Satellite Pro L300 - WLAN connection stopped working

Similar Questions

• Satellite Pro L300 - touchpad does not work

  Hi all that I need help urgent because it drives me crazy. First of all, I use XP PRO. My laptop is fairly new, only around the age of 4 months, I had no problem with it at all. I formatted my laptop yesterday and reinstalled all the drivers that I downloaded here:

  http://www.ISD.Toshiba.com.au

  and everything works fine except the touchpad. I have already installed shared, utilitarian toggle the touchpad Module and I have the latest BIOS installed and reset all default settings and I made sure that the touchpad is enabled in the BIOS, but also pressing FN + F9 to enable during Windows.

  I installed the latest touchpad driver Synpatics I downloaded from the homepage of Synaptics. But for some reason any, that it does not work, I don't know what is the problem here. My touchpad worked before I formatted my laptop, it worked fine and has never had any problems. Will you please tell me what is wrong because I need to use my touchpad sometimes as well, so I can't use a mouse all the time.

  Hello

  > I installed the latest Synaptics touchpad driver that I downloaded from the home page of Synaptics
  I think that you question refers simply to the driver for the touchpad that is missing or incorrect.
  I put t know how it works on Toshiba notebook Australian, but the Toshiba European Satellite Pro L300 units needs touchpad different drivers. some use the Toshiba touchpad driver and some units need a driver for the Synaptics touchpad.

  In your case, I recommend this controlled again.

  By the way; My touchpad is always disabled so that en external mouse is connected.
  It is parameters that control it. Please check in your touchpad properties too!

• Satellite Pro L300 - sound is not working properly

  Hi all!

  Last week, I bought my Toshiba Satellite Pro L300.
  I have had no operating system with the laptop, but I had my own XP, so I changed the SATA drives in compatibility mode and installed windows XP Pro.
  (By the way this is a Vista laptop officially)
  I installed all the drivers, but I have a problem with the sound. It has a bad quality, but this isn't the biggest problem.
  If I start listening to music, the sound stops every 3-4 seconds for a fraction of a second. It's as if the processor worked (like the computer was loading, and the processor is a bit overloaded) I usually have this experience if I run many programs simultaneously on my old computer, it slows down and the music stops for a second. But on the new laptop, I run winamp, I have dp nothing but listen to the music, and I get this problem.

  Can anyone help? Is it because of XP? Or the driver does not work properly? Or I have a big problem and should go back to the store?
  Please write!

  Hello

  Did you notice HARD drive activity when this happens?
  Maybe some anti-virus works in the background.

  Maybe you can order original Toshiba recovery DVD for your laptop model. Check it out under the https://backupmedia.toshiba.eu/landing.aspx

  Using WXP only? I ask this question because I believe that you can only get to this Vista laptop.

• Satellite Pro L300 - windows xp does work on my laptop?

  Hey
  I have a toshiba satellite Pro L300 and I can install windows xp on it and will it take drivers when I install.

  Plug
  Windows Vista Home 32-bit SP1 Preuim
  2 GB of Ram
  Intel (r) Pentium (r) dual CPU T2390 1.86 GHz

  Hello

  Why do you think Win XP does not work on satellite Pro L300?
  Of course, you can install Win XP on this laptop.

  I think that you didn't read all the threads here in the forum about this theme.
  Am I wrong? I think you should take a little time and have read some threads here
  It is really useful and could learn a little more about the installation of the OS.

  PS: All the Win XP drivers are placed on the page of the European driver Toshiba ;)

• Satellite Pro M30 - WLan does not work

  My Satellite Pro M30 laptop is about 5 years old and is a refurb. Until yesterday, my wireless connection was very good. Although my wireless connection is running with high speed and it is connected, I now cant get on the internet without using the ethernet cable.

  It is certainly a problem with the laptop itself.
  A framework has changed (perhaps with a function key?) or the internel wireless card packed.

  Can anyone suggest anything I can try with the laptop first before you buy an external wireless card?

  Thank you.

  I don't think there is that you can do.

  The wireless network card appears correctly in Device Manager.
  Make sure that the wireless network card is enabled correctly (FN + F8).
  There may be a problem with the WLAN antenna. Who knows?

  Anyway, if you can't get this to work once again use small USB WLAN adapter and be happy.
  To be honest, is not bad idea because new USB WLAN glue can work with G WLAN or even N. The original WLAN card in your notebook is, I guess, old A/b.

  Good bye

• Satellite Pro M70 - wireless has stopped working

  I have a Satellite Pro M70 and the wireless stopped working. The yellow light lights up for a few seconds for the machine to wake up but then turns off. I rebooted several times, but that did not help. In your reply please clarify abbreviations - thank you!

  Post edited by: boston1

  Hello!

  Have you tried to update the driver WLAN? You can find it on the Toshiba site or portal driver WLAN:
  http://APS2.toshiba-tro.de/WLAN/

  Have you checked for yellow exclamation marks Device Manager?

  Check if the laptop WLAN switch lights up and I can disable/enable WLAN with FN + F9 on my Satellite phone.
  Check it!

  Good bye

• Satellite C660 - 115 WLan connection only works when the power cable is connected

  Hello

  A few weeks ago, I bought a Satellite C660-115. I want to surf the internet anywhere in my house without any son/cables.
  On the first day, I had this problem: when I disconnect _power_ cable, the wireless connection will stop working.

  The Web page on my screen will always be there, but a new page loading is a problem.
  It is sometimes useful to recharge (by pressing F5), - sometimes not. It is always useful to "ip address of repair", but not for long.

  The only solution is to atach regardless of how much power the battery has still the power cord.
  When I do, it is no problem whith the connection at all.
  I went back to the store where I bought it, they related to their own wireless network and they have had the same problem after a few minutes. In the shop too attach the power cable solved the problem.

  So the problem must be in my lap top, not in my network (modem or almost).

  Doesn't this all seem familiar, and if so, how can I solve this?

  I hope that my English is understandable, I live in Holland.
  Thanks in advance!

  Here is the solution:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59177

  Change options for saving for the Wlan in Windows 7 power management

• Satellite Pro M50: WLan connection after 10 min lost IP address

  I just bought a Satellite Pro M50.
  I can connect to the router using Congfigfree OK, but after 10 minutes or if she loses IP etc.
  Have refresh the wireless connection to reconnect.
  This continues every 10 minutes approximately.

  Hello

  Thanks for the information updated and nice that it works.
  As far as I know, this option is enabled in power safe during work only with batteries.
  But for better performance of Wlan this sure option should be disabled.

• Satellite A305-S6825: WLan has stopped working

  I'm in the United States. (I posted this message earlier)

  #1-I just bought Toshiba notebook a month or two ago with Vista Premium SP1.
  A day ago when I turned on the laptop, I got a notice to the effect:

  Windows Wireless Lan 802.11 Extensibility infrastructure has stopped working.

  -> Are looking for a solution later (recommended) the next time that you start the system
  -> Closed

  Those who were only two choices. I think I clicked on the first "search for a solution later.
  When I turned on laptop today, I got the same message.

  Anyone know what could be wrong with this new laptop?
  I use the wireless to enter IE7 and type your message.

  My husband and I are elderly and not too familiar with computers or computer language so if anyone has an answer, please make it simple enough for us to understand.

  We hope that this new laptop is not already broken.
  We cannot afford to buy another computer or have it repaired.

  #2-we tried to send questions by e-mail to MS, but they asked the PID. We looked in Control Panel and system (I think) and typed in the PID of there (OEM number), but it would not recognize MS.

  Can someone please help?
  Thank you very much.
  Alice

  PS: We have the DSL cable attached to our desktop (modem/router) and use this Toshiba laptop with modem/router of this office to get online (don't know if that is the correct terminology that someone else connected DSL, etc.).

  Hello Bob

  I agree with Kody and I think also there is a software problem or the WIFI network is not properly enabled. I use the European model of laptop, but I don't think that there is some difference of laptop models to the United States.

  If you want to use the WLAN, it must be enabled correctly. At first make sure that the WLAN switch is placed in position ON. The WLAN led should be on. After doing this using FN + F8 key combination to activate the wireless network card. When you press the FN key and keep down. Maps flash in high must be indicated. Always keep the button FN, but press F8 and select Wi - Fi ON.

  So now the wireless network card must be activated, and you should also be able to connect to your WLAN.
  If the problem persists, you can try to roll back the OS to an earlier time (when the network WIFI works well). To do this, you must start System Restore tool. Choose different restore point and to the next day when you think about the WIFI worked well.

  Sorry, but for now I have a better idea because I don't want to confuse you more than necessary.

  Have a good day and I hope that WIFI works well again.

• Satellite Pro M70 - cooling fan stopped working

  Hello

  I have a laptop M70, I have recently identified as not very hot when in use. I have now identified that the fan has stopped working.

  Any ideas how I can get this fan, so I give it a clean and check that the connected fan isn't loose etc.?

  Thank you

  Are you sure that your cooling module has stopped working 100%?
  Maybe the cooling module is ok but cannot run with maximum performance and can not cool the CPU correctly because of the dust and debris inside the laptop?
  What do you think of this theory?

  I can tell you that I read a lot of stories and gossip on overheating problems and be more honest to these issues could be solved by cleaning fans.

  I clean my cooling fans from time to time with a jet of compressed air.
  These sprays are professional tools and can be purchased in most dealers specialized computers.

  But if the fan has stopped working and then a jet of compressed air will not help you.
  In this case, a technician must check the laptop.

  Maybe the laptop must completely disassemble to remove and replace the defective part.
  This procedure is really tricky and must be performed by a technician for laptop.

  Good luck buddy

• On Satellite Pro P300 touchpad has stopped working

  Hello.

  I have a Satellite Pro P300 equipped of Vista and the scrolling feature broke on my machane too.
  I also lost the touchpad icon in my taskbar and function to configure the touchpad.

  I've uninstalled and reinstalled the drivers, nothing works.

  If I had more hair, I would probably be pulling it. Help, please.

  Thank you

  Hello

  What drivers you have reinstalled exactly? Normally, you can download all the drivers from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Have you tested the scrolling feature using an external mouse?

• Satellite Pro A300 - 2C5 has stopped working

  Hello

  I have a problem with my Toshiba Pro A300 - 2C5.
  It stopped working today.

  I have paid a top tea but removed is as fast as possible but a little water got inside my laptop.
  He worked for a while, I turned off and it works again an hour later, but unfortunately it has stopped working.

  When I try to turn it on, the syptoms are as follows:
  -the only light that shines is a power indicator light
  -l' screen does not work at all (it stays black and went offshore)
  -fan works
  -It seems hard disk does not work if Windows does not start
  -the keyboard does not work, when I hit tke keys nothing happenes, I tested the Caps Lock key, but not flashing
  -computer does not read my camera memory card

  What shoul I do to get it working again? :(
  Any help appreciated.

  K.

  Hello

  The anomaly can be related to different laptop parts in the worst case the liquid spill damage the motherboard and you will need to replace the part.
  In the best cases, it could be a RAM error as it happens to one of my friends.
  He spilled coke on the keyboard and after awhile the laptop could not turn on.
  We checked memory sharp and replaced both modules with new RAM modules and this fixed the problem

  You can try this also maybe it helps if all other parts should be checked by a technician of the ASP.

• Satellite Pro L20: WLan connection is limited to 5 meters

  Hello
  My Satelite Pro L20 is connected to the Orange livebox, but cannot go further than 5 meters and disconnected. Any help?

  Hello

  One question;
  Where is placed the WLan router?
  In the same room you book or are the walls between the router and the wireless network card.

  Sometimes, this could be a reason for a lower range of WLan.
  But we must try first of all to enable full implementation of card WLan.

  Please enter the WLan card properties. (Device Manager-> right click on the WLan card-> properties)
  There you can select the Advanced tab. You should see the power of the economy option of-> please turn it off.
  In addition, you should find there more options that could increase the range of WLan and performance. Please check.

  Of course a new version of the wireless network card could also improve the performance of the WLan card.
  I m not sure what card have you use but please consult the WLan and Toshiba card manufacturing site.

• Satellite Pro L550 - WLAN does not work after Installation Win 7/64 Pro News

  Hello

  I installed a true Win 7 / 64 professional version full on my Satellite Pro L550-199, PSLW9E. Now, I can't turn on my WLAN. There is no such thing as the large buttons-FN. I tried a lot of driver, that I found on the Toshiba Support page.
  Whitch is the right, or Win 7 / 64 professional not supported with WLAN?
  How can I pass on WLAN without the FN key?

  Lenny

  Hello

  To activate the WLan, you need to install the Wlan driver first.
  The wireless network card is recognized correctly in the Device Manager?
  Otherwise, install the WLan driver compatible; As much as I know the WLan card is Realtek RTL8191SE 802.11bgn

  Then once the Wlan card is recognized correctly, you must install the VAP (value added package) and Flash Cards support utility!
  These two tools are required to operate the FN keys and switch WLan using Fn + F8!

• Satellite Pro L300: WLAN isn't in Device Manager and is missing

  Hello

  I have a Toshiba L300 which I've downgraded from Vista to months ago WXP. So I decided to stay with Vista and when I installed Vista the WLAN was missing in Device Manager and it didn't work. I tried to download drivers Toshiba download drivers adapters and don't always work. Only my Ethernet is showing in Manager device... btw, I have a Realtek WLAN

  Also, my VGA graphics card didn't seem to update driver and when it does it is said that the system is below minimum specifications.
  It's so weird in Windows XP Home edition, it was working fine... All solutions?

  > I tried to download drivers Toshiba download drivers adapters and don't always work.
  Does that mean exactly? Have you installed driver WLAN or not? Wireless network adapter correctly installed and listed in device as a card Realtek WLAN Manager?
  How do understand you?
  You have problems to install the wireless network adapter or configure the WIFI connection?

  If the wireless network adapter is installed correctly activate the card with the WLAN switch and then use the FN + F8 key combination and make sure card is set on IT.

  Which driver to install display? What version?