Problem with the Satellite Pro 2100 and new modules of RAM

  Hello

  I have a Toshiba Satellite Pro 2100 and I have a problem with the memory upgrade.
  My notebook of startup only if a plug-in module to a ddr, but if I insert the two modules IN CC led orange flashing start when I try to turn on the pc. The stop led not blinking unless I take out the battery and the dc adapter.
  Here is the code of the modules:
  KTT3614/256 (original)
  KVR266X64SC25/256
  256 MB pc2100 both.
  Starting the PC with any of them, as well as the modules are both compatible.

  Any ideas?
  (Sorry for my English but I'm Italian: D)

  Post edited by: DaK_TaLeS

  Hello

  the second location of memory perhaps is the problem.
  Try to start with a module in the second slot, first an empty slot.

  Good bye

• Satellite Pro L10 and Windows 7 drivers

  Hi guys,.

  I'm looking for a set of drivers for the laptop model above. I recently installed Win7, but I have no drivers for the machine at all.
  XP drivers do not work.
  If someone managed to install the drivers for this machine? I'm mainly interested in getting my wireless card working.

  I look forward to your responses.

  Thanks in advance for your responces
  Panos

  Satellite Pro L10 is old enough for laptop and I do not think that you will find all the Win7 drivers.
  According to the Toshiba - http://aps2.toshiba-tro.de/kb0/TSB9902P50000R01.htm - your laptop isn't supported Win7 and find the drivers won't be so easy.

• Satellite Pro A100 and load problems

  Hello everyone. New Member here.

  Got a huge problem with my laptop. I have a satellite pro A100-830. Part number: PSAACE-00W002EN. About 2 years ago

  I can run on the current system. But it will not work on battery. I just bought a new battery and it shows on the computer.
  I get indications are:

  battery charge amber lit.
  Light on power
  Power meter indicates the battery charge. I connected new battery and it shows 47% and now 3 hours later its still 47%
  If I unplug the power to the computer shuts down and will not work on battery.

  the AC light seems to be slightly duller than the one next to him, if that makes sense.

  Ive tried updating the BIOS etc but I'm ideas if im honest as im not a computer pro. I searched the internet but I can't find an answer

  Huge thanks in advance

  Stand by.
  We need more explanation here.

  You have the same problem with the battery and you have bought one new in the hope that everything will be OK?
  Have you noticed the same problem with the battery?
  You bought original Toshiba battery?

  In my view BIOS update won't help you much. I think electronic power is responsible for this BIOS update ahs no influence on this.

• Satellite Pro 4270 and network problems

  I just got a laptop, Toshiba Satellite Pro 4270... I installed win 98 on it and it works beautifully.

  But then I added LAN PCMCIA card in computer and wanted to do some sufring. I encountered a problem.

  In the next devices, win98 reports error handler:
  The NDIS. VXD, NTKERN. VXD or Chargers device for this device could not load the device driver. (Code 2).

  The card is 3Com Fe575C and I downloaded the latest drivers from www.3Com.com/warranty, but that did not help. I also ran regclean and reinstalled the card after that. Always the same fault. With my own laptop (win2k pro), the card works perfectly with no additional drivers, so the map itself is not defective.

  In addition, the Win98 find PCI card when starting, but I have no driver for that... Where can I get that? It does not specify which card that is...

  Hello

  I guess it is Win 98 Second Edition You are using on the 4270.
  Please go to driver download site and download the INF-update to the PC Card controller. I think this should solve your problem.

  While you are at it download the other drivers you need more.

  BR

  Tom

• Satellite Pro U200 and APPCRASH question (Disc Creator)

  I have problem in my laptop Satellite Pro U200 when I need to use Disc Creator (audio CD)

  Please help my to fix this :(

  * Details of the problem: *.

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: ToDisc.exe
  Application version: 2.0.0.8
  Application timestamp: 46440bf9
  Fault Module name: mpeg2dmx.ax
  Fault Module Version: 2.0.84.30429
  Timestamp of Module error: 3eae72af
  Exception code: c0000005
  Exception offset: 0000dff3
  OS version: 6.0.6000.2.0.0.256.6
  Locale ID: 1033
  Additional information 1: d3a3
  More information 2: fb01a2256ad7e2752c717e2443fc138c
  Additional information 3: d475
  Additional information 4: 02e2de344359c5cb9296e5c52491ddf3

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Usually the application should be removed and installed again, but how to do that with your laptop if this application is not available for download.
  In my opinion, you must remove the system und use well-known application like Nero. If you want to create audio CDs, you can also try with Windows Media Player. Yesterday, I created audio CD's for my car using WMP. It works perfectly.

  By the way: you only have this problem with CD audio?

• Satellite Pro M70 and chariging problems

  Hello everyone,

  I wonder if anyone can help me with my problem, my Satellite Pro M70 sometimes does not load when I put the charger into the socket, if I out of the power supply and leave it for 2 days I have costs for a period of time up to 20 hours, and then did the same thing.

  I tried to turn it on without the battery, to check whether the problem is with him, but he turns. So this led me to believe the problem isn t the battery.

  Can anyone help?

  > have tried to turn it on without the battery, to check if the problem is with him, but it won't turn
  You mean the power of t n for laptop up connected to the sector, but without battery plugged in?

  Hmmm, to me this looks like a bit of a problem with AC adapter or an electrical problem of power offers the Board of Directors. As you probably knew that, it is really difficult to provide suggestions without touching the laptop.

  First of all, you can check if the machine uses latest BIOS. If this isn't the case, update the BIOS.
  Check if the laptop would go also without battery and only connected to the network.

  If this does not work, then the adapter should be verified.
  If the AC adapter is ok, then, the motherboard must be verified