Scan size

Similar Questions

• This officejet pro 8600 is not duplex scan size of different pages, only the size of page letter

  I have a desktop hp jet pro 8600 and printer. My original printer scanned pages front and back of different sizes, the printer stopped scanning properly and I replaced with the same model. Now, this printer can not scan other than letter size paper. I can only scan two-sided letter-size pages! The reason why I bought this printer has been for its scanning capabilities. I talked to support HP they said it scans only some dimensions of the page in duplex mode. Please HP DIFFICULTY this problem and give your customers the ability to SCAN RECTO VERSO DIFFERENT SIZES of PAGE. I've been with hp for many years, printers, laptops and a computer

  Message reads

  "The document feeder only supports analysis for some sizes of paper double-sided. If your original is too long or short, use the scanner glass.

  HP I'm supposed to use glass scanner page-by-page, I bought a officejet pro for special to spend less time scanning features manually. I wonder what the reason for this restriction of page size, it worked on my previous printer.

  I solved this problem without downgrading the firmware to version CLP1CN1232AR.

  I downloaded and installed HP Web Jetadmin to do this (www. HP.com/go /webjetadmin). Then, I followed the instructions on the manual (http://h10032.www1.hp.com/ctg/Manual/c01943164.pdf) to activate this option.

  The image I used was obtained on the HP ftp site: ftp://ftp.hp.com/pub/networking/software/pfirmware

  The name of the image is: ojpro_8600_n911_g_n_1232A_09272012.ful.rfu

  Now, I can scan both sides of the legal size.

• Size legal vs siz regular scan

  Most of my scanning UIS of regular size (8 1/2 X 11) to my computer.  However, if I scan it treats the item scanned as legal size (8 1/2 X 14).  This creates a large empty space downstairs and is a problem if I copy the scan of a regular size page.

  Is there a way to change the scanner, so it will not do this?  Scanner/prnter is a Pro Officejet 8620

  I would appreciate a response by e-mail. [Personal information]

  Thanks for any help

  Happy to hear from you @paulsc,

  Here are the screenshots for Windows 7 for you;

  • Choose the shortcut (IE save as PDF)
  • Click on Advanced settings

  

  • Next to the Scan size, adjust to the whole scanning area or the value letter * all changes made in this window should change the default selections that the effect of the front panel of the printer scanning

  

  Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• Hp HP 2542: 2542 will scan only one letter

  Hello

  I have a HP 2542, it's for my dad, he wants to use it only as a standalone Copier, no pc attached, just lift the lid put the papoer to press on print, then get a copy at the other end. How simple is that? BUT the scanner will scan only of letter size and the original is A4 so the end of Moose is off, how do I change the scanning a4 area? This should be so simple and yet I can not find where to change it! I installed the printer on my laptop, but all the settings I found said A4 already, but the printer scans stubbornly letter! I need help before the printer and hurt my foot!

  Hello
  
  Thank you for your time and yes my foot is intact! So the scan size is letter only, well that would explain why I couldn't find where it change!
  
  I think that Mr H Simpson has a word for this... Oh!
  
  Steve

• When I scan something, that part of it present in the image.

  I use a HP 3050 has J611G.  I messed with the settings to try to crop an image and now whenever I scan something, it scans only part of it.  Anyone know what I need to do?

  Hello

  Open the HP software under start > all programs > HP > printer model name.

  In respect of the actions of analysis, click on scan a Document or Photo.

  Select the shortcut used scan nd set the scan size as any scanning area, then complete the scan.

  The modified configuration will apply to this shortcut from the HP software or the front panel.

  Kind regards

  Shlomi

• HP Envy 5530: Question of scanning

  Hi there when I try to scan the overview screen appears correct, but when the scan sends to the computer, I'm not receving the whole scan and all I get is the header of the page and its very big I get 3 images with three different headers.

  Ive scanned my passport and he sent that fine and correct.

  IM now at a loss on how to continue

  Hello @Felicite,

  Welcome to the Forums of HP Support!
  
  I understand that, in the scanning of your e-all-in-one printer of HP ENVY 5530 to your computer Windows 8 you are not able to get the scanning full page appears correctly on your computer. I would like to help you to solve this problem today. The HP scanning software is probably set to an option of cropping so rather than scan the entire document into your computer, the software is cropping some sections. To ensure that all HP scanning settings are configured correctly for the scans of success please can I you follow the steps below.

  1. on the desktop of your computer, please click on the HP Envy printer Assistant icon

  

  2. When The HP Printer Wizard opens, click scan a Document or Photo

  

  3. in the HP scanning software click Photo to the file or Document to the file and check the setting of the Scan size above left. Try this setting on any scanning area.

  

  4. prior to Scan, click on Advanced settings down right. In the window parameters advanced search to optimize the quality of the Image at the top. If this box is checked, please uncheck it. If it is not checked, please check. To the substantive aspect for car culture. If this box is checked, please uncheck. If it is currently disabled, please check. Click OK at the bottom. Click analysis.

  

  Scan from the front panel of your printer will mimic just the settings under the HP software on your computer. Once you set the settings in the HP scanning software they should take effect when you scan from the front panel of your printer.

  Please let me know if these steps don't resolve your problem. Good luck!

• screen half of the photo to scan deskjet3520

  When I scan to computer and select jpeg the scanner only moving to halfway across the unit, but if I select a pdf file, it will go all the way through the aircraft.
  On the computer the jpeg shows only a part of the image because it did not cross the full screen?
  Hoping for more help in this matter, please.

  Hello

  Open the HP Deskejt 3520 software and click on scan a document or Photo.

  Select file / JPG in the left pane.

  Check the scan size is defined as! 4 or letter and click Scan.

  Complete the analytical work and to check differences, so try scanning forms the front panel and check for the difference.

  Shlomi

• Part of the image appears in the scanned image

  I have an officejet 6600 all-in-one printer.  Lately, whenever I try to scan the image is cut off.  Only a small part of the document appears in the final image.  The content is visible on the scanned image is in the lower right of the scanning space.  Please tell us what the steps should I take to solve this problem.  Thank you

  Hello Pierre,

  Welcome to the Forums of HP Support!

  I see you are trying to scan documents using your HP Officejet 6600, how ever you getting only a very small part of the analysis. What happens when you try to make a copy, the entire page produce on the copy?

  If the HP software, make sure that the scan size is set to sweep the area.

• OfficeJet 5740: Y at - it a Fit - to - Page Scan Option?

  When I scanned a form of Government that is located on a sheet of 8.5 "x 11", but has only a 1/4 "left, right, top of page margins and 1/8" margin on the bottom, the preview shows low 1.5"shape and the part of the text on the side cut margins.

  I selected the option "Save as PDF."

  I could not find a Fit-to-Page or by percentage of reduction options in scanning settings. I found "Letter (8.5 x 11) Portrait" and options "any scanning area.  I tried all of them with the same above result.  The option "Custom scan size" condition to select a width and a length, which would have been 8.5 and 11, the same that had been previously used, specific it so was not tested.

  I need all the text on the worksheet to display.

  Hey @Erislandy,

  Thanks for getting back to me on this subject. I've experienced with the Officejets Printer Status Report that has no margin on the left side and 't' bars at the top and bottom of the page. The 't' bars are used for alignment. As a result, there are very little margin. In saying this, I'll make you confirm that the page is loaded correctly on the scanner glass.

  Place the item with the print side face down on the scanner glass, and then place it according to the guides engraved around the glass. Close the scanner cover.

  

  If you have been loading the page correctly on the glass of the scanner nothing helps, I highly recommend at this time that you contact our Technical Support telephone queue for this problem. Through our hotline, you will be able to do a session remotely with the agent who, with your permission, would allow the agent to go through the process of scanning with you and find out what is happening on your computer. It will be much easier for testing and troubleshooting for this specific problem.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  I wish you good luck going forward with this!

• OfficeJet 8600 (911) no full scan sheet A4

  How can I configure the HP OfficeJet Pro 8600 to scan an A4 page in PDF format?

  Scans sizes (i.e. the size of the scanned area) of glass are:

  JPG:
  21.6 x 29.7 cm; 8.5 x 11.7 in
  PDF:
  21.6 x 28.0 cm; 8.5 x 11.0 in

  i.e. to scan A4 document in PDF will be too short about 1/2 inch.

  ADF has produced similar results.

  The scan to PDF is format 'Letter', not 'A4' format, even if the device was announced, sold and purchased for the purpose of scanning 216 x 297 mm (8.5 x 11.7 inches) regardless of the output format.

  Pekka

  Hello

  The unit supported an A4 page scan, that need to be addressed by means of the HP scanning software.

  The software of the printer, click on scan a document or photo, and select PDF, set the Scan Source as flat glass and the scan size as A4 (equivalent to 8.3 x 11.7 inches).

  By selecting the letter will cause us a page 8.5 x 11.7 inches.

  Selection to scan the whole glass Scan will cause a page of 8,11 x 11.7 inches.

  You can see the following table as a reference, A4 is not 8.5 x 11.7 as you said:

  http://www.dpandi.com/paper/

  Kind regards

  Shlomi

• HP Deskjet Ink Advantage 3545: 3545 HP how can I scan to searchable PDF?

  Las en AIO of HP Photosmart D110 printers are posible escanear documents a "buscables" PDF (searchable PDF) instalando el software ocr_web_pack. Como puedo hacer esto in una more HP Deskjet AIO 3545?

  Hello

  The HP Deskjet 3545 do not offer the features OCR searchable PDF is not a scan size available for the HP scanning software.

  Try 3rd party NAPS2 request, a freeware PDF application that also supports the scanning OCR (indexable PDF):

  http://www.naps2.com

  Kind regards

  Shlomi

• M1212nf Scans come out huge when issued

  Hi all

  I read some posts here regarding the scans coming out in great, but none applies to the m1212nf that seems. The only option for scanning you get is "Scan." I went through all the settings, including the definition of the DPI, color mode, and the scan size. No matter what I change, when the PDF file is emitted, it comes out to about 34.44 x 45,10 inches when scanning a normal letter size paper. No matter if it's the scan to email or scan to file, this is the same result. Even using the preview TWAIN dialog box, it shows that it scans the right size ~ 8.5 x 11, but when issued in PDF format, shows like 34.44 x 45,10. I have two of them in our office, a network and a local USB. It happens on both of them on different computers, so it is not an isolated incident. If someone can you please give me any indication on how to fix this it would be appreciated.

  I had the same problem of pdf page size. They seem to have finally fixed in the new software download.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=IM-80811-4&cc=us&DLC=en&LC=en&OS=4063&product=3965849&sw_lang=

  It took more than 6 hours of time on the cat and the time on the phone with a case Manager who says that the software on the CD is the same as on the website.

  Article in THE Times today asks "Whitman can find a way to restart HP?  Well, I'd say that Meg would have just read a few forum posts and ask why they are not documented and resolved timely and why waste us time barely known issues.

• Scan more OfficeJet Pro 8600: Officejet Pro 8600 Plus resize problem

  With the help of Officejet Pro 8600 Plus to scan documents on computer in PDF format.

  I'm tring to scan a document that contains very important information just at the foot of the page, but when the scanned document appears on the computer screen, I see that he has not captured at the bottom of the original document.

  I can work out how to resize the document to the copy function, but I can't find an option to resize for scanning.

  Nobody knows the answer to my woes?

  Thank you for your help.

  Hello

  Thank you for using the forum.

  You can choose the scan size, example as shown.

  

  In addition, these videos may be useful for you:

  Scanning multiple photos:

  HP Officejet Pro 8630

  https://goo.GL/ADYDmo

  Scanning tips:

  HP Officejet Pro 8630

  https://goo.GL/fjZvqM

  Hope that helps.

• HP7520 all-in-one will not scan in the document

  I'm scanning very old recipe cards.  No matter how to activate the map, or when I put it on the screen, at least one edge is cut, including the automatic feeding system, which is my preference by train.  The cards are 3 x 5 or 4 x 6.  I can't find anywhere for this HP7520 the settings.

  Barbjth2,

  Welcome to the HP Forum.

  We know not if you want to scan in receipts in the form of images or text.

  Regardless of the end point, the following might help.

  With the complete installation of the software functionality for the printer and assuming a recent version of the Windows operating system, you should have the shortcut Wizard printer installed on your desktop.

  Double-click the Printer Wizard shortcut > scan a Document or Photo >

  Select Photo of Document OR file file (as you prefer) >

  This starts the process to create the sweep.

  On the side right of the menu, under the Scan size >

  Select, in the menu dropdown > any scanning area

  The rest of the selections can generally be left as default values, even if it's for you and your situation.

  • In order to ensure that the results meet your expectations, do not forget that the scan preview is CHECKED.

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Click on accept as Solution when the answer is a good solution or workaround!

• OfficeJet 7612: Scan 12 x 12

  I got my wife an Officejet 7612 to be able to print and scan its Scrapbook albums. I bought 13 "x 19" paper to make printing and I'm trying to scan a page 12 "x 12" scrapbook that fits on the tray to scan, but I get an error when I select a custom 12 x scan size 12. "

  Is there a way I can scan the complete, original, 12 x 12 scrapbook pages to create digital files and and print?

  Hi @kmc1mfra,

  Welcome to the Forums of HP Support! I see that you are interested in the analysis of 12 x 12 "scrapbook pages with your HP Officejet 7612, but when you try the Scan you get an error message.

  After taking a glance in the specifications of the product for 7612 JO under the Specs of scan, it lists:

  Maximum scan of glass size: 297 x 432 mm (11.7 x 17.0 inches)

  Please make sure that you scan within the recommended size of the glass.

  For the ADF:

  ADF maximum scanning size: 216 x 356 mm (8.5 x 14.0 in.)

  I hope this helps you, please let me know if this can help.

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution" . If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.