Satellite Pro U400 - Wireless do not pick up some SSID

You just bought a brand-new U400 delivered to one of our directors - see its SSID home (not hidden!) his other laptop (a DELL) is fine and can also see about 5 or so neighbors WAP - the toshiba sees nothing!

When I put up here for the field etc. he picked up fine from our WAP - I lived a few things such as automatic wireless service checking is enabled and automatic.

Do I have to import a profile or y at - it a update available: problem is only way to truly test it if I drive 3 hours at his home!

There a problem free router Siemens of Tiscali - is there a knowledge in conflict - need to change channels.

Checking for interference problems, but it wasn't a problem with the printer DELL nor his blackberry or other devices have been roaming.

Help, please!

Thank you

Hello!

First of all, I would recommend updating the driver WLAN. Maybe on the Toshiba laptop is an older version installed that doesn't recognize all routers. A new driver, you can download it here:
http://EU.computers.Toshiba-Europe.com/-online decision-making supported Downloads & => Download drivers

If you are using Vista, you must disable the saving energy of the wireless network card. You can do this in the Vista power management.

Finally, and especially as Akuma said change you channel. Maybe it works.

Good bye

Tags: Toshiba

Similar Questions

  • Re: Satellite Pro U400 - Windows could not start, how to recover?

    I hope this is the right forum to display this property (if not, please let me know where I should post this) and nude w / a beginner like me. Any help or direction will be appreciated.

    I have a Toshiba Satellite Pro U400-160 is more than a year. I have not used a lot lately, because I usually use my netbook computer for day to day stuff, but the Toshiba contains some files I want to see lost. That's the message that came when I turned on my laptop for the last time:

    "Unable to start Windows. A recent hardware or software change might be the cause.
    To solve the problem:
    1. Insert your Windows installation disc and restart the computer.
    2. choose your language settings, and then click Next.
    3. click on "repair your computer".

    If you do not have the disk, contact your system administrator or computer manufacturer for assistance

    File: \Boot\BCD
    Status: 0xc000000f
    Info: An error occurred trying to read the boot configuration data. "

    Usually, I store all my software as a whole but I recently changed from home and for the life of me, I can't find the Toshiba recovery system disk. Even if I did, however, which would mean losing all files on my computer?
    My question is, is there a way to fix this without losing all data? Should I first try to save the data somehow and then solve the problem? And finally, how to solve this problem with/without the recovery CD?

    Thanks in advance. Any help will be MUCH appreciated.
    PS. This look is like a virus? What is a windows update that has corrupted some files?

    Hi monstarika,

    You can access the Windows Advanced Boot menu and boot into safe mode?
    If so try also to start the recovery of HARD drive if you choose fix my computer. If the operating system preinstalled by Toshiba is still installed, you can use this feature.

    If this work of t doesn't and you don t have the recovery disc, you can order directly in an enw one of Toshiba. That s no problem because you can order it online here:
    https://backupmedia.Toshiba.EU/landing.aspx

  • Satellite Pro U400 - BT does not work after installing Win 7

    Hello.

    I have a problem with my bluetooth device. I have Toshiba Satellite Pro U400.
    My previous operating system was Windows Vista business and I just replace it with Windows 7.
    Since I installed it my device Bluetooth does not work anymore.

    I have had no problems with it with my previous Windows.
    Now, the following messages will appear: "Bluetooth stack for windows by Toshiba is incompatible with this version of windows" I have windows 7 Professional.

    I tried to update the drivers, but I was told that I have the best and latest drivers.

    Can someone help me?

    Hello

    Seems that you are still using an old battery Bluetooth.
    You this should remove the system and need to install a new one which you can download here:
    http://APS2.toshiba-tro.de/Bluetooth/

    You can find the pile of BT for Win 7 32 bit and 64 bit version

    Welcome them

  • Satellite Pro L40 Wireless does not and wont stop correctly

    Hello
    just got a Satellite Pro L40-15 1 week ago and it's been downhill.

    The Wireless does not work (and yes the switch is activated and drivers installed). Sometimes windows recognizes no device when I boot.

    And when I stopped he said blocking down, but crashes just on this screen.

    Now, I'm an advanced user, so I've tried many things. Can anyone help?

    Thank you

    As a first step, I would recommend to use the Toshiba Recovery CD and renew the operating system.
    Then update the Vista of the State. I mean to install patches and fixes Vista all published.

    Check this thread:
    http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=107665

    Here you can see that a missing patches can have a bad influence on the wireless network card and the entire operating system!

    Good luck

  • Satellite Pro S300 - Wireless do not work

    Hi, I bought a Toshiba Satellite Pro S300 computer.

    The problem is that I downgrade it great of Vista to XP Professional and now when I install Vista on Wireless Manager 5 wount work. Its says "enabeling Radio."

    Please somebody help me and sorry for my bad English

    Hello

    You need to install the Toshiba value added software and install the Manager of power RF 3 G. Without these programs the map lights.

    Concerning

    Phil

  • Satellite Pro A200: Wireless does not work

    Hello

    Got a Satellite Pro A200 2 weeks and the wireless worked well.
    Then after a week there was a problem, try to connect. I was able to reboot the pc and he was able to connect.

    Now it just doesn't quite work.
    I can connect through the LAN and I have another laptop that connects to the router with no problems.

    I checked in the Device Manager, the wireless card works correctly and I've updated the drivers for it but no. - GB.

    Any help would be great.
    see you soon

    Hello

    Try to remove the network adapter from Device Manager wireless.
    Then restart the computer and reinstall newest WLan driver that you can download on the page of the Toshiba driver!

    Second, you could try to set up the WiFi network using an Intel ProSet Utility (but only if you have a Wlan Intel card.)

    If you have an Atheros Wlan card, then try using the Atheros Client utility for configuring Wlan

  • Satellite Pro 6100 Wireless does not work after restoring from HARD drive

    After that restore disks for installing a new HD and use and to update XP sp2, the Wireless does not work and if the card is installed XP hangs then works in fits and starts. If the card not in place, not bad at all.

    Booting from a Linux CD, the card works perfectly! I assume that the driver is the problem. The wireless card is the original, an Agere MPC13A-20/R, with Toshiba p/n PA317U-1MPC.

    I have found some drivers Agere, but am not sure

    (1) if they are correct
    (2) how to install since the machine works in a way limited with the card in place.

    Any advice?

    Hello

    I checked the page of the pilot and the only available for Windows XP WLan driver is the driver of v.1.11.108 Agere.

    (1) just try to install this driver. If the driver is not correct or is not compatible, then windows will not install the driver and you will receive a notification. You just have to try

    (2) generally you may reinstall the driver from the Device Manager. Open network controller tree, and then you can reinstall the driver.

    But this is only possible if the windows started successfully

    PS: Have you checked the information of Microsoft Windows XP SP2 update on the page of the Toshiba driver.
    I discovered that you need to update several utilities if you have installed SP2 on this laptop.

  • Satellite Pro U400 - WXP does not start & cannot run recovery is

    Help please!

    I tried running the recovery disc using the F12 key, I kept getting WARNING 'this HARD drive is not initialized' - initialize HARD drive & restart. are you sure you want to continue? I clicked on Yes-error F3e1000001 (HDD not not found) - I clicked on none he turned off the computer!

    I tried a different way by pressing the 0 im power on, because then I can no longer load window XP, it automatically runs 'Virtual disk Image', then by loading the tool recovery & followed the same HDD warning is not initialized & etc. and then eventually turn off the laptop itself!

    Please help if you can! Thank you!

    Hello

    I guess that your HARD drive is defective.
    The HARD drive is recognized in the BIOS?

    If this is not the case, replace the HARD drive and then try the recovery disk.

  • Re: Satellite Pro U400: voice is not received correctly using Skype

    Hello!
    I have a little problem with my laptop. When I talk with Skype, you use an external microphone, my voice is not received correctly.
    This only happens with my laptop and only with Skype.

    I tried to change the ADSL line and a microphone, but my voice is always received intermittently.
    How can I solve this problem?

    Thanks a lot for your help! Bye,.
    Davide.

    Hello!

    Have you updated Skype to the latest version? Visit the site of the factory for an update.

    Try to update the audio driver on your laptop. You can find it on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Sorry, but for the moment I can say more about it.

    Good bye

  • Satellite Pro U400-13O: can not enter TrueSuite without the fingerprint

    After having downgraded to WinXP
    I deferred to configure my fingerprints.

    On one occasion, I agreed to store a password in TrueSuite.
    Now I can't enter TrueSuite more because the software waits to read my fingerprints for the purpose of verification of the user - it is not yet registered.

    There is no possibility to enter my password user or such.

    What can I do - just uninstall/reinstall the program?

    Can I reinstall the program from the CD to downgrade, or would it reinstall the system?

    Hello

    Usually, you can also use the passwords stored in the logo of the OS.
    If you don t want to use fingerprint authentication, but prefer to use the press focused on the keyboard system BACK SPACE key when the screen of fingerprint authentication system startup is displayed. This allows to switch the password entry to the basic one keyboard screen.

    Please note that you can find all information and details in the chapter 4 user manual

  • Satellite Pro U400-130 will not stay in sleep or Hibernate

    Hello

    My laptop don't stay in sleep or hibernation. I use Win XP
    Within 60 seconds it enter standby or hibernation mode it re-sboots!

    It is connected to an optical mouse of WiFi, a hub, the power adaptoer and speakers - all these fact don't disconnect any differnece.
    HELP!, through the

    Hey Buddy,

    Please check the BIOS for the following options:

    -Wake up on keyboard
    -Wake up on LAN
    Sleep - USB & Charge

    If you find these options, disable it in the BIOS. After that the laptop should stay in standby or hibernation properly. :)

  • Need driver for Satellite Pro U400 PSU413 wireless

    Hello

    I have a satellite Pro U400, PSU413. He recently a blue screen is dead and has since had to be formatted and reinstalled.

    I have a problem with the installation of the wireless drivers.
    Those listed in the section downloads for this model does not work and the user of the laptop will be lost without wire.

    The file to download from the toshiba site is http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fwlesslan-20080530073920.zip

    I have downloaded/extract and run installation, I also tried to install the driver manually, but windows is not interested.

    Any ideas?

    Thank you

    Thanks a lot for the comments

  • Satellite Pro U400 starts not-cannot start Windows

    So I have no idea what caused this minute, it's nice, I look at things on the next screen thing 4od is empty and not coming back so I hold down the power button to restart and a black "windows boot manager" is displayed and I can not fundamentally get off this page...
    It is said:
    Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

    1. Insert your windowsinstallation drive and restart your computer.
    2. choose your language settings, and then click "next".
    3. click on 'Repair yourconputer.'

    If you do not have the disk, contact your system administrator or computer manufacturer for assistance.
    File: \Boot\BCD
    Status: 0xc0000034
    Info: the windows boot configuration data file is missing required information.

    I do not have installation or recovery discs, I used another computer to burn a disc recovery ISO put it in and nothing happened.
    I would like to ring toshiba but I don't have any minutes left this month and I don't have access to another fixed telephone/phone

    I'm really confused as to what to do, each other times as my laptop is messed up, I just did a recovery of hard disk and restored to factory settings by clicking on f8 but it doesn't work this time

    I can't afford a new laptop or taking it to be repaired so if anyone knows what I can do please help!

    Thank you
    Steph.

    Post edited by: Steph92

    Oh I forgot to tell my computer toshiba laptop satellite pro u400
    It came with windows vista preinstalled

    Hello

    I think it is just a software problem (Boot Manager).
    Try to repair the operating system by using HARD disk recovery;
    Press F8 why portable power.
    Then choose fix my computer, then choose disk HARD recovery.

    If this is not possible, order the disk recovery from here:
    http://backupmedia.Toshiba.EU/landing.aspx

    Then, you will be able to reinstall the OS using the recovery disk

  • Fingerprinting is on Satellite Pro U400-160 - specified database not found

    Hello

    Well, I recently bought a Toshiba Satellite Pro U400. The first day, I took my fingerprints, and all went well.
    The next day, the software reinstalled himself for some reason any... and lost of my fingerprints.
    So I went back to the software TrueSuite Access manager, but this time I had a problem!

    ' *' Error: specified database could not be found ' n ' exact error message no, something similar.*

    I got this message, so I looked in this forum. I discovered that I could reinstall the software, so I did and got the last update, but it's the same thing.

    I don't know what to do, I just installed Office 2007 since I was the computer, nothing else.

    Help, please!
    Thank you very much

    You take the recovery disc and reinstall the OS using the Toshiba disc.
    The laptop must be set to the factory settings/configuration and then you should check if the same error message again.

  • Satellite Pro U400 - audio quality is not good

    OK this problem has been plaging me for years. I have a Toshiba Satellite Pro U400 windows 8.1.

    The sound quality is terrible.
    I can remember it's bad in windows 7.

    Contextant driver is bad, and so is the generic driver windows 8.1.

    Help, please

    To be honest, I have no idea what you mean exactly by the quality is terrible.
    I've owned a notebook Satellite U400 happened and I have to say that the sound quality was quite good.

    Satellite U400 is a small portable 13.3 and the speakers have been adjusted to the dimensions of the laptop.
    The Conexant audio chip is part of the motherboard and you will not be able to replace it.

    If you want to use another sound card, you can try to use an external USB audio interface.
    I use this external sound solution for my home recording studio.

    The audio interface is connected to the USB port of the laptop s and the external speakers are initiated for the external audio interface.

    By the way: isn't Satellite U400 is the list of the supported 8.1 notebooks... Win so you won't find not all drivers Win 8.1 for this unit on the Toshiba driver website.

Maybe you are looking for